OHTOKC CDI Ignition Stator Install Tutorial - Vintage Honda ATC70 3 Wheeler Trike - Video 2 of 2
HTML-код
- Опубликовано: 8 сен 2024
- My biz website: vintagehondami...
Help support this channel by supporting me via paypal donate -
www.paypal.com...
Where to buy - Seller Contact - OHTOKC :
www.ebay.com/u...
/ kc.ooi.1990
OHTOKC CDI Install Instructions for ATC70 (My Google Drive D/L Link):
drive.google.c...
Video Part 1 of the CDI install:
• OHTOKC CDI Ignition St...
Video 2 of 2. Install of modern CDI (Capacitor Discharge Ignition) in a Vintage Honda ATC70 3 wheeler - Effectively doing away with the point / condenser OEM stator setup. Step by step instructions for success. This is applicable to the Z50 Monkey Mini Trail CT70 Dax SL70 Etc.
Located in Orlando FL
Facebook Honda Mini Bike Page:
/ vintagehondaminirestor...
Cool conversion, sir
I don't have a green wire for ground on my kit? Also I have light just use the black wires and connect them?
Thanks for the vids really helped
On a Honda with no lighting equipment (like this), does the lighting coil have any function at all? Could it be removed without any negative effects? Thanks for a great video!
Lighting coil is completely independent of primary spark coil. You could remove it if wanted
👍
Is there a way to know if i have mitsubishi or hitachi flywheel without starting to dis-assemble?
Round and square headlights ..
How do you get a stuck stator off so you can get to the chain tensioner? Thanks
I'll make a video on it today. I have an ATC70 with ruined threads at puller location (Flyhweel). If you are asking about stator plate...Use something to pry it up ( Flathead screwdriver between case and under coil) like I show in this video series.
Have you heard or had any problems with this kit burning out coils one after another? Or do I have other problems
Always a possibility. I did have a problem CDI on another build I did. I still use the kits
@@VintageHondaMinis thanks for the reply 👍 would they be any other thing burning out coils?
@@sketchydgarage I would reach out to the supplier and see if they can send a totally new kit or refund you if it has failed multiple times after repairs. Not sure what the culprit would be
You didn’t have to time it afterwards? And is this 6v cdi system supposed to make the ignition system more reliable?
I have other work to do on this ATC70. I did not check timing with a light to confirm, but since this is CDI and in its form there is no adjustability on the user end. It is all built to do it's thing. The manufacturer did tell me that it is designed to provide some spark advance as RPMs increase
@@VintageHondaMinis Great video! As the CDI has no external sensor, it can get the timing only from the position of the magnets of the flywheel. Could you check timing and it's advance with rpm some time with a strobe? Thanks!
Could I get one of these for a Mitsubishi ignition?
Yes. Message KC Ooi the seller of these kits - I provided his contact in summary section of this video
My cdi box didn’t come with a ground
The new design does not require a ground. Your ok
Your instruction link no longer works.
That’s great while they work, cdi quits and your done. Stator, Points & condenser lasts 10 years and cost 39 vs. $129 😑