Before cutting the steerer tube and running cables internally, I like to do a quick build with external cables and uncut steerer. Then I can ride an hour or two on the rollers to be sure everything is right before committing to the steerer length and re-running everything internally.
Just want to thank you for your videos on the Yoeleo 12 just bought one and got it about a week ago my first enigma was where is the top race for the front fork had no idea it was the C looking spacer acts as a race. You are a god send to me. Will be studying your sight to get this bike together. All my bike till now were early late 80's and 90's bikes steel frame Italian.
Excellent video, I do think the designers/manufacturers have made a mistake with this one. Yes it looks very neat, but there are thousands of older cyclists who have less flexibility so prefer a more relaxed style and that is where bikes with conventional stems come in helpful with the option of being able to swap and change to get the right degree rise for best comfort, but that is impossible with this integrated stem so I think sales will be reduced.
@@adamkubiak1933 Yeah, you are absolutely right. I can only confirm it's as stiff as a Cannondale C3 460mm wide handlebar that came with my Cannondale Synapse Carbon Disc 105 bike.
The compression plugs should be long enough to go past the top bearing. That's where they snap so you'd get a bit of a second chance if the plug was hanging on inside. They don't seem to do it though.
Hi, thank you for your videos. I would like to upgrade my Merida scultura disk bike with this handlebar but I wondered if you can install this in an usual frame in order to hide the cables changing the top bearing headset and the whasers. Thanks so much and grettings from Spain
@@stevenleffanue thank you so much. I must check it, my fork tube is 1 1/8" so I think is possible. Last question. Are the special washers included with the hadlebar o you must buy separatly? Thanks for your patience
IMO, the best part of integrated bar/stems is the fact that the bar cannot slip. I once had my carbon bar slip from the stem when I hit a pothole at an intersection. I almost ended up under a car, because my bar was now facing downwards, and almost impossible to operate. I barely managed to stop the bike safely to adjust/tighten it.
Hi Oz I would like to ask you for your advice. Should I put some carbon gripper paste into of steerer tube (fork) where the wedge expander is seated? I have had Canyon H 31 Cockpit and when I wanted to set up cockpit up or down I could not tighten the cap screw. The screw started cracking and plastic liner has been broken. The wedge expander been pulled up. That means that I wanted to tighten the cap screw for 2 Nm and the wedge expander is pulled up through cap screw. Thank you very much I appreciate your help. Kind regards. Libor Nemcok
@@stevenleffanue Thank you Oz, do you think that would be possible after application of carbon gripper to tighten the wedge expander more? There is limit 4 Nm may I use for example 4,5 Nm? I do not want to wedge expander pull up by cap screw. Thanks.
As aways, great Video, and now you have 2 new Yoleos? Thats really nice! Yoeleo its a awasome brand, and im sure your videos are really good for then. Waiting for the next one, tks mate!
Hi mate i have a problem trying to figure out my internal stem cables. Road bike rim pull internal cables . I have no problem feeding them through the bars and stem. The thing i cant grasp is ,I have 3 internal plastic inner cable sleeves that i must put my front & rear & brake cable ( rim brake ). there is no cable stop for the outer cables from the stem . what cant i see or what do i fix it with. many thanks Crooky south wales UK
Hi Sir...Just need your opinion whether fully hidden cable can be made or done on Trek Domane SL5? I noticed in the earlier part of the video shown that bike. Would you advised me on how to fit a fully hidden cable on Domane. Thanks for your time mate!
*Looked at a lot of options for getting my **Latest.Bike** . Great find in SAVA. Super light, nice components, really good value as it comes with many options only found in much higher priced bikes.*
Very bad experience for me with Yoeleo. I ordered the R11. After 3 and a half months, they tell me that my frame is finally in paint and 10 days later, Yoeleo tells me that they no longer have... the frame in stock in my size.
Great video, thanks. Do you know what the flare is on these bars? They are sized from the width at the drops, but can't tell me what the width is along the top of the bar. I currently ride Easton EC90s that are 38 c to c at the tops and 40 c to c at the drops, so want to make sure that ordering a 40cm width will give me around 38cm at the tops.
@@stevenleffanue great thanks. It sounds like you recommend Yoeleo frames and handlebars, having no concerns about quality? Are you independent and just like the brand or are you endorsed by them in any way?
Super informative series of videos re internal cable routing. Thanks! I’m really struggling to find headset for internal cable routing as in your video. Can you help with the link where can I buy it? Thanks!
Hi Oz, I have a pair of the metron 5D ACR that I am just now realizing that the headset top that merge with the spacers is too wide for my headtube diameter, do you think that if I just run them all the way slammed, that it would be safe and reduce that kind of terrible round headset to intergrated bar stem look which is just visually wrong. Thanks!!!!
The height of the stem should accommodate your riding position. If you slam the stem it may be too low and cause inefficient riding style. Your bike fit is more important than aesthetics.
@@stevenleffanue Oh yeah it's all no problem to me as I already run it quite low regardless, do you think running it with no integrated top cap would be okay ?
Yes that should be fine once you have set your bearing compression and tightened the stem to the steerer , no top cap necessary, although if it rains water will enter your steerer tube.
You shouldn’t grease the bolts because it reduces friction. Therefore you need a higher force than the recommended Nm to get them safely secured. And to much force may damage the threat and the material.
You can actually get closer to "true" torque with greased threads: www.reliabilitysolutions.net/single-post/2015/09/21/Why-do-we-Lubricate-Threaded-Fasteners When torquing down a fastener, a lot of the work is actually done to overcome friction between the threads of the bolt and the nut. But that also means that you can overload a bolt (or undertorque) if, say, some of the threads are not cut correctly or there was a dent on one fastener. Greasing the threads gets you more consistent torques, more of the time. Having said that, you should do whatever is specified by the manufacturer, not just whatever is "common practice." Manufacturers specify how things should be torqued down - be they with grease, dry, with threadlocker, or otherwise. If the factory says do them up dry, do so.
Built up a an araya wheelset with araya rc 540 rims, DT swiss 2.0 1.8 2.0 Double butted, laced to Ultegra 6500 hubs 14 gauge spoke nipples. Big problem, the rim has lateral distortion to the side of each of the eyelets - the distortion isn't at the eyelets it's at the braking surface as if it is jittery when braking - I have close to perfect equal tension throughout. Rebuilt it again with using oil on threads and eyelet holes still same result. Gotta be over tensioned spokes causing the distortion right? I've got an average of 160 Kilograms of force on the spokes, should I reduce the tension to 117 kgf? There is no cracking of the rim, and when I de-laced it the destortion went away but when I retensioned it again it got distorted again. Could I have permanently distorted the rim? Can you give advice on this?
Yes,sounds like you have over tensioned it. Once alloy has been changed to a different shape it springs back a certain degree but will not be as it first was. Im assuming you want a stiff wheel? Use 36hole,straight 14 guage spokes.
@@stevenleffanue I've trued wheels that were out of true by 5 mm and never permanently distorted rims, how can a slight 0.05 mm distortion from over tensioning cause it to not be as it first was?
@@stevenleffanueYes, it's like the slightest little ripple on the braking serface area adjacent to each eyelet - 32 eyelets so 32 ripples 16 on each side, It's so minimal you can't true it out and when you ride the wheel it has a slight jitter when braking as a result. Had this problem on a different Araya wheel - araya VX 400 and was able to detension and rebuilt again to 173 kilograms of force and that fixed it , but with these Araya RC 540 rims it didn't work. Contacted Kerin Track store in Osaka Japan tonight waiting to see what they have to say.
Hello sir...I am waiting for my new emonda sl6 arrive. Do you think yoeleo handlebar can make cable routing in new emonda look hidden? Is it compatible?
Once you've ridden the R12, can you go downhill over 55kph? I have an R12, and suffer severe speed wobbles, I'm curious if this has anything to do with the overall stifness of the front end and fork, or if this is a wheel issue
Hey mate love the videos, its interesting that you spoke about clip on try bars, ive been trying to find something suitable for this style of handle bar but haven't had much luck, do you have any suggestions?
Just sent mine off to the builder, had some trouble with the headset bearing , the hole on the frame is a bit too small , and the internal cable routing according to my builder is troublesome to say the least
Also had to wait a rather long time for the frame and when I got it, I realised they need me to wait for an extra few days for the handlebar, all in all not the best of experience, hopefully the riding quality will be better
Integrated bars are annoying to change cables. And they tend to bend pretty tightly. I would probably go back to a normal seperate alloy bar and stem combo once I crash lol
That tunnel at the end under expressway has a strange optical illusion that looks like someone has strung a wire across it. Scared the crap out of me one ride
@@stevenleffanue Cool! Really looking foward to it because I'm really looking at the r12 or building up a winspace 1500 (with their wheel too which hambini tested to be really quick, dunno if that disc or rim), which are gonna be about the same price when you equip it out (usd). Thanks again!
We have them everywhere here (Poland). If you know the bike way, you’re fine. But whenever someone is following me I feel urged to remind them of the ballard...
@@stevenleffanue The local authorities should fix those dangerous situations! In the Netherlands you can even mandate it through the national cycling covenant...
Should fit ok then. You will also need the top headset pieces to pass cabling thru the headtube. All cables will need to exit the frame at various points. Front brake cable may need to exit at centre of handlebar.
Sadly, those that started riding in the 2020s will lust over it because that's what they usually see on bikes these days. Any other configuration, they call it external routing, even for bikes like the TCR Advanced, just because they can see brake and shift lines outside. (I hate the way they call it) I say they're naively wrong about this. If they want to talk about external routing, they should look at 20th-century road bikes. Bikes like the TCR Advanced still run internal routing as the shift and brake lines still enter the frame and fork at some point.
Hi there can I have your email pls. I have ordered yoeleo frame. I plan to purchsse shimano ultegra Di2 R8070 group set. But I confused with this part (shimano EW-SD50)...there so many choice in length...which one is matching with Yoeleo R12 frame? Thank you
oz cycle ok, tks. I think I’m going to use mechanical as well . So if I can get Shimano Ultegra R8000 plus BB 386 with 24mm crank diameter, will fit on the R12 correct?
Too conservative on steerer plug because you don't understand loading mechanisms, as most don't. How many pros have a spacer above their bars? Absolutely zero. Adding spacers above is also a good way to ruin the clean look you were trying to achieve by getting integrated bars.
8:24 in your other video you claim that compression plugs are unnecessary? You need to make up your mind (or just take that other nonsensical video offline as it's potentially dangerous to noobs).
A compression plug is required unless manufacturer states otherwise ie Canyon Aeroad. Its the top cap which is not require once stem has been tightened
@@stevenleffanue "A compression plug is required unless manufacturer states otherwise" Well then why did you not state it clearly in that other, highly misleading video?
The worst thing I see on integrated cockpit cable routing is people using cheap/generic cables. Spend the extra money and get really quality cables, like Shimano's Dura-Ace polymer cables. Not only will will it feel a lot better from less friction with all those tight bends, it'll last a lot longer before having to redo the very time arduous (and expensive if you pay a shop) process of re-cabling the bike.
@Wooly Chewbakker Unfortunately not always an option for everyone. I've seen plenty of Dura-Ace and Ultegra with whatever bulk generic cable their shop has. Really makes you wonder...
They are just making it harder and harder to work on! I do 99% of my own bike work. I’m looking to buy a new road bike it’s all disk I like rim brakes easier to work on no messy oil. 🚴
Thanks for the video! Any experience with tne Deda Alanera bars? I sent you a message on instagram. If you get a chance, I’d love your feedback. Thanks again!
I love to watch your video because everything is very straightforward without any bullshit😅
Before cutting the steerer tube and running cables internally, I like to do a quick build with external cables and uncut steerer. Then I can ride an hour or two on the rollers to be sure everything is right before committing to the steerer length and re-running everything internally.
Red and black colour scheme is just superb combination. My favourite.
I concur 100%
I like before I watch, you just know this content is gold++
I'm always looking out for the OZ Cycle videos more than others!!
Just want to thank you for your videos on the Yoeleo 12 just bought one and got it about a week ago my first enigma was where is the top race for the front fork had no idea it was the C looking spacer acts as a race. You are a god send to me. Will be studying your sight to get this bike together. All my bike till now were early late 80's and 90's bikes steel frame Italian.
Love how practical your videos are. Small thing, it is 'flare' not 'flair'.
Great video, full of info. Definitely made me thing twice before getting Intergrated bars.
Just found this channel, absolutely 1st class 👍
Great video. The bike looks awesome with those wheels and bars.
Excellent! Perfect description. We all need this information...
when I measure reach most times I measure to the hoods of the shifter. as the reach of the bar can varry when transfering from bike to bike
Good on you mate! Great content as always. Regards from Wangaratta.
I'm never going to get integrated bar/stem but I was curious how they work.
Excellent video, I do think the designers/manufacturers have made a mistake with this one. Yes it looks very neat, but there are thousands of older cyclists who have less flexibility so prefer a more relaxed style and that is where bikes with conventional stems come in helpful with the option of being able to swap and change to get the right degree rise for best comfort, but that is impossible with this integrated stem so I think sales will be reduced.
I got "The one" carbon integrated handlebar from Pro Cycling in 380mm width. I'm 88kg and it feel just as solid as a aluminium stem and handlebar.
Detmer the width...
@@adamkubiak1933 Eh..? English is my third language. Did I f*ck up somewhere?
Anyway I got this one: ruclips.net/video/NuCW4oArpUU/видео.html
Detmer at 38 cm the handlebar is rather narrow. Too narrow to judge wether products from the line are stiff.
@@adamkubiak1933 Yeah, you are absolutely right. I can only confirm it's as stiff as a Cannondale C3 460mm wide handlebar that came with my Cannondale Synapse Carbon
Disc 105 bike.
@@adamkubiak1933 There is a stiffness test for that bar on weightweenies forum.
a maintenance nightmare with little to none adjustability. good video though!
but cycle looks so amazing
The compression plugs should be long enough to go past the top bearing. That's where they snap so you'd get a bit of a second chance if the plug was hanging on inside. They don't seem to do it though.
slam your stem
Hi, thank you for your videos. I would like to upgrade my Merida scultura disk bike with this handlebar but I wondered if you can install this in an usual frame in order to hide the cables changing the top bearing headset and the whasers. Thanks so much and grettings from Spain
As long as the headtube is 1 1/2" at the top
@@stevenleffanue thank you so much. I must check it, my fork tube is 1 1/8" so I think is possible. Last question. Are the special washers included with the hadlebar o you must buy separatly? Thanks for your patience
Good day: PERFECT that exactly what I was waiting for: 👏🏻👏🏻👏🏻👏🏻👏🏻
Agreed, have been eyeing these bars off but was nervous about their stiffness. Good to see they're not a wet noodle like those last ones you reviewed.
I didn’t notice if you mention stem angle. Those appear commonly 0° in the integrated. Is that your findings as well?
-7degrees
IMO, the best part of integrated bar/stems is the fact that the bar cannot slip. I once had my carbon bar slip from the stem when I hit a pothole at an intersection. I almost ended up under a car, because my bar was now facing downwards, and almost impossible to operate. I barely managed to stop the bike safely to adjust/tighten it.
Did you use carbon paste on your handlebars? Torque spec alone isn't enough you know.
Hi Oz I would like to ask you for your advice. Should I put some carbon gripper paste into of steerer tube (fork) where the wedge expander is seated? I have had Canyon H 31 Cockpit and when I wanted to set up cockpit up or down I could not tighten the cap screw. The screw started cracking and plastic liner has been broken. The wedge expander been pulled up. That means that I wanted to tighten the cap screw for 2 Nm and the wedge expander is pulled up through cap screw. Thank you very much I appreciate your help. Kind regards. Libor Nemcok
Yes , grip paste will help the expander plug grip inside the steerer
@@stevenleffanue Thank you Oz, do you think that would be possible after application of carbon gripper to tighten the wedge expander more? There is limit 4 Nm may I use for example 4,5 Nm? I do not want to wedge expander pull up by cap screw. Thanks.
Clean the surfaces of the compression plug and inside fork steerer with isopropyl alcohol before applying paste...it will grip.
@@stevenleffanue Thank you very much. 👍👍👍 Kind regards Libor
How can you be sure about compatibility with the frame? I have the velobuild 168 and am interested in the yoeleo bars.
Fork steerer should be 1'1/8" and frame headtube needs to have a large enough diameter to allow cables thru it.
As aways, great Video, and now you have 2 new Yoleos? Thats really nice! Yoeleo its a awasome brand, and im sure your videos are really good for then.
Waiting for the next one, tks mate!
@14:00 *YIKES!* If you ask me that one is only good for the dustbin.
ah ya the cheapo stuff is stright dustbin material yoeleo and some other brands make very decent stuff
Hi mate i have a problem trying to figure out my internal stem cables. Road bike rim pull internal cables . I have no problem feeding them through the bars and stem. The thing i cant grasp is ,I have 3 internal plastic inner cable sleeves that i must put my front & rear & brake cable ( rim brake ). there is no cable stop for the outer cables from the stem . what cant i see or what do i fix it with. many thanks Crooky south wales UK
The outers go all the way to the gears or calipers
Hi Sir...Just need your opinion whether fully hidden cable can be made or done on Trek Domane SL5? I noticed in the earlier part of the video shown that bike. Would you advised me on how to fit a fully hidden cable on Domane. Thanks for your time mate!
You can if the top of the headtube is 1 1/2" . However you cannot put brake cable thru the fork without a hole drilled in the steerer.
Is it the current-gen Domane SL? It's impossible.
Thanks for sharing I love your video. I’ve been looking for one now.
Great content, thank you! Would this setup work on my Specialized Tarmac Pro Sl6 with Di2? Very keen to neaten up the front!
*Looked at a lot of options for getting my **Latest.Bike** . Great find in SAVA. Super light, nice components, really good value as it comes with many options only found in much higher priced bikes.*
Nice video! Hopefully the internal routing video is out by the time I get my R12 frame and start building.
Very bad experience for me with Yoeleo. I ordered the R11. After 3 and a half months, they tell me that my frame is finally in paint and 10 days later, Yoeleo tells me that they no longer have... the frame in stock in my size.
Great video, thanks. Do you know what the flare is on these bars? They are sized from the width at the drops, but can't tell me what the width is along the top of the bar. I currently ride Easton EC90s that are 38 c to c at the tops and 40 c to c at the drops, so want to make sure that ordering a 40cm width will give me around 38cm at the tops.
My Yoeleo integrated bar is 42cm c-c on drops , 39 c-c at hoods Miles. Id say if you order 40cm they should be 37cm on the hoods.
@@stevenleffanue great thanks. It sounds like you recommend Yoeleo frames and handlebars, having no concerns about quality? Are you independent and just like the brand or are you endorsed by them in any way?
Independant,not endorsed by anyone. I actually gave a negative review on their previous integrated bars.
great video. one question is it need a barel adjuster for the front deraileur
Front mech has its own trim screw
@@stevenleffanue thank you sir i love the videos
love youvideos....do you recommend using integrated bars with rim break bikes?
No. The calipers are in wrong positions for it.
2 questions:
1. Do you know of any -17 options?
2. Is a spacer always needed under the stem?
What is -17 option?
You can have no spacer under the stem.
is there such thing as a SL6 stem compression ring with gaps for internal cabling?
The compression ring is for the steerer tube, not the stem. Are you talking about a headset cover?
nice - impressive how flexible they are. I can't say I like it....
Super informative series of videos re internal cable routing. Thanks! I’m really struggling to find headset for internal cable routing as in your video. Can you help with the link where can I buy it? Thanks!
Google images....there are quite a few you can purchase
Hi Oz, I have a pair of the metron 5D ACR that I am just now realizing that the headset top that merge with the spacers is too wide for my headtube diameter, do you think that if I just run them all the way slammed, that it would be safe and reduce that kind of terrible round headset to intergrated bar stem look which is just visually wrong. Thanks!!!!
The height of the stem should accommodate your riding position. If you slam the stem it may be too low and cause inefficient riding style. Your bike fit is more important than aesthetics.
@@stevenleffanue Oh yeah it's all no problem to me as I already run it quite low regardless, do you think running it with no integrated top cap would be okay ?
Yes that should be fine once you have set your bearing compression and tightened the stem to the steerer , no top cap necessary, although if it rains water will enter your steerer tube.
@@stevenleffanue Ah sorry my terminology is a bit rusty, I'm reffering to no no dust seal or bowl cover!
Always a good tip to use a ceramic tile blade (or carbon fibre blade but $$$) for steerer cutting, clean finish and reduces fraying (Y)
How can I look up frame / headset compatibility? I have a 2021 Bianchi Oltre XR3… mech Ultegra.
Best to go to the Bianchi website and see what they say - top and bottom headset and fork steerer size need to match
You shouldn’t grease the bolts because it reduces friction. Therefore you need a higher force than the recommended Nm to get them safely secured. And to much force may damage the threat and the material.
To obtain correct torque threads need to be lubricated
You can actually get closer to "true" torque with greased threads:
www.reliabilitysolutions.net/single-post/2015/09/21/Why-do-we-Lubricate-Threaded-Fasteners
When torquing down a fastener, a lot of the work is actually done to overcome friction between the threads of the bolt and the nut. But that also means that you can overload a bolt (or undertorque) if, say, some of the threads are not cut correctly or there was a dent on one fastener.
Greasing the threads gets you more consistent torques, more of the time.
Having said that, you should do whatever is specified by the manufacturer, not just whatever is "common practice." Manufacturers specify how things should be torqued down - be they with grease, dry, with threadlocker, or otherwise. If the factory says do them up dry, do so.
Have you got a review video or even just some impressions of the yoleo integrated handlebar?
No but will do soon in a "Yoeleo R12 bike review" Vedran.
Ok thanks. Considering ordering the yoleo handlebars…would you have any hesitations recommending them?
They are fine. If you are internal cable routing work with patience.
does that Yoeleo bar come with all the caps/spacers etc for underneath?
No , they come with the frame
Noticed what looked like the new Trek Domane SLR at the beginning of the vlog. Any opinion or feedback from your friends on Trek's IsoSpeed?
Yes he likes it plus wider tyres on it however its a heavier bike
@@stevenleffanue Thanks from South Florida!
an you use integrated handle bars if you are using rim break?
Yes but not for front brake cable
May i ask which headset bearing is for the top and bottom? I got mixed up the taller one top?
7mm for both but if you have smaller it goes on top race
Built up a an araya wheelset with araya rc 540 rims, DT swiss 2.0 1.8
2.0 Double butted, laced to Ultegra 6500 hubs 14 gauge spoke nipples.
Big problem, the rim has lateral distortion to the side of each of the
eyelets - the distortion isn't at the eyelets it's at the braking
surface as if it is jittery when braking - I have close to perfect equal
tension throughout. Rebuilt it again with using oil on threads and
eyelet holes still same result. Gotta be over tensioned spokes causing
the distortion right? I've got an average of 160 Kilograms of force on
the spokes, should I reduce the tension to 117 kgf? There is no
cracking of the rim, and when I de-laced it the destortion went away but
when I retensioned it again it got distorted again. Could I have
permanently distorted the rim? Can you give advice on this?
Yes,sounds like you have over tensioned it. Once alloy has been changed to a different shape it springs back a certain degree but will not be as it first was. Im assuming you want a stiff wheel? Use 36hole,straight 14 guage spokes.
@@stevenleffanue I've trued wheels that were out of true by 5 mm and never permanently distorted rims, how can a slight 0.05 mm distortion from over tensioning cause it to not be as it first was?
Your description Brian sounds like the distortion is at every eyelet?
@@stevenleffanueYes, it's like the slightest little ripple on the braking serface area adjacent to each eyelet - 32 eyelets so 32 ripples 16 on each side, It's so minimal you can't true it out and when you ride the wheel it has a slight jitter when braking as a result. Had this problem on a different Araya wheel - araya VX 400 and was able to detension and rebuilt again to 173 kilograms of force and that fixed it , but with these Araya RC 540 rims it didn't work. Contacted Kerin Track store in Osaka Japan tonight waiting to see what they have to say.
What type of riding are these wheels for?
This is a very nice headset kit for internal routing. Where can I buy this headset kit?
Yoeleo
@@stevenleffanue does Yoeleo sell just the headset kit? Or sell the handlebar and stem with the headset kit?
Hello sir...I am waiting for my new emonda sl6 arrive. Do you think yoeleo handlebar can make cable routing in new emonda look hidden? Is it compatible?
To run cables into a headset the top part needs to be 1"1/2. ..the Emonda is only 1"1/8
Once you've ridden the R12, can you go downhill over 55kph? I have an R12, and suffer severe speed wobbles, I'm curious if this has anything to do with the overall stifness of the front end and fork, or if this is a wheel issue
Will be doing
Hey mate love the videos, its interesting that you spoke about clip on try bars, ive been trying to find something suitable for this style of handle bar but haven't had much luck, do you have any suggestions?
Yeah, stick with separate stem and bars....
شكرا لك علي هذا المعلومات الرائعة حقا انا اتعلم منك كل يوم شيئ جديد 💪👍
Apik lurrr 👍👍👍👍🇮🇩🇮🇩
I don't mind the hidden look but i prefer the adjustable tilt of a two piece.
@7:45 there is visible crack in the stem (inside the steerer tube hole).
Wasn't a crack but a void. Not the best but doesn't affect clamping or strength hardly. I'm still riding with the same bars at 6,000km , they're fine
Just sent mine off to the builder, had some trouble with the headset bearing , the hole on the frame is a bit too small , and the internal cable routing according to my builder is troublesome to say the least
Also had to wait a rather long time for the frame and when I got it, I realised they need me to wait for an extra few days for the handlebar, all in all not the best of experience, hopefully the riding quality will be better
Can it fit 1 1/4 canyon ultimate fork?
Integrated bars are annoying to change cables. And they tend to bend pretty tightly. I would probably go back to a normal seperate alloy bar and stem combo once I crash lol
As long the plug sticks a bit lower than the bottom part of the stem which is the critical part
Wonderful Bike. Here in Brazil it is very expensive.
Great video 👍👍
is this compatible for rim brake frame?
Anyone know if this works on a 2018 aeroad?
Just came up on your channel... Nice
New from your channel but do you have a video about bike fitting? It would really help , love from the philippines
I havnt done one Ryan because there are so many already.
Ohh I see
You have such nice bikes. Aside from di2 gears are there also wireless brakes? Hope you can feature them.
No wireless brakes,no.
How do we call this kind of Man 🤔????....A PRO !!!!!
Double take? I am seeing a second R12 hanging.
Yes Emrah, that one has a downtube opening for Di2 junction box
That tunnel at the end under expressway has a strange optical illusion that looks like someone has strung a wire across it. Scared the crap out of me one ride
Owwww,thad be nasty!
when are we gettin an update on the new bike?
This week
@@stevenleffanue Cool! Really looking foward to it because I'm really looking at the r12 or building up a winspace 1500 (with their wheel too which hambini tested to be really quick, dunno if that disc or rim), which are gonna be about the same price when you equip it out (usd). Thanks again!
15:33 That middle bollard is utter lunacy.
Theyre everywhere on our bikeways. One of our guys hit one recently...he's ok. The bollards are to stop people driving vehicles on bikeways.
We have them everywhere here (Poland).
If you know the bike way, you’re fine. But whenever someone is following me I feel urged to remind them of the ballard...
Oh, there is another r12 hanging on the stand? Rear axle problem got a replacement?
@@stevenleffanue The local authorities should fix those dangerous situations! In the Netherlands you can even mandate it through the national cycling covenant...
it`s compatible of caad13 rim brake frameset?
Steerer needs to be 1 1/8"
@@stevenleffanue what? I want my caad13 to be integrated the rear brake and di2 wire
@@stevenleffanue
All-New, BallisTec Carbon, direct mount rim brake, SAVE, 1-1/8" to 1-1/4" steerer, integrated crown race, 100x9mm QR, 55mm offset (47-54cm) 45mm offset (56-62cm)
Should fit ok then. You will also need the top headset pieces to pass cabling thru the headtube. All cables will need to exit the frame at various points. Front brake cable may need to exit at centre of handlebar.
@@stevenleffanue where can I buy it?
Great content
👏👏👏
Nice!!!👍👍👍👍👍👍
As aways, great Video
Open cut will collect water over time. Good call.
Why anyone wears black clothing in the heat is beyond me. If its cold sure.
Another cool vid. Ty.
ottimo video
just another justification for added cost and more profit for manufacturers, most ordinary riders don't need it anyway
Sadly, those that started riding in the 2020s will lust over it because that's what they usually see on bikes these days.
Any other configuration, they call it external routing, even for bikes like the TCR Advanced, just because they can see brake and shift lines outside. (I hate the way they call it)
I say they're naively wrong about this. If they want to talk about external routing, they should look at 20th-century road bikes. Bikes like the TCR Advanced still run internal routing as the shift and brake lines still enter the frame and fork at some point.
Hi there can I have your email pls. I have ordered yoeleo frame. I plan to purchsse shimano ultegra Di2 R8070 group set. But I confused with this part (shimano EW-SD50)...there so many choice in length...which one is matching with Yoeleo R12 frame? Thank you
Sorry Im using mechanical gearing Jok. Always get longer wire than you measure for.
oz cycle ok, tks. I think I’m going to use mechanical as well . So if I can get Shimano Ultegra R8000 plus BB 386 with 24mm crank diameter, will fit on the R12 correct?
is anybody gonna ask about the rice cooker?
Looks nice but I'm such a lazy ass to be bothered with those integrated stuff.
It is bicycle mechanics nightmare
Too conservative on steerer plug because you don't understand loading mechanisms, as most don't. How many pros have a spacer above their bars? Absolutely zero. Adding spacers above is also a good way to ruin the clean look you were trying to achieve by getting integrated bars.
Harley is always saying to have the longer plug.
8:24 in your other video you claim that compression plugs are unnecessary? You need to make up your mind (or just take that other nonsensical video offline as it's potentially dangerous to noobs).
A compression plug is required unless manufacturer states otherwise ie Canyon Aeroad. Its the top cap which is not require once stem has been tightened
@@stevenleffanue "A compression plug is required unless manufacturer states otherwise"
Well then why did you not state it clearly in that other, highly misleading video?
Its going to be a beatiful bike , anyone with a spare carbon frame 🙁
I would prefer full visible cable route🤷🏻♂️
The worst thing I see on integrated cockpit cable routing is people using cheap/generic cables. Spend the extra money and get really quality cables, like Shimano's Dura-Ace polymer cables. Not only will will it feel a lot better from less friction with all those tight bends, it'll last a lot longer before having to redo the very time arduous (and expensive if you pay a shop) process of re-cabling the bike.
@Wooly Chewbakker Unfortunately not always an option for everyone. I've seen plenty of Dura-Ace and Ultegra with whatever bulk generic cable their shop has. Really makes you wonder...
Couldn’t pay me enough to use carbon bars, let alone these integrated stem/bar types. Total lunacy!
They are just making it harder and harder to work on! I do 99% of my own bike work. I’m looking to buy a new road bike it’s all disk I like rim brakes easier to work on no messy oil. 🚴
Once set you shouldnt need to replace mineral oil for about 5 yers minimum
Nothing useful!!!
Thanks for the video! Any experience with tne Deda Alanera bars? I sent you a message on instagram. If you get a chance, I’d love your feedback. Thanks again!