How did you get your bell to work? Ijust got a td-11kv and I'm really frustrated that I can't get the bell to work after the extra cash I spent. Any helpful tips would be greatly appreciated.
Press the link button and that will separate the zones then hit a zone and dial in your sound, continue with the other two zones without hitting the other zone !
Also make sure under System/Pad Settings that RD is set to CY-13R so it will utilize both jacks instead of just one input for the CY-8 that the kit comes with
I just got myself a TD17 KVX. When I plug in the ride cymbal connections in the correct order that is the RDB jack to the bell input and the RD jack to the edge input of the CY13R, the cymbal seems to get self chocked. The entire cymbal sounds chocked and like a piece of rubber with minimum cymbal like sound. But when I reverse the input jacks in the incorrect order, the cymbal sounds fine but the edge and bell zones are reversed. Almost the entire cymbal triggers the bell and only a tiny portion of it triggers the edge. Even in the assignment section when I hit the bell of the cymbal, the Cymbal assignment screen shows RDE making it even impossible to correct the assignment. Has anyone faced this weird issue before? Can someone help to find a way out?
Hello Mainak, I just bought my TD17-KVX last month and I'm also facing the same issue you had with the CY-13R ride cymbal. Have you managed to resolve it?
@@damien9869 Hi... I did write about this issue in a few Roland forums but didn't receive much help there. But the issue miraculously disappeared. 😀😀😀 All I did was, I stopped using the sounds from TD17 as there were issues like the ride cymbal's bell & edge zones inversion plus I didn't like any of the snare or kick tones provided in the module. So I started using GGD tones using MIDI and there I could map and play the ride cymbals the proper way. This went for a few months, then one fine day I just thought of creating a tone in TD17 itself and while doing that I just tried to test my luck and re-plugged the ride cymbal jacks in their correct order and to my wonder I found that the issue has disappeared and I could correctly assign my ride bell and edge. Although it sounds way better using GGD while playing via MIDI.
@@mainakdutta8588 Thanks Mainak! In the end, it turned out to be a manufacturing defect & since it was still under warranty, i got my local Roland distributor to fix it. Fortunately it's been working well since.
Hi Richie. I have a question for you. I recently purchased a used TD11KV kit. It came with a CY13R ride. I do not like the sound of the crash/edge when struck, too harsh for me. Is it possible to program the crash sound of the ride? If so, how? I'd like it be like a 18" fast crash, or something along those lines? Thanks, Ron.
hi..thanks for the video. The problem Im having is the sustain on my ride(td25kv)..I tried bringit down , it helps a little bit but if Im doing a live gig over speakers the sustain seems to overcome eveything. I've tried the level, gain etc...I just can;t seem to get it right. Any suggestions.
Hello, I'm from Brazil, and I have a td 11 k in my church, and I bought a cy 13 r but I can not configure the bell mode of it, I only get the edge and the blow. Would you be able to guide me on this? I was scared to have bought wrong, because in the specification does not say that it is for the td 11k. And now? The cy 13 r has 3 zones but in the module I can not configure the 3 zones. I only get two zones, the bell I can not.
Yes it should work perfectly with your td-11 module. Make sure under System/Pad Settings that RD is set to CY-13R so it will utilize both jacks instead of just one input for the CY-8 that the kit comes with
Oi Felipe, tudo bem ? Vc conseguiu resolver seu problema? Estou com o mesmo problema, meu bell não funciona. Obg caso consiga responder estou no Instagram como marcio bangao. Abs
Hey Richie. I just bought this cymbal and I’m using it with a TD6V module. However, when I have both cables plugged in and working, the bell seems to take over. It’s like there’s no separation from then triggers inside. Am I doing something wrong? Seems like this should work pretty well right outta the box. It seems like my cymbal is screwed up somehow. It was used when I bought it.
I have a td11k set and i was wanting to see if i can add the cy13r cymbal to it. How would connect it to the kit? Because there is another input in the snake called RDB would that go into the bell for the cy13r? Im confused. Please help
Richie Castellano ok so i would plug in the chord that is in the cymbal now that i use for the ride into the cy13r and the extra RDB chord for the bell? And if that is then what do i do for the crash cymbal that i was using for the ride before?
+Ryk Allyn Yes, I used the cymbal pad that was originally meant to be the ride as a second crash. Now I'm tapped out. I have Kick, Snare, 3 Toms, Hi hat, hi hat pedal, 2 crashes, ride, and ride bell. Now I'm completely full.
+Richie Castellano thanks richie...im really leaning towards this setup based on ur videos plus reviews ive watched....2 questions, 1 - when u guys play during podcast, does andy just use the roland preset kits or is there alot of tweaking needed? 2 - what did u use for ride mount? where do i get similar? thnx man!
Basically, i have a TD-11 and i bought the CY13R. I'm pretty sure that i plugged rd and rdb cables all correctly but my module does not recognise when i hit the bell. (Driver is downloaded too, please answer i really need some help :D)
How did you get your bell to work? Ijust got a td-11kv and I'm really frustrated that I can't get the bell to work after the extra cash I spent. Any helpful tips would be greatly appreciated.
Press the link button and that will separate the zones then hit a zone and dial in your sound, continue with the other two zones without hitting the other zone !
Also make sure under System/Pad Settings that RD is set to CY-13R so it will utilize both jacks instead of just one input for the CY-8 that the kit comes with
I have the td11k and am looking to pick up the cy12 crash for $100... did you ever get it to work right??
the td-11module has a 'link' function in the instrument edit section - you should 'unlink' in order to get three not two trigger areas
THANK YOU FOR THIS!!!
@@coltonwatters9800
My CY13R invert zone BELL to EDGE ...? Reset not function..
Hi! can I use this cymbal with a TD-07 KVS kit?
I just got myself a TD17 KVX. When I plug in the ride cymbal connections in the correct order that is the RDB jack to the bell input and the RD jack to the edge input of the CY13R, the cymbal seems to get self chocked. The entire cymbal sounds chocked and like a piece of rubber with minimum cymbal like sound. But when I reverse the input jacks in the incorrect order, the cymbal sounds fine but the edge and bell zones are reversed. Almost the entire cymbal triggers the bell and only a tiny portion of it triggers the edge. Even in the assignment section when I hit the bell of the cymbal, the Cymbal assignment screen shows RDE making it even impossible to correct the assignment.
Has anyone faced this weird issue before? Can someone help to find a way out?
Hello Mainak, I just bought my TD17-KVX last month and I'm also facing the same issue you had with the CY-13R ride cymbal. Have you managed to resolve it?
Wow, that's no good
@@damien9869 Hi... I did write about this issue in a few Roland forums but didn't receive much help there. But the issue miraculously disappeared. 😀😀😀 All I did was, I stopped using the sounds from TD17 as there were issues like the ride cymbal's bell & edge zones inversion plus I didn't like any of the snare or kick tones provided in the module. So I started using GGD tones using MIDI and there I could map and play the ride cymbals the proper way. This went for a few months, then one fine day I just thought of creating a tone in TD17 itself and while doing that I just tried to test my luck and re-plugged the ride cymbal jacks in their correct order and to my wonder I found that the issue has disappeared and I could correctly assign my ride bell and edge. Although it sounds way better using GGD while playing via MIDI.
@@mainakdutta8588 Thanks Mainak! In the end, it turned out to be a manufacturing defect & since it was still under warranty, i got my local Roland distributor to fix it. Fortunately it's been working well since.
Does it use with Roland TD4 ? Thank you
probably not
Can I use this with my TD-1DMK if I use a splitter? Because my drumkit has only 1 output for the ride cymbal.
Does Roland TD11K supports three sounds of CY-13R? Does Roland TD11K supports threezone cymbal?
ThEnEwBrOwNsOuNd yes
Hi Richie. I have a question for you. I recently purchased a used TD11KV kit. It came with a CY13R ride. I do not like the sound of the crash/edge when struck, too harsh for me. Is it possible to program the crash sound of the ride? If so, how? I'd like it be like a 18" fast crash, or something along those lines? Thanks, Ron.
would 3 zones would work on the td1dmk if i replace the cy5? would the bell would work?
Does it work properly on my tdk9?
Thanks for sharing. Do you know if I can use this cymbal with the TD-3 brain ?
hi..thanks for the video. The problem Im having is the sustain on my ride(td25kv)..I tried bringit down , it helps a little bit but if Im doing a live gig over speakers the sustain seems to overcome eveything. I've tried the level, gain etc...I just can;t seem to get it right. Any suggestions.
Did you find a fix for this? I am having the same problem.
Hello,
I'm from Brazil, and I have a td 11 k in my church, and I bought a cy 13 r but I can not configure the bell mode of it, I only get the edge and the blow. Would you be able to guide me on this? I was scared to have bought wrong, because in the specification does not say that it is for the td 11k. And now?
The cy 13 r has 3 zones but in the module I can not configure the 3 zones. I only get two zones, the bell I can not.
Yes it should work perfectly with your td-11 module. Make sure under System/Pad Settings that RD is set to CY-13R so it will utilize both jacks instead of just one input for the CY-8 that the kit comes with
Oi Felipe, tudo bem ? Vc conseguiu resolver seu problema? Estou com o mesmo problema, meu bell não funciona. Obg caso consiga responder estou no Instagram como marcio bangao. Abs
@@coltonwatters9800 I’m using TD-07kv, what cables do i need to have to setup my CY13r? I have a spare C2 cable
Hey Richie. I just bought this cymbal and I’m using it with a TD6V module. However, when I have both cables plugged in and working, the bell seems to take over. It’s like there’s no separation from then triggers inside. Am I doing something wrong? Seems like this should work pretty well right outta the box. It seems like my cymbal is screwed up somehow. It was used when I bought it.
I have the same problem on my td6v but it happens when I plug in anything into the ride jack. I think it’s just the module
hi if the module has a 'link' function in the instrument edit section you should apparantly 'unlink' in order to get three not two trigger areas
I have a td11k set and i was wanting to see if i can add the cy13r cymbal to it. How would connect it to the kit? Because there is another input in the snake called RDB would that go into the bell for the cy13r? Im confused. Please help
There are 2 output jacks on the CY13R. On if for the ride and on is for the bell.
Richie Castellano ok so i would plug in the chord that is in the cymbal now that i use for the ride into the cy13r and the extra RDB chord for the bell? And if that is then what do i do for the crash cymbal that i was using for the ride before?
Charles Keens the wiring harness for the TD11 already had an extra cable on it for the ride bell
Ok so i use that for the cy13r...then what other plug do i use cor the 2nd output?
Charles Keens, does Roland TD11K supports threezone cymbal? If yes, how? Witch wich cable?
when u added the ride, did u have enuff inputs on the brain or did something have to go?
+Ryk Allyn Yes, I used the cymbal pad that was originally meant to be the ride as a second crash. Now I'm tapped out. I have Kick, Snare, 3 Toms, Hi hat, hi hat pedal, 2 crashes, ride, and ride bell. Now I'm completely full.
+Richie Castellano thanks richie...im really leaning towards this setup based on ur videos plus reviews ive watched....2 questions, 1 - when u guys play during podcast, does andy just use the roland preset kits or is there alot of tweaking needed? 2 - what did u use for ride mount? where do i get similar? thnx man!
looks like its been put into good use nice demo stick marks=rugged
Richie Castellano can i ask you something ? No worries im not like ThEnEwBrOwNsOuNd lol :D
Basically, i have a TD-11 and i bought the CY13R. I'm pretty sure that i plugged rd and rdb cables all correctly but my module does not recognise when i hit the bell. (Driver is downloaded too, please answer i really need some help :D)
RECEP DEMİR Try changing some of the trigger settings. Maybe that will help
Thanks!