I can confirm this, only a falcon is still alive to this day after a reflow, the rest of the 360s that i had died, now i'm trying to bring back to life a console with the blades dashboard, wish me luck
I also did the heat gun method back in the day. It will work for a while then fail again, I can guarantee that! The only way to properly fix this is to re-ball the CPU and GPU with a higher quality solder.
You're right there. l just wanted to see if l could get it running again. l will come back to this and do try and do it properly, im just not 100% with my soldering skills yet, but l give it ago, fingers crossed 🤞
Great work and good thing that you bought the xclamps. Sadly this is not a fix, there is no "reflowing GPU" at RROD, because it's a flip chip fail. You need to swap the GPU with a compatible fixed revision, or GPU mod it. Great work eitherway!
@@FR4M3Sharma GPU mod is when you use a Fixed GPU on older board. It needs some changes on the board and software, but it's been done before. Xenon is the Hardest to do
I will have to come back to this at some point again as it is more of a temporary fix there are a couple of more things l wanna do to this Xbox 360 thank you for watching and your in put it's much appreciated 👍
After watching these vids from as far back as thirteen years you would think there would be one that showed the correct way to fix these monstrosities. Heating up the board oh yea.
I will be coming back to this heating the board only works for so long then stops working again but I'll done some more research and order some more parts to fry and sort it for good fingers crossed 🤞 and thank you for watching
I wish you would able to fix my Xbox 360 Fat lol. Mine will only read games when horizontal and sometimes the disc tray comes out and sometimes not. It’s really dusty from the inside since mine was manufactured in 2007 and sometimes it will turn off out of nowhere and sometimes not
Yeah, l will be coming back to this xbox one because it has stopped working, and secondly my skill and confidence are a lot better now with practice as time as gone on and thank for watching it's much appreciated 😃
You are right there, l will come back to this as I'm learning and improving my kills on a proper fixs I've got a new gpu + new resistors for it and thank for your input it is appreciated 😀
This is only a temporary fix, it’ll RROD again. The GPU needs replaced entirely
@@FR4M3Sharma I noticed that too, or he doesn’t know how to replace them. I can’t myself lol
What if the gpu is fine?? I have heard that solder ball can be the problem in 2005-07 models!!
@@saadtunio709 no, I bet it’s the GPU underfill. That’s usually always the problem especially if it’s 0102
I can confirm this, only a falcon is still alive to this day after a reflow, the rest of the 360s that i had died, now i'm trying to bring back to life a console with the blades dashboard, wish me luck
@@RATHERGAMER I’ve found many my friend. Thanks for joining the search
Sweet and relaxing video!
Thank you 😄
I also did the heat gun method back in the day. It will work for a while then fail again, I can guarantee that! The only way to properly fix this is to re-ball the CPU and GPU with a higher quality solder.
You're right there. l just wanted to see if l could get it running again. l will come back to this and do try and do it properly, im just not 100% with my soldering skills yet, but l give it ago, fingers crossed 🤞
re-ball same result! CPU doesn't need to be touched, but GPU has a bad Underfill and needs replacement
Great work and good thing that you bought the xclamps. Sadly this is not a fix, there is no "reflowing GPU" at RROD, because it's a flip chip fail. You need to swap the GPU with a compatible fixed revision, or GPU mod it. Great work eitherway!
Thank you for your in put it's much appreciated 👍 l will come back to this as l do wanna keep it and will change the GPU and thank you for watching 😃
What's the GPU Mod?
@@FR4M3Sharma GPU mod is when you use a Fixed GPU on older board. It needs some changes on the board and software, but it's been done before. Xenon is the Hardest to do
what about all the blown capacitors?
I will have to come back to this at some point again as it is more of a temporary fix there are a couple of more things l wanna do to this Xbox 360 thank you for watching and your in put it's much appreciated 👍
@@techrestoread I appreciate your honesty
So, those capacitors with the dried electrolyte volcano's on top? Not worth changing them?
I will be coming back to it again
You're not the only one to see those caps and cringe. Any leaking or bulging electrolytic cap means you need to replace ALL electrolytic caps!
@@markray3263 If you're not qualified, don't touch it!
Awesome. Good job🎉
Thank you much appreciated 😃
After watching these vids from as far back as thirteen years you would think there would be one that showed the correct way to fix these monstrosities. Heating up the board oh yea.
I will be coming back to this heating the board only works for so long then stops working again but I'll done some more research and order some more parts to fry and sort it for good fingers crossed 🤞 and thank you for watching
I wish you would able to fix my Xbox 360 Fat lol. Mine will only read games when horizontal and sometimes the disc tray comes out and sometimes not. It’s really dusty from the inside since mine was manufactured in 2007 and sometimes it will turn off out of nowhere and sometimes not
Sorry, l can't help. This is just a hobby for me. I've not had people send me in stuff before. Thank you for watching it's much appreciated 😃
Bro doesn't replace the 8 blown capacitors. Its a wonder that thing even turns on
Yeah, l will be coming back to this xbox one because it has stopped working, and secondly my skill and confidence are a lot better now with practice as time as gone on and thank for watching it's much appreciated 😃
Hey, I got a question how do you restore the online system? Because I need my Internet back do I need to replace a software
I'm not 100% sure I'm sorry l can't help you there. All l would do is Google it and hope you work it out
This is the xenon version
1: Capacitors has exploded. 2: Reball both of chips.
I am coming back to it as it done work any more and thank you for watching 😃
Not even a proper bolt mod. JUST NUTS.
NOT EVEN A PUN. LITERALLY JUST NUTS.
this is temporary fix, console will RROD again after mounth. T H E G P U K A P U T
You are right there, l will come back to this as I'm learning and improving my kills on a proper fixs I've got a new gpu + new resistors for it and thank for your input it is appreciated 😀
Promo-SM