How to Ozonate Water - Simply O3 Water Bubbler System
HTML-код
- Опубликовано: 21 сен 2023
- Here is a video describing how to ozonate water.
1. Hook up your machine and oxygen source
2. Hook up your water bubbler machine and fill with water
4. Set oxygen to 7
5. Turn ozone machine on
6. Ozonate water for 12 minutes per 8 ounces
7. Turn off machine, oxygen, and disconnect bubbler
For a full guide, go to www.simplyo3.com/guide
I would like to see more “how to videos”. These on making water are good but we need one for setting up cupping, etc. Also a video explaining the various stop valves and how they are used. I have several of the stop valves but I am unsure which direction the ozone is flowing through them, so I’m not sure how to add them to my setup.
Where it is the video of the olive oil treatment I need to do a respiratory video
Thank you for this product and the tutorial videos.
I’m wondering, can this video apply directly to making ozonated oil as well? If not, what are some of the differences that I might need to know of for making oil?
Thanks. What happen to all the other simply 03 instructional videos?
If ozone in water/oil only lasts for a short amount of time, does buying ozonated water/oil make no sense? How can we know if there’s even any ozone in the products
Ozonated water lasts a short time. When ozone gas is infused into an oil it stabilizes as a peroxide. The shelf life of the oil depends on the manufacturing process, strength, and quality of oil.
Our ozonated oils undergo third party testing to identify the peroxide value.
For ozone water, there are ozone analyzers that can measure the amount of ozone gas in the water, like we have here at our facilities. However, these are kind of expensive. Ozone has a distinct smell, so it is particularly noticeable if it is present in water.
I have the fractionated regulator. Shall I set it to 1/4? Or does it not matter?
What machine do you have?
How fast you have to drink your water?!
My oxygen regulator does not go up to 7. I don't there is any O2 regulator that goes up that high
All the regulators on our 3.0 system have "settings" 1 - 11. These are not the same as LPM. They all have a flow rate of 1LPM or lower.
How about ozonating oil 😢
This company is amazing, however the stem keeps braking . So when do you turn the oxygen tank on?
They've sent me three replacements for free, however I got an email that they won't be replacing them for me any longer. The stem breaks easily, just removing it from the bottle broke it twice. So Im not sure why they are not getting a better product for this. The replacement is very expensive.
Our new bubbler is almost ready! It won't have a stem. Rather the base has a fine pore diffusion built into it. It's also all removable and cleanable. It takes time to get these things designed and made.
@@simplyo3 I just called and they told me it won't be ready till the end of the year but that is good news. Im using a broken one now, on of the top connectors broke as I was pulling it out, it is very fragile, but the last time I email I was told that you won't replace it any longer for me.
@@normaland What's your email? I'll send another one
@@simplyo3 Did u get my email? I posted it twice but is not there
@@normaland Hi Norma, I did not. I think RUclips might not allow. Feel free to email me at micah at simply o3 dot com.