How to build ringlock scaffold system?
HTML-код
- Опубликовано: 9 сен 2024
- Ringlock scaffold is a new type of scaffolding system, is after the cuplock scaffold upgrade products. Also known as chrysanthemum tray type scaffold system, plug tray type scaffold system, wheel tray type scaffold system, buckle tray type scaffold, mainly used for large concert light frame, general viaduct bridge engineering, tunnel engineering, background frame. This kind of scaffold socket diameter 133mm, 10mm thick disc, disc opened 8 holes, using φ48*3.5mm, Q345B steel pipe main member, pole is in a certain length of steel pipe every 0.60m welding on a disc, with this novel, beautiful disc connection bar, with a connecting sleeve at the bottom. The crossbar is made of a plug with a pin welded at both ends of the steel pipe. When installing, you only need to align the crossbar joint with the chrysanthemum disk position, and then insert the bolt into the chrysanthemum disk hole and through the bottom of the joint, and then hit the top of the bolt with a hammer, so that the arc surface on the crossbar joint and the vertical rod are closely combined. The disc scaffold system has the advantages of multi-function, less structure, convenient construction and disassembly, high economic efficiency, more convenient and faster use, large bearing capacity, safe and reliable.
THEY ARE CALLED STANDARDS...NOT VERTICAL POSTS...GET IT RIGHT
There called vertical too just depends. Most in the field call them legs
I'm a foreman and on my build sheets and paperwork they have it listed as verticals