Maytag Washer Error F6 E2 Fix
HTML-код
- Опубликовано: 8 сен 2024
- In this video I describe how to potentially fix a Maytag F6 E2 error which indicates a communication failure between the control board and front panel.
Maytag does not cover this issue under their "Limited" 10 year warranty. After calling around to find parts the lowest cost I found was about $300 for a new control board. That's when I decided to tear the machine down and take a look. Glad I did. $0 fix
Thanks Kevin! Our panel was flickering and now the numbers are more solid! Will try it later!
Holy Crap!! You're the only one who suggested this fix on RUclips and it worked for my washer!! I'll be canceling the repair man appointment and getting more Christmas gifts for my family with the money I just saved...400 plus bucks!! Thanks!!
TY so much. Mine just died today, no power at all. I took it all apart like you did, cleaned the back of the solder points etc with alcohol and q tip and BOOM it's working agian. Saved me a few hundred bucks! Thanx
Great video, removed board, cleaned it up and again working. Thanks!
Thank you very much! 30 minute fix. Hardest part is getting the clips loose.
Omg!! Thanks bunches!! I cleaned the corrosion and it WORKED!! You saved my washer AND my pocketbook!😊 I'm happily washing now!!
Great video....helpful! I had rusty contact points as you illustrated in the 1min15sec mark of your video. Well done....thanks for your clarity and brevity.
You’re a life saver thank you!!!
Thank you very much for the video you saved me and my family a lot of money and grief with this simple fix!
This totally fixed our F6 E2 code problem. Thanks for the video 🍻👍🏽
Kevin, you beautiful Angel. You saved the day and possibly my marriage 🤣 Or the life of some unlucky SOB at Maytag. Seriously- Thanks for taking the time to post this! It worked 👏🏻
Thank you so much! After cleaning the pads and putting everything together again, I heard that beautiful sound! Excellent video!
Thank you 🙏 it worked you save my ass been dirty for couple weeks before I fixed it
Thank you very much, my washing machine won't turn on the board, but the green light is flashing. Apart from cleaning with alcohol, clean the edges of the wires with a cutter, this was only where the wires ended at the connection😉
Thank you! This actually worked!
Glad it helped!
Thank you for posting your video. It helped me diagnose and fix this same exact issue!
Thank you for the Tip! Cost saving tip!! It works
Thank you! This was the case with mine as well.
How do you get the codes?
After cleaning your control panel and having it work again. Is it still working or did it give you the error code again?
I like to know as well.
@@Askmediy I cleaned mine and it worked well again. No issues
@@acostabuay Really! I just cleaned mine with no luck. Damn, this machine is only 15 months old.
@@Askmediy make sure you all the connectors in tightly and go over everything with a Qtip and alchohol. No rust in between any connections on the board
@@Askmediy and make sure you do a reset on the washer
Similar video by Josh Cobb that may possibly save you a little more time and a lot of money. Recommend watching that one also.
Maytag front load washing machine
My washing machine please help
I do not have that washing machine. I only have the one in the video. If you'd like to ship your front load washing machine to me I will try to diagnose it for you...