The game does have issues with certain textures atm but if you are experiencing any graphical glitches or certain textures not loading AFTER changing things in the config file, try this: Before closing your game restart shaders pre-loading, close your game, open your config file again and change STLodSkip back to "0" and relaunch the game. Like Comment Subscribe and Share! Enjoy Modern Warfare 3!
hey brandon! thanks for the xmp tip that really helped :) i was wondering if you knew a way in which i could get a hold of my config settings because i cant find them or if theres a way to reinstall them? any help would be appreciated!
@thevaxzii Glad I could help! I’ve seen a couple people say their config file is missing… It could be somewhere else in your system. In file explorer, try searching for options.4.cod23 and see if anything comes up from the search.
I have 13700kf and cpu usage was 65% only with mw3, now it's 33%. It made the game much better. Thank you very much, I will recommend it to my friends! :)
If you have a Gsync monitor with module, you should be enabling V sync as well in conjunction with Gsync. I recommend using Nvidia control panel forced Vsync on. without the in-game option.
We appreciate the work you do for the community. Quick question, I think you skipped over STLodSkip in the config. What does this do and do we need to change it to 5?
@mikeytreees one of the updates they released caused that setting to create graphical issues on certain dirt textures, so I edited that part of the video out. I’d recommend leaving it to the default value.
Consoles set in New Zealand were able to play early and if you joined someone’s lobby that was in the game, you could play regardless of region or device!
Before I really watch this, i somehow have the same fps being 170-200fps in mwz and warzone and 180-300fps which seems to be more 300 or 280fps in multiplayer all on maxed settings with a ryzen 7 5800x and rx7800xt and im confused since I barely did anything and mid-low settings i had worse fps, big confusion i don’t particularly understand graphical settings on pc since i played console up until a year ago almost 2 years and i only ever watched other people
Definitely a huge improvement on fps, but I’m just thinking if any game data is being corrupted by doing this? For example, I’m gaining fps but is it creating issues with latency, input lag, packet loss etc? Could you also please let us know how to set the config file back to default? Is deleting config file and then starting the game again going to set it back to how it was before?
@nazmulhuda6794 This shouldn't cause any issues at all with file corruption. Most people I've talked with, this has actually improved/removed input latency and packet loss. The config file will be reset back to the default settings when you delete it. It won't go back to whatever settings you had before, just the default settings for your system.
Question about gun camo textures.. they look very pixelated no matter what I change in game settings. I've even gone to high settings on everything and nothing changes. Do you know the setting (either in config file or in game) that effects the gun camos?
@drose9311 Texture Resolution is the main setting that improves pixelation for gun camos. Just make sure to restart your shaders and relaunch the game after you change the setting for it to take effect.
Followed your settings exactly they work great I really appreciate it, but it seems that some maps like derail and wasteland for example have messed up textures. Some things are transparent, clearly don't look how they should etc. Any idea if this is the settings or a bug with the launch of the game?
@jackricotta That depends on which textures its occurring on. These settings generally will make foliage look a bit weird or transparent because the level of detail settings and texture resolution settings. But I have noticed certain parts of some of the maps just won’t render in regardless of the settings used. Once we get a couple launch updates to the game for bug fixes and whatnot, I plan on retesting and spending some more time getting even more in-depth testing done.
@@brandonnine ok I feel like its something to do with my config file or just a bug in the game, but i just ran through a dirt texture that was blocking the stairs on estate opposite spawn of house side
I am having this same issue, and I Haven’t been able to find anyone else talking about it until now. I assumed it had something to do with the config file, so it’s weird that reverting the changes didn’t fix it.
@yaler This seems to help for some of those that are experiencing issues with dirt textures and other graphical issues: Before closing your game restart shaders pre-loading, close your game, open your config file again and change STLodSkip back to "0" and relaunch the game. Let me know if that helps!
When I did the DOCP in BIOS, my computer refused to start and booted in safe mode, I had to revert back to default. I guess my CPU didn't like that haha. Great Video!
@boythunderbolt Yeah, that can happen if your memory speed is too fast for your particular cpu/motherboard combo or if it’s just an incompatible kit. What CPU do you have? Did you happen to notice when you turned it on in bios what the memory speed it was trying to run? Also, in your task manager, what is your current memory speed?
Always looking for settings guides and this is the first time i heard about the RAM expo/xmp. Intersting that i got an amd motherboard with ddr4 and AMD expo only supports ddr5 which sucks.
i keep having stutters? i did everything from changing quality’s and driver updates and everything? any other idea what the problem could be ? i use battlenet btw
It seems a lot of people are struggling with stutters and constant packet bursts. I haven’t been able to find any common denominator between the systems having issues and the ones that aren’t. Hopefully they’ll have an update soon that addresses it.
texture filtering should almost aways be on 16x or 8x. Either high or medium it has almost no performance hit on games and improves image quality on textures.
Yeah, this is why I made the campaign video showing the differences in performance between every single setting so if you want better visuals with optimized fps.
Hey Bnine I get decent frames and visibility would this also help with packet burst.. I receive it for anywhere from 1-3 minutes of the game when I start matches
@bigb0isp00n5 it depends on why your getting packet bursts. If it’s game performance related, these settings may help, if it’s internet related, these settings won’t change it at all. Unfortunately I haven’t been able to test what’s exactly cause the packet burst issue, but most people are struggling with it. Hopefully they’ll send out an update to help with it. Sorry I couldn’t be of more help
@@brandonninemy packet burst I think is caused by frame drop , cause when I load into games for the first few mins it shows packet burst and I can see my frames jumping from 150 all the way down to like 70 or 80 and idk how to fix the frame drop
Hello good video 👍🏼 A friend and I have graphic glitches in multiplayer and zombies, but the fps are really good with nvidia 3080 after we change the config file. Have a other this problem? Comes a new video with full game version ? Thank you.
@derrantas I haven’t had any graphic glitches from these settings alone, just ones that the game has that they need to fix. But yes, once they get a few launch week patches out, I’ll be retesting and posting another video with updated settings!
@derrantas This seems to help for those that are experiencing graphical glitches. Before closing your game restart shaders pre-loading, close your game, open your config file again and change STLodSkip back to "0" and relaunch the game. Let me know if that helps!
Followed everything, great 120-180fps and that depends on the map but with zombies.. most dirt floors arent loading and I'm seeing myself running under the map and so on. it lets me see through some walls and I have shared the same settings with others and they dont have this bug they haven't done the files. I'm wondering what I can do to fix this or if I can get some help
@ridgyuk Before closing your game restart shaders pre-loading, close your game, open your config file again and change STLodSkip back to "0" and relaunch the game. That seems to help for those that are experiencing issue with dirt textures. Let me know if that helps!
For anyone curious, I tested the Enable DirectX Raytracing Off vs Ultra in the config file and nothing happens in game. I'm curious why they left that string in the config file, unless they plan to use it in the future.
@JagsP95 I thought I had heard or read something that it was only for the campaign, but still weird that’s in the config instead of the in-game settings.
HUGE preformance increase compared to MW 2! Im getting an average of 320-340 FPS average with your settings!! So thank you!! Just for anyone who wants to use as a reference/ comparison Im running a i9 12900K OC to 5.3GHz all core w/ Hyperthreading, C-State, EIST, Speed Shift, and E-Cores all off. ROG STRIX 4080 OC in Afterburner (Core Clock +150 mHz, Memory Clock +1450, Power Limit max to 118% , and temp limit to 88) 16 Gb of 3200 CL16 DDR4 RAM XMP enabled and 360hz 1440p 27" ROG STRIX PG27AQN monitor.
i have a cpu bottleneck only on mw3/2/wz2 anyone got a fix for this? its really annoying that i get like 120-70 fps " I5-12400f / rx6700xt " on low / high settings i wanna reach 200fps and i know i cant reach it if i just fix the bottleneck i have 30% cpu bottleneck
@sexy.3316 unfortunately, there’s probably not much more that you can get out of that 12400F since you can’t overclock it (call of duty is EXTREMELY cpu/ram intensive). What memory speed do you have showing in your task manager?
@charlot445 @nonameeu3044 I haven’t been able to test out that configuration myself, but if it’s the same as MW2 (which it seems like it’s similar) try putting in the number of performance cores that you have, “6”. Let me know if that helps!
I haven’t been able to test that configuration myself, but if it’s like MW2 (which it seems like it is) try putting your number of performance cores. “8” in your case I believe. Let me know if that helps! @mrnesrielnightmare
FidelityCas FX is only working great on AMD cards ! it looks like i set my film grain on 50% or so. its not good. for me its OFF with DLSS fidelitycas, and so on. just off..
You need an nvidia 4000 series GPU to have that option, but I personally wouldn’t recommend frame gen for a fast paced first person shooter game like cod.
I’m still working on testing but it seems like using the number of “performance” cores that you have is usually optimal. I’ll put out another video once my testing is done.
Interesting. I haven’t experienced anything like that yet. Could just be a launch day bug. If I hear anything or find a solution I’ll let you know. @glennparedis2429
@glennparedis2429 the config file is what saves your in game settings, so if it’s gone, that’s probably why your settings don’t hold. Try searching in file explorer for options.4.cod23 and see if it’s maybe in another location incorrectly.
This seems to help with those that are experiencing certain textures not loading. Before closing your game restart shaders pre-loading, close your game, open your config file again and change STLodSkip back to "0" and relaunch the game. Let me know if that helps!
Went through the settings changing stuff and the first off thing I noticed is that the game is using 13 threads. I have an i7 12th gen, my limit is 12 and 4 of those are e cores where tf is that last core getting used from Also my ram clock speed is 2100, never paid attention to that I have 16gb of ram so I thought I was good, guess I’ll see what I can do about that
@nolyfe4814 you technically have 20 threads, so that’s why it went to “13” but I’d recommend setting it to “8” and see if that shows any improvement. Also make sure you enable XMP in your bios to up your ram speed from 2100 to whatever you paid for. It makes a world of difference and is as simple as going into your bios and just changing a drop down setting.
Did it, though ram speeds only increased to 2600mhz I got good results. Saw a 50fps increase so now it’s sitting at 260. I only have a 165hz monitor though so I can’t use it yet. Gonna have to swap out some parts in the future
@nolyfe4814 Nice! Solid gains! Should help a lot with 1% lows as well by having less stutters/frame drops! That’s really strange to have such low speed with newer hardware like that. Is that older ram from a previous build? I’d try to find a part number on the ram sticks themselves and see if the rated speed is actually that low.
@@brandonnine 🤔 naw I mean I had a pre build but I’ve been swapping out parts over the past year. The only part I didn’t replace was the ssd. The ram, mother board, cpu, and case came from micro center. I got the ram free cause I bought a bundle. It’s a the g skill rip jaws. Bought a 4070 and psu last month, also some fans.
@nolyfe4814 Yeah, I highly doubt they’d give you 2600mhz ram even if it was for free. I think it’d be worth double checking the part number from the invoice or on the ram sticks themselves and see what they are supposed to be. Usually 3200mhz is the standard for those ram bundles.
I’ve been seeing a lot of people (including myself) getting packet burst and random crashes regardless of the settings. Hoping they come out with some updates to address it soon. I’ll be retesting everything in a week or so once they get a couple patches out.
Just want to say you’re a legend, game looks and runs great. Thanks man!
Just wanted to say thanks for the video. You fr made mw2 run so much better and now the same for mw3 🙂
I’m glad I could help! Appreciate the support!
thanks again for updating this 👍
Of course! Happy to help!
THANK YOU MAN!!!!
Glad I could help!
The game does have issues with certain textures atm but if you are experiencing any graphical glitches or certain textures not loading AFTER changing things in the config file, try this: Before closing your game restart shaders pre-loading, close your game, open your config file again and change STLodSkip back to "0" and relaunch the game. Like Comment Subscribe and Share! Enjoy Modern Warfare 3!
My game crashed in zombies after doing the config file. I didn’t have issues like this on mwII. Will try again.
@@ZakaryRyanVrhel Zombies servers have been crashing for everyone. Hoping for a sever side update soon. 🤞🏼
Hello bro, as of today there are none of the lines you mention within that file
What is STLodSkip:0.0?
Thank you ❤
Of course! Glad I could help!
When I do all these setting dose my stuff in the main minus suppose to be blurry asf?
hey brandon! thanks for the xmp tip that really helped :) i was wondering if you knew a way in which i could get a hold of my config settings because i cant find them or if theres a way to reinstall them? any help would be appreciated!
@thevaxzii Glad I could help!
I’ve seen a couple people say their config file is missing… It could be somewhere else in your system. In file explorer, try searching for options.4.cod23 and see if anything comes up from the search.
I have 13700kf and cpu usage was 65% only with mw3, now it's 33%. It made the game much better. Thank you very much, I will recommend it to my friends! :)
That’s awesome! I appreciate you! Glad I could help!
@@brandonnine I have 13700K with a 4080, my CPU usage never passes 48%, RWC is by default at 15, shall i change it?
@@saidrahal Yeah, I would try “8” and see if you see an improvement!
If you have a Gsync monitor with module, you should be enabling V sync as well in conjunction with Gsync. I recommend using Nvidia control panel forced Vsync on. without the in-game option.
Yeah, that’s correct. In-game vsync should always be off.
nice brow tanks
🤝
We appreciate the work you do for the community. Quick question, I think you skipped over STLodSkip in the config. What does this do and do we need to change it to 5?
@mikeytreees one of the updates they released caused that setting to create graphical issues on certain dirt textures, so I edited that part of the video out. I’d recommend leaving it to the default value.
Aspect ratio should be set to 21:9 to reduce eye fatigue on large panel. I tried it and never look back.
When I try to set my custom frame menu limit to 60 it doesn’t stay at 60
can you show me how to do since my 3070ti with 5600x
Nice , thx again and again and again 😅 btw how are you already able to Play on pc
Consoles set in New Zealand were able to play early and if you joined someone’s lobby that was in the game, you could play regardless of region or device!
Before I really watch this, i somehow have the same fps being 170-200fps in mwz and warzone and 180-300fps which seems to be more 300 or 280fps in multiplayer all on maxed settings with a ryzen 7 5800x and rx7800xt and im confused since I barely did anything and mid-low settings i had worse fps, big confusion i don’t particularly understand graphical settings on pc since i played console up until a year ago almost 2 years and i only ever watched other people
Definitely a huge improvement on fps, but I’m just thinking if any game data is being corrupted by doing this? For example, I’m gaining fps but is it creating issues with latency, input lag, packet loss etc?
Could you also please let us know how to set the config file back to default? Is deleting config file and then starting the game again going to set it back to how it was before?
@nazmulhuda6794 This shouldn't cause any issues at all with file corruption. Most people I've talked with, this has actually improved/removed input latency and packet loss.
The config file will be reset back to the default settings when you delete it. It won't go back to whatever settings you had before, just the default settings for your system.
Question about gun camo textures.. they look very pixelated no matter what I change in game settings. I've even gone to high settings on everything and nothing changes. Do you know the setting (either in config file or in game) that effects the gun camos?
@drose9311 Texture Resolution is the main setting that improves pixelation for gun camos. Just make sure to restart your shaders and relaunch the game after you change the setting for it to take effect.
Followed your settings exactly they work great I really appreciate it, but it seems that some maps like derail and wasteland for example have messed up textures. Some things are transparent, clearly don't look how they should etc. Any idea if this is the settings or a bug with the launch of the game?
@jackricotta That depends on which textures its occurring on. These settings generally will make foliage look a bit weird or transparent because the level of detail settings and texture resolution settings. But I have noticed certain parts of some of the maps just won’t render in regardless of the settings used. Once we get a couple launch updates to the game for bug fixes and whatnot, I plan on retesting and spending some more time getting even more in-depth testing done.
@@brandonnine ok I feel like its something to do with my config file or just a bug in the game, but i just ran through a dirt texture that was blocking the stairs on estate opposite spawn of house side
swapped back to the old config file with no changes same thing is happening gotta be a game issue
I am having this same issue, and I Haven’t been able to find anyone else talking about it until now. I assumed it had something to do with the config file, so it’s weird that reverting the changes didn’t fix it.
@yaler This seems to help for some of those that are experiencing issues with dirt textures and other graphical issues: Before closing your game restart shaders pre-loading, close your game, open your config file again and change STLodSkip back to "0" and relaunch the game. Let me know if that helps!
Does the nvidia control panel setting u made on mw2 work on this game too?
@adobongchicken596 Yes!
When I did the DOCP in BIOS, my computer refused to start and booted in safe mode, I had to revert back to default. I guess my CPU didn't like that haha.
Great Video!
@boythunderbolt Yeah, that can happen if your memory speed is too fast for your particular cpu/motherboard combo or if it’s just an incompatible kit. What CPU do you have? Did you happen to notice when you turned it on in bios what the memory speed it was trying to run? Also, in your task manager, what is your current memory speed?
Always looking for settings guides and this is the first time i heard about the RAM expo/xmp. Intersting that i got an amd motherboard with ddr4 and AMD expo only supports ddr5 which sucks.
@xendon depending on your motherboard, it may be called DOCP or A-XMP.
@@brandonnine Thanks bro found out mine is a-xmp ur the goat 🐐
i keep having stutters? i did everything from changing quality’s and driver updates and everything? any other idea what the problem could be ? i use battlenet btw
It seems a lot of people are struggling with stutters and constant packet bursts. I haven’t been able to find any common denominator between the systems having issues and the ones that aren’t. Hopefully they’ll have an update soon that addresses it.
Does the Warzone II settings changed? or does it still like the last vid you made? anyway ty for the vid
@denyyy Warzone 2 settings are still the same from my season 6 update video.
@@brandonnine ok! Ty bro
Of course, my pleasure!
texture filtering should almost aways be on 16x or 8x. Either high or medium it has almost no performance hit on games and improves image quality on textures.
Yeah, this is why I made the campaign video showing the differences in performance between every single setting so if you want better visuals with optimized fps.
Hey Bnine I get decent frames and visibility would this also help with packet burst.. I receive it for anywhere from 1-3 minutes of the game when I start matches
@bigb0isp00n5 it depends on why your getting packet bursts. If it’s game performance related, these settings may help, if it’s internet related, these settings won’t change it at all. Unfortunately I haven’t been able to test what’s exactly cause the packet burst issue, but most people are struggling with it. Hopefully they’ll send out an update to help with it. Sorry I couldn’t be of more help
@@brandonninemy packet burst I think is caused by frame drop , cause when I load into games for the first few mins it shows packet burst and I can see my frames jumping from 150 all the way down to like 70 or 80 and idk how to fix the frame drop
@@ceethannatch7959 this might not fix it or do anything, but try changing the “GPUUploadheaps” setting to “false” and see if that improves it at all.
@@brandonnine for sure I’ll try it and let u know thanks for replying
Hello good video 👍🏼 A friend and I have graphic glitches in multiplayer and zombies, but the fps are really good with nvidia 3080 after we change the config file. Have a other this problem? Comes a new video with full game version ? Thank you.
@derrantas I haven’t had any graphic glitches from these settings alone, just ones that the game has that they need to fix. But yes, once they get a few launch week patches out, I’ll be retesting and posting another video with updated settings!
@@brandonnine Thank you.
@derrantas This seems to help for those that are experiencing graphical glitches. Before closing your game restart shaders pre-loading, close your game, open your config file again and change STLodSkip back to "0" and relaunch the game. Let me know if that helps!
@@brandonnine ok i test it.
Followed everything, great 120-180fps and that depends on the map but with zombies.. most dirt floors arent loading and I'm seeing myself running under the map and so on. it lets me see through some walls and I have shared the same settings with others and they dont have this bug they haven't done the files. I'm wondering what I can do to fix this or if I can get some help
i have this issue aswell
@ridgyuk Before closing your game restart shaders pre-loading, close your game, open your config file again and change STLodSkip back to "0" and relaunch the game. That seems to help for those that are experiencing issue with dirt textures. Let me know if that helps!
@@brandonnine thank you so much, its fixed it all but i do lose about 10 fps but its all fixed which is the main focus. again, thank you
i as well had this same issue and was wondering what change in cofig file was causing this. only happens on zombies
For anyone curious, I tested the Enable DirectX Raytracing Off vs Ultra in the config file and nothing happens in game. I'm curious why they left that string in the config file, unless they plan to use it in the future.
@JagsP95 I thought I had heard or read something that it was only for the campaign, but still weird that’s in the config instead of the in-game settings.
@@brandonnine I haven't tested it in campaign ill see if it does anything.
thank you!! I only trust you mate!
I appreciate the support!
When i set the "xmp" overlooking to 3200 like it's supposed to be it raises my dram voltage to 1.350 and is red. Is that ok??
@thetwogunkidd3281 1.35v is perfectly fine and is the base voltage for ddr4. Some kits go as high as 1.55v.
thankyou so much for the swift reply and the knowledge@@brandonnine
@thetwogunkidd3281 Of course! Glad I can help!
GOAT
HUGE preformance increase compared to MW 2! Im getting an average of 320-340 FPS average with your settings!! So thank you!! Just for anyone who wants to use as a reference/ comparison Im running a i9 12900K OC to 5.3GHz all core w/ Hyperthreading, C-State, EIST, Speed Shift, and E-Cores all off. ROG STRIX 4080 OC in Afterburner (Core Clock +150 mHz, Memory Clock +1450, Power Limit max to 118% , and temp limit to 88) 16 Gb of 3200 CL16 DDR4 RAM XMP enabled and 360hz 1440p 27" ROG STRIX PG27AQN monitor.
That’s awesome! Glad I could help!
Of course your PC is buffed the fuck out
DAMN
i have a cpu bottleneck only on mw3/2/wz2 anyone got a fix for this?
its really annoying that i get like 120-70 fps " I5-12400f / rx6700xt " on low / high settings
i wanna reach 200fps and i know i cant reach it if i just fix the bottleneck
i have 30% cpu bottleneck
@sexy.3316 unfortunately, there’s probably not much more that you can get out of that 12400F since you can’t overclock it (call of duty is EXTREMELY cpu/ram intensive). What memory speed do you have showing in your task manager?
Need help on mw3 why does it say I have a 6.55GB in vram which I have a total of 24GB installed into my laptop. Could anyone help me ?
@user-vt1zm2zd6l Assuming you have 24GB of system ram, system ram and video ram (vram) are two different things.
What about i5 13600kf 14 core 20 threads for render? Thanks for this video
Please i5 13600kf 14core 20threads ?
@charlot445 @nonameeu3044 I haven’t been able to test out that configuration myself, but if it’s the same as MW2 (which it seems like it’s similar) try putting in the number of performance cores that you have, “6”. Let me know if that helps!
@@brandonnine I have 14 hearts, so I need 6 in RendererWorkerCount (1 to 16) 6?
You have 14 cores, 6 performance cores and 8 efficiency cores. You want to try “6” to match the number of performance cores you have.
@@brandonnine thanks for your help! Have a good day 🫡
what about 12 core 20 threads for render?
I haven’t been able to test that configuration myself, but if it’s like MW2 (which it seems like it is) try putting your number of performance cores. “8” in your case I believe. Let me know if that helps! @mrnesrielnightmare
The note thing doesn't work. Everytime you re open the game it resets to what it was.
You can click on the file and go to properties and have read-only checked to prevent them from changing
FidelityCas FX is only working great on AMD cards !
it looks like i set my film grain on 50% or so. its not good.
for me its OFF with DLSS fidelitycas, and so on. just off..
No option for dlss 3 and frame gen?
You need an nvidia 4000 series GPU to have that option, but I personally wouldn’t recommend frame gen for a fast paced first person shooter game like cod.
@@brandonnine yes i have 4070, but only story mode appears.
Hey what if you have 16 codes and 24 threads?
I’m still working on testing but it seems like using the number of “performance” cores that you have is usually optimal. I’ll put out another video once my testing is done.
My settings keep resetting after i close the game and start it again. Any idea what this can be?
The in-game settings or the config file settings?
The in game graphics and display settings
Interesting. I haven’t experienced anything like that yet. Could just be a launch day bug. If I hear anything or find a solution I’ll let you know. @glennparedis2429
I also do not have the options 4.cod23 file. Any ideas what that can be?
@glennparedis2429 the config file is what saves your in game settings, so if it’s gone, that’s probably why your settings don’t hold. Try searching in file explorer for options.4.cod23 and see if it’s maybe in another location incorrectly.
anyone else that did this have some weird graphical issues with the maps not loading textures correctly?
This seems to help with those that are experiencing certain textures not loading. Before closing your game restart shaders pre-loading, close your game, open your config file again and change STLodSkip back to "0" and relaunch the game. Let me know if that helps!
Went through the settings changing stuff and the first off thing I noticed is that the game is using 13 threads. I have an i7 12th gen, my limit is 12 and 4 of those are e cores where tf is that last core getting used from
Also my ram clock speed is 2100, never paid attention to that I have 16gb of ram so I thought I was good, guess I’ll see what I can do about that
@nolyfe4814 you technically have 20 threads, so that’s why it went to “13” but I’d recommend setting it to “8” and see if that shows any improvement. Also make sure you enable XMP in your bios to up your ram speed from 2100 to whatever you paid for. It makes a world of difference and is as simple as going into your bios and just changing a drop down setting.
Did it, though ram speeds only increased to 2600mhz I got good results. Saw a 50fps increase so now it’s sitting at 260. I only have a 165hz monitor though so I can’t use it yet. Gonna have to swap out some parts in the future
@nolyfe4814 Nice! Solid gains! Should help a lot with 1% lows as well by having less stutters/frame drops!
That’s really strange to have such low speed with newer hardware like that. Is that older ram from a previous build? I’d try to find a part number on the ram sticks themselves and see if the rated speed is actually that low.
@@brandonnine 🤔 naw I mean I had a pre build but I’ve been swapping out parts over the past year. The only part I didn’t replace was the ssd. The ram, mother board, cpu, and case came from micro center. I got the ram free cause I bought a bundle. It’s a the g skill rip jaws.
Bought a 4070 and psu last month, also some fans.
@nolyfe4814 Yeah, I highly doubt they’d give you 2600mhz ram even if it was for free. I think it’d be worth double checking the part number from the invoice or on the ram sticks themselves and see what they are supposed to be. Usually 3200mhz is the standard for those ram bundles.
im getting 200+ fps with these settings but im getting packet burst and random crashes
I’ve been seeing a lot of people (including myself) getting packet burst and random crashes regardless of the settings. Hoping they come out with some updates to address it soon. I’ll be retesting everything in a week or so once they get a couple patches out.
I fixed my packet burst by buying an NVMe.. my game was on a old hard drive. Not even an ssd..
I was running Mw3 at 165 fps then I updated my graphics card now it runs at 80 fps can anyone help???
Do you mean you updated your drivers for your graphics card or actually replaced the card?
That little fps it cost you to set texture to normal insted of low i so little in preformace and it just looks dogshit when having everything to low.
Correct. Unless you don’t have enough vram on your gpu, then running on normal can cause significant performance losses and stutters.
Or you don't run the game at all and you get the max frame rate from your monitor
slow down, why such a rush in this :(
I’ve had people tell me I ramble and take too long so I’m still trying to find a happy medium 😅 I appreciate the feedback! @boffe1k