Day 1 update! You can buy the whole kit in black from CNC drones for $124. If you want to buy coloured prints from brain3d youll want to buy just the CF and hardware from cncdrones. The pricing is not correct for that at the moment (should be $64) but will be fixed soon!
Would it not be possible to buy the CF and hardware parts from cncdrones and get access to the 3d print files? It would be great to be able to experiment with different colours and filaments.
I asked this further below, but could you include anti-vibration grease and locktite for the build guide video, so we know exactly how to do this accurately (and optimally)?
Dude you motivated me to push the limits. I am feeling the need for speed now. Gunna build an 8S version, just ordered a red one from Brain and the parts from CNC. Keep pushing Chris, you da MAN!
I'm definitely excited about releasing a fast forward kit as well... you really need a one axis camera gimbal to see where you're landing. I'm curious to see if you will refine this beyond just a sprinter.
Hi Chris, we can't find the APC 5.25 x 6.25 props in both pusher and puller configuration, so wondering what you used, (8pitch are but as you said ' very extreme')
Exciting times, I cannot fly well at all but been wanting a speedy drone like this for my collection. My favourite drone of all time is AOS 5.5. I did not like the AOS 5UL so much but maybe I didn’t build it so well. Keen on the 7inch frame as well.
Please please please make step/stl files available for the rocket! (Specifically step) To be able to mod and fit a modified gopro in this would go nuts!
Amazing work Chriss!, I have a few questions: On your video the motors are EMAX 2808 pro 1900kv(?), Do you recommend the velox like "hinted" in the picture? :) The current recommended prop is HQProp 5.3x8 thin prop. In the past (way back 2014.... LOL) i tried thin props and under high speed they bent from the load, making a new scream sound Isn't this an issue? (planning the 8S route, maybe with throttle limit at first) Should I put on the build an XT90 or stronger ? we can reach 220A draw (i'm amazed how XT60 lasts ) Lets say I do the whole battery in one pass with the XT60, will it hold? We once had a drag race on 4S and the winner (i was 2nd LOL) had his XT60 from quad fused to his battery. Will AM32 be okay for this build? You mentioned something about rampup time that BLheli32 accelerate faster, but I really dont want to buy deadend ESCs... (horrible what these guys did to the hobby, but it will be better after a period)
Wow, a high-speed drone kit for the masses?! Super neat. Bet that thing takes a little while to master vs a normal drone, mostly because of the camera angle. Gonna be landing somewhat “blind”.
Not necessarily, I have a similar quad for years now with a 90° tilt camera (I don't understand why using less except if it is for subject filming), and to fly it easily you just have to swap roll and yaw channels, you fly it then like a plane, and for landing I just use a switch to put back channels in the normal configuration and activate stabilised mode for los landing or rth for auto-land.
@@MessFPV So, in summary, you *will* be landing "blind" in FPV, so don't try it. Land LOS or with RTH... Still not great. It still means that it's important to have that warning for people that they won't be able to land "normally" (i.e. in acro mode with FPV).
I'm not sure what the regulations are in your country, In the USA think it's needed for commercial flying that you get a part 107 waiver for high speed operations.
This would be awesome when available via iflight or european dealers. My 5 inch racer does 270kph maximum speed. Cant get it to fly straight without oscillations on top speeds. Going faster is all about aerodynamics. The apc 5x7.5 are also a great choice. Any tuning tips ?
Do you think the texture of the 3D print will have any effect at the speeds it can fly? Would making the surface smooth help or maybe the texture helps like dimples on a golf ball 🤷
WOW! Awesome! I saw that fastest drone design few years ago. He is in the Guiness Book for having that fastest drone to fly. Great video! I just got to the part where you said you got inspired by Red Bull video. They were not the first one to do this design.
Great job, congratulations, I respect you and I consider you really good. I ask you, have you ever tried to laminate the carbon of the frame in such a way that the direction of the fiber is never directed from the motors to the fc?
@@markwilliams5654 Pretty sure the US has a 100 MPH speed limit for all drones... But other than that you're probably right - AFAIK most countries base their limits on weight and don't care about max speed.
I'm working with those guys a lot, what they're doing is a little different. This isn't a world record drone, it's a fast camera drone. But absolutely mad respect to those guys. They are really incredible!
@@ChrisRosser A "fast camera drone" that can't take an HD Camera, so you're forced to rely on your FPV camera being good enough...? Which means DJI O3 is about the only option that might be good enough for professional use, and it generally has the worst latency, which is not really what you want when flying at 200 MPH...
Not at these speeds unfortunately, backward sweep really helps when you get into the transonic regime above 0.6M or so. At lower speeds backward sweep increases wing surface area and therefore drag.
My first drone build will be a 3.5 or 4 inch. Any version 5 kits inbound (incl. motors) for such a build? Did you ever produce a build guide with the anti-vibration using viscous grease? That would be very helpful to difference where to use locktite and where to use grease :)
I think there's been various tests about the grease and it doesn't always work. Better is to just have a low-vibration frame, which most frames on the market already are. I recently built a 5" quad and it's just the standard build and it has super low vibration.
the motors are 6S rated so why can you use it on 8S, because it is not the voltage but the power that matters? so I could use any motor e.g. at double the voltage and half the current? thanks
Will it be possible to upgrade the camera cage if you are using a previous version of the AOS 7 frame? Just wondering if that would be possible as the front looks slightly different now.
Yes, a new top plate, bottom plate and camera cage is required. If you have the EVO I wouldn't worry about upgrading unless you need one of the new features. Just enjoy your AOS!
AHHHH COME ON. I just finished designing my own high speed design, weird old frame and custom canopy, but burned out motors because of wrong tune, had no time to fly it with higher kv motors before my holiday because I missed putting a whole to bind the Air unit (!) and the breakdown is more complicated. i see that you do not put as much emphasis on putting the center of mass forward as Maximo Bell. Looking forward to see if you get thermal issues while waiting for satallites ;)
Never even seen your reply! As a seasoned KSP-Player I know about the importance of center of mass vs area. I don‘t know if the tails in all that dirty air will produce enough „correcting“ torque before the FC corrects, even with the sliders and filters being as docile as I had to make them to not burn up way to high kv motors. I am going to test that theory soon, my design flies with minor difficulties (RX loss after some promising passes) Did you ever try pusher vs. puller?
@@ChrisRosser Well, you were right. My design started "fishtailing" at about 270kph when I fitted aerodynamic shrouds to the arms. And without them I struggled and burned out a motor (yes, one?) at 260
Can one Tatu 6s 1800mAh battery power such a beast? In the RedBull drone, they were using 2 batteries if I remember correctly, so I'm not sure how long this can fly on the top speed until battery sags...
@@ChrisRosser Thank you Chris. The reason I asked about the 2812 motors is because I already have them build on my FR8 with 8" props, but I'm not a big fan of that frame. So that why I wanted to see if I can gut it and move the components over to the ASO7V5 frame.
Nick from CNC gave me early access on the AOS 7 V5, great flight! Is the X-cell technology gonna be moved into the cine25 or cine35? that's where the vibration reduction can benefit the most
Expect you camera and vtx to be smashed first time you hit anything and with the camera mount so high up it changes the way it handles, and thats way racers can fly so much better because of where the camera is mounted so its projection is centred to the centre of the quad making it so much better to fly but its way better than that green African quad with the camera so far forward i dont think i could even do a forward roll without looking like a beginner!.
Yes, absolutely. You can use any analog or digital camera and VTX. Just bear in mind the packaging and use a UFL or MMCX antenna similar in size to the O3 antenna and it'll work just fine.
It's pretty easy to land. What really helps is having someone stand next to you and call out the height above the ground. Or land in long grass so you can hear when the props start cutting the grass and know you're low enough to disarm.
Not sure why you'd wanna deal with analog anymore... Especially since it won't give you video you can really use. Better idea is the HDZero Race VTXs or maybe even the Walksnail Whoop VTX. Much better quality image, and still a very low weight for a sub 250g.
@@Vousie Yes , but for high speed the weight matters , for a 400mw anlog vtx and camera you will have 3g , for me the analog quality is usable, I also fly walksnail, but the vtx takes more space and just sags the battery more on whoops , if I'm trying to build something efficient I will go with analog , if I'm trying to build something where weight it's a problem, I will go with walksnail
@@rares6216 That's only fine if you're flying fast just for fun or something. But a lot of people want to film things. In which case you need at least something like Walksnail where you can actually kinda use the FPV feed.
@@rares6216 But that camera *alone* weighs more than the WS whoop VTX and camera... So if lightest weight is really your priority (while still getting usable video) then that'd actually be the best option. Note that that VTX has onboard storage, so you can record 1080p video without interference.
All drones are potentially dangerous and should be flown responsibly in compliance with local regulations. I think drones are less dangerous than cars (and much less numerous) and no-one is discussing banning driving.
Let me start by saying i love what you do for this hobby, however i dont believe a 200mph capable frame or kit should be widely available to the masses. This seems risky to have such a high speed quad easily accessible to folks with potentially not enough experience or sense to be safe
@@ChrisRosser I'll admit, you got me there. Someone was bound to do a high speed kit eventually. I guess it's cool that you did it proper and it'll fund more r&d for the rest of us to learn from. I appreciate what you do, this one caught me by surprise though. Good stuff Rosser. Keep doing you
I wanted to bring the performance of the red bull drone to every FPV pilot. The innovation is in making their concept into something that is easy to build and fly 👍
Why shouldn’t he? Plenty of people saw that video and wanted one and now there will be one that they can buy so what is the problem? I also doubt that red bull were the first to design a drone like that either.
NGL the aero on this looks pretty shit. Would be way better with just an ounce more thought in the design. But since you've closed source your .stl's, sucks for you since nobody will improve it.
Day 1 update! You can buy the whole kit in black from CNC drones for $124. If you want to buy coloured prints from brain3d youll want to buy just the CF and hardware from cncdrones. The pricing is not correct for that at the moment (should be $64) but will be fixed soon!
Would it not be possible to buy the CF and hardware parts from cncdrones and get access to the 3d print files? It would be great to be able to experiment with different colours and filaments.
I asked this further below, but could you include anti-vibration grease and locktite for the build guide video, so we know exactly how to do this accurately (and optimally)?
Thank you, Chris! I admire you and what you do for the hobby, and these adjustments make it much easier to support your work!
Dude you motivated me to push the limits. I am feeling the need for speed now. Gunna build an 8S version, just ordered a red one from Brain and the parts from CNC. Keep pushing Chris, you da MAN!
Great stuff Chris! Well done developing this and making it available to all.
Bought one! It's Orange and I'm going to cover it in LEDs. Can't wait to start the build.
Thanks for the work you do.
Appreciated.
I can’t believe the man himself made the drone I’ve always wanted. I need this speedy beast
wow, amazing design! but man, 90$ !!! I should start selling my designs as well instead of posting them for free. 🤑🤑🤑
We are always happy to offer more frames. Reach out and we can have them added.
Excellent! It's like Chris heard JB say he wouldn't review frames because "they're all the same"... Understood the assignment. And delivered.
What a cool unique use case for filming drones! This type of drone could really open up some possibilities for air-air filming. Great work sir 👏
WOW Chris you never cease to amaze me! Cheers bro!
My pleasure!! Thanks for the kind comment 😁
Super Cool 😎
I think I found my next project. Thank you Chris and kudos to Brain3D and CNC Drones. 👍
Brilliant designs, Chris!!! Really impressive 5" quad indeed! 😮
Stay safe there with your family! 🖖😊
I'm definitely excited about releasing a fast forward kit as well... you really need a one axis camera gimbal to see where you're landing. I'm curious to see if you will refine this beyond just a sprinter.
Hi Chris, we can't find the APC 5.25 x 6.25 props in both pusher and puller configuration, so wondering what you used, (8pitch are but as you said ' very extreme')
F YES! Awesome stuff Chris! Cant wait to go really fast.
Thank you very much sir. Looks like a fun build, just ordered from CNCDrones.
Something new. Great work Chris!
Thank you! Something a little different for the hobby.
Hq prop recently released some 5.2 x 8 and 7 x 11 and 7 x 12 props as well
Yep, that is not a coincidence 😁
Exciting times, I cannot fly well at all but been wanting a speedy drone like this for my collection. My favourite drone of all time is AOS 5.5. I did not like the AOS 5UL so much but maybe I didn’t build it so well. Keen on the 7inch frame as well.
Everyone mentions redbull but no one mentions quadmover, when it’s his main design. Smhh.
Quadmovr is the GOAT. Best LOS and high speed pilot.
He's not really the originator though others have built rocket shaped quads before
Chris I would like to see a video of you taking off and landing that Bullet Drone.
FYI- Your AOS 7 frame builder is not including the press nuts. The FC press nuts are installed, but no other press nuts are present.
Please please please make step/stl files available for the rocket! (Specifically step) To be able to mod and fit a modified gopro in this would go nuts!
I'm working on a 7" design for a naked go pro.
Amazing work Chriss!, I have a few questions:
On your video the motors are EMAX 2808 pro 1900kv(?),
Do you recommend the velox like "hinted" in the picture? :)
The current recommended prop is HQProp 5.3x8 thin prop.
In the past (way back 2014.... LOL) i tried thin props and under high speed they bent from the load, making a new scream sound
Isn't this an issue? (planning the 8S route, maybe with throttle limit at first)
Should I put on the build an XT90 or stronger ? we can reach 220A draw (i'm amazed how XT60 lasts )
Lets say I do the whole battery in one pass with the XT60, will it hold?
We once had a drag race on 4S and the winner (i was 2nd LOL) had his XT60 from quad fused to his battery.
Will AM32 be okay for this build? You mentioned something about rampup time that BLheli32 accelerate faster, but I really dont want to buy deadend ESCs... (horrible what these guys did to the hobby, but it will be better after a period)
Awesome vid!
May I ask what material are the 3D printed parts made of on the top speed drone?
Going to try the 2808 1800kv from an earlier build and use the 5.3 x 8 props. should be fun :)
Wow, a high-speed drone kit for the masses?! Super neat. Bet that thing takes a little while to master vs a normal drone, mostly because of the camera angle. Gonna be landing somewhat “blind”.
Very easy with someone standing beside to guide you down for landing!
Not necessarily, I have a similar quad for years now with a 90° tilt camera (I don't understand why using less except if it is for subject filming), and to fly it easily you just have to swap roll and yaw channels, you fly it then like a plane, and for landing I just use a switch to put back channels in the normal configuration and activate stabilised mode for los landing or rth for auto-land.
A strong foundation of acro mode line of sight is probably very helpful for landing something like this gently.
@@MessFPV So, in summary, you *will* be landing "blind" in FPV, so don't try it. Land LOS or with RTH... Still not great. It still means that it's important to have that warning for people that they won't be able to land "normally" (i.e. in acro mode with FPV).
How would they know if you exceeded any regulated speeds?
I'm not sure what the regulations are in your country, In the USA think it's needed for commercial flying that you get a part 107 waiver for high speed operations.
The same way they know if you break any other law. People seeing you and reporting you or you post videos of it on the internet.
This would be awesome when available via iflight or european dealers.
My 5 inch racer does 270kph maximum speed. Cant get it to fly straight without oscillations on top speeds.
Going faster is all about aerodynamics. The apc 5x7.5 are also a great choice.
Any tuning tips ?
Can you please share your dron spec? Thx
Amazing high speed design 🤩
Really wish the STLs were available. I would much prefer printing with ABS on my Voron instead of PETG for added heat resistance.
Wow looks epic! Any sweet chase footage out from this quad?
Are you going to share the 3d files so we can add a bigger battery capacity?
Do you think the texture of the 3D print will have any effect at the speeds it can fly? Would making the surface smooth help or maybe the texture helps like dimples on a golf ball 🤷
Smoother is better for high speed at these Reynolds numbers.
Thanks for not selling the stls Chris (insert sarcasm) but it's a good thing I just got my 3D scanner.
Hi Chris! Do you think a design like this could ever be adapted to long range flying with long flight times?
WOW! Awesome! I saw that fastest drone design few years ago. He is in the Guiness Book for having that fastest drone to fly. Great video! I just got to the part where you said you got inspired by Red Bull video. They were not the first one to do this design.
Great job, congratulations, I respect you and I consider you really good.
I ask you, have you ever tried to laminate the carbon of the frame in such a way that the direction of the fiber is never directed from the motors to the fc?
Mine hit 198 mph today. It is an awesome beast.
Remember pilots, if your country has a "speed limit" for drones, DON"T put the speed in the OSD if your going to post it!
Or make sure you get a part 107 waiver 👍
Most countries have an energy limit not a speed limit or a weight limit it's actually energy on impact
@@markwilliams5654 Pretty sure the US has a 100 MPH speed limit for all drones... But other than that you're probably right - AFAIK most countries base their limits on weight and don't care about max speed.
Chris please confirm motors used, are the EMAX pro series 2808's 1900 or 1950KV? Thanks
Odd to mention the Red Bull record, but not really talk about Mike and Luke Bell.
I'm working with those guys a lot, what they're doing is a little different. This isn't a world record drone, it's a fast camera drone. But absolutely mad respect to those guys. They are really incredible!
@@ChrisRosser A "fast camera drone" that can't take an HD Camera, so you're forced to rely on your FPV camera being good enough...? Which means DJI O3 is about the only option that might be good enough for professional use, and it generally has the worst latency, which is not really what you want when flying at 200 MPH...
@@Vousie then build a drown pushing a Go Pro parachute through the air at 200mph , id love to see that drone haha.
I'm no aerodynamicist but I wonder if it would it improve drag by raking the arms backwards instead of having them at 90 degrees.
Not at these speeds unfortunately, backward sweep really helps when you get into the transonic regime above 0.6M or so. At lower speeds backward sweep increases wing surface area and therefore drag.
This comes from CR, This means it's S tested ( scieeeeence).
@@ThomasAndersonFPV CR?
@@rapamuneCR= Chris Rosser :)
AOS = Art of Science :)
Would love to print this myself if that ever becomes an option! :)
My first drone build will be a 3.5 or 4 inch. Any version 5 kits inbound (incl. motors) for such a build? Did you ever produce a build guide with the anti-vibration using viscous grease? That would be very helpful to difference where to use locktite and where to use grease :)
I think there's been various tests about the grease and it doesn't always work. Better is to just have a low-vibration frame, which most frames on the market already are. I recently built a 5" quad and it's just the standard build and it has super low vibration.
@@Vousie CR already proved highly viscous grease helps in one of his shorts.
Chris, you realize these have just moved into the category of lethal weapon. 😬
the motors are 6S rated so why can you use it on 8S, because it is not the voltage but the power that matters? so I could use any motor e.g. at double the voltage and half the current? thanks
Beautiful ! May I ask what control strategy is used ? Do you tune it by yourself ?
Yes I tuned it myself (quite easy to tune actually) and I made a BF preset for the tune.
Will it be possible to upgrade the camera cage if you are using a previous version of the AOS 7 frame? Just wondering if that would be possible as the front looks slightly different now.
Yes, a new top plate, bottom plate and camera cage is required. If you have the EVO I wouldn't worry about upgrading unless you need one of the new features. Just enjoy your AOS!
why does the current increase when going to a higher battery voltage?
AHHHH COME ON. I just finished designing my own high speed design, weird old frame and custom canopy, but burned out motors because of wrong tune, had no time to fly it with higher kv motors before my holiday because I missed putting a whole to bind the Air unit (!) and the breakdown is more complicated.
i see that you do not put as much emphasis on putting the center of mass forward as Maximo Bell.
Looking forward to see if you get thermal issues while waiting for satallites ;)
If you have no tail the center of mass must be forward. For ease of build, layout and takeoff a tail makes everything so much easier.
Never even seen your reply! As a seasoned KSP-Player I know about the importance of center of mass vs area. I don‘t know if the tails in all that dirty air will produce enough „correcting“ torque before the FC corrects, even with the sliders and filters being as docile as I had to make them to not burn up way to high kv motors. I am going to test that theory soon, my design flies with minor difficulties (RX loss after some promising passes)
Did you ever try pusher vs. puller?
@@ChrisRosser Well, you were right. My design started "fishtailing" at about 270kph when I fitted aerodynamic shrouds to the arms. And without them I struggled and burned out a motor (yes, one?) at 260
Can one Tatu 6s 1800mAh battery power such a beast? In the RedBull drone, they were using 2 batteries if I remember correctly, so I'm not sure how long this can fly on the top speed until battery sags...
cool we all gonna have a chance to have our own personal guided míssil soon😅
Hi @ChrisRosser, great video as per usual.
Do you know of a retailer in the UK? I am interested in a frame.
Thanks.
Not yet, but I'm working on global supply with iFlight
Does this props has cw and ccw? 5.25x8EP. Can't find in official site.
@ChrisRosser
Hi Chris. The AOS 7v5.... Will Avenger 2812 1115kv motors work with that frame?. I know its a little bit big motors.
A little big and a little low KV (for 6s). 2807 1400KV is the sweet spot with a 5000mAh 6S
@@ChrisRosser Thank you Chris. The reason I asked about the 2812 motors is because I already have them build on my FR8 with 8" props, but I'm not a big fan of that frame. So that why I wanted to see if I can gut it and move the components over to the ASO7V5 frame.
Nick from CNC gave me early access on the AOS 7 V5, great flight! Is the X-cell technology gonna be moved into the cine25 or cine35? that's where the vibration reduction can benefit the most
Yes, I'm working on it so stay tuned! It won't be exactly the same X-cell design as the freestyle frames but the benefits are still there.
How much for the new frame?
Expect you camera and vtx to be smashed first time you hit anything and with the camera mount so high up it changes the way it handles, and thats way racers can fly so much better because of where the camera is mounted so its projection is centred to the centre of the quad making it so much better to fly but its way better than that green African quad with the camera so far forward i dont think i could even do a forward roll without looking like a beginner!.
how much battery time does it have on the 6s 1400mah tattu
would you say its possible to upgrade the aos 7 evo to the v5?
we need to paint a Mario world "Bullet Bill" face on it.
I'm stuck on Analog still. Will analog fit all the same in this HS frame? (edit: You answer this at 12:00). Love the new innovative rocket design. ;-)
Yes, absolutely. You can use any analog or digital camera and VTX. Just bear in mind the packaging and use a UFL or MMCX antenna similar in size to the O3 antenna and it'll work just fine.
Whats the weight?
Hey Chris, I would like to carry these at AddictiveRC! I am also an iFlight and Brain 3D Dealer as well.
We're working with iF on this and will let you know with one of our retailer emails when it's ready!
confirmed 56 amps on the 5.2x6 apc 1900kv 2808 1500mah 100c battery 145 mph
Will you sell this as a BNF with O3? In that case where can I throw my money at? 😁
missing DVR - with telemetry?
I don't know how to get that on O3 when recording on board 😅 if you want the log drop me an email and I can send it over
@@ChrisRosser G2 glasses can do it :)
@@ChrisRosser The v2 doesn't do it but the Goggles 3 does.
Hi! Where to get the stl files for the gps mount of the AOS 7?
Thx!
Simply Landing line of sight in horizon mode?
It's pretty easy to land. What really helps is having someone stand next to you and call out the height above the ground. Or land in long grass so you can hear when the props start cutting the grass and know you're low enough to disarm.
can you share your tune?
What is the expected flight time between Kyiv and Moscow? Asking for a friend.
This is not for military applications due to the short flight time. It's for filming at race tracks
Hope you stocked lots of spare parts for the 200mph frame 😂
Chris said lemme just make drone go zoom
My AOS 7 flies really poorly. Please help me tune it. I’ve done everything I can think of to fix it.
Send an email on aos-rc.com with a log and picture of the build and I'll se what I can do.
DRON GO FAST DRON GO FAST DRON GO FAST
When 8S? Then 12S?
12S is still pretty unreliable for hobbyists today. 8S is better but 6S is the best for reliability.
Next : sub 250g analog high speed drone
Not sure why you'd wanna deal with analog anymore... Especially since it won't give you video you can really use. Better idea is the HDZero Race VTXs or maybe even the Walksnail Whoop VTX. Much better quality image, and still a very low weight for a sub 250g.
@@Vousie Yes , but for high speed the weight matters , for a 400mw anlog vtx and camera you will have 3g , for me the analog quality is usable, I also fly walksnail, but the vtx takes more space and just sags the battery more on whoops , if I'm trying to build something efficient I will go with analog , if I'm trying to build something where weight it's a problem, I will go with walksnail
@@rares6216 That's only fine if you're flying fast just for fun or something. But a lot of people want to film things. In which case you need at least something like Walksnail where you can actually kinda use the FPV feed.
@@Vousie but runcam thumb pro exists and is wayyy better than ws
@@rares6216 But that camera *alone* weighs more than the WS whoop VTX and camera... So if lightest weight is really your priority (while still getting usable video) then that'd actually be the best option. Note that that VTX has onboard storage, so you can record 1080p video without interference.
My air65 is faster after the AOS tune.😂 nice Chris.
I thought you were going to say your Air65 is faster than this AOS…
Yeah I did’t, my air 65 goes 201 MPH now through my living room🤣🔥✌🏼
Don't be surprised if you're responsible for really hurting someone because you've made some crazy drone you're going to sell to the public wow 😮
All drones are potentially dangerous and should be flown responsibly in compliance with local regulations. I think drones are less dangerous than cars (and much less numerous) and no-one is discussing banning driving.
Hell yes
I figured you would be dropping a HS variant im so getting one
Awesome, thanks for your support! 🚀
Will you break the world record? I hope yes :)
I helped Luke and Mike break the world record and we plan to break it again soon! But I couldn't do that on my own.
It's not listed on CNC Drones.
Hopefully the links are working now!
Careful with this design... Rotor Riot might scoop it up and send them over to Ukraine... :P
I'd print the spinner in LW-PLA.
Up to, not including, 100mph in the states
Unless you get a part 107 waiver 👍
@ChrisRosser ...well, let's go fast!
put winglets on the propeller
TF is hitting 0 to 330+ mph in 4 sec, 0 to 100 mph in under 0.9 sec.
0-320kph is around 4s. Top speed on 6S around 200mph.
@@ChrisRosser thanks
Just red HS5, I fee, the need for speed.
Shut up and take my debit card. I need that high speed drone. Thanks for doing something different, sir
Any time! I hope you enjoy it 😁
New top speed today at 208mph. Proof on my channel.
Let me start by saying i love what you do for this hobby, however i dont believe a 200mph capable frame or kit should be widely available to the masses. This seems risky to have such a high speed quad easily accessible to folks with potentially not enough experience or sense to be safe
We can make the same argument to sports car manufacturers. Doesn't seem to stop them making 200mph+ cars for the road.
@@ChrisRosser I'll admit, you got me there. Someone was bound to do a high speed kit eventually. I guess it's cool that you did it proper and it'll fund more r&d for the rest of us to learn from. I appreciate what you do, this one caught me by surprise though. Good stuff Rosser. Keep doing you
Your 7inch is tank
Looks like you trying to cash in on the Red Bull one tbh.
I wanted to bring the performance of the red bull drone to every FPV pilot. The innovation is in making their concept into something that is easy to build and fly 👍
Why shouldn’t he? Plenty of people saw that video and wanted one and now there will be one that they can buy so what is the problem?
I also doubt that red bull were the first to design a drone like that either.
Oh no. Someone will make money by providing a scarce and valuable service to people who want it. Scandalous.
@@ChrisRosser that's fair enough. There are files on thingiverse etc for done similar to this.
@@JoshuaBardwell sarcasm. Nice
NGL the aero on this looks pretty shit. Would be way better with just an ounce more thought in the design. But since you've closed source your .stl's, sucks for you since nobody will improve it.
Pretty Awesome , Great job on this. Wish i can just use my OT money and buy a BNF.
Wow. amazing. You've seen @quadmovr 's designs, right? If not they're inspiring. Great Work! Very exciting