This actually inspired me to take my Tele mod even further - I currently have two separate volume controls for both pickups and I replaced that useless in my opinion Tele switch with a Gibson style Switchcraft for quicker operation, but now I’m thinking of adding an extra master tone control on top of the bridge volume 🤔
Fantastic! Personally I would wire the blend as half blend so it only works in position one. Perhaps as an option for folks buying your wired control plate.
Yes it’s called a blender mod, can be wired by a tech or do it yourself. Plenty of schematics online or buy pre-wired harness like Obsidian or Mojo Tone.
Hi there, well it would replace the wiring in there so it would be more of a standard Tele setup. So 3 way and no out of phase. How much do you use those settings? Paul
This actually inspired me to take my Tele mod even further - I currently have two separate volume controls for both pickups and I replaced that useless in my opinion Tele switch with a Gibson style Switchcraft for quicker operation, but now I’m thinking of adding an extra master tone control on top of the bridge volume 🤔
Fantastic! Personally I would wire the blend as half blend so it only works in position one. Perhaps as an option for folks buying your wired control plate.
Cooool! Now I have to get a Bari Tele :D
Could I get this with just the wiring and pots? I already have pickups I love and a custom control plate.
I’m afraid it’s exclusively with a Radioshop set. You never know you might like ours more 😉
We have now made it available in harness only form! Paul www.radioshoppickups.com/product/telecaster-prewired-harness/
Does a similar thing exist for a stratocaster ?
Yes it’s called a blender mod, can be wired by a tech or do it yourself. Plenty of schematics online or buy pre-wired harness like Obsidian or Mojo Tone.
Would this work in my tele elite alongside the mid boost that’s already on board ?
How is the mid boost wired in? Fairly independently?
@@RadioshopPickupsit is engaged by pressing the volume knob down
If you could send me a pic of the wiring via email I could see how we could incorporate it, but in theory I’d say yes :) Paul
Could I use this with my Baja tele that has a 4 switch selector and s1 out of phase switch
Hi there, well it would replace the wiring in there so it would be more of a standard Tele setup. So 3 way and no out of phase. How much do you use those settings? Paul
@@RadioshopPickupsok well then I don’t think this product is for me then. If i had a normal tele I’d buy this though!
Marguerite Springs
Hester Extensions
Laurel Green
Johnston Summit
Thompson Hollow
Strosin Vista
Schiller Grove
Stoltenberg Extensions
McCullough Lodge
Tobin Locks
Beatty Mill
Greenholt Turnpike
Eliseo Cliffs
Gregoria Estate
Vincenzo Lodge
Gloria Curve
Tillman Extension
Boyle Lock
Sporer Mill
Sauer Dale
Strosin Rapids
Schmitt Mill
Charlene Forks
Jevon Street
Laverna Inlet
Reyes Hollow
Carmen Prairie
Murray Pines
Roslyn Fall
King Vista
Dan Cliff
Oberbrunner Street
Leffler Valleys
Heller Skyway
Izaiah Locks
Dach Shore
Rempel Highway
Twila Plains
Lockman Roads
Lehner Crossing
Sabina Lock
Gabrielle Gateway
Jayce Summit
Annalise Lane
Hank Passage
Geo Stravenue
Jett Shoal
Krajcik Pine
McGlynn Harbors
Does it go up to 11.... ha ha
Of course!
Devon Ford
Aidan Glens
Dudley Ramp
Abdullah Forges
Reina Squares
Lauren Flats
Bartoletti Pine
Carlo Trail
Murray Mills
Gerlach Roads
Heaney Plaza
Adah Shores
Beatty Hill
Kayleigh Brook
Charles Bypass
Barrows Fall
Auer Lodge
Rolfson Lane
Floy Common
Noemi Circles
Serenity Unions
Jamil Forest
Nienow Mill
Feest Manors
Nico Haven
Denesik Harbor
Shields Locks
Vicenta Place
Stamm Key
Annette Mills
Shanahan Glen
Crist Pines
Blick Estates
Cody Unions
Adela Mall
Skylar Brooks
Jacynthe Rue
Shanahan Village
Keara Island
O'Reilly Fork
Turner Trafficway
Johnson Stream
Wyman Mountain