I've worked around a lot of good utility operators and this man is good. Not everyone can dig around every obstacle known to man and never hit a thing all while being consistent yet precise and careful
Awesome video I know if I was digging around utilities like that I would like to have a pin grabber coupler so you can spin the bucket backwards for around pipes etc
Interesting choice of teeth on the bucket. Here they would be used for digging frost or hard pan. For water and sewer I used wide paddle teeth pin on bucket forget about the smoothedge.
I was lead hoe, water and sewer for 7 years in Red Deer with my share of main replacement. Always used a 400, a 374 Cat seems huge! Lol almost twice the size ... How deep were you going, sani or storm?
For the west side Vancouver this doesn’t look like that bad of a dig other than the traffic.... Seems nice actually. At least they don’t have that spiderweb of overhead trolly lines, hydro and tel that you get further in..... plus wood box water that’s still active and seemingly 2 of every service to every house. Digging in Vancouver is so fun!!!!
@@bdhall_ca I know it’s not west van. Main is E/W dividing line so Cambie still counts as the west side does it not? All I saw was Cambie so I just guessed at area. I was just saying that for an area notorious for unaccounted for, aging infrastructure that that section of excavation seems nice.
Well when the operator cant see, it's a team effort , a good ' Top Man '' will guide him . Team work. I layed pipe for 18yrs, the deepest I every was with sanitary sewer was 45ft... The top 20' or so was benched out then used 2 - 10ft tall ×18ft long with a 4ft stacker on top ditch boxes.
@@Irven51 , I understand that. But I do miss the sounds comi g from the older 200 series . Each one had a sound of its own which was music to my ears compared to how all today's machines sound like sewing machines to me. (Really)
Not only for the depth of the dig, but the weight to reach out and pull the ditch boxes out once dirt caves in on them. Even with no cave ins reaching way out and lifting heavy boxes out of a hole is not for a small machine.
Impressive takes nerves of steel and a steady hand to dig that deep through utilities in the middle of the street .
I've worked around a lot of good utility operators and this man is good. Not everyone can dig around every obstacle known to man and never hit a thing all while being consistent yet precise and careful
The real good ones are the ones that feel a obstacle an stop that isnt known an dont damage it
Your not feeling anything with cat 374 unless it’s some RCP pipe
Awesome video I know if I was digging around utilities like that I would like to have a pin grabber coupler so you can spin the bucket backwards for around pipes etc
Big shout out to Rob P here on the 374.
That's a good operator. Very smooth on the controls. I really like the intros you put on the front of your videos!
Nicely done. I usually tear the sideboards off every truck. Then Rip through all the conduits in the ground lol
Pease post more of this jobsite and operators!!!
I'm also interested into their backfill process.
Good video of digging.
AWESOME VIDEO. Would love to see more utility road work videos
Good job😮😮🎉🎉
Nicely done. Really good video with interesting perspectives 👍🏼👍🏼
Interesting choice of teeth on the bucket. Here they would be used for digging frost or hard pan. For water and sewer I used wide paddle teeth pin on bucket forget about the smoothedge.
might just be a run what's on it situation too
Tiger teeth!! I agree paddles are best for this work
Awesome video!!
Awesome footage
GOOD MACHINE
What make is that quick hitch ?
I was lead hoe, water and sewer for 7 years in Red Deer with my share of main replacement. Always used a 400, a 374 Cat seems huge! Lol almost twice the size ... How deep were you going, sani or storm?
I WAS ALSO THE LEAD HOE AT MY FRATERNITY.......BUT I NEVER SAT UPRIGHT FOR MY JOB......SAW LOTS OF BIG DIPPERS THOUGH😀
For the west side Vancouver this doesn’t look like that bad of a dig other than the traffic.... Seems nice actually. At least they don’t have that spiderweb of overhead trolly lines, hydro and tel that you get further in..... plus wood box water that’s still active and seemingly 2 of every service to every house. Digging in Vancouver is so fun!!!!
Part 2 will be interesting
This is south Vancouver. Not west van.
@@bdhall_ca I know it’s not west van. Main is E/W dividing line so Cambie still counts as the west side does it not? All I saw was Cambie so I just guessed at area. I was just saying that for an area notorious for unaccounted for, aging infrastructure that that section of excavation seems nice.
Geiles video 👍
Well when the operator cant see, it's a team effort , a good ' Top Man '' will guide him . Team work. I layed pipe for 18yrs, the deepest I every was with sanitary sewer was 45ft... The top 20' or so was benched out then used 2 - 10ft tall ×18ft long with a 4ft stacker on top ditch boxes.
Back in the day when the king of excavators was a 245 , a real work horse with real hydraulics..
What HP ???
Oi is all this done on full revs or u turn it down when ur trying to becareful ??
That machine sounds like it's running half throttle. I don't like that myself.
The newer Cats sound like that. They are super quiet. The guys in the ground level love it.
@@Irven51 , I understand that. But I do miss the sounds comi g from the older 200 series . Each one had a sound of its own which was music to my ears compared to how all today's machines sound like sewing machines to me. (Really)
I see I'm not the only one who takes the travel levers off.
The efficiency just isnt there the forward planning is terrible
Why does it take such a big machine??
Not only for the depth of the dig, but the weight to reach out and pull the ditch boxes out once dirt caves in on them. Even with no cave ins reaching way out and lifting heavy boxes out of a hole is not for a small machine.
🇩🇿❤🇺🇲💪