I'm buying an RP1 with a separate performance pack. It would be really, really nice if Rega provided a photo or esp. video of upgrading the Turntable. Or at least show us the pieces that come with the the pack.
I've currently got a (very) cheap turntable with built in speakers and I'm looking to upgrade and this has definitely caught my eye. My only question is do I just need a pre amp and set of speakers to get this working well? I was thinking of purchasing a set of audioengine a2+ so would they work with just a separate pre amp? Apologies if this is somewhat of a simple question but this is my first time looking into the higher end of turntables and I'm unsure of what other parts are needed
pre amps only work in conjunction with power amps...some true preamps have a phono input, in that case, you just hook this up to the phono section. if your preamp does not have a phono input than you need to buy a separate preamp to hook into and that will feed into the true preamplifier, or a receiver. a preamp doesn't hook up speakers. in the simplest terms..ur system either has a receiver (power amp, preamp and tuner built into one), separate components of power amp and preamp/tuner or separate preamp separate tuner. speakers hook up to the power amp, or receiver. now, if you receiver or preamp do NOT have an input for phono, than you need to purchase an external preamp for the turntable, and than that can feed into any input on the receiver or preamp. finally, some turntables have built in preamps and in that case, you just hook up into into any input
I have a Rega RP1, Audioengine A2+ speakers, and use a Music Hall mini-amp ($90). Together they sound and work fabulously. I'm no audiophile, and of course agree that there are upgrades that can be made to the RP1 to make it even better than it already is. I will upgrading the cartridge to a Sumiko Pearl ($120). Hope this helps!
my question is, if the counter weight is preset for this cartridge, does that mean you cannot buy a different cartridge if you can't adjust the counter weight???? that alone may influence my decision on this table
+TheNewGranada I assume you've already made your decision, but for others. Yes you can use a different cartridge. Rega's own range of higher end MM cartridges require the counterweight to be moved back about the thickness of a credit card. For other cartridges, you'll need a tracking force gauge.
A Shure counter balance down force gauge to set the vertical tracking force for any cartridge. You can buy a plate from Rega for the Vertical Height adjustment, but some good quality nylon washers of different thickness work as well at a small percentage of the cost of the plate. Since I have rebuilt my RP1 from the ground up with an Audio Technica AT150MLX cartridge (best MM cart for the money), with a new stainless steel subplatter, ruby bearing, new RCA cable with gold plated connectors, 32 gauge tonearm wires (with excellent clips), I can say the RP1 can be modified to be as good as any turntable. The 23.6 mm acrylic platter was the best addition. I highly recommend the RP1 for an excellent arm, buildable replacement parts, and the ability to play most any cartridge. Don't buy it and expect it to work to its best without upgrades. The motor is an AC type that doesn't need a wall wart and if you find it isn't accurate enough for you, there are aftermarket speed controls that work well (not available for DC motors).
+Anti Hero1766 The audio technica at-lp60 (99 $) is good for starting in lp records or if you want a more cheaper i will say a Jensen turntable (60$ and up) but don't buy a crosley
Since I've already gone through the terrible experience of owning one. The RP1 has maybe the worst wiring and clips that's every been used. I modified the rubber plug that was on the arm pipe to build new rca cables first, and then soldered 32 gauge tonearm wire, make sure you order 28", because you will waist too much for that junk that's exact length. The other important requirement is to buy fiber washer just large enjoy for the top mounting screw, and I used two washer super glued together. This raises the arm enough for a quality cart, otherwise you arm will not be level (actually going up) from the arm base swivel. It horridly affects the sound if you don't. If you want to be a purist, then buy the plate that Rega sells that does the same thing for the appropriate dollars. You will need a VTF (vertical tracking force gauge) electronic or the reliable $20 Shure gauge. After doing this, the turntable is ready to be used for any cartridge. It that's too much for you to handle, buy a cable, cardas, tonearm wire that is ready to be plugged in. Make sure you use the bracket to hold rca cables in place or you could damage the new cardas. If you don't desire to be faced with these problems, buy a turntable with the removal headshell so you never have these problems, and highly recommend the Thorens 190-2 which just happens to be automatic (which doesn't hurt the quality of sound). What you get is a professional arm, excellent plinth and accurate motor. For $750, it is probably the best quality turntable under $1000. My new one uses the Ortofon Blue, and for $1000 combined, there isn't anything better and I don't make statement I can't back.
Frankly , this turntable model is not as good as presented on the web . Cheap tonearm cables and poor wiring , lack of grounding cable cable generates a lot of noise and the slipmat is the worse I've ever seen . Frankly the signal cables are the worst kind you can find , upgrade them as soon as possible . However considering the cartridge and tonearm at this price point is a fine machine . Of course various upgrades are possible on this and they will improve the sound quality , but still for this kind of money a better vintage turntable can be purchased including the service cost .
This is not a bad turntable but is has its flaws. First of all, get rid of the Audio Technica ATH3600L that Rega calls the Rega Carbon. It is good for general listening but not up to its task if you have serious listening in mind. And you have or you wouldn't have this turntable on your shopping list! Remember that the weakest link in the chain will be the limiting factor as for sound quality and overall performance. Than there is the humming problem that most Rega turntables seem to suffer from. The level of this humming is way under the rumble level of the worst possible record so one can live with it but is IS a quality issue here. The dust cover can only be opened in one position, all the way until bertically positioned, it will act as a resonator if left open during play. And given the poor isolation from acoustic feedback this turntable suffers from it is absolutely a must either to remove the lid or close it during play. And this wraps up all the flaws of the Rega RP1 and most of its more expensive brothers. Other than that, it gives surprisingly good reproduction IF the terrible ATH3600L in Rega Carbon disguise is replaced for something way better.
@@deckofcards87 Ortofon 2M Blue For spritely sound, or Nagaoka MP-110 for warm vinyl sound. Some say the MP-110 sounds better and it costs much less, but I like the energy and sound-stage of the 2M Blue... Both carts worthy of this turntable's potential. Although Rega has a replacement table out now simply called the 'P1' - You should consider this one. It's got an upgraded tonearm and other improved features. It's better. I just bought one and it's utterly fantastic. - Seriously an upgrade from any entry level turntable and considered to sound as good as some tables costing $1,000, but you need the cartridge to hear it.
@@rlwings I just received the p1 for xmas. I'm guessing the cartridge is the same as before and not that great? Also u seem pretty knowledgable, should I buy a separate phono preamp or use my avr phono stage that's built in?
@@Badazz08 Sorry for the late reply, lol, never got the notification... Anyway, I have since swapped my Ortofon 2M Blue cart for the Nagaoka MP-110 and the results are incredible.... And yes, I would definitely get an external preamp. I did. Might I suggest the highly regarded Schmiit Mani. Together with the P1and Mp-110 you will have the holy trio of phono gear that punches waaaay beyond their price-points. :)
Love this turntable...especially with the performance pack
Is there a 45rpm mode?
@@kazye11 yes
I'm buying an RP1 with a separate performance pack. It would be really, really nice if Rega provided a photo or esp. video of upgrading the Turntable. Or at least show us the pieces that come with the the pack.
I've currently got a (very) cheap turntable with built in speakers and I'm looking to upgrade and this has definitely caught my eye. My only question is do I just need a pre amp and set of speakers to get this working well? I was thinking of purchasing a set of audioengine a2+ so would they work with just a separate pre amp? Apologies if this is somewhat of a simple question but this is my first time looking into the higher end of turntables and I'm unsure of what other parts are needed
Yes you will need a separate Pre-amp, there is a few decent ones an amazon for ~$50 USD.
pre amps only work in conjunction with power amps...some true preamps have a phono input, in that case, you just hook this up to the phono section. if your preamp does not have a phono input than you need to buy a separate preamp to hook into and that will feed into the true preamplifier, or a receiver. a preamp doesn't hook up speakers. in the simplest terms..ur system either has a receiver (power amp, preamp and tuner built into one), separate components of power amp and preamp/tuner or separate preamp separate tuner. speakers hook up to the power amp, or receiver. now, if you receiver or preamp do NOT have an input for phono, than you need to purchase an external preamp for the turntable, and than that can feed into any input on the receiver or preamp. finally, some turntables have built in preamps and in that case, you just hook up into into any input
Jake Gray Just look for an integrated amp with mm phono stage included
I have a Rega RP1, Audioengine A2+ speakers, and use a Music Hall mini-amp ($90). Together they sound and work fabulously. I'm no audiophile, and of course agree that there are upgrades that can be made to the RP1 to make it even better than it already is. I will upgrading the cartridge to a Sumiko Pearl ($120). Hope this helps!
Oh wow, what's the song in the background? Smooth as fuck.
my question is, if the counter weight is preset for this cartridge, does that mean you cannot buy a different cartridge if you can't adjust the counter weight???? that alone may influence my decision on this table
I believe there are instructions in the manual for adjusting for use with a replacement cartridge.
+TheNewGranada I assume you've already made your decision, but for others. Yes you can use a different cartridge. Rega's own range of higher end MM cartridges require the counterweight to be moved back about the thickness of a credit card. For other cartridges, you'll need a tracking force gauge.
A Shure counter balance down force gauge to set the vertical tracking force for any cartridge. You can buy a plate from Rega for the Vertical Height adjustment, but some good quality nylon washers of different thickness work as well at a small percentage of the cost of the plate. Since I have rebuilt my RP1 from the ground up with an Audio Technica AT150MLX cartridge (best MM cart for the money), with a new stainless steel subplatter, ruby bearing, new RCA cable with gold plated connectors, 32 gauge tonearm wires (with excellent clips), I can say the RP1 can be modified to be as good as any turntable. The 23.6 mm acrylic platter was the best addition. I highly recommend the RP1 for an excellent arm, buildable replacement parts, and the ability to play most any cartridge. Don't buy it and expect it to work to its best without upgrades. The motor is an AC type that doesn't need a wall wart and if you find it isn't accurate enough for you, there are aftermarket speed controls that work well (not available for DC motors).
Does this one have built in Riia?
Hi anyone can tell me where i can get a dust cover
Where is the 45rpm mode?
Anyone have any idea of where the music's from in the background? Dope Stuff.
I would like to buy a record player but not a too expensive one.
Can you guys give me some info on good but not too expesive record players?
+Anti Hero1766 The audio technica at-lp60 (99 $) is good for starting in lp records or if you want a more cheaper i will say a Jensen turntable (60$ and up) but don't buy a crosley
+Gustavo Salinas I wouldn't bother with any of them. The minimum should be the AT-LP120. The Jensen is a Crosley with a different badge.
thanks guys
You forgot to show bias adjustment.
Don't you need to set the tracking force on the bias slider?
+James Stephens No it is preset for the cartridge.
Since I've already gone through the terrible experience of owning one. The RP1 has maybe the worst wiring and clips that's every been used. I modified the rubber plug that was on the arm pipe to build new rca cables first, and then soldered 32 gauge tonearm wire, make sure you order 28", because you will waist too much for that junk that's exact length. The other important requirement is to buy fiber washer just large enjoy for the top mounting screw, and I used two washer super glued together. This raises the arm enough for a quality cart, otherwise you arm will not be level (actually going up) from the arm base swivel. It horridly affects the sound if you don't. If you want to be a purist, then buy the plate that Rega sells that does the same thing for the appropriate dollars. You will need a VTF (vertical tracking force gauge) electronic or the reliable $20 Shure gauge. After doing this, the turntable is ready to be used for any cartridge. It that's too much for you to handle, buy a cable, cardas, tonearm wire that is ready to be plugged in. Make sure you use the bracket to hold rca cables in place or you could damage the new cardas. If you don't desire to be faced with these problems, buy a turntable with the removal headshell so you never have these problems, and highly recommend the Thorens 190-2 which just happens to be automatic (which doesn't hurt the quality of sound). What you get is a professional arm, excellent plinth and accurate motor. For $750, it is probably the best quality turntable under $1000. My new one uses the Ortofon Blue, and for $1000 combined, there isn't anything better and I don't make statement I can't back.
Frankly , this turntable model is not as good as presented on the web . Cheap tonearm cables and poor wiring , lack of grounding cable cable generates a lot of noise and the slipmat is the worse I've ever seen . Frankly the signal cables are the worst kind you can find , upgrade them as soon as possible . However considering the cartridge and tonearm at this price point is a fine machine . Of course various upgrades are possible on this and they will improve the sound quality , but still for this kind of money a better vintage turntable can be purchased including the service cost .
Which vintage turntables would u recommend as alternatives.
This is not a bad turntable but is has its flaws. First of all, get rid of the Audio Technica ATH3600L that Rega calls the Rega Carbon. It is good for general listening but not up to its task if you have serious listening in mind. And you have or you wouldn't have this turntable on your shopping list! Remember that the weakest link in the chain will be the limiting factor as for sound quality and overall performance. Than there is the humming problem that most Rega turntables seem to suffer from. The level of this humming is way under the rumble level of the worst possible record so one can live with it but is IS a quality issue here. The dust cover can only be opened in one position, all the way until bertically positioned, it will act as a resonator if left open during play. And given the poor isolation from acoustic feedback this turntable suffers from it is absolutely a must either to remove the lid or close it during play. And this wraps up all the flaws of the Rega RP1 and most of its more expensive brothers. Other than that, it gives surprisingly good reproduction IF the terrible ATH3600L in Rega Carbon disguise is replaced for something way better.
Can you recommend a better replacement cartridge??
@@deckofcards87 Ortofon 2M Blue For spritely sound, or Nagaoka MP-110 for warm vinyl sound. Some say the MP-110 sounds better and it costs much less, but I like the energy and sound-stage of the 2M Blue... Both carts worthy of this turntable's potential. Although Rega has a replacement table out now simply called the 'P1' - You should consider this one. It's got an upgraded tonearm and other improved features. It's better. I just bought one and it's utterly fantastic. - Seriously an upgrade from any entry level turntable and considered to sound as good as some tables costing $1,000, but you need the cartridge to hear it.
@@rlwings I just received the p1 for xmas. I'm guessing the cartridge is the same as before and not that great? Also u seem pretty knowledgable, should I buy a separate phono preamp or use my avr phono stage that's built in?
@@Badazz08 Sorry for the late reply, lol, never got the notification... Anyway, I have since swapped my Ortofon 2M Blue cart for the Nagaoka MP-110 and the results are incredible.... And yes, I would definitely get an external preamp. I did. Might I suggest the highly regarded Schmiit Mani. Together with the P1and Mp-110 you will have the holy trio of phono gear that punches waaaay beyond their price-points. :)