Terminator Muzzle Brakes compared to 13 others on a 338 Lapua Magnum
HTML-код
- Опубликовано: 5 фев 2025
- T2, T3, T4 Terminator Muzzle Brakes compared to 13 others on my Remington 700P 338 Lapua Magnum weighing 3.64 kgs, 8lbs, shooting 300 grain Sierra Match King projectiles at 2600 fps. See more from me at terminatorprodu... thanks for watching.
I really like the no BS way this was conducted. Seen a few videos comparing brakes and it was some dude shooting a rifle and him giving his opinion on which was best.
Thank you for this awesome and straight forward comparison! Would absolutely love to see a decibel (noise loudness changes)
comparison for the same set!!!
Just installed my T3B break on my Tikka T3 Tactical in 308. What a difference, feels like a 22LR. Awesome product with good results.
Thanks Kevin, glad you like it ;-) Cheers Greg.
WOW that was really cool. Something you don't see every day. Try the Cortina break.
Great vid. Thanks for the info.✊🏻
Ya sold me bud. Would like to put one of these on a Savage .338 I plan on purchasing.
Theophilus Fernleaf Thanks :-)
TerminatorProducts I have one on mine now and it so sweet. I can finally keep an eye on my shot through the scope and watch the trace. These really make a sizeable difference over the stock Savage break, which I thought was pretty good when I first started using it. Never realized it could get so much better with the T3. After watching this I would love to get a T4. That will have to wait for my next Savage .338. Highly recommend!
Doc Tari Thanks Doc :-)
I just got a 338 savage 110ba. Might need to deck it with a t4!
Hey Greg, I'm trying to decide on a muzzle brake for a couple of my rifles. I've narrowed it down to Kirby's Painkiller line, or your Terminator Line... Have you done any testing to see what the differences in muzzle rise were (especially with the Painkiller having the ports on top specifically to combat this)? Im sure many people would love to see this sort of test as well! The one im most considering is my 700 in 7mm Rem Mag, so the choice would be the Small Painkiller or the T1 Terminator. Thanks Greg, keep up the amazing work, and please do more with the 375 DCM!!
adam13ooo Thanks Adam, I've found by reducing maximum recoil you don't need top ports.Top ports can push the barrel into the stock & cause undue stress on the barrel & action.In this video you can see the muzzle rise a little but its a pretty light 338 Edge with a T2 being shot by my young daughter who is barely holding onto it ruclips.net/video/cNZLMuKHxbI/видео.html Cheers Greg.
i love mine a t5 on my srs desert tech 338 i have a t-5 gentle giant
Great video !!
Came for the muzzle brakes, stayed for the accent.
Hi Greg, I know you’ve delt with Mark and Sam over in Aus, have you done any testing on his brakes. You two seem top of your game at what you do. Always been interested to see the results.
i wish this would be addressed, currently looking at one of theirs. Quite expensive to get here in the states.
Thanks for the video.
I would like to see a comparison between the T4 and a Cadex MX-1 muzzle brake.
Hi James, I'm hoping to borrow a Cadex 375 Cheytac from a custom when I fit a T5 to it some time after the lock down. Cheers Greg
Recently purchased a T4 for my 338, would you guys have any interest in a factory christensen arms 4 port brake? Figure if you do another youtube video you could throw it into the comparison
Did you compare the APA Fat Bastard and it’s other models ?
There is a comparison here ruclips.net/video/vkEcALGfg5g/видео.html
I have a Remington 700 stainless in 33RUM. I have an older radial brake on it. I think the threads are 9/16's. I want a streamlined look9nit a big knob on the end of the barrel. Which Terminator do you recommend? I am willing to give up a little comfort for looks.
Hi, thanks for your enquiry, please contact me through my website terminatorproducts.co.nz/ and I can get you sorted. Cheers Greg
Your neighbours must hate you, even if they are 5 miles away! :D
Hi, its not too bad, plenty of hills & it is a Rifle Range in the Forestry ;-) Cheers Greg.
Hi Greg, I have a 28 nosler with a 0.64 inch barrel diameter at the tip, what brake and what thread size do you recommend? Thanks....
The the T2 with 9/16 x 24 or 28 or metric M14 or 15 x 1, the 5/8 x 24 thread is too big & the shoulder will be too small. Cheers Greg
@@TerminatorProducts thanks.....what do yoi think about the 1/2 x 28 compared to the 9/16 x 24?
@@zr1ne 1/2 x 28 will work but 9/16 x 24 would be "better"
Which Terminator break do you recommend for a Browning white gold medallion in 7mm Rem Mag?
Hi Aaron, depending on the muzzle diameter & thread, the T1 or the T2 will work great. Cheers Greg
Hi , i have a Sako Trg 42 338 Lapua , will the t4 terminator black fit it without gunsmith assist ?
HI Firuzan, the T4 will need fitting by a Gunsmith to index it, then coating black, I make the TE for the TRG ruclips.net/video/KzC1nyCXJjs/видео.html Cheers Greg
Tried one, never ho back to other products!
Thanks ;-)
Also looking at your Terminator vs Pain killer style brakes. Looking to get a 28 nosler. What would you recommend for the 28 nosler in your brakes? T2. T3 ???
Hi Brian, thanks for your enquiry. Depending on muzzle diameter either will easily tame the 28 Nosler. Cheers Greg
Cool vid, I have a savage in 338 lapua with standard muzzle brake, are the terminator brakes any louder? Cheers ben
Hi Ben, Sorry, I haven't tested how loud brakes are, you need proper equipment to do so. You should be wearing hearing protection with all rifles even suppressed ones unless they are using subsonic ammunition, they will all damage your hearing. Cheers Greg
I reckon the one you couldn't name was the Accuracy International 🤔❓
Hi Billy, There weren't any AI brakes there, here is an Accuracy international brake comparison, the way they are fitted is completely different to most other brakes so they aren't interchangeable with other brakes, ruclips.net/video/UKsHw-NqaqI/видео.html Cheers Greg
I put a T2 on a 300RUM sps.....kicks like a 243 now.....not kidding
Thanks Joel ;-)
Sounds like a Howitzer but hardly any recoil haha
Yep, recoil reduction has a price unfortunately ;-(
Hi, i recived a T2 terminator muzzle brake from my brother, it was used on a 6,5 creedmore, but I`m fitting it on my 30-06, but how big is the senter hole supposed to be? 30-06 is 7,62mm is 8mm hole to small?
Best regards from Norway :D
Hi Chriz, 8.5-8.6mm through hole for 30-06, .308 plus 0.030". Cheers Greg.
With out brake it kicks like my 4590 wwinchester 1886
Test against SJC & Ultradyne's brakes. You're testing against bottom tier brakes.
Thanks Cali, I would have if they had been available 8 years ago when I did this comparison, Cheers Greg
how was the gun firing?? haha
The scale skips 11