These Will Save My Parts
HTML-код
- Опубликовано: 7 июн 2024
- Most of the time I use the 4 jaw chuck on the lathe, I also use some makeshift soft jaws to protect the part finish. But my shoddily thrown together jaw covers look like an afterthought and don't necessarily give me the warm fuzzies that I like to have when using my tools. So today I’m spending way more time than necessary making something that will look a whole lot better. I guess they will work better too… but mostly they will look nicer.
#inheritancemachining #machineshop #hobbymachinist
Get the drawings for this project here: inheritancemachining.com/?pro...
Patreon (Early Access + Ad Free + Drawings) - / inheritancemachining
Drawings Store - inheritancemachining.com/?pro...
Merch: inheritance-machining.mysprea...
Instagram - / inheritancemachining
Website - inheritancemachining.com/
Amazon Storefront (affiliate links): www.amazon.com/shop/inheritan...
Thank you again to the Micrometer level Patreon members listed at the end of the video!
TIMESTAMPS
0:00 Intro
1:04 Gelatin
3:21 Square Dancing
6:26 This Part Is Boring
8:32 Consumables
11:56 Stress Concentrations Galore
13:31 Abracadabra is Matrix Algebra
15:25 Rounds?
16:50 How 'Bout Rounded Rounds?!
19:45 Lathe Lovin'
21:15 Was It Worth It?
FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
www.epidemicsound.com/track/S...\
• These Will Save My Parts
© 2023 Inheritance Machining, LLC. All Rights Reserved. 
Наука
Thank you so much for showing me how to be better at my job. My trainer has noticed an improvement in workmanship and gave me an 'atta-boy' I pass it on to you. Thank you my man.
thumbs up from me 😁👍
Great work man
An atta boy instead of a raise 🤦♂️
Should have told your boss you atta pay me more 😂
@@Dirkadewwhen you're being educated, you don't need to look for money from your educators too... the money will come in due time... lets not be greedy when we're only "half-baked"...
Congrats to the OP for going out there to learn...the process can be the reward... 😉
😎👍☘🍺
As much as the amazing examples of craftsmanship in these videos are inspiring and educational, no improvement would be possible without your own effort!
Hats off to you for putting in the work to improve your skill!
14:30 As a math teacher, this made me so happy to see! Also, you don't necessarily need a graphing calculator for the matrix multiplication. You could use something like Wolfram Alpha for example!
I didn't have either in high school. Had to do matrices on a regular scientific calculator.
You don't need anything of these. You only have to know one number. 1.414.
1.413 × 1 414 = 2
In Germany it is called Wurzel 2. And my mobile can't show the sign.
When you have a 45° angle and you need to know the kathete, you divide the hypothenuse with 1.414.
If you want to know the length of the hypothenuse, then take the length of the kathete an multiplicate with 1.414.
Easy. It's only the sentence of Pythagoras.
Note the two line display TI30xs also can do matrix math, works the same as the TI83 but just a bit harder to see. Super useful as its an approved calculator for the FE/PE exams where graphing calculators are not.
@@Dirk-Ulowetzin English we say "square root of 2", often abbreviated to "root 2". In programming many languages have a library function sqrt(2). My (android) mobile has √2!
I can't work out kathete though...
Also, in an attempt to be helpful, we use "by" instead of "with": multiply by 1.414, divide by 1.414.
@@georgescott6967 Kathete is from the greek Cathetus, which doesn't really get called that in lower maths. en.wikipedia.org/wiki/Cathetus
Absolutely love the journey of making a part in order to make the next part and the culmination of using all the parts to make yet another part.
😜😜
Side quests 😛😛😍
It's the true meaning of the channel name, the machines are for whoever inherits the workshop :b
That self-made rounding form tool on the mill was seriously impressive (and something I hadn't even considered). And it also worked amazingly well.
Thanks! I have no idea where that idea came from but not it's part of the arsenal!
@@InheritanceMachining - typo spotted: I think “not” should be “now”
@@InheritanceMachining - feel free to fix the typo if it is one; and then you can delete my comments.
It's a pretty old school make do method, but it's definitely valid
This workmanship is really the best I have seen, what a man!
at ~18:20 that is amazingly impressive. Seeing a corner round follow a path like that is amazing, but seeing it done on a manual mill is something else. Your work is a joy!
clever guy. would have never thought of that
Even a blind pig finds an acorn every once in a while 😁 Thank you so much!
“remember kids, the best type of kill is overkill”
if you come for the King
you better don't miss
and you have to go all the way
Really refreshing to see someone design their part the classic way
This channel is the reason I plan on learning to manually draft. I enjoy the elegance of paper drawings
I love my onshape and fusion, but god these hand-drafted drawings just look phenomenal.
Agreed. I’m not much of a drafter but I did learn to draft using paper and pencil while in an engineering program. Though slower, hand drafting produces nicer dwgs, IMO.
Seeing that swivel fixture in action was unexpectedly super satisfying! With these beautiful tools you keep making, who wouldn't want to work in the shop every day?
Those are gorgeous! As a cnc guy myself it is very impressive to see how you can turn out parts like these completely manually.
Thanks, man! As impressive as CNC is, I'm more impressed by the stuff they used to make on old manual machines like these.
It’s insane that u can accurately mill complex pockets on the manual. Ur skills are impressive
@mattholley9134 the pockets are... pretty basic lol the impressive part is the corner eounding honestly, or more specifically the fixture table made to make them.
They would cost $2000 to make the set at a manual job shop.
@@dickmick5517still impressive, because for a while this was the only way to get these parts.
19:10 The way the mill speed and the camera frame rate interact here makes this hypnotizing to watch. Also very cool to see previous builds make an appearance and do exactly what they were made to!
😁 One of my favorite shots! Thanks, Matt!
It's almost as he's been planning this for a long time. I am sure there's going to be more tools that will be needed to make more tools until we get to a "final" project he's been planning ever since he started the channel.
After that project is done, it's off to the next project.
Almost every video so far is just a side project to that main project methinks.
@@RealCaddeit‘s been side projects all along!!
My dad was a machinist and still has a bunch of old tools but no machines. I'd love to get into this someday. Thank you for bringing this world back to me.
Do it. It'd trade that pays the more you learn and grow.
One of the few that does nowadays that's only limitation is your imagination.
Just find a good tech school.
There are some awful programs.
Find one that's more hands-on and less book learning. The real learning in this trade is by communication and doing.
Your videos are engaging, beautiful, wonderfully shot and narrated. And best of all, the content is super interesting (for the non-machinist like me). Quickly becoming one of my absolute favorite channels on YT. Can't wait for the next one.
That really means so much. Thank you!!
Thank you for the hours of entertainment! I'm appreciative that I found your channel. It's reignited my desire to improve on my machining skills. My grandfather was a master tool and die maker for 50+ years and I've always wanted to follow his skills. My name is also Brandon and I'll be inheriting his lathe as soon as I can get down to California. Thank you for sharing your skills and journey!
Thank you and so sorry for your loss if he has passed. I hope you got to (or still can) learn some of his skills firsthand. 50 years of experience is better than what you could learn from any RUclipsr
Excellent design. Fantastic machining. Flawless editing........You are definitely one of the best machining content channels on YT- Thanks for taking us along!
Yes, definitely, thanks for the ride!
That is very nice of you! Thank you!
You did an absolutely killer job with this project! That home made corner rounding tool in a boring head worked so much better than I thought it would! You really put us CNC guys to shame with your fixture design skill; that radius fixture is performing beautifully!
A couple of things to keep in mind when doing big deep pockets like that: Sometimes, just grabbing a big drill to hog out the center can be way more time efficient, and then you can come back and mill out the rest of the material. in addition to being faster, the chips already have somewhere to go when roughing with an endmill now so you are less likely to recut them and break a tool. Also, it is definitely worth roughing first with a larger endmill and coming back with a smaller one to pick out the corners and finish. Of course this is coming from a guy who runs CNC, so doing a tool change is nothing, but with the amount of material to be removed at those depths you'd definitely still make your time back.
What I appreciate about your work is your precision, perfectionism and that you make your tools beautiful by themselves. It is just gorgeous.
Thank you! I put way more emphasis on appearance than I care to admit 😂
When you slapped the part on the rotary fixture table with your fancy clamps and dove tail centers it looked SOOO nice
Craig is the man, a buddy comes in with the save. Would love to see more of him
He's been helpful more than people know!
Those copper jaws look absolutely fantastic. Industrial art, right there!
Congratulations to Eric in providing those gorgeous reference pins!
The added humor is fun and adds to the video. Enjoyed!
I'm a Chef and will never own a lathe or a mill, yet I find your videos incredibly fascinating and quite cathartic. They appeal to my "inner geek" I guess. The quality of your vids are next level - matched by the quality of your craftsmanship. Thanks for sharing your journey with us. Your Grandfather would have been proud to see what you have achieved with his equipment. Truly inspirational stuff mate.
Man those things are SO pleasing to the eye! Crafting lvl 99 for sure. 18:02 That turn you made transitioning from one corner to the next while leaving the already smooth radius in between them untouched was so satisfying.
Ah you too suffer from RS?
I love your attention to tiny details to get the thing you want just the way you want it
Thanks man!
BTW, on your username, I'm reading The Halfling's Gem right now!
@@InheritanceMachining such a great series! I hope youre enjoying
By far the best 20 minutes of my week. Thanks!
No, thank you!
I’m sure everyone as said as much already but it can’t hurt to voice it again:
FANTASTIC JOB! I absolutely enjoy the drafting shots as it reminds me of the hours my dad would spend hand drawing Architectural plans for his house. The nostalgia of hand drafted designs really is captivating and then seeing them brought to life through manual milling must be incredibly rewarding.
While everyone may praise your drafting or machining, what really stands out is Your Filming and Editing talent. They are top class among youtube and even stand out compared to cable tv shows (that have camera men, lighting specialist, directors, microphone guys, support staff and a plethora of crew to compile/edit/produce and YOU DO IT ALL AS A 1 MAN SHOW 🍻 Cheers!
Currently my favorite machining channel. Drawings, setups, procedures, mistakes, home shop style, beautiful results. Smart, clever dude, too. Thanks for sharing.
I love the joy on his face while biting into the jello :)
Seeing the custom tooling you made for the round-over pass along the part, then sweep that corner...WOW!! That was incredibly pleasing to watch.
Thanks! Definitely my favorite op in this build!
I get so much joy watching this. It's like finding out that your philosophy professor has a machine shop, writes for SNL and sometimes plays backup lead guitar for Pink Floyd.
Genuinely entertaining yet instructional. Knowledge, art and humor.
HA!
I literally got giddy excited to see a new video out. This guy does such an amazing job
Good lord - those must be the most elegant soft jaws on earth! I was absolutely blown away by seeing how your new rotary fixture allows you to put a radius on a radiused corner. Fantastic job, Brandon!
Thanks so much, Ron! That one operations ended up making that whole build worth it by itself 😂
As always, it's super helpful to see the mistakes and learn from you. I'm just about at my 90 day review on a new job of running a 4 axis mill, and you've definitely been a huge help in learning all the things to watch out for
Hey, man that's awesome! Glad some of my shop musings could be helpful. Thanks!
That was very kind way of saying "by avoiding all the screw ups you made" LOL
I love how many parallels there are between machine work like this and data analysis in GIS Pro that I use. You have an ultimate objective but along the way you create tools, and toolkits and toolboxes, you learn new methods, learn and work together with others and break a few things along the way. Side projects increase as the complexity of the project increases. Some tools are more useful than others but the experience and joy you get while building something is so much more valuable. Thanks for helping me relax after hours and hours of GIS work.
I can’t express how much I have truly appreciated and fallen in love with your videos! As someone who doesn’t do machining your videos are very soothing and inspiring. And it took me two videos but your channels name is amazing! Can’t wait to see the rest of your journey and look forward to the next one!
Long reach endmills have no business being as satisfying as they are
Word
i love to watch you work. the attention to detail, precision work, and the problem solving are just pure pleasure for me 🙂
Thank you!
OMG! You did it! You used a Matrix calculation outside of school for a practical purpose! It's been 15 years since I last did one of those calculations in University and I still haven't been bothered to use it even once! Well done to you :)
😂 Probably one of the 5 times in the rest of my life I will have a use for that!
French here 🇲🇫, in some school: machining and drawing and cleaning the workshop, encounter some motivate loss and bad mood for student, but ! YOU find the solution!
Not due to young age or young stupidity, these student just need to see your video !
All of yours !
It's more than enough to give them new energy and motivational mind to succeed any doubt and problem!
That's the way to mind, the spirit of mécanique is here
They will WANT to take in their hands those beauty, useful beauty you've cut from this huge scrap useless metal that rust in the school workshop
I want all student in world see that to be remotivate for ever !
Well done 👍 this is probably the final best item you ever machined ! ❤
Another gloriously overkill but amazingly satisfying project Brandon! As a CNC guy I use carbide constantly and do recomend it to people doing 'home shop manual' stuff if they have solid enough machines and can stomach the cost, the benefits are worth it. Also 10/10 use of the awesome rounding fixture and the idea to make a lathe tool for the boring head, I feel no shame in admitting I let out an audible 'oof' of satisfaction seeing the 2 in action rounding that first corner. Keep up the good work my dude, your an inspiration!
I’m usually a jawjacking jabberjaw, but seeing those soft jaws dropped my jaw and left me positively lockjawed.
Well sir, it's not Tetanus, it's not TMJ, it seems to be a terrible case of Toolmaker's Trance.
@@barcodenosebleed5485 I definitely could definitively be diagnosed as dumbfounded.
It becomes fun when you take your time and pay attention to every detail. Nice work, great blueprints, really enjoyed watching your procedures.
Absolutely incredible work on those jaws.
Absolutely gorgeous, and so makes me want to cry, realizing just how far I am from this in my hobbyist workshop. Utterly inspiring to do better!
Thanks man! We all start somewhere, the key is to just keep going and improving.
You are a recent discovery and subscription on youtube, with me previously considering ABOM79 to be a representation of a serious machine shop, CuttingEdgeEngineering to do some huge projects in Australia (where i'm from ;-), and ThisOldTony to be the court jester of hobbyist machinists. Now you define a new classification of the "fine artist" machinist/machinist pornographer, lol, as everything I've seen you make is beautiful and or sexy beyond belief....well to a wannabe machinist anyway. Can't wait to see what you make next.@@InheritanceMachining
@@ozmaniac33 😁honestly it's an honor to be named amongst those guys. Really, thank you so much
13:47 if you dial in off of the moving jaw without it tightened onto a part you risk your angle being off slightly from the slop in that jaw. Not super important here but it is something to keep in mind for tighter tolerance angles. Btw awesome work, you make this look easy.
Good call! I didn't even consider that. Thanks!
Your channel honestly makes my soul happy!!
Watching you achieve such flawless beauty in your work is something that always makes my day. Thank you for the incredible content
😊 I love to hear that! Thank you!
Beautiful, I love the contrast of the steel and copper.
These guys on RUclips that spend their time making nothing but improvements to their tools is ironic. But i do like being able to watch them able to work without worrying about being productive.
It's worth remembering the videos are just the interesting projects, I'm sure he's using these machines and upgrades *all* the time when the camera isn't running
@@eragonawesome you're right. This dude's super productive and skilled
Those soft jaws look beautiful! i admire your efforts in making it look aesthetic and functional too
Thanks man!
You’ve convinced me that pieces of copper or aluminium sheet bent to shape are just fine. Certainly enjoyed watching you make those protectors though. Cheers mate, Stuart 🇦🇺
Just drill holes in your chuck jaws and use a single bent piece of copper or aluminium or a 3d printed sleeve (if you don't have a 3d printer, you can get the part made online and shipped to you).
@@aserta Thanks 👍👍
I really love you minuscule attention to detail it is really the trait of an excellent craftsman. When I’m done with university and able to earn some money I will start my own off time workshop it helps me to calm down. For the mean time you’re vids will do as relaxation! Every subscriber is really earned keep it up.
It's like a work of art!! I can't imagine the number of hours
Idk how but you always have something come up with, like you can make anything!
😁 thank you!
Man, your shop made tools are like jewelry, it's a joy the watch them. And the filming and relaxed storytelling is at the same high level. Thank you for sharing!
Not only to I envy the work you do but the time make for yourself to complete the work is also quite enviable!
Thanks! It does help that this is my full time job now 😉
Oh man those compound rounded corners are just slick as heck.
Those things look like you grew them! Killer job. Thanks for sharing this project. 😃
Those ended up being way more satisfying than I was prepared for 😆thanks!
Yeah they do. They make chamfers look like a crummy substitute... and I love chamfers!
Thanks for sharing as always. Was feeling pretty shitty, and seeing the amount of pride you take in your work, and the care you put into things always makes me feel a bit better haha.
Absolutely! I'm glad I could brighten your day a little 😊
Whenever I see one of your videos pop up, my life goes on hold for me to watch it, and they never cease to amaze me! Your ingenuity and intention to détail is something to behold! Thank you for another incredible video!
😁 Well thank you so much for making the time!
I love watching this channel. The quality of craftsmanship is refreshing to see in this day and age - especially since I work as a CNC programmer/manufacturing support.
I thought I would give a bit of my opinion on deep pocket milling for future reference. First off, the chips in the pocket were the problem for all of the endmills. Using air to evacuate the chips while cutting would have helped with endmill life.
The first endmill would have worked if the axial depth of cut was reduced and you left an extra bit of stock ( .005" to .030" depending on surface finish ) when the cutter was past its flute length. Then take an extra finishing pass when at depth.
As for the other endmills - the short flute endmills with a reduced shank would have worked well to follow the first end mill after you ran out of flute length on the shorter endmill, but they are still not as rigid as a shorter endmill, so their axial depth of cut would be less than the shorter endmill.
The coated carbide endmill that you ended up using to finish is a great finisher even in a deep pocket, but will not take as much of a radial depth of cut due to the shallower flute clearance.
The 3-flute endmill would have worked well in a center-out strategy with small axial step over at full depth, but that is usually reserved for a CNC.
I remember when my lathe instructor asked me "How was the first Lathe made? Without a Lathe to cut the threads or cut the gears?" Now I know..... *with the ingenuity of Brandon!!!!* 😁👍
Funny, That is exactly the question I pestered my teacher with "You need a lathe to make a lathe so how did they make the first lathe?" He had no answer but after 50 years in the business and never forgetting that question, I know it now. The answer is in the history.
@@billshiff2060a 3d printer 3d printed a 3d printer
Clickspring made a video where he creates a working lathe, that the Ancient Greeks could and probably did make and use, all with hand tools like files and drills he made my hand from materials we know the Greeks could make. The man's a genius. ruclips.net/video/4pK3O43Jddg/видео.htmlsi=NxKs7tHrAmXibu6d
Wow, one might end up thinking that you would eventually run out of cool projects and then you come up with this. Useful, clean and a great looking design. I loved seeing how you use your previously made tools to keep the cascade of projects on trajectory. BTW, getting the bore straight and parallel was what I referred to in my last comment in regards to testing dimensions to ASME drawing standards. Off course the set of gauge pins/dowels makes it easy. 😃
Thanks, Richard! My favorite projects are ones I get to use the most of my tools on! Honestly I think I could have gotten away with ISO's lax requirements for the bores on these 😉
The most mesmerizing and satisfying machining videos on YT. The copper pins in the steel jaws was just...delicious. The rounds rounding the corner were a joy to behold. Your rotary table is a masterpiece of concept, design and manufacture. It's beautiful to see it do its work so well here.
😁 thank you so much! Glad you have bene enjoying the journey!
I just love this project so much the way you brought together some of your other toolmaking projects! I always used copper Jaw covers like your aluminum ones after while they get tarnished and work hard but I anneal with a propane torch, and put them back in service.
Thanks a lot! That annealing step is pretty clever. I never would have thought of that!
I literally cheered and whooped out loud when you used your rounding table around the corners. What an absolute thrill
You sounds as excited as me! 😁
The Dad jokes are strong with this one! Love it!
😁
Use to hear that a lot in Southern WV, eastern KY and southwest VA(coal fields).
I found this video to be absolutely mesmerizing! The precision, the math, the smoothness of the finished product…wow!
I don't know why this video was even suggested to me by YT, but I don't regret spending 22 minutes to watch it. Thank you for this almost magical experience.
Great video as usual, you certainly own the swankiest set of soft jaws I ever did see. And don’t forget to fed the broken end mills to the BOS, it’s all metal, he won’t taste the difference😉
The BOS actually has quite a refined palate. It can differentiate many types of alloys, lol. 😃
Just waiting for the episodes where you just make your own mill and lathe haha
Clever, utilitarian, and beautiful all at the same time. It brings a tear to my eye. 😁
Beautiful job.
Its amazing how good machining just leads to more good machining and innovations.
Beautiful process.
I absolutely love this! Sure, this is kind of overkill, the "bent aluminium sheet" method works well enough.
But these parts turned out gorgeous. And as a side product, excellent entertainment!
I started regretting it a little after the 3rd endmill 😆 thanks!!
Could use some quick polishing on the rounds, but those look super nice! It'd be interesting to measure how repeatable they are vs the normal hard jaws and how much slack, if any, they give. And yes you also need some for the 3 jaw 😄 oh and plastic and jello pins, but that corner rounding fixture is pretty sweet!
Thanks, Josh! Repeatability would be interesting to measure though I have the advantage with the 4 jaw. Time will tell if i actually go through the torture of making a set for the 3 jaw 😂
How is it that everything you make comes out looking absolutely gorgeous?
Those rounded and rounded corners makes someone like me, who doesn't to any craftmanship at all, still warm and fuzzy inside from just imagining running my hand over those pieces.
So satisfying!
You learned something new adding to your skillset, you had fun, and the end result was artistic and it made you happy. It was worthwhile.
I love how you are using tools to make tools which you then use to make more tools! Just brillant!
That's pure beauty! love the attention to detail in your videos, as an Art Director I recommend your videos to my team to understand concepts of hard surface modelling. Love your videos!
Thank you so much!
thats some good drawing skills, respect for not just using a cad software. and i love the look of how these turned out, they look very professional, well thought out, and very user friendly, Good work 👍
I don't have the words to explain how awesome this video was. An over-engineered solution to a problem, which you made using a bunch of other over-engineered tools, some of which you made just for this project. I do machining for fun, not profit, and have come to realise that it doesn't really matter how long it takes as long as the process of getting there was fun. This video felt like the culmination of that outlook (although slightly disappointed you didn't use the sine-plate at some point to tie in every tool you've ever made!).
That moment when you hammered the copper soft jaws into the part was glorious. Both the finished objects, and the process, are as much art as they are machining, and I loved both.
i run a cnc machine for work im about year and a half in now but man do i love and respect the old way of doing things i also learn alot from every video
Man, u are what I would call an exceptional Machinist. The work u do is always on point. I've said it so many times in other comments on other videos that I'm always inspired but more so really impressed with ur knowledge of machining and the practical knowhow u have obviously built up over the years.
I would've loved to have inherited a machine from my Grandfather but I never knew either of them. They were both passed on before I was old enough to meet either plus I don't even know if they were into any of this stuff.
One of my grandfather was blind but he was supposed to be a great music teacher. I think that's where the will to self learn guitar might have come from but I never had his skills.. haha! I should've went for proper lessons back in the day. LMAO.
I digress pal. I haven't watched for a while but I have been watching the videos on ur channel all morning. Now I'm going to buy the lathe I want and I will look into buying a cheap Milling machine..
I know they'll never be the classy machines u have in ur shop but as I've already said I'm no Engineer, nor have I any business of owning top of the range Lathe and Milling Machine..
That doesn't mean I cannot enjoy another channel's content. From day one I have enjoyed every video bcos I learn something new every time and I do take notes on stuff to look up so I can learn far more on it.
One thing I seem to have no issue with is waffling on & on & on about videos on RUclips.. No problems with me running off on a mad one every time.
My apologies man. Great video content again. Look forward to the next binge watch of ur channel. Take it easy bro..
Salute from Dublin, IRE.
I can't believe how great this turned out. Idk why but at first I thought you were going to drill and ream each hardened chuck jaw and press in a dowel to locate each soft jaw. Your way is infinitely better. Absolutely outstanding skill and craftsmanship. I'm blown away with each and every video you publish. No one's doing it quite like this in the genre and I'm here for it !!
Thanks man! I really appreciate the encouragement! Funny you mention drilling the chuck jaws and now I'm wondering much much time I truly wasted 😂
I love your humor and great ideas, I think you made it to the top of my list and this is now my favorite RUclips channel!
😁 Thank you so much!
I just want you to know this is my favorite video of yours. I've watched it, I think five times. Well, it was until your shop clean-up video. That was inspired! With that wittyness, you quite simply MUST cross the streams with This Old Tony!
May the Shoo be with You!
Just watching you with so many live in the good well-done work, and the huuuge pleasure using it at end, definitely give me the goal to rework all my conventional machines to new look ! ❤
Cheers from France 🇲🇫
It's been a while since I've watched a machining video and this one didn't disappoint! Beautiful work!
My goodness man. Those look freaking sharp! Fantastic job!
I like your style. Soothing and entertaining at the same time :D
These parts are absolutely gorgous ! What an improvement !
Thank you!
I just found the channel and love the drafting element. I was learning paper and pencil drafting in 2003 in high school. Gotta love the old school shop teacher. Love the channel!
I don't even machine things, I just love watching things like this happening, at some point I will build myself a workshop, probably when I retire. Precision, finish, dedication. So relaxing to watch. And there is a lot of satisfacting in taking the time to create something that are just that nice.
Spent the last 3 weeks watching all your video’s from the start , up to date now , great channel
Machining 👏👏👏
Presentation 👏👏👏
Content 👏👏👏👏
You have gone to the top , one of my top 3 channels 👏👏👏👌
Cheers Chris
I love that you include all the hand drafting.
I almost cry , what a video ❤
As a long time viewer I absolutely love seeing you use all the tools I've watched you make in past builds.
Incredible craftsmanship and inspiring out of the box thinking.
I love this channel. I'm a chamfer and radius enthusiast as well. We have this 1" indexable radius mill at my work that I think you'd like. When I set it up in the CNC I touch off the tip then compensate for half the radius in height and diameter to land exactly in the middle of the tool and my radiuses come out perfect every time even after 500 pieces which was the last run. The insert did not need indexing once so it holds up if you treat it well.
spectacular work, spectacular workmanship!
Brilliant! I can’t even imagine what it must have taken to learn and develop all this talent!
I am constantly amazed at how fascinating I find watching an artist working at their craft. I have no milling experience nor do I ever expect to gain any. However, the meticulous nature and dedication that you display for your craft is definitely a mindset that is transferable to any "making" effort. Thanks for sharing with us.
Thank you very much, Chris!