Ultimate Chuck Removal and Gear: Dewalt Brushless Cordless Drill Assembly Guide

Hello Viewers!!!
In this video, please watch my Maintenance Guide on how to remove the "Dewalt Brushless Cordless Drill Chuck" and "Gear Assembly" through the process of "Disassembly/Assembly" from a Dewalt 18V brushless cordless drill. While chuck removal is typically straightforward, this particular instance proved to be challenging, prompting me to disassemble the drill's gear assembly for a unique approach.
Dive into the crucial dissection of Dewalt 18V drill chuck removal and uncover the secrets that make this process a game-changer! Don't forget to like this video, subscribe to my channel for more exciting content like this, and hit the notification bell so you'll never miss any future video
Join us as we shine a light on service lights, blinking lights, and maintenance tips for Hilti tools. 🛠️🔧 #diytools #drillgear #powerdrill #cordlessdrill #toolreview #toolrepair #chuckremoval #dewalt18v #brushlessdrill
🔔 Subscribe to the channel: / @powertoolsrepair
✅ Stay Connected To Us.
👉 Instagram: / powertoolsrepairchannel
👉 Facebook: / powertoolsrepairyoutube
👉 Tiktok: www.tiktok.com...
=============================
✅ Recommended Playlists:
👉 Makita Repair:
/ watchv=p9my80wyope&lis...
👉 Dewalt Repair:
• Ultimate Guide: Cleani...
✅ Other Videos You Might Be Interested In Watching:
👉 Dewalt Drill chuck replacement:
• Dewalt Drill chuck rep...
👉 How to change melted Makita 18V:
• Step-by-Step Guide: Re...
👉 Milwaukee M12 battery not charging repair:
• Milwaukee M12 Battery ...
👉 How to repair Bosch GWS 20 230:
• Bosch GWS 20 230 Big A...
================================
✅ About Power Tools Repair:
This is where the Power Tools Repair Intro begins!
Power Tools Repair is your ultimate destination for everything DIY and power tools! If you're a fan of Makita, Dewalt, Hilti, Bosch, Milwaukee, Hitachi, and more.
You've come to the right place. Our channel is a haven for tool enthusiasts, DIYers, and professionals alike, offering a treasure trove of content dedicated to the world of power tools, repairs, and restoration.
If you want to send your power tool for repair please contact via email.
✅ Email: [e-mail]
🔔 Hit the Subscribe Button to the channel: / @powertoolsrepair
=================================
Disclaimer: We do not accept any liability for any loss or damage incurred by you acting or not acting as a result of watching any of our publications. You acknowledge that you use the information we provide at your own risk. Do your research.
Copyright Notice: This video and our RUclips channel contain dialogue, music, and images that are the property of the Power Tools Repair. You are authorized to share the video link and channel and embed this video in your website or others as long as a link back to our RUclips channel is provided.
© Power Tools Repair

[@тихон29ру]

Патрон бывает щёточным ?

[@doctorlefthandthread]

Good video it's a real mission getting these off

[@powertoolsrepair]

Thank you, it looks easy if yiu compare with some Hilti hammers

[@MrStrat01]

Ah, ah, ah .... l'étau mobile, trop génial 😂😂

[@powertoolsrepair]

👍

[@hariwirayanto6102]

Thank's..
what is the problem, hammer works when not in hammer mode?

[@kennethcalliste2606]

Thanks for that video really appreciate it... I was able to rebuild the transmission on a tear down drill I got. 👍 👍 👍

[@powertoolsrepair]

I'm happy to hear that

[@Funky_Geek]

Thankfully I found another video that shows the correct way first time as opposed to this one where you eventually got there.
Not a great advert doing it the wrong way first time… thinking about potential damage to your drill 😮

[@powertoolsrepair]

Thats great, can you explain where the mistake was?

[@Funky_Geek]

@@powertoolsrepair The first part of the video where you were unsuccessful. It shows bad practice as this potentially damages the drill internals (gearbox).

[@YiZuSc]

Gracias por el video, espero que fuera de cámara hayas agregado la grasa suficiente, sino creo que lo que se tronará ahora será la transmisión..

[@orangewitchchild222]

im sorry but this video was so hard to keep up with.. there was no extra info to help go along with.. and a lot was half out of frame... My drill will only turn in 1 but stalls in 2

[@powertoolsrepair]

Hello, then you need new gear assy or plastic gear cover because gears on it is damaged

[@redamor9182]

I'm sure I don't know how you fellers work in gloves buggered if I know

[@powertoolsrepair]

Its easy when you use to work with gloves you cant understand how others work without them

[@alirezazare243]

A much easier way to take it out without opening the gearbox, you can put a bush on the aluminum part where the handle is used to close the handle, and fasten a bush to the neck of the mandrel and make two holes on both sides of the bush by nailing it and two long screws in the door. Tighten it until it reaches the end bush around the aluminum neck and tighten it. In this case, it acts like a puller and pulls the mandel out with the shaft, and there is no need to open the drill and gearbox.

[@powertoolsrepair]

Thank you, I will try this way next time

[@alirezazare243]

@@powertoolsrepair I hope I have made my point, my mother tongue is Farsi

[@donnykiofetzis5775]

best way to kill your gear box. try an axe next time

[@powertoolsrepair]

Thank you, I will try next time

[@RepartidorTruper]

Si tuvieras fijo tu tornillo no hubieses hecho todo ese procedimiento sin sentido.

[@powertoolsrepair]

Maybe you are right

[@dmmultimediamx]

that drill chucks from Dewalt are complete TRASH

[@powertoolsrepair]

Sometimes they just fail fast...

[@alirezawinterkorn6462]

Too bad work

[@powertoolsrepair]

Can you explain why?

[@danijel124]

So dont buy dewalt. Got it 😄

[@powertoolsrepair]

Buy it 😅

[@randyhertzberg7549]

Who buys a vice and doesn't bolt it to the bench ?

[@powertoolsrepair]

You can be surprised by the answer 😁 now they are bolted😎