Remove and install side skirt of 04 - 08 Acura TSX, TL, Honda Accord
HTML-код
- Опубликовано: 9 сен 2024
- Tools I used to remove bumper clips : amzn.to/3g46udh ,
or with the retainer clips: amzn.to/2X6P3As ,
Join Honey: www.joinhoney....
Earn high interest: www.marcus.com...
For people who like to try amazon prime video: amzn.to/3DNK4cr
(paid link)
Please help to reach 4,500 subscribers and click the like button if it helps. Thank you.
Step by step on how to remove and install side skirt of 04 to 08 Acura TSX, Honda Accord. When removing the side skirt, lift it up before pulling it out so you don't break the clip.
#acura
#hondaaccord
#sideskirts
#acura
#hondaaccord
#hondacivic
#honda
#hondacrv
#hondaelement
#hondafit
#acurarsx
#rsx
找了那么多视频，这是唯一的很清晰说明如何去除卡扣，每个步骤都清楚
Be careful I found that the skirt on the driver's side of my UK '05 Accord has to be pushed towards the rear of the car (from the front wheel well) to remove it. Luckily I didn't break any clips trying to push it forwards. But apart from that this video was very helpful to me. I'm trying to treat some rust in that area.
💯 correct I had to do that as well but I didn't realize that till I broke the 1st clip. Florida here
Do you still have the car? I’ve got a 2006 and I’m dealing with some rust in the middle area of the skirt, underneath (needs a bit of welding). I’m in the uk as well. Can you say some more about your rust issue? I’m currently Lanoguard protecting my car .
A Uk car still needs to be prised off at the back because of that raised part at the rear. You can’t just slide it back as it is restricted at the rear wheel arch.
The clips on the sides just turn 90degrees and come out. You don’t have to pry them out. The rocker panel also just have to be tapped forward with a mallet and slides off the clips.
You prolly dont care but if you guys are stoned like me during the covid times you can stream all the latest movies on instaflixxer. Have been binge watching with my gf for the last days =)
@Landry Mark Yea, been watching on InstaFlixxer for months myself :D
@Landry Mark yea, have been watching on instaflixxer for months myself :D
Thanks man. Fixing some rust on my 05 Accord. Easy off but was puzzling about how to get it back on. Thanks for the demonstration.
Thank you sir, only person that showed full process 😊
This video is a life saver!!! 🙏💪👍
This was a life saver, thank you!! 👍🏼
You're welcome 😁
Thanks just did it myself
Thank you good video
Thanks much
You sir are a legend
Who else squinted at the video when he was trying to pop the fastener out😅🤣
how not to do it...
You never ever pull that thing off, you slide it back and remove it.
Those clips that you were pulling with a screwdriver needs to be rotaded 45 degree and just pull them out by hand.
I cringed when I saw him pulling it up and out. You can damage it that way. Slide the entire rocker toward the back after removing the plastic rivits.
The tsx side skirt fits the 7th gen accord
I feel so fucking stupid for not putting the tabs on the panel while it was off. You know what I'm doing when I get home lmao
Thanks for the tips
Honda Accord 2009 left side skirt the same?
Similar concept
My clips don't sit in the housing and keep falling out even after I turned them wtf, I just bought these clips off eBay for 8$ they are completely identical to the OG clips but they don't sit inside the housing this is so frustrating I had to super glue them in
Does facelift side skirts fit on pre facelift accordm
Sorry, I m not sure
How do you properly take it out ? I had taken out all the clips on my 02 and I still can't seem to take it out no matter what I try to do. I've even tried prying it but I stopped cause i don't want to break anything.
3 screws and clips are holding it
You have to push the rocker forward or back, but from the orientation of the clip mounts on the rocker, it seems like you would just push it toward the back of the car.
Does 2011 is like this too?
I am not sure. I believe it will be about the same
My nigga how
which part do you have problem pulling the side skirt out?