CAN AM OUTLANDER 1000 DALTON Clutch kit install part 2!
HTML-код
- Опубликовано: 27 ноя 2024
- Installing a Dalton clutch kit is key when you buy a new ATV/UTV, I know sounds weird right....shouldn't they just be ready to ride? Yes they should but they aren't. In part ! I show you how to remove , install and replace the Primary clutch - Available at powermodz.com
Авто/Мото
![Twenty One Pilots - “The Line” (from Arcane Season 2) [Official Music Video]](http://i.ytimg.com/vi/E2Rj2gQAyPA/mqdefault.jpg)
Love your informative videos Louie. Great information. I've heard that belts when new are not directional, the arrows are only for putting a used one back on the same way it came off. As it needs to spin the same way once it's been used.
Great info. I got here because my daughters 2020 can am outlander with 78 miles center bolt from her secondary clutch popped out. The bolt cracked. Im thinking this bolt from the factory should be a high tensile strength because it plays a huge roll in keeping resistance on this spring full time. Thank you for the video. Im going to go back add locktite and a torque to this. Thank again.
Good job my friend ... thx for all the good info. Part 1 was solid too.
many thanks for watching
How do u like the clutch kit, does it make it for responsive, and pull harder, I have a 2018 xmr 1000 renegade
amazon and ebay sell and angle gauge tool cheap. i use it for degree settings(block bolts mostly)
enjoy your vids!! thanks for all the info
What's the name of the tool?
Also the pitch of the all thread if you perhaps now?
So what you are saying is, if we invent a clutch spring compressor, patent it, then we can retire? Good video man! I don't even own a bike yet here I am!
there's only one way to find out!
Hi looking for a little help the primary clutch stud, comes out to insert removal bolt I can't find the tourq spec for the stud itself your videos didn't remove it, so didn't cover that, do you by chance know it? Thanks 2017 xmr 1000
you don't have to sand the surface area of the clutch? seems like since you had it out you could have went horizontally/vertically with a scrub pad
I am trying to find the countershaft holder and the other tools and I cannot find them anywhere please help
I got a 2018 can am renegade xmr1000r and I put a dalton clutch kit in it and instead of putting the stud and nuts in it a just put the old style bolt in it and it is way better got it from my dealer
on 570 both primary and secondary are just torque to yield bolts. interesting video a lot different tho.
Hey, ive been looking for that exact clutch holder that you've got here, can you please tell me where, or if you're able to order one for me, thank you.
New to quads. What the reason for the clutch kit ?
The only part I needed to see is the struggle to put it on 😢
What is part number of the clutch lock up tool???i can’t find it online anywhere??just bought same dalton kit for my renegade xmr1000
Where can I get that holding tool for the stud installation?
Get yourself a nytro 1000 the 121 x15 track nytro Fx they come with Fox floats and they stand straight up and down
And Just like that.. I wanted a YAMAHA. Reminded of me why snowmobiles are so expensive.
when are you going to start getting the snowmobiles back into the videos? Did you sell the axys because of the low snow conditions in the last few years, to be able to buy the xmr?
It's time to get the sleds ready !?
When you gonna do a update on the monster elan would like to see that thing rippin! It’s been forever
is there a link to buy the secondary tool for removing the secondary stud? i just bought the stm for my 19 outlander max xmr to pair with my cvtech primary
BRP
Are u going to the Toronto sled show?
Can't believe Dalton started on ice ovalls
I have the 2017 version of this bike, noticed you put the BRP belt back on after the clutch kit. Any recommendations on aftermarket belts for these machines?
I really like the new beadlocks and 30” Cryptids...tempted to get a set for my XMR.
Thanks for the videos btw...I enjoy your channel.
ya id have no issues running an ultimate or other belt.
Mavericks trail belt is the best. I have both machine. I seat melt yet?
U seat melt yet 2012 2018. U will see tin foil tape every where. It is one major flaw. Muffler right under ass. Power this bike is 89hp low gear. Mine slowly breaking in 148km do far was 114km
Skid plates/C.V. boot protectors!
Watch pitch is the m10 nuts
how did you get the cover off without removing the entire footwell?
its tight - i think i used a universal
Brp does not have the tools please send link
Wow this is exactly why I’m not a can am or ski doo guy. Way way way over engineered. Great skills though and yeah they do it so you have to bring them to the dealer and pay that $100 plus an hour shop time.
Man this is the exact reason I swapped to Can-Am compared to dealing with the wet clutch
I want to now if u sell the clutch tools for the
Xmr 1000
What is torque for primary nut thanks
Could we get a snowmobile update please ?!
Please help!!! Does anyone have the secondary stud removal tools used in this video?? I.e the countershaft holding tool and stud remover
How much r the tools..i need them for 850 xxc..do u no
Id like to have your knowledge and work with you great job..
I just buy can am and ride I have never needed anything but new tires. I don’t try to break it that costs money!
@ 5:03 sounds like ceramic composite.
Will 28/10/12 tires fit on the front of a brute force with out a spacer?
Or do now where I can get them
I can’t access your website from Greenland. It says I can’t access from my country.... whats the reason?
try again we have changed it ...I think...
PowerModz just tried again, still no joy. Just wondering, if it did work, would you be able to ship to Greenland?
it depends on what you need but I can ship pretty much everything. email me at Lshobie AT yahoo dot com. and let me know what you need!
I’d love to, the problem is that I can’t see what stuff you have without accessing your webside. I used to be able to get in when the website was new, for some reason it won’t let me in now. I’d like to see what you have for a 2016 Axys 155” 800.
Dealership o good know. Tools can am will lend it out.
a lot of work for a new bike. >?
Why are you on your stock wheels
Gavin Burkett he explained that the factory cryptids are called 30” tall but they’re actually only 29”, so he bought some actual 30” ones. In the video he has the actual 30” tires on bead lock wheels but the rear are stock. He made a video installing the new tire and wheel combo, but I guess this was just filmed before that.
Lol that guy. Ya don't get wet drive 300 km first. I just put second tank in it. I do not know how to get my Stuff on here.?
can you go back to snowmobiles?
Lol bruh there's no snow 😂
Just like. Skidoo. How many times u do that that's my bike. Yes it need lock. Right wheel not locking that good 7.7 hours it's mint. It's causing nothing but havoc in my town people fucking hate us n dirt bikes oo n cottage love see does.
This voids warrenty.
6 month warranty I got. Why. Because of all u guys that take it and mud burrie it. White meetal bra. Got in a fight some guy said got spray with gravel. Lol ooh she throws
gloves? really?
yup really, you'll understand one day.
I've done more mechanical than you ever will. I agree it's good to be safe though.
E
Can Am / Polaris both cheap badly made overpriced bikes.
Lol
polaris is cheap as dirt
Liein?