thank you so much sir i appreciate you i searched more time but i cant understand the whole cup die but randomly i see your video and i totally understand the whole cup die thank you so much again....
I would like to know how to say "thank you very much" in all languages to try to express all my gratitude for your attention and teaching in this wonderful tutorial!
You 've got the difficult ability to have low and stable voice and direct and compact way to transfer from your brain to the tongue all the necessary information for this construction. Thank you
Superb tutorial, explained clearly and professionally, so thanks! One part that nearly caused me problems was the angle along the edge, as mine was showing as 77.7 (which I thought couldn't be correct) - but the angle that I needed was the difference (12.3). Just in case anyone else hits this problem!
You know Sir with your tutorial you help me so a lot.Thank you very much for sharing this.I have a question. After placing design on this maket on what size artboard must be?or maybe no matter the size??
NIce and helpful video. Is it possible to show me how to add some coffee(only a little portion on top of the cup inside is visible) in a solid(not transparent) coffee mug picture? Thanks
I've already tried to find the angle of the circular sector using plane geometry, but calculating radians and angles is not for me. Thanks friend and sorry for the translation.
you can use google to search as an example search for ( 10oz paper cup dimension ) and you can find sites selling or printing paper cup and in these sites you can find the exact dimension needed such as the link below luckypack.en.made-in-china.com/product/FdVTeHwuGSck/China-China-Supplier-Disposable-Paper-Coffee-Cups-4oz-8oz-10oz-12oz-16oz-20oz-with-Custom-Printed.html This is another site www.thepapercupcompany.com/html/cup_dimensions.html
Why this long method?? When we can easily trace or draw with the help of pen tool... don't get me wrong 😅 just want to know the logic behind this long process 🙂
Hi You want to trace or draw what??? The reference photo from where??? This is diecut which means mass production , Engineering and any error will cost you a lot of mony.
@@RaniBrStudio thanks for the reply.. I am learning Adobe Illustrator and most of the videos I saw showed pen tools and tracing after this I saw your video so I was m confused with my question 😥 this process is a little bit complex compared to the pen tool method.
Why its not working???? If you have a ready made cup just unfold it, scan, and draw above it to get the same die cut in this video i explain the mathematical method to draw paper cup but if you already have machine use the template that come with it because it will defer from one machine to other
You're a great instructor, and this is a testimony from a fellow instructor, keep creating!
I appreciate that!
Just 1 word Awesome, I serached whole internet to find the way but there is nothing like this video who tell in simple and profesional way
Gracias !
Thanks and welcome
You explained a complex design in a very simple way to understand. You are genius. Thanks for making this video.
Thanks for watching! I'm thrilled you found the explanation easy to grasp.
@@RaniBrStudio I have subscribed your channel.
OMG THANK YOU SO MUCH!!! This helps me a lot. i will not skip the ads
Glad it helped!
Thanks!
Thanks
thank you so much sir i appreciate you i searched more time but i cant understand the whole cup die but randomly i see your video and i totally understand the whole cup die thank you so much again....
Thanks and welcome, glad it helped
I would like to know how to say "thank you very much" in all languages to try to express all my gratitude for your attention and teaching in this wonderful tutorial!
You're very welcome!
So nice of you.
such a genius.. thank you so much
You're very welcome!
You 've got the difficult ability to have low and stable voice and direct and compact way to transfer from your brain to the tongue all the necessary information for this construction. Thank you
Wow, thank you!
This tutorial really helped me! Thank you very much for your work!
Glad it helped!
Superb tutorial, explained clearly and professionally, so thanks!
One part that nearly caused me problems was the angle along the edge, as mine was showing as 77.7 (which I thought couldn't be correct) - but the angle that I needed was the difference (12.3). Just in case anyone else hits this problem!
You are welcome, Glad it helped!
You know Sir with your tutorial you help me so a lot.Thank you very much for sharing this.I have a question. After placing design on this maket on what size artboard must be?or maybe no matter the size??
I'm Glad to hear that , art board size is not important but usually make it larger than the design itself.
@@RaniBrStudio I got it,thanks ☺️
this was the most helpful video ever, thank you, very well explained also
You r welcome
You are amazing! Thank you so much! This was super easy to follow!
You're so welcome!
i think u just saved my life! Thanks man
You are welcome!
mrhban, laqad kunt 'ushahid maqatie alfidyu alkhasat bik watarakat 'iejaban, ean jadaratin! yajib 'an tahtawi qanat mithl Shu ealaa eadad kabir min almushtarikin bialfiela! bisabab almuhtawaa!!
You can write in English
Thank you so much for this tutorial!!! Extremely helpful
Glad it was helpful!
NIce and helpful video. Is it possible to show me how to add some coffee(only a little portion on top of the cup inside is visible) in a solid(not transparent) coffee mug picture? Thanks
Yes I can, soon
thankss it helped so much
Glad it helped!
You are a life saver
You are so welcome!
Will these same principles work for middle eastern plastic yoghurt containers? The ones with a lid and a handle? They also curve at the bottom
it should work, try one size, print and cut then see if it works for you
amazing! thank you so much! i really need this for my work ^^
You're welcome 😊
THANK YOU SIR! WONDERFUL WORK THANK YOU
You are very welcome
thank you sir....amazing part form learning, thank you very much
Welcome
great! more than anything I can expect
Thanks
Thanks A Lot This Helped me a lot
Glad it helped
Thank you so much, your video was very helpful to me!!
Glad it helped
5:43 why Change value to 23.9? What if I’m designing for another size of cup?
This value is for this design, for other sizes change bend until fit to the edge
Muchas gracias por el tutorial, me ayudó bastante. Saludos desde México!
Muchas gracias. Saludos desde Jordania!
thank you brother your video is helpful for us
You are most welcome
Great tutorial, thanks a lot, sir
You are most welcome
I've already tried to find the angle of the circular sector using plane geometry, but calculating radians and angles is not for me. Thanks friend and sorry for the translation.
You are welcom, It's very easy to be learned just try it once and you will find it easy to be reapply for any size
I love this. but I have a question. In case I've already designed a label in Photoshop, can I import it into illustrator and warp?. will it work?
Thanks for your comment, Yes you can place Photoshop design or any image in Illustrator and apply warp on it.
thank you so much! it helped me a lot.
Glad it helped!
THNAK YOU SO MUCH SIR...
Welcome
Thank you very much. i is great video
You are welcome!
Thanks a lot!
You're welcome 😊
This was really helpful thank you so much and it was much easier to find. I once saw your old channel hybrid software am I correct?
You are welcome,
I don't have any other channel on RUclips
عجيب عجيب عجيب
???
هذا المطلوب الف شكر
هل هذا الفيديو مشروح بالغربي
العفو
غير مشروح باللغة العربية
قريبا ان شاء الله يتم التحديث للغة العربية
The video was great, thank you
Glad you enjoyed it!
شكرا الك فيديو كلش مفيد
العفو
فية مشكلة مقاس الزاوية في الدقيقة4 ما يطلع نفس مقاسك يعطني 68.51 ايش الحل لها ؟
لازم يطلع نفس الزاوية
القيمة اللي طالعة عندك متممة الزاوية يعني دوران بالعكس او مستخدم الجهه اليمين من التصميم
@@RaniBrStudio زبط معي الان في مشكلة في عمل خطوط السنتر الخط الي في المنتصف تمام بس الي في اليسار و اليمين يطلع شوي داخل لجوا مع انه االزاوية صحيحة ؟
Excellent.
Thanks
How to make a paper cup cover in Photoshop
Hello
If you can repeat the same steps used in the video with Photoshop then use it instead of illustrator
Thank you so much sir
Welcome
thanks so much
You r welcome
I cannot work out an 'Anchor' degree as my Illustrator differs from yours. :( I could not work out how it appeared.
Which version of Adobe illustrator you use
28.5
try to change your workspace to Essentials classic then try again
What's your canvas size?
I don't have a specific size
I'm showing how you can draw the dieline for any size
Hi there, thanks so much for the video! When I try and print it out the dimensions seem to be all wrong, is there a way to fix that?
You r welcome .
Check the printer sittings and try to print with another printer
I have a question, How can you know how to calculate if you have different size such as 16oz, 10oz
you can use google to search as an example search for ( 10oz paper cup dimension )
and you can find sites selling or printing paper cup and in these sites you can find the exact dimension needed such as the link below
luckypack.en.made-in-china.com/product/FdVTeHwuGSck/China-China-Supplier-Disposable-Paper-Coffee-Cups-4oz-8oz-10oz-12oz-16oz-20oz-with-Custom-Printed.html
This is another site
www.thepapercupcompany.com/html/cup_dimensions.html
man you are a genus
Thanks
Excelente explicacion ! Gracias !
Welcome
nice
Thanks
Why this long method?? When we can easily trace or draw with the help of pen tool... don't get me wrong 😅 just want to know the logic behind this long process 🙂
Hi
You want to trace or draw what??? The reference photo from where???
This is diecut which means mass production , Engineering and any error will cost you a lot of mony.
@@RaniBrStudio thanks for the reply.. I am learning Adobe Illustrator and most of the videos I saw showed pen tools and tracing after this I saw your video so I was m confused with my question 😥 this process is a little bit complex compared to the pen tool method.
I agree with you, this method looks complicated but when you understand the steps, it will be very easy to handle it.
@@RaniBrStudio ok thanks to make it clear ..i will ask in future if i will need help to understand this 🙂
You r welcome
شكراااااااا
العفو
مرحبًا، لقد كنت أشاهد مقاطع الفيديو الخاصة بك وتركت إعجابًا، عن جدارة! يجب أن تحتوي قناة مثل Shu على عدد كبير من المشتركين بالفعل! بسبب المحتوى!!
Thanks
❤❤❤🎉🎉🎉🎉🎉
Thanks
It is not working :(
Why its not working????
If you have a ready made cup just unfold it, scan, and draw above it to get the same die cut
in this video i explain the mathematical method to draw paper cup but if you already have machine use the template that come with it because it will defer from one machine to other
@@RaniBrStudio I had to cut the cup and measure it. Your mathematical method didn't work for my cup.
Yes you need to cut the cup scan it and draw your lines above image to get exact die cut