Improving DIY Solar Pool Heater - Now With More SUN - 1394
HTML-код
- Опубликовано: 6 июн 2024
- It was awesome weather for the weekend, and I took full advantage of it, and played around with improving my solar pool heating system. I did not plan this much before starting,, so it takes a few turns, as I hit dead ends.
This video is really not very IT related,, but I did manage to get myself a nasty sunburn,, still a nerd!! :-)
[Affiliate Links]
10% Off coupon code: MyPlayHouse
This discount code works in both Allpower US stores (shrsl.com/4l5cu) and EU stores(shrsl.com/4l5cw)
ALLPOWERS R1500 Power Station : shrsl.com/4jaxo
ALLPOWERS R2500 Power Station : shrsl.com/4atj8
ALLPOWERS SF100 Flexible Solar Panel 100W : shrsl.com/4jaxv
ALLPOWERS SF200 Flexible Solar Panel 200W : shrsl.com/4atjh
ALLPOWERS SP033 Portable Solar Panel 200W : shrsl.com/3y3fm
ALLPOWERS SP037 Portable Solar Panel 400W : shrsl.com/44d6r
___________________________________________________________________________________________________
/ myplayhouse
For 3$ a month, you get an extra weekly "What's UP" update video. Just for my Patrons. The Support I resave on patreon is all used on stuff to make interesting videos on RUclips.
My PlayHouse is a channel where i will show, what i am working on. I have this house, it is 168 Square Meters / 1808.3ft² and it is full, of half-finished projects.
I love working with heating, insulation, Servers, computers, Datacenter, green power, alternative energy, solar, wind and more. It all costs, but I'm trying to get the most out of my money, and my time. Наука
There's always a chance that the neighbor doesn't like the tree either ;) It's always worth discovering to see who is responsible for it when it falls.
Well I would suggest cutting it down to 3 or 4 meters.
@@MyPlayHouse or you could make a deal,he cuts the tree and you never start that noisy pump again :D
@@marcel40625 totally needs a quiet pump, as he said he doesn't need much flow rate, but needs a little bit of lifting pressure to start the loop once water is drained.
Awesome
Thank you!
Arduino solar tracker, bearings and some plumbing fittings to move the solar heater around 😁
Improvements can be made,, tha angle is also not optimal,, but this is a lot easier than before.. :-) But since filming this the weather has not been good. And I have most fun with this in sunny weather.
👍perfect
Thank You!
I built a solar pool heater a few years ago. I used a similar small pump, but mine is perfectly silent (was like 10€ on ali). I added a small microcontroller which monitors the pool temp and the solar collector's temp. It switches the pump on if the solar collectors temp is above the pool temp. So at night the solar collector won't cool the pool. Also insulating the solar collector gives a huge boost. A sheet of osb, coiled the pipe on it, added a frame and transparent foil over it. I calculated that it heats with 1,5kW from the ~3.1m2 area.
Well if the solar panel is pointing in the same direction as the heater,, it should only run when there is enough sun to also heate. I should order a new pump.. I guess!!
You probably also want to invest in some anorganic chlorine, ph minus and plus powder and a ph measurement device. Keep the PH between 7.2-7.4 and add chlorine once a week and you should be good. That's how you maintain a hottub that doesn't get it's water replaced more than once a year.
I have free water,, if the values gets bad,, replacing is the easy fix..
For pool heating it's a waste to spend battery charge cycles on that, the panels should just power the heater directly, there's no problem if power to the heater has unstable voltage or disappears for a while. Also, don't take down the good large trees! Good shade, nice separation from neighbours, and clearing the air. It's not like solar is crucial to have, you aren't off-grid after all.
I want to trim it down to like 3-4 meter,, It is really not often that shade is needed here,, most of the time is is way to cold. :-)
I think a cover that lays on top of the water would help greatly to prevent losing heat to evaporation. A black cover touching the water could even help heating the pool.
Would love to make a little greenhouse on top of it,, need some to that transparent plastic,, and that is expensive,,here..
Now I'm thinking about starting again on my Pool heatpump project that is in the garage for 3 years 😅
I like playing with this,, also when I am not filming :-)
Painting the pool tiles black is out of the question right ;)
Yes you would not want to go in to a black pool😳
Put your Chinese on the pool 👍 Or make an wood burned pool 26:14 heater 👍
I found that I could put it in the water.. way less noise..
Chinese heatpump *
Hi, I guess that if you put that pump into the pool the noise will not be an issue ;)
I was not sure if the pump was water proof,, it is and a lot less noisy under water 🤔
Oh no! You’re not going to keep the original Little Menace? It’s probably sulking because you’re using that push mower… lol 🤣
Little Menace has been braking down on me, more than I have showen...
Resistive heat in the bottom of the pool? You should see if you can find a small heat pump.
That could be an interesting improvement, at some point 😳
It's a spa
not warm enough :-/
you don't wanna wait to get into the pool at afternoon, so you mounted this heater, don't you
I mounted the heater to be able to use the pool more,, this year 😬
+1 for not that kinda viking to
WE like our warm water :-)
Don't suck the hose!
Well I am not making any promises... :-)
Can you make a review on your Lenovo x3650 m5 ?
I have more than one videos on that model...
The plastic boards they use campaigning for the upcoming election has closed channels. One could 'harvest them for the environment', paint them black, and use them as thermal panels.
There is lot's of room for improvement :-)