【加工動画41】旋盤でモールステーパー/How to make morse taper on a lathe
HTML-код
- Опубликовано: 7 фев 2025
- 4番のモールステーパーを加工しました。
安全に配慮してアイデアの種にしていただけたら幸いです。
※動画のような自作アーバーでのチップソーによる加工は特に危険を伴います。
参考にされる場合は下調べを十分にして安全に配慮しながら自己責任でお願いします。
※動画の一部、面取りおよび工作物の脱着時に軍手を着用していますが機械の駆動中は巻き込まれ防止の為に外していますのでご安心下さい。
0:07 快段目盛15cmスケール(定規):amzn.to/3EoY8L0
5:04 チップソー: amzn.to/3r3wI47
8:18 ダイヤルゲージ(0.001mm):amzn.to/3jvPG59
8:49 粗削りチップ/Roughing cutting insert:amzn.to/34bOqgc
11:05 仕上削りチップ/Cermet insert/:amzn.to/3r14JFA
撮影機材:amzn.to/3bNBj5D
使用した旋盤/Lathe model: ワシノ/Wasino LR-55A
背景音楽/BGM: New Land - ALBIS
We would appreciate it if you could use it as a seed for your ideas after considering safety.
技術もアイデアも凄いなと思うし、なによりいつも加工機や加工機周辺が綺麗に掃除されてるのが本当に凄い。
Everything is extremely clean. Looks like it belongs in a TV advertisement
Vdd, esse profissional, e extremamente cuidadoso, os videos, que ele posta, da prazer em vizualizar, 👍👏 , ARIGATO, !!
That is the most clean lathe machine I've seen in my entire life
It’s nice to see professionals that know how to treat their machines. Quality and precision can only come from well treated tools.
Such beautiful photography and story telling.
Greetings fellow machinists 👋🏻, I never comment in videos so this is a first, you sir embody the Japanese culture, efficient , high quality and precision , creative with the simplest tools , your craft is pleasing to the eye , excellent job sir .
いつも素晴らしい動画をありがとうございます。
次はこれで何を作るのか楽しみです😊
Very nicely presented, a masterclass in turning thank you
another class in machining i have learnt ,thankyou again Swap Lamp
Очень красивая работа! Результат отличный!
Com este vídeo só não aprende quem não quer e um grande professor 🙏 parabéns
Buen trabajo gracias por sus enseñanzas saludos desde Cuba
You didn’t show anywhere for those that don’t know that you used the top slide to cut the taper. A major oversight if this is intended to be educational.
Nice work. We shared this video on our homemade tools forum this week 😎
いつも面白いアイデアを見させていただきありがとうございます😊
次に作る物はタップホルダーもしくはダイスホルダーと予想してみます🙂
Excelente trabajo, el barrenado no utilizó taladro , lo hizo puro torno , buen aporte para los amantes de máquinas herramientas .
Saludos 🤝 desde Sicuani Perú 🇵🇪
Greetings from Poland. An excellent film showing the knowledge and craftsmanship of the master
Excellent workmanship!
Só os grandes mestres saber fazer uma obra de arte
Always a good evening with new Swap Lamp
Beautiful work
Thank you for sharing mate! I really enjoyed it. I will Try to make one 🙏
Nice fit! Very professional
Good work 👍 and great efforts for reaching accuracy...
Excelentes videos! Me gusta mucho como trabajas, con limpieza y precisión. Excelente cono Morse. Saludos desde México 🇲🇽
A pleasure to watch as always
Perfect as always
This beautiful 😍
Excelente barra para sujetar y hacer un buen uso de las carátulas en la máquina. Gracias por esos aportes para facilitar el trabajo las
máquinas. Saludos desde Bucaramanga Colombia.
Great work like everytime. 👍👍👍👍👍 I'm a bit jealous for your lathe.
What lathe is it?
Parabéns pela qualidade e pela aula!!!!
Great work. Thanks you.
True machinist 100%
Bom demais um dia ainda consigo comprar um torno para meus projetos
Parabéns
i need to learn on how to change gear when threading bolt. thanks
Good lathe .
Всегда чистый станок. Приятно смотреть! 👍
You really trust in chuck jaws concentricity to use your lathe as a mill.
NICELY done
На такую работу,можно смотреть вечно ❤❤❤
nice work
So Great
Very well done.
Nice to watch your careful workmanship. Old Retired Machinist worked in Job Shops, we learned to Tap under power. Give it a try, you're going to be surprised how easy it is.
Amazing finish, I've done far worse on my surface grinder.
This is good for watching but to teach people, be sure to accompany the video with words, this is even better if not this magnificent
Excelente Amigo! Muito bom esses dois dispositivos.
Aqui no Brasil, o torneiro mecânico está quase extinto, então é muito bom ver outros trabalhos de torneiros de outros países.
Abraço 👍
Muy interesante los demás comentarios, sobre todo dónde aclaran el material que usan
Nice job. What insert is that You used for finishing?
Thank you for watching.
Sumitomo Electric's T1500A cermet.
Hi, nicely presented. Understandable. Nice looking high quality lathe. Getting Morse Tapers within tolerance is a demanding job. Well done. If you can find translations of George Thomas' books they would be well worth a read.
Beautiful
Congratulations for 100k subscribers
Thank you very much.
Thanks to all of you.
Good job….👍🏼
刃物台の方に材料を固定する発想はなかった。
Can I also use a POM-C nut or steel instead of NYLON?
Thank you for watching.
yes. As long as there is friction between the end of the arbor and the cutter, it doesn't matter what you tighten it with.
I simply chose a resin washer to avoid damaging the paint on the tipped saw.
4番って、ネジでいうピッチなどの規格内の番号ですか。
スパっと食い付きますね。
ご視聴いただきありがとうございます。
はい。その通りです。
ネジ規格のようにテーパ規格があります。
モールステーパー番号の4番に加工しました。
教えてください
1.5度位をテキトーに振って、ダイヤルゲージで振れていないかを確認後、センター側に手送りハンドルで走らせて マイナス3/100 ならモールテーパの4番の角度で間違いないと確認すればいいのでしょうか？ 1° 29′ 15″を慎重に適当に傾けないとモールステーパにならないでしょうか。
ご視聴いただきありがとうございます。
テーパー合わせは正確に行う必要があるので動画でもダイヤルは1目盛りが1/1000の物で確認しています。
動画のようにテーパ部分の端から端まで3/1000程度の誤差ならモールステーパとして使用できました。
旋盤しかなかったら有りですね。
何か？新しい？やり方があるかと観ましたが ジグ作っているだけでしたね
まあっ面取りとR取りに ハイスを使っているのは良いですね
Good
เยี่ยมจริงๆ
Alsome job.
Отлично😁👍
What kind of lathe is that?
Thank you for watching.
It is a model called Washino's LR-55A.
What oil are you using?
Thank you for watching.
The cutting oil I use is Castrol Variocut C210.
کارتون عالیست
Превосходно!
What lathe are you doing the job on
Thank you for watching.
Washino LR-55A.
Butifull
This channel rivals TITANS OF CNC for subscribers and views.
Both great channels but unusual numbers none the less.
parabens
Ставте центровку та інші інструменти в цангову оправку щоб не провернуло в патроні, у вас все настільки гарне і акуратне, що не хочеться щоб інструменти псувались. Дуже все гарно і чітко зроблено.
как всегда очень круто
懐かしいなぁ…テーパは工業高校の2年でやった記憶
Какой фирмы станок?
Спасибо за просмотр.
Это токарный станок Washino LR-55A производства Японии.
I thought the dial indicator was stuck :O)
こんにちはスワップさん、僕は先生*の動画を見てから、機械加工にと日本語にもっと上手より十二月。I mean 先生 as more polite term for not natural ”あなた”, hope that I wrote upper sentence well. Did I any mistakes? I would expect only honne :)
Did You used insert for finish with 0,2 mm radius of corner?
Thank you for watching.
The first half of the sentence is very natural.
The second half of the sentence is a little confusing.
機械加工と日本語が十二月よりもっと上手になった。
If it is not in the above order, it may not make sense.
”先生” is a word used for people with particularly excellent knowledge and skills, and confident people are happy to be called that, but it is also used for ironic purposes to demean arrogant people, so be careful.
That's right. For finishing, I used an insert with a nose radius of 0.2mm.
@@SwaplampJapan Thank You for helpful counsels, I used 先生 term, because in my textbooks is written, that "あなた" is designed for especially case(for example: If we do not know a name of our interlocutor), but when I talk with unkown for me person which is great in certain field, I think i ought use 先生. If I know his name, I'll call him with his name and adequate suffix, nonetheless what I can do if I do not know his name, while he deserves for calling him 先生? Supposing existing many rude phrase like "てめえ"、"お前"、"貴様". As casual words I found only 2 acceptable ways to say "You", "お前さん"、"あんたさん".
@@nerokuwa4607
You understand very well.
I think it's okay to use "先生" because you can't make a mistake in calling "先生".
In recent years, as long as there is no direct hierarchical relationship, there is no problem in calling anyone "あなた".
👍👍👍👍👍👍👍👍
Senban ikura desuka?? Watashi ha indonesia jin desu
Thank you for watching.
This lathe was manufactured by specially reproducing a past mass-produced lathe, so it cost 8 million yen.
When it was mass-produced, it was available for 3.5 million yen.
Nowadays, it is common to buy second-hand, with good condition ones selling for 800,000 yen, and badly used ones selling for around 150,000 yen.
👍👍👍❤️
ThanK you 👍❤️
Thank you for watching ❤️
@@SwaplampJapan ThanK you 👍❤️
Это класс высочайший
Привіт з України 👍👍👍🤝🤝🤝🇺🇦🇺🇦🇺🇦 Удачі і мирного неба над головою.
Ola Irmaõ Ucrâniano, como tem passado? O mundo e em especial o Brasil e nós Brasileiros, temos fé em Deus que a páz volte a reinar em seu país e no mundo!! um grande abraço e que Deus os proteja sempre Amem. 👃👃👃👃👃👃👃 GOIÂNIA GOIÁS BRASIL.
💪💪💪👍👍👍
何をしてるのか分からなかった。
👍💐
Ещё было бы интересно какой инструмент и какие режимы работы
по роликам (вы)посмотри коменты там он рассказывает
Not a good idea
what brand is the lathe? looks beautiful
Thank you for watching.
The lathe brand is Washino.
The model is LR-55A.