One technique I've learned from masking and painting walls is that when you have put on the masking tape you first paint it with the colour that is under the tape and when that is dry you paint it with the second colour. That way you get perfect lines. So in this case, after you put on the tape, you should have painted the tape edge red, and then white. Really cool kitbash build tho!
@@marcushillerstrom25, advice on how to improve is always welcome, especially when you want a good result. I think I'd seen this tip in a video a while back, but I couldn't quite remember how to do it.
Awesome job! For your ending shots, could you possibly make that segment a bit longer? It seemed a bit too short and didn't really do your build that much justice. (in my humble opinion)
I will. I used this as a making of video hosted here for people who came from my Instagram and had seen the final piece but I hadn't banked on it doing well independently here. I am hopefully going to make more videos in future and will do so
Wow! This is a BEAUTIFUL build! I LOVE the details! The amount of greeblies you have added really sets this apart from a lot of model builders who don't go into as much detail! Have subscribed to your channel!
I've had similar requests, I've only added these so my Instagram followers can see some of the process, so wasn't thinking as much about the narrative - however, I will consider it for a future video!
Nice build, but have you thought about adding some narration? even voice over? It really helps hold viewers interest. I tend to skip most videos without sound. I did watch most of this to see the final build, but "I" found it tough to go the 10 minutes without sound. Just my opinion, your mileage may vary. Cheers.
If I make any more of these I think I will...these were largely hosted here so I could show a process to link to from my Instagram so wasn't thinking of making them as pure RUclips vids if you catch my drift. However, I've been very busy over the last year and not able to make much if any work let alone videos, so will consider maybe making some with narration when I'm back
WOW!!!! That was AWESOME!!!! This is one of the best videos on how to scratch build your own model kits, not to mention one of the coolest ways to help save the planet! 👍🏻 I look forward to seeing more of your videos! You just earned a new subscriber! 😎
The model you've made is fantastic, however I really think you would benefit from some different editing techniques and definitely your presentation of the model at the end. Some voice over on your process would really elevate the video, and giving the viewer something to really admire at the end, ideally with some good lighting and camera work, would make this video multitudes more enjoyable to watch. Let us see it for more than 5 seconds before the video ends! Do a turntable, show it off! It's incredible! We want to see it!
Thank you, I agree - I'm not much of a film maker and only recorded this as a supplement to my Instagram for those who wanted to see rather than for it to gain any interest on RUclips - however if people like I'd be happy to do more I just have so little time to make at the moment let alone film and edit! I have to get help editing as it is...
Thanks for sharing this. I’ve been following you on Instagram and it’s really cool to see your process. Makes me want to try it as well. What are the yellow panels you put on after priming it white made of?
Thank you! I'm glad you like it. The tape is coach line tape used for adding coach lines and stripes to cars. I can cut it and then peel the backing off
Fantastic to see another video on this channel again. It was also really interesting to see this build's development. I didn't realize all the parts you used. It's impressive what paint can do (and of course good story telling).
Thanks Dane. It's been a long while and I'm taking a little break from it for a few weeks so it's nice to be able to share process from a previous model
I am in awe of your "bits box"...or should we call it a bits storage room. Since you apparently have an entire room of cabinets, drawers, etc. filled with an amazing collection of bits and pieces. You sir have a greeblie collection that any scratch builder only dreams of. 🙏🙏 Aweaome build sir, would only wish to have seen more of its creation, thanks for sharing and keep on keeping on!!
A variety - spray paints from wherever, often molotow, and I get the cheapest brushes I can as I get thrown so many - packs of fine nibs from online. Apart from that it's patina paints, airbrush, acrylic and enamel for a base and oils for weathering
Quality of the work aside, im really fed up with these RUclips people who are too afraid to talk about what they are doing. Look at how awesome Studsons videos are and Luke Towan. No im not going to just sit and watch you. No subscription and a thumbs down. Get over your stage fright and join the top tier guys and gals. Speak!
Dude. 6 month old video, the algorithm has you now. Get ready for a flood of views.
Totally jealous of your massive (and well organized) collection of materials!
Right!?!
I've been working on my collection as well, One cool piece is great, but really you need like 20 of that same cool piece.
This my friend deserves more subs .
Don’t stop the videos. Fantastic build ! Could watch these all day.
Wow beautiful! Hard to believe it was a bunch of assorted junk
One technique I've learned from masking and painting walls is that when you have put on the masking tape you first paint it with the colour that is under the tape and when that is dry you paint it with the second colour. That way you get perfect lines.
So in this case, after you put on the tape, you should have painted the tape edge red, and then white.
Really cool kitbash build tho!
Interesting, not quite sure I follow - so you stopping any leakage by filling with the colour under? That would make sense!
@marcushillerstrom25, What you explain is very interesting. I'll try it when I need it. Thank you for your advice.
@@philippealain-art No problem, it’s the best way to get perfect lines.
@@dreamyox3837 Exactly! Sorry for a very late answer 😁
@@marcushillerstrom25, advice on how to improve is always welcome, especially when you want a good result. I think I'd seen this tip in a video a while back, but I couldn't quite remember how to do it.
Have been inspired lol I make models but now I will be making a model from scratch - wish me luck lol
Awesome job! For your ending shots, could you possibly make that segment a bit longer? It seemed a bit too short and didn't really do your build that much justice. (in my humble opinion)
I will. I used this as a making of video hosted here for people who came from my Instagram and had seen the final piece but I hadn't banked on it doing well independently here. I am hopefully going to make more videos in future and will do so
@@dreamyox3837 ohh cool! hope to see more soon!
I would like to give more likes but unfortunately youtube just allows 1. Great job. Masterpiece
9:33 Lol nice use of a neo zeon decal and lol you even named it after a neo zeon suit
I love the painting part 👌
In the immortal words of Mr Spock: Fascinating!
Amazing. In future videos, a longer reveal of the final model (turn table?) would be nice.
Im getting far lone sail and far changeing tide vibes from this ship
Totally cool build.
That's a really nice piece!
Wow! This is a BEAUTIFUL build! I LOVE the details! The amount of greeblies you have added really sets this apart from a lot of model builders who don't go into as much detail! Have subscribed to your channel!
This was awsome!!
Beautifull spaceship Men...!👌
Dude! That's incredible!! Great work.
I love speeder design
This video and build are awesome! I would love it if it was narrated a bit
I've had similar requests, I've only added these so my Instagram followers can see some of the process, so wasn't thinking as much about the narrative - however, I will consider it for a future video!
Simply brilliant!
Nice build, but have you thought about adding some narration? even voice over? It really helps hold viewers interest. I tend to skip most videos without sound. I did watch most of this to see the final build, but "I" found it tough to go the 10 minutes without sound. Just my opinion, your mileage may vary. Cheers.
If I make any more of these I think I will...these were largely hosted here so I could show a process to link to from my Instagram so wasn't thinking of making them as pure RUclips vids if you catch my drift. However, I've been very busy over the last year and not able to make much if any work let alone videos, so will consider maybe making some with narration when I'm back
oh wow great Job!!!
I just found your channel and I must say your creations are outstanding! well done!
Thank you! Lovely to be part of the trashbashing community
Amazing!
I think I've just found a new rabbet hole to get lost in. This is excellent.
Brilliant video! Fantastic idea, the shapes are already there for you to build upon! Love it!
Turned out nice! Looks good
You even have more old patterns in your drawers than I do :)
WOW this would drive my OCD up the wall.
Greetings from Sweden 🇸🇪.
Thank you for your inspirational videos 👍
I just want to know how long it took to collect such a wide range of awesome gubbins (random materials)
amazing! good TEQNICAL
Beautiful model! 😍
Gunna binge the rest of these later
WOW!!!! That was AWESOME!!!! This is one of the best videos on how to scratch build your own model kits, not to mention one of the coolest ways to help save the planet! 👍🏻 I look forward to seeing more of your videos! You just earned a new subscriber! 😎
This looks insanely awesome
Oh my god what a workshop
☝🏽😂 LOOKS TOTALLY AWESOME!!!👍🏽 I CALL THAT THE STAR WARS LOOK 🤔 OR STEAMPUNK-ISH 🤔 SYFY IS A GENERAL TERM 😂
one of the best trash bashing that i have ever seen :D
Gorgeous work!!
Reminds me of the airships from the anime last exile!
Sweet paint job too
Thank You for share this work with us! I learned a lot from this proyect.
New subscriber mate, really nice work 😉👌
wow excelente video.
Amazing! Show us moarrrrr :)
WoW Nice!!!
Nice🔥🔥🔥🔥
Subscribed
Make these longer dont be shy.
You are awesome man!!!
A dreamyOx video : O
And my brain was like NAAAW ARE YOU SURE?
And Im like IM TELLING YOU ITS A VIDEO ><
And my brain is like NAAAAAW :>
Good build up. It works fine as a submarine for me as well.
Fantastic modelling , very intricate and detailed 👌 👏 👍
So cool
The model you've made is fantastic, however I really think you would benefit from some different editing techniques and definitely your presentation of the model at the end. Some voice over on your process would really elevate the video, and giving the viewer something to really admire at the end, ideally with some good lighting and camera work, would make this video multitudes more enjoyable to watch. Let us see it for more than 5 seconds before the video ends! Do a turntable, show it off! It's incredible! We want to see it!
Thank you, I agree - I'm not much of a film maker and only recorded this as a supplement to my Instagram for those who wanted to see rather than for it to gain any interest on RUclips - however if people like I'd be happy to do more I just have so little time to make at the moment let alone film and edit! I have to get help editing as it is...
@@dreamyox3837 Need a good plot
Thanks for sharing this. I’ve been following you on Instagram and it’s really cool to see your process. Makes me want to try it as well. What are the yellow panels you put on after priming it white made of?
Thank you! I'm glad you like it. The tape is coach line tape used for adding coach lines and stripes to cars. I can cut it and then peel the backing off
This is excellent work. Well done!
Awesome!
Amazing! Subbed
Fantastic to see another video on this channel again. It was also really interesting to see this build's development. I didn't realize all the parts you used. It's impressive what paint can do (and of course good story telling).
Thanks Dane. It's been a long while and I'm taking a little break from it for a few weeks so it's nice to be able to share process from a previous model
A Steampunk submarine....🥰
Amazing project , my friend !🏅🏆👏🏻👏🏻👏🏻🤝🏻👍🏻🎩👌🏻
I think the most difficult part of the build is finding 2 of each piece to make it match symmetrically,
When you have so much stuff and junk in the studio it's the joy of it - it becomes a collage that tells you what it wants to be as you make it
Love your stuff at Small is Beautiful today - Your bits box must be epic!
Thank you! Very glad you enjoyed. My studio is absolutely crammed! Maybe I should do a tour
I am in awe of your "bits box"...or should we call it a bits storage room. Since you apparently have an entire room of cabinets, drawers, etc. filled with an amazing collection of bits and pieces. You sir have a greeblie collection that any scratch builder only dreams of. 🙏🙏
Aweaome build sir, would only wish to have seen more of its creation, thanks for sharing and keep on keeping on!!
Do you ever make your own Sculpting Tools
Thanks for posting this. Ive been in awe of your work on Instagram for years! 👍🏻
Ever use Milliput or something like that
Have you ever used a ultrasonic knife for cutting the plastic parts ? I have been told it is like cutting butter, but I have not used one myself yet.
No, I have to admit I've never heard of it! I generally use scalpel or saw or band saw and then sand edges
@@dreamyox3837 Lots of youtube videos on ultrasonic knifes, they look like a fantastic tool to have.
I am really Impress
👌👌👌
Great build What Brand of paint and Brushes you use
A variety - spray paints from wherever, often molotow, and I get the cheapest brushes I can as I get thrown so many - packs of fine nibs from online. Apart from that it's patina paints, airbrush, acrylic and enamel for a base and oils for weathering
honestly, the ship looked kinda good before the paint
The primer stage is always when it really starts to come to life!
What Brand of paint and Brushes you use
the video says land speeder but i think its a sub the entire time
How many times has your Sigg, Othh (significant other) asked you why don`t you ever throw anything away?
What specific glue for all the various materials
I mainly use everbuild super glue and for anything that doesn't want to stick I use two part epoxy like gorilla glue. Some plastic weld
I have junk drawer envy....
I have too many! Am moving to a new space and need all the junk drawers
I've got no end of crap in my cupboards you could probably make a full scale replica with.
I'd love to see it! My studio is overflowing
tuff
Fantastic build. It could also double as a deep sea submersible
its a submarine and u are not even trying to hide it
I think it's probably #YT_maker_secret_santa that has caught you up in its wake.
Thank you! What is this? I don't follow RUclips much and only upload as a place for my Instagram followers to find longer form videos
@@dreamyox3837 check the tag brother. Lots of main makers get together and have fun.
😁🤟
Ksatria ... its mean a warrior/knight, in my indonesia language
Sieg Zeon! subbed
Ksatria = Hero in indonesian languange
Quality of the work aside, im really fed up with these RUclips people who are too afraid to talk about what they are doing. Look at how awesome Studsons videos are and Luke Towan. No im not going to just sit and watch you. No subscription and a thumbs down. Get over your stage fright and join the top tier guys and gals. Speak!
It must be f*cking tiring being this entitled.
Excelente, mucha imaginacion.
Very cool!