New toy for the 1200!!!!!!.....Vintage MF24 Chisel Plough

Been looking out for one of these for a while and finally get my hands on a MF24 Chisel Plough. An essential bit of kit for the back of the 1200.
Music from You Tube Audio Library:
Glory Be by Patrick Patrikios
Banjo Hop by Audionautix
Banjo Hop by Audionautix is licensed under a Creative Commons Attribution 4.0 licence. creativecommon...
Artist: audionautix.com/

[@eamondempsey3018]

Nice find there Cathal. The 1200 and chisel plough are an iconic pair. Great to get one with the wheels. Everything else is replaceable.

[@FlyingFergyMan]

Thanks Eamon 👍 Will look good on the back of the 1200 if I can get it squared up ok.

[@gearsandtears7643]

Very nice addition to the 1200

[@FlyingFergyMan]

Thanks, hopefully look good if I can get it squared up a bit👍

[@gearsandtears7643]

@@FlyingFergyMan ye as you said strip it and start with bare metal

[@MarkSpry-s5s]

Great tool they are even now!

[@FlyingFergyMan]

Thanks 👍 Yes 1200 and Chisel plough great combo

[@AgrimotiveFarmMachinery]

That's the job for the 1200 Cathal. It will compliment it perfectly. Looking forward to seeing your skills at sand blasting and spray painting.. Great video as always.

[@FlyingFergyMan]

Thanks Alan👍 Hopefully we can get it squared up without too much hassle.

[@nickhill3362]

That will look well better than them little disc's 👍recon I would enjoy pulling that with my 1250 😁

[@FlyingFergyMan]

Thanks, Disc's back in the hedge 👍🤣

[@paulthompson8467]

Good video your chisel plough would be rather unusual here in Ni looking forward to seeing it restored PS am sure you are pleased to see the better weather 👍

[@FlyingFergyMan]

Thanks Paul. Yes especially up my way as very little tillage here. County Down men might know how to drive it better. 😁👍

[@stephennesbitt8337]

Excellent video again.. you could have called for a cup of tea as you were on my doorstep, always look forward to seeing the Massey stuff 👍

[@FlyingFergyMan]

Thanks Stephen, next time.👍👍👍

[@multipower617]

Ferguson reaper, not seen one for years, then bought one and seen that one in the video all in the same week

[@FlyingFergyMan]

Thats very typical, or sods law!!

[@MasseyDave]

Cheers for the shout outs 👍❤️ have fun fixing the 24 up 👍👍👍

[@FlyingFergyMan]

Cheers Dave, if I can get it looking like Mikes i would be very happy with that.👍👍

[@MasseyDave]

@@FlyingFergyMan I didn’t do mikes , I just collected it for him 👍

[@williambowman7589]

Brilliant 👍

[@FlyingFergyMan]

Thanks William.👍

[@philipjmcloughlin5880]

Good video will be very nice on the 1200👍

[@FlyingFergyMan]

Thanks Philip, will look good on 1200 if I can get it squared up. 👍

[@Gearoid35]

Good video Cathal, some view, where the mountains of Mourne sweeps down to the sea, good luck with the chisel plough.

[@FlyingFergyMan]

Thanks Gearoid 👍. Lovely part of the world there.

[@Gearoid35]

@@FlyingFergyMan I'm due a trip up there

[@spudhauler]

You'll soon have that chisel plough looking the part with the plans you've got for it.👍after seeing the 135 at Dave's coming together will it make you think about doing the cab on your 165?

[@FlyingFergyMan]

Thanks Spudhauler, Id love to get the cab finished on the 165, have all the bits just no time, hopefully get it done once the 1200 and her toys are out of the way.👍👍

[@danielcunningham5052]

I say you should use it, it would be a great yoke for aerating ground, just set it not too deep

[@FlyingFergyMan]

Thanks, never thought about that Daniel 👍

[@casto-]

Ahh more scrap 😉as you say, lick of paint and a few new bits and it’ll look well at the show behind the 1200👌should make her bark a bit as well 😁

[@FlyingFergyMan]

Very Possible Casto, hopefully get it squared up and looking well. Id love to see how she handles it.

[@casto-]

@@FlyingFergyMan think we’re all looking forward to seeing how she does 😁😊

[@swblandyman]

Is that the same as a Bomford Superflow? Dooh, I should have watched all the video before asking the question

[@FlyingFergyMan]

Yes its identical, I believe Bomford actually made them and they were painted MF red with MF badges.

[@abbiejones1843]

Be nice behind the 1200 painted red with MF . decals on it .

[@FlyingFergyMan]

Yes Abbie, just need the time to square it up!!!😁🤞

[@joeinglis132]

I would say there call points

[@FlyingFergyMan]

Thanks Joe, I thought I was calling them by the wrong name.👍👍🤦‍♂🤦‍♂

[@beyondnow1600]

That wasn't the Ballybanan road at the start of the video near Castlewellan by any chance? Great video as usual.

[@FlyingFergyMan]

I’m not sure the name of the road as the sat nav was driving😂 but it was down that direction 👍

[@beyondnow1600]

@FlyingFergyMan yeah the veiw was very familiar as I'm only 16miles from there. That was a long journey for you though, all the way from the north Antrim coast to the south Down coast.

[@78mikehayes]

First. Proud moment

[@spudhauler]

Certainly on a roll with these firsts. 👍👏👏

[@78mikehayes]

@@spudhaulerbabysitting has considerably increased my winning streak

[@spudhauler]

​@@78mikehayes 👍🤣🤣

[@FlyingFergyMan]

The benefits of baby sitting Mike.😁😁

[@martinblack1296]

We're do you come from

[@FlyingFergyMan]

Glens of Antrim Martin👍

[@aaronringland6251]

I presume around the Dundrum area

[@FlyingFergyMan]

Yes Aaron down that direction.

[@johnprendergast3173]

Ah now Cathal, made my day with the Zetor in the background!!!

[@FlyingFergyMan]

You dont see many Zetors on my channel lol

[@johnprendergast3173]

@@FlyingFergyMan Makes it more special Cathal!!

[@FlyingFergyMan]

@@johnprendergast3173 If you are a Zetor man, Alan over on the Agrimotive Farm Machinery Channel done a great vid on Zetors a few months back.

[@johnprendergast3173]

@@FlyingFergyMan Actually touched base with Alan a few weeks ago Cathal. Really good video on the Zetor Crystal 8011. Maybe you know but JT’s barn n grill is excellent Cathal, he is doing up his Massey 1800 at the moment, with all the other MF's he owns.....

[@FlyingFergyMan]

@@johnprendergast3173 ill take a look at that Channel, sounds interesting.👍👍