Honeywell DCS System: PID Controller! Programming part 3! PID controller practical explained!

On thos video,O have explained about the basic functionality of PID controller. hope you like the video, watch it completely & let me know your thoughts

[@allinonechannel8717]

Thanks brother please explain more about forcing in compressor logics ...
You are giving very good explanation continue your great journey 🙏🙏

[@Suresha2836]

Sir EXCELLENT video and explanation sir, thank u so much for ur support sir

[@furat49]

Very Informative Videos you are posting Sir , Please keep up the Great Job and we are looking for Honeywell Safety Manager explanation if possible please , Much appreciated

[@automationwithmukeshdayama6100]

Nice videos for learning

[@منیرسلیمی-ق9د]

Very good
Keep going 💪

[@ahmedelsayedfromuk6461]

thanks for your effort

[@nayrbsworld3048]

nice. please create more

[@fatehmahammad]

Nice video ☺️☺️☺️

[@Nitin-dn5xi]

What about Future scope in Honeywell DCS ???

[@binayakrath6373]

Sir I am greatful to u ... please make videos on mark 6e programs for freshers with some basics...Thank you 😊

[@teaminstrumentationcontrol4006]

Ok. Will try in future to cover the basic as well as advanced things related to GT & control system

[@automationwithmukeshdayama6100]

Make more videos of Honeywell programming

[@teaminstrumentationcontrol4006]

Sure

[@ChemEnggWisdom]

Make a video on tunning of controller

[@pankajshrimali7776]

Experion pks starting se samjhao
Jisme ek dum new user h to wo kese open krega, kya kya assign krna padega aur normal close loop ka dialogue run krke batao please

[@haideralwafee8815]

Thank you so much.
I work in an oil refinery. There is a Siemens stg800 electric power station.
The dcs pcs7 system and the Honeywell refinery system ...
1- How do I transfer the signal between them?
2-And if the signal is transmitted and there are problems when operating through the Honeywell, what is the solution?

[@teaminstrumentationcontrol4006]

Great to hear. Usally such kind of communication happens through modbus. If distance is more then in that case optic fibres are laid. These checks are done during engineering phase only. I am not aware about the distance & architecture in your plant, so i can not comment more on it. Generally you should only monitor the third party systems from DCS & if you want a control then in that scenario it should be hardwired. I believe your doubts are clear a bit now.

[@samirghedjati4024]

@@teaminstrumentationcontrol4006 If you wanna control, you should use OPC protocol.

[@sachingupta6883]

Please tell me how to make embedded shapes in Honeywell DCS

[@gstwithpooja7148]

Sir please make a tutorial video on honeywell ipc programming

[@gstwithpooja7148]

or overview VIDEO of Honeywell EBI 400

[@teaminstrumentationcontrol4006]

Sorry, I have exposure on EPKS DCS, C200 & C300 controllers. I never came across Honeywell IPC & EBI platform.

[@ChemEnggWisdom]

Controller is direct acting and Control valve is reverse acting then how to reverse the output of controller?
(Other than using reverse controller)

[@teaminstrumentationcontrol4006]

There is one more option in positioner also (For direct & reverse action setup), you can use that if you don't want to use the PID Controller option. It is best to change the action in PID controller itself

[@Suresha2836]

Sir can u please teach us personally sir, iam interested sir, and I will pay for course sir

[@CATips]

EPKS

[@teaminstrumentationcontrol4006]

Yes.

[@niharkdash3099]

Sir is there any other part of PID?it's written PART-3

[@teaminstrumentationcontrol4006]

No. It is a part 3 of programming series. Typo mistake

[@Vcstrwqczg21-sw7ru]

Pls make in hindi

[@shubhamroy13]

Sir make this video in hindi plz.

[@rockmusic2742]

Sir Hindi me video banye