UNBELIEVABLE DISCOVERY INSIDE ABANDONED S15 ENGINE!
HTML-код
- Опубликовано: 7 сен 2024
- I disassemble the abandoned S15 Silvia’s SR20 engine & make an unbelieveable discovery!
MERCH ► sammit.net
FOLLOW ME EVERYWHERE HERE ► linktr.ee/samm...
Why I drink Gamer Supps ► • Why Gamer Supps?
#Subscribe
#SAMMIT
As an engineer and engine builder in the past, that piston damage is negligible, it does nothing to the integrity of the pistons. Might create a hot spot but highly unlikely. If the ring lands are good and rings free to move it’s going to work just fine. Most likely just damaged in idle. Have opened Cosworth YB engines with much bigger valve contact marks and they were running fine and big boost.
yes
True but its still better to be safe then sorry. Why slack off when u can do it right the first time n never have to open it back up
that's why you need to read comment and don't trust what every RUclipsr says... he's a content creator not a professional doing that kind of job everyday. RUclipsr must stop thinking they know everything and start making some research before talking.
@@the.ghost.behind.u Err well yes you need to open it up after every season for service. Checking clearances, bearings, oil pump, rings, seals and so on. Building a race engine means you have race engine service interval. Same goes to all racing equipment, turbos, transmissions, safety gear.
Yes, I agree, as long as it is dressed, it would be fine. But at this level of a build I would change them. They would be fine in a daily driver low horsepower build. I would be more worried about the wear on the piston skirt. I would definitely double check bore size and piston size.
Love the excitement you see in this man's eyes when he gets to pick apart a car and discover its history
It reminds me of Steve the crocodile Hunter.. looky here mate, what we got here is a wild SR build lol
@@ls_812 rip to the legend
7:33 ぺこってするさとみくんがかわいすぎる、
youtubemn.com/watch?v=mPnUUlz75VZ
じゅうじつをじゅうじちって言ってるさとみくんが可愛すぎます(´ω｀*)
Id be interested in the tomei rods if they are still good.. love your content..
Rem is finally getting the love she deserves. Heck I love it in general to see a whole engine tear down.
Who is rem?
@@zafirulqushay7833 its the s15 he's working on
@@zafirulqushay7833 the Twin Sister from Ram - who are the 2? Charakters of the Series Re: Zero
I would love to see more of these unedited engine builds. Theyre so relaxing but also informative to watch. Keep up the great work
1マスからここまで発展するのはとても面白いですね！
youtubemn.com/watch?v=tevueh8R8xf
14:00 こんな状況でも簡易的なトラップ作っちゃうさとみくん
When May giggled and said "so no way turned into this is wild" I literally had just said the exact same words.😅
same here :D
This was so much fun! Thanks again for letting me hang with you Sam! Can’t wait to go back down and visit
投稿ありがとうございます^ ̳ᴗ ·̫ ᴗ ̳^
youtubemn.com/watch?v=1Ax1QoQZcbd
なんか動物に好かれるさとみくんな感じでほのぼのする(◜ᴗ◝ )
You just can’t beat the “old school” Sammit where he gets his hands dirty stripping down a legend of an engine.
Sams knowledge and skills are second to none and he is a pleasure to watch.
This is the content we all love and I, like every other subscriber to Sams channel, will be waiting excitedly for the next episode in this exciting journey. Best wishes Sam and Mae 👍🏼
@11:10 Looking at what appears to be mild-ish damage to the top of Forged pistons what probably happened was they told the customer it has damage that appears mild-ish but not cracked or broken. So your options are we can either spend thousands and do a complete rebuild or we can replace the head, smooth out the piston damage and do a compression and leakdown test. If that tests and looks ok you dodged a bullet. I have ran forged pistons with way more damage than this without issues to get by until I could afford a complete rebuild. As long as they didn't crack or crush the ring gap/seize the rings forged pistons can take a hell of a beating and survive.
It'd be cool if you did the reverse paint of the pink s15, blue with pink livery.
damn that would be badass.
That would be awesome
May: It’s an engine period
Sammit: brief pause… Yes May
😂
😂
😂
I think this car should become a better versed what it once was, I say keep the blue and put the original kit on it. But build the rest
I think the same! Maybe change the green engine bay and the cage to pink, so it will fit to Sammit 💯🔥👍🏻
And the yashio factory widebody
@@halfameatballz i prefer the rocket Bunny, to finish the history that it started
And paint the engine bay blue
Absolutely love the rebuild content. I'm glad that the sleeves are good on this engine and that the damaged pistons didn't scratch the bore. Can't wait to see it all getting put back together. Keep up the great work.
glad that the engine is in your hands now! Fix it, build it, shred it! 🔥🔥🔥
I really don't know how I would react if I saw something like this after giving my car to a workshop where they should know what they do. All the history about the abandoned s15 blows my mind.
Sammit Detective, Sammit Detective, whatever the mystery it will soon be history!
Finding all of those issues, full strip clean and rebuild with new HKS goodies
28:25 that feeling. Its too good.
Ah, that was so exciting to see the teardown and double shooting, I am so glad you manages to find most if not all the answers toy needed for that engine
Dorm built 2.1 Tomei stroked, ran dry for first start.... pissed myself laughing then cried a little
Nice to see you supporting the smaller Australian RUclipsrs with the Keep It Reet merch! #keepitReet
love videos like this and i hope videos like this inspire people to stop trusting a random engine, dropping it in and sending it only for it to fuck up sooner than later. It's always worth going thru it so when it's running you know exactly what's going on with the engine
15:09 "its engine PERIOD" -May 😆😆😆
Lets get SAMMIT to 1 Million subs by Christmas Day, Lets Go.
Hands down my favorite series so far,keep slaying it.
Definitely in need of some love... I know you'll make this poor neglected S15 a gem again 💎👌👍
Sam sometimes pistons can be repaired and reused. I couldn't see any cracks but on video you can't see much. Ask the old boy if they can be used again
it could be used in a grocery getter or something but those pistons are not trustworthy for a performance application.
Depending upon cracking. If they have no cracks then they can be reshaped and they will be fine. I would get them checked properly and see for the price of forged pistons it could be well worth the effort
If they were cast I would agree with you
It would be sick to go 2.2 or 2.4 seeing how the pistons could have miss shaped the cylinders. And since the pink car is a 2.1 would be interesting to have a different kind of build. Especially if u had a vvl head/correct piston combo, and the gen 2 garett you were talking about could be a ripper. Should have all the torque in the world, would love to see a 2.4 all dressed in yashio factory bits.
I literally started crying seeing the Pistons - who wants to know should Watch that
I love how Sam can say something is “a bit how ya goin” but then says he’s gonna get his car “tooned” for big power 😂
Take the rods to Tomei around the corner and get them to check the specs always good to double check they can do the crank at the same time then just some pistons from Tomei or HKS and ready to go.
You get so excited about a few marks on the pistons. Nothing wrong with them. Take the sharp peaks off the indentations to stop any hot spots and all is good. Its a shame that some people will believe your lack if knowledge and throw away good pistons and waste money.
i love this series of the blue abandoned s15
15:09 It's an engine period! 💕. That's WILD!!!!!
This was a super fascinating video. I don't know much about the mechanics of cars but I'd like to learn and I found this very educational! Would love to see more like this
@First Name Last Name Same!
Me and my brother love your vids s15’s are my brothers dream cars keep the good content going hope to meet u one day❤
Hell yeah sammit on sunday lets go !!
been waiting for more of this dream car build
love engine disassembly and can't wait to see you build a new one for it!
Whoever built that motor didn’t know what they were doing or wasn’t paying attention. But a full rebuilt is def a answer
The previous engine builder definitely had some sake's whilst putting together this engine lol
Love the content and can’t wait for the rebuild of the engine to happen🎉🎉🎉 and I would just clean the block and change the internal and that it maybe do the head along the way
I had a piston in my stroker worse than that and it ran for seveal years made 480hp and 460tq at the wheels and had over 80k miles. It never lost compression, burnt oil, or gave me any tuning issues. If this was my engine I wouldn't be afraid to run those pistions again if it was a customer I would have second thoughts, as long as the cylinder walls or ring lands didn't take and damage I would run them.
At 10 minutes and I expected Okachan to walk in say a bunch of stuff in Japanese super seriously......and dip!
This car went through a horrible journey but it finally landed in the right hands. I'm so excited about this build! 😁
Learned something new about SRs. I've only rebuilt a 70s 350 so I have limited knowledge of these
Folks have been saying one was installed backwards for awhile. It’s crazy that it ran in that configuration to behind with. Hype to see it get rebuilt.
Love to see this build go back to its former look. Or keep the blue and do your livery on it
Dude this series is awesome
I can't wait to see this thing finished properly, I still think it should have a rocket bunny kit put back on it but I understand why you won't.
🎉🎉🎉 I am glad you got to the engine in the car and by the way congratulations your new shop was amazing from the outside and I had outside and I hade opportunity to see it on this episode and see you guys more together working on what you guys love to do in your room people who love you and make it happen congrats
Amazing well shot and edited video. Too bad the engine was not properly built by any stretch of the imagination, but it is in good hands now! 🙌
It kind of turned out the way most people thought it would. Because so many people worked on it and did repairs, not really sure who did what to it. The oil squirter would interfere immediately when it was cranked over, so they disregarded a bunch of steps. I think it was a good idea to rebuild, and it might turn out pretty good after 200,000 yen worth of parts and labor.
I think you are now my most favourite Drifting RUclips creator👍👍👍🔥🔥🔥
The rods and Pistons could have been weight balanced, So the Piston is in the right spot but it was matched with a piston from a different cylinder in order to make a balanced rotating assembly. I'm saying this for a numbered con. rod point of view.
Chillax... Those pistons are still good... You overreact worse than my wife with stuffs 😂
Hey mate, love to have content. I was thinking you should maybe do a giveaway with your broken pistons with a signature and what cylinder come out of, keep it up mate🇦🇺
I love how Sam is now our Oka-chan, teaching us about SR's and engine builds 🙌
Just got an email that the Dream Shop Pack should be here by Thursday🙌🏻 hyped af!
lmfao nothing wrong with those pistons, as long as they arnt holy your good!! i have seen worse last a long time, under boost pushing big power too lol
Cant wait for all the new merch that will be coming REPPING SAMMIT HERE IN NEW ZEALAND ALL DAY LETS GET IT
It is good that you pulled that engine apart
Watch the car from Sam picking it up for a steal, stripping it down to the Chase, and then building it to the speck he wants is going to be fun to watch. I wonder what other mysteries will be discovered as the rest of the car gets taken apart. I for one would not trust anything else that was put together at this shop and would go through every nut, bolt, wire, just for peace of mind. May as well do it now while it's all torn apart and you have all that space to lay it all out and have a good look at everything. It'll take longer for the build but would be so worth it when it's built to how SAMMIT would do it and he know for sure and certain there are no other mysteries left behind from the other shop.
That's why I try and do whatever ever work I can from home I got screwed over by a shop when I first got out of highschool
Please go into detail with reassembly of the sr20det.
the inteded setup was stroker + good flowing head, which means the turbo setup probably was a good match had the head not been screwed
Sick vid loved it can’t wait for more content
Awesome video as always. Keep up the great work.
Stance drift build thats responsive an works 💯🔥🔥🔥🔥
restore the engine, put a Gulf GT kit on it and make it a pink time attack car... need some more time attack videos with Okochan :)
If those dent in the pistons would be on some low power daily, i wouldn't be worried about them. I have put many cars back together with pistons with valve marks after timing belt failure and they have had zero problems. Ofc it is a different thing in these high power turbo engines. They might hold surprisingly well, but might as well put new pistons because a wallet doesn't like if the engine grenades because of this
😀
15:08 May has zero chill hahahaha
LOLOLOLOL, we had a small piece of metal dislodge and bang around inside the cylinder damaging the top of the piston. It looked like a BB gun shot it 50 times. And that thing still drove beautifully for thousands of miles with no issues. Looking at this I see no problem lmao.
16:23 Damn ... Detective Conan is on it LMAO
Absolute beast!!!!❤❤
The valve broke probably because the timing jumped. It's the only way all the pistons get those nicks in them.
i was definitely thinking more along the lines of requiem for a dream music when you pulled the head off.
Are my Albo car girl senses tingling? Did Mae just correctly identify a gasket before Sam noticed it was stuck? If you said no, go back and rewatch this video. If you said yes then your a Sam Chad. Head on over to his instagram and give him a follow!!! ❤😂
Love the car keep up Sammir your doing a great job
Love your videos :D
Such great inspiration!
Thanks for always making awesome content :)
Its an "Engine Period" haha good stuff guys!
them pistons are perfect
Hi sam love the vids and can't wait to see what option you choose for the Silvia
hey sam💯 mate just wanted to say iv been loving the knew changes your making with the content, i feel like its really helping you gain more traction, but i just wanna say im not to much of a fan about showing everything thats gonna go down in the video/showing us what is gonna happen only because its like it ruins the excitement i feel when i see that you have posted ,but then because of it i also don't really want to skip parts of your content because i love watching it, and i wanna take up every bit of it 💯👍👍
Yoooo more bistro content..the asmr vibes there sounded good..
I can't believe someone would just put a head on and leave the pistons..... Mindblowing... Wow
Konbonwa Sam. Music May, sugoi. What a mess and so lucky Sam. Such a dodgy piece of work. Great commentry and you were spot on , May. 👏 Jamata ✌️🇦🇺🇯🇵
thing i like the most is a merch hes rocking)
Loving the content wish okachan had the time to tear it down with you his reaction would of been priceless 😂😂😂 I hope your bore's are ok 👍
Can't wait to see this completed 🙌
Sam is my favorite car tuber for sure he's not doing it for clout payed his do's at shops and is genuinely in it for the love of the sport and culture.
you are the bader built of japan my man!!!! love the content
The Pistons are now ashtrays if you're into that recycling type artsy fartsy stuff. Cuz they are now buttsworthy!
rebuild goin to be 🔥
lmao mae, engine period - that got me i wasnt expecting it
I would clean it up check it out and rebuild it. Properly go for it sam
Nice, love the videos, engine videos are always the favourite
Wow I can't believe you called that backwards piston in the start
Can't imagine the previous owner looking at this and realising how much they screwed him over
It just blows my mind how bad things could've gone but didn't. Whoever worked on this engine was very careless. But thats enough ranting, I'm honestly very excited to see what comes next and maybe even see some more misteries solved along the way? Cheers
Hi Sam. That's craaaazzy stuff and that piston, who would do such a thing. Oh well it's gonna be super spicy when it's don😎💪💪
Beautiful car
Can you imagine being a shop full of guys who love cars especially jdm ones and their boss said just slap the motor together as quickly as possible and call it a day. And they do and go home and are able to sleep knowing they did that. Like if a doctor did that how could he sleep knowing he slapped his patient together and sewed him back up sent him off.
Gawwwdd been waiting too see inside that engine for so long haha!