Rep ones when they come out. I have a fixed set and was actually thinking about downgrading to an adjustable set to save space, but a fixed set is hard to move away from.
adjustable kettlebells. (BofS has the smallest increments). Most people only use KB's for 1 or 2 exercises so it doesn't make sense to to buy a whole set for most people). And IMHO the handle solutions of different companies don't work for most KB exercises. (the feel is wrong, esp for clean/rack/press.)
Iron master are some of the best feeling and most durable adjustable dumbbells. The changing weights is was kinda makes them annoying, but they make up with that with space savings.
Main issue is making massive weight jumps, but I just bought another set for that. Actually have 3 now on their cart with their kettle bell handles. Pretty epic.
Ironmaster vs Powerblock was probably the single biggest rivalry in home gyms for a couple of decades. But choosing was really more simple than people made it out to be. If you wanted something most like real dumbbells that would last forever you got the Ironmasters. If you wanted quick changes you went with Powerblocks. I went with Powerblocks and ten years later I have not regretted it. No way would I spend $700+ on some of these new options that are full of plastic parts that are practically guaranteed to break at some point. Thanks for mentioning that these are made in Taiwan. That is an important distinction that more people should care about.
I appreciate the review sir. It basically confirms some suspicions I've had after about 5 weeks of ownership and use of my Snode AD80's. I did a moderate amount of homework on different adjustable dumbbell options and was persuaded away from the Ironmaster's in favor of quicker-adjusting ones like the AD80's, which I chose over Nuobells because of durability. I'm satisfied with my AD80's but there are a couple annoyances that these Ironmasters address, which I did not know would be quite as important to me. 1) flat bottom; the AD80's don't feel great on the thighs when setting up on a bench. This was accidentally solved by platemates' rubberized donut magnets, but those are an additional cost to gain 2.5-5lb increments. 2) I did not realize quite how much the physical length of the dumbbells would influence movements of exercises that bring the ends of the dumbbells together, like db chest presses or even deadlifts. They end up being held more like a barbell in the squat and deadlifts and they keep the hands from coming as close to each other as you'd expect they would in the chest press. 3) I don't think I properly valued the speed of adjustment. In my case, my time is extremely limited so I do CURRENTLY think the AD80's are a good option just because they DO adjust faster and are my only source of weight resistance until the rack and barbell/plates can be purchased, so I do have to factor in the speed of weight changes when moving between vastly different exercises. If I had thought a little further ahead and how they would eventually combine with a rack and barbell, I think the Ironmaster's would've been a fine choice if not better choice since most (if not all?) of my big weight-change exercises would be between barbell and dumbbell and not solely done on the dumbbell.
I just got the 75lb ironmaster quicklock set two months ago, and I love them. They are pretty quick to adjust once you get the hang of it, and they feel super solid. I was going back and forth between all kind of adjustable DB’s, and even thought about getting a full set, but I’m glad I went with these. I took a lot of peoples advice and got the Titan Fitness dumbbell stand and plate tree and it works perfect for them.
I got the titan stand too with 75lb iornmaster. Honestly switching out weight isn't so bad, takes pretty much 1 min. The size is what I like most, very compact. I put the heavy handles and at 90lb each it's more than I can do with one hand.
I just ordered these with the heavy handle kit and I'm stoked! Can't believe I waited so long to add these to my home gym, truly a great investment that will last forever. I took advantage of their first responders discount. I plan on adding the super bench and some attachment from their "ecosystem". I don't have much room in my basement so this looks like it will be superb! Thanks for reviewing and God less sir.
I've had these dumbbells for a few years and they are built like a tank, easily my most versatile home gym purchase. You get faster at changing them as you get practice but it is the biggest drawback for things like drop sets. I have found they work pretty well also on any standard 1" barbell for additional exercise variety.
@@sportsgenius91 They have decent knurling and the steel handles feels much closer to a traditional dumbbell than the rubber handles some powerblocks have. I also like that the ironmasters don't rattle like the powerblocks; it feels like a minor thing but I find the noise distracting during lifting with powerblocks.
@SolarSamurai24 while the Powerblocks are more convenient, I think the ironmasters are better. I thought I would like the convenience but the rattling messes up my muscle/mind connection lol. Also, a big draw back is you can't do overhead tricep extensions with powerblocks! I love that exercise lol
Great review. I own the PB Pro series with the stage 2 and 3 add ons. I have had them for a little over a year and used them 5 days a week. You hit it right on the head when you say its a “love/hate” relationship. That is probably true with most adjustable dumbbells I would guess. I appreciate all the time you put in to all this. Thanks so much.
Bought the heavy handle set last year...love the ironmasters. I have some power blocks too (those are nice for the accessories 50lbs and under, the ironmasters are my go to for benching/RDLs/whatever I'm doing over 100lbs). Short of dropping 4 grand on regular dumbbells, this has been a pretty perfect solution for me.
My wife gifted me the bowflex 5-52.5 lb dumbells and they were my only set for years. I just found a cool mate from a different state that sold me these and now I can go from 5lb - 135lb in steps of 0.25 lb which is just insane! Even the new REP X Pepins max out at 125lb. Also, I personally prioritize a solid feel over quicker adjustments for 2 reasons: 1 - With heavy loads I want all my concentration on the exercise, not the dumbell. 2 - When I am exhausted, sideloading 70lb is a little easier than trying to align a 70lb weight into a baseplate.
Thanks for the review Gluck! I think I'm going to get these to supplement my fixed dumbbells. I have a 5-100lb set, but above 100lbs (before that really) the rubber hex dumbbells get huge and take up serious real estate. Having the Iron Masters for anything above 100 would be a massive money and space savings. And going up to 180lbs in that smaller foot print is beyond amazing.
Great company. Free shipping and usually have some really good discounts. I got a great veterans discount when I purchased mine. I bought the 180 lbs dumbells. Started out with the initial set, then got the two upgrade sets and the two inner handle attachments. The weights also are interchangeable with the kettlebell and curlbar. I usually only go up to about 150 lbs for flat bench and have dropped these on the floor quite a few times and have never had any issues. So, these things are super durable. Downside is the more weight you have on these the longer it takes to switch out to a different weight. Going from 150 lb flat to 120 lb incline is a pain with the extended fully threaded screws. Also, if you have the inner additional weights, they cut into your wrists sometimes. But, if you use wrist straps you don't need to worry about that.
Have them since 2015, Never had a problem with them even with the 120lbs upgrade. Yes they are slower to change, but they can be dropped from bench height all day long. Saves a ton of space also. Next would be to have the heavy handle kit.
Thanks for keeping the videos going man! I really love them, idk how you do the magic, but I can tell there's a lot of effort into the vids. I'll use your links sometime in the future whenever I get a reasonable windfall!
My hat is off to Ironmaster for supporting military and first responders by offering a 10% discount. Not many companies do that anymore. Rep use to give a 5% discount but they quietly took it away.
I just posted this as a reply to satrianirocks, but I thought it might be better as a general comment concerning possible loosening of the Ironmaster dumbbells. I have the Ironmaster dumbbells (120 lbs) plus the kettle bell handle (80 lbs). They are awesome. Ironmasters lock up tight. The locking screws themselves do not unscrew or come loose on their own. Dropping Ironmaster dumbbells can produce enough jarring force to nestle plates into each other a little more. Screws do not unwind and the plates will not come off the handle. However, the small re-positioning of plates allows the screws to twist a little further into the handle. Making the screws taut with the plates will make the dumbbells even more solid than before they were dropped. Part of the magic, durability and safety of the Ironmasters comes from the handle and plates resting slightly inside each other. There is no way for the plates to spin the threads back toward the release notch. You are safe as long as locking screws are tightened at least 1/4 turn away from the release notch. Screws do not require excessive tightening to lock tight and be safe. The nesting of handles and plates contribute to Ironmaster durability: With the plates and handle locked into each other, they also rest ON each other. The handle and plates themselves help lift, support and manage impacts as a unit, in addition to the locking screws. When dropped, they land in / on each other such that the locking screws don't take all the abuse. All the best!
Hope u can review the Eisenlink Adjustable dumbbells or the IFast Hex Adjustable dumbbells in the future. They're surprisingly similar to each other and offer a slightly more affordable alternative to the Ironmasters.
Thanks for the review. I'm still debating what adjustable dumbbells to buy. I was looking at the trulap but still making up my mind. You made it that much harder. Smile
Best investment I made for my home gym several years back before covid and home gym. Prior to that had the old 45lb Sport blocks that did the job, but when I saw the Iron Masters they were just solid. The time it takes to swap is minimal once you get used to doing it. Also the best thing about these is that the kettle bell and the vest all use the same square weights and its just no brainer if you're going that route too, all are solid. Great review.
I've got them up to the 120. I got standard dumbells up to 65 so I just use them for heavy stuff. They work pretty good, I don't mind the extra length too much, but I didn't realize they had the heavy handle kit to make it smaller. Might buy that just to make it feel closer to a normal dumbell.
The way Ironmaster pitches these weight numbers is so misleading, that I hate it. Do you have Ironmaster dumbells up to 120lbs PER dumbell or 120lbs total for 2 dumbells? That would mean 60lbs per dumbell.
I love my fixed dumbbells but this new gym is too small. I'm gonna have to bite the bullet and get an adjustable pair and I have no idea which ones to get. All I know right now is I hate powerblocks. I checked out the new REP ones but honestly they disappointed me, really want to see your review on them Great Job again Man
@@GlucksGym They remind me of the Nordic track ones and the Nordic's look cheap with a lot of plastic. I don't know anything about REP's, just saw a pic of them and a drop test by a REP employee. Needless to say those type reviews or tests done by the maker of the product mean nothing. I cant wait until your review on them so I can see if they are any good or not but I was not impressed with the pic of them. You know REP is my favorite company so I'm hoping I am wrong
I love my Ironmasters! I bought the 120lb set for $875 new- before The Coronapocolypse, and that useless table-like stand was inculded. There is a noticeable difference when changing the weight to where you need to use the upgrade kit. That's when you have to remove all of the 5's and start over with the 22.5 blocks, then add the 5's thereafter. For that, I keep that base weight at 70lbs (including the heavy handle kit) and use Powerblocks to get me from 5 to 70lbs.
Iron Master quick locks were my first fitness item. I still use them in my full home gym for weights above 50 pounds as well as in between 2.5 pound weights.
Great video man!! IMs are great for going heavy, still prefer fixed dumbbells but these are a great alternative if you lack the space. Your review blew mine away in views within hours compared to mine which has been out for a few months 😂
I like it! If they really are that durable, it's something I might buy one day when I'm rich. For now, standard 25mm adjustable dumbbell handles are just fine.
Finally! A product that I own. Started with used bowflex 552s and these are so much better. Nothing much to add about the main narrative. Pricing on spare handles for supersets seems steep and if you workout in a damp garage rust might be a small problem but they’re solid and will out last me. Kettlebell handle works very well too. Print out a plate-math table or use the “thinking” time to bulk out your workout duration…
Ironmaster make really good heavy duty home equipment. I have most of their products including DB’s, superbench pro, numerous attachments and the IM2000 which does so much in a compact design.
Have the Iron masters that I bought in 2007 and I purchased the 120lb upgrade in 2008. The price has jumped a lot...in 2008 the add on kit was 200.00 and now it is 400.00. With that said Ironmasters are just bulletproof. The kettlebells are great. Overall a great system that you can build on and build up over time. Curl bar is just okay.
I have the Ironmaster with the heavy handle kit, 120lbs expansion kit, and kettlebell handle and I'll be honest, i'd take them over an equivalent set of fixed dumbbells. They're that good. Zero wiggle, smaller handle, quick enough to change, small footprint in the garage.
I love my Ironmaster 2000. As far as adjustable dumb bells I went with bowflex with the stand . It is so much easier and quicker to adjust the weight .
One of my benches is from Ironmaster, I bought it when I had to build a NYC gym that fit into a closet. That being said, I went with Pepin for db. Something about the Ironmaster's being square made them incompatible with my brain, I suspect I'm bias because I trained for about a decade. The Pepins IMHO, most resemble what you would find in a commercial gym and make me feel like I have a complete set. For what I paid for them though, I probably could have owned a complete set of used DBs.
I got these in 120s. I was disappointe initially because of the longer handle makes it feel funny and would use 5-10lb less on most lifts. Added the heavy handle kit and that fixed everything for me. Love em. I got plate mates and they mate perfectly to the Iron Master screw.
Trying to upgrade my PowerBlock Sport 50’s. I have never been so torn.. Powerblock Pro EXP, or these! I want both! Maybe it’s marketing but I feel like these don’t get appeal they deserve. The ecosystem might be the deciding factor for me. Great review!!!
Love my Iron Master quick locks. Been using my buddy’s home gym and he uses power blocks. The power blocks are better than expected. But love Quicklocks more. Unfortunately the space for our home gym isn’t ready and probably 6 months out. So the iron masters won’t get use til then
I have the Bowflex 552s and have had them for 6 years. If they had been around, I would have gone with something like the Nuobell/Snode design. I briefly tried the Powerblocks but could not stand the pin "rerack" as you said. I was looking at the Pepin Fast Dumbbells earlier this year, but ultimately I changed my program instead and now I no longer am outgrowing the 52.5lbs of the 552s. I did buy the microgainz 1.25 and 2.5 sets though to help. I am concerned that if I buy the 80lb max adjustables, then I'd only last a few years before I ran out of room again. That would be why I would want to go with 120 max of the Pepins, because I will NEVER outgrow those. I work out with my fiancee, so speed is the biggest factor for us as we swap between weights.
I have tried spinlocks (take too long), Nuobell clones (seem fragile and are easily misaligned in the craddle) and some old school powerblocks. Have to say, Powerblocks seem the best if you dont have to drop the weights - best combo of durability, feel, ease of use, quick change and price. Iron masters seem like a great option if you need weights that are heavier than 90 pounds and highly durable.
Yep I came to that conclusion over 10 years ago. I have actually dropped my Powerblocks (U-90s) because over the years unintentional stuff happens. They handled it fine, but I wouldn't recommend it. My main gripe is the rubber handles. I think I'll replace them with Average Joe stainless handles. Should last me the rest of my life. But if I needed even more durability and/or heavier weight, Ironmasters would be at the top of my list.
I can't say that my Nuobells are fragile. Used them multiple times a week for 3 years and still look identical to the day I bought them. That said, I heavily leaned towards Iron Masters when I was in the market, and the only reason I didn't go with them is because they had awful availability for so long during/after COVID.
@@steverapos3904 I could see how they could, if you don't have a cradle for them. I didn't purchase the first party cradle, but bought a generic adjustable dumbbell holder from Titan and it's tilted at like 15 degrees, which makes putting the weights back in easier, because you can modestly wedge the back stack distal a bit as you set the dumbbells in the cradle, ensuring they catch the little cutouts and seat correctly. I will say, while I've never dropped the dumbbells (and at 80 lb max, I'm not sure why you ever would need to), I DO think that inner fixed half-plate would crack relatively easily with even a moderately jarring drop.
@@BM-si2ei They are fragile, though. Look up Average Joe's Nuobell Teardown. They rely on cheap plastic cam followers to move the shafts in and out. When they break, which almost certainly only a matter of time, they can't be repaired. Not acceptable for the price, IMO.
I recently bought these for my home gym. I like the way they feel, but if I'm being honest, part of me regrets not getting something that adjusts more quickly. I was lured in by the durability, but the ability to change weight quickly was also important to me and these are not quick at all. They might be slightly faster than traditional loadable dumbbells, but not by much. Powerblock and Rep make durable products also and they can be adjusted almost instantly. That being said, Powerblocks are massive when you load them up. Rep adjustables aren't massive but I'm pretty sure they're bigger than Ironmasters at heavier weights. Another thing to consider is noise when loading dumbbells. For most people it's a non-factor, but if you live in a smaller place and have a baby or you're trying to stay quiet, adjusting the Ironmasters slowly and carefully will take up a lot more time than you think. Just some food for thought. Figure out your priorities before you buy. Edit: I change my mind. After using them for a few months now, I've concluded that they're actually slower to adjust than traditional loadable dumbbells. The name of this product is extremely misleading. It doesn't lock any quicker than a collar. It's actually slower to lock by design because you have to get the notches lined up correctly, whereas with a regular collar you don't have to.
I had a bit of a dumbbell journey myself. Started on with U90 powerblocks and loved the versatility but they always felt awkward. No matter what weight or movement and i used them for over 6 years. I finally decided to make the switch to Ironmaster and loved the feeling. They feel exactly like a regular dumbbell, solid and no rattling whatsoever. But, as you mentioned, they are a hassle to change, especially coming from something super quick. So, I did what any sane home gym owner would do, bought a pair of Nuobells! So now I have Ironmasters that go up to 120lbs and 80lb Nuobell's for quick change. I think it's the best of both worlds. Nuobells are for warm up and super sets and Ironmasters are for my straight sets.
I had a Nuobell and sold it. now I have trulap and Ironmaster. I'm selling the Ironmaster tomorrow. I leave the dumbbells from trulap. ironmasters are not quick to change weight
I know this is old but were you changing them with the dumbbells sitting flat? I don't know how you could say it takes just as long as a regular loadable dumbbell - the plates sit perfect side by side and the quick lock is super fast. Not sure how you could think it wasn't fast once the weight was actually in place. The problem with taking so long to change the weight is really an issue of the stand being so small. I got the large 24x24 pro stand and it's got enough space to keep the plates all on top. Changing from the smallest increment to the largest (which would rarely happen in real life) probably takes 30 seconds a dumbbell. Changing from say 55 pounds to 65 pounds (more realistic) probably takes around 15 seconds a dumbbell. When the weights are right in front of you it's a very fast process.
@@ryanleal1764 I use them on carpet so the plates don’t stay upright if I use that technique. But either way you could do exactly what you described with any loadable dumbbell, so it’s not unique to Ironmaster. I disagree about the need to change weights in larger increments. If you’re trying to superset back and biceps or something similar then you would. Even without supersets, you might do full body routines daily with only two sets per muscle and change more often than is typical. But yeah, either way, quality dumbbells with a great feel in the hands but slow as hell to adjust.
I'm looking to get some Adjustable dumbbells on Black Friday so Gluck you got to tell me the best ones to get, you know I always use your affiliate links so make sure the ones you tell me to get are from one of your affiliates. LOL BTW, just saw your question to me on REP's quickdraw's. I left answer there and it is that they looked kinda cheap but what do I know, I've never liked any adj. dumbbells but I have no choice now since I'm in a much smaller gym. Waiting on your review and I hope they are great because you know REP is my favorite company Take Care Gluck and Wynie
I'll do my best to get my hands on them and beat on them some. We'll see how it goes but we're growing our adjustable collection so hopefully the reviews help even if they're not an affiliate 😊
Yep, being standard sized you can use them with other things. Of course you could probably argue if they were Olympic size you could use your existing plates but standard size stuff is pretty cheap.
I saw that quick little shot of the Freak Athlete Nordic Hyper equipment. When is that review coming out? I’ve got mine on order but won’t be here until end of December. But can’t wait!
I have the PB Pro Exp with the Average Joe 40mm stainless steel handles. Six seconds each side to change weights. I love them! These Ironmasters look even less convenient than my former Yes4All spin locks, which took about a minute each side to change weights.
I plan to buy them when I finish my 5-100lb fixed dumbbells sets. I want the ironmaster for 105 and up and for another set of dumbbells if I'm working out with someone
I'm in a similar situation, except I want to use the IM to go from 70 and up. I think for now I'm going with the regular set and heavy handle set. If they have a sale though I may also grab the 120lb upgrade kit. I was looking at the pepin set, but that set is just too pricey, has a huge lead time, and not sure how I feel about the side support pieces.
How timely. REP just dropped their teaser for the Quickdraw adjustable dumbbells which is almost like combining Nuobell and Pepin Fast Series. What are your thoughts? Also can you review the Pepin PRO/HD series?
They have another set coming that goes up to 120 lbs. It looks like the base just holds the weights because much like Nuobell (and similar ones) you need to align the plates so they slot together but I've seen them do drop sets and re-align the plates outside of the cradle.
With the handles were cheaper, I would get a pair to work with my regular standard plates instead of the spin locks. Have a whole lot of 1.5s, 2.5s, 5s, 10s, and a couple 12.5s. Make up three sets ahead of time and good to go. But the quick lock handles would be cool.
12:27 Wait... that's a thing that exists? Well now. I've browsed their website a few times and never noticed that attachment (probably because it isn't obvious what it does at a glance), but it's exactly what I needed from an adjustable dumbbell ecosystem.
They probably discontinued it when they added the straight bar to the lineup, seeing as it does the same thing (i.e. use your existing quick-lock dumbbell plates on a barbell) for $20 less, not including the cost of a separate bar. Edit: I just checked the site again, and these do actually still exist under "accessories," although I stand by just getting the straight bar instead.
@@gpearce11 Thing is, I eventually went with the Zipro option (similar concept, but about 1/3 of the price for the same weights). I was still going to buy that accessory, but it's just slightly too small to fit my barbell/dumbbells, which is a real shame - it would have enabled me to pack a lot more weight onto the bar with a rigid frame, rather than rely on more DIY solutions. Also, I disagree that their barbell does the same thing as this accessory - the barbell they sell is fairly limited in terms of max weight and there are plenty of lifters that want to pull heavier loads, which this enables. It's a more niche use-case, but it very much exists. Lastly, the only thing I still want from Ironmaster is one of their vests, but they've been out of stock for about 9 months on the EU storefront, last time I checked. I ran the numbers and shopped around online for days, but it's still the best option for my plates (they're 0.5 cm larger, but should still fit). Ironmaster makes great products, but for the EU market the added cost on their EU storefront really brings its appeal down, especially for those of us in Eastern Europe, where it's damn hard to justify spending >2k EUR on weights that would cost me ~800 EUR if opting for Zipro/Eisenlink/etc, both systems looking similarly sturdy and full-metal.
I would like to see a comparison and find out what your favorite adjustable dumbbells are. People seem to think the new Pepins are the best (although they are pricey).
@@Pler1978 yeah a lot of people feel that way about the cage. Personally, I had powerblocks and got used to it, doesn't bug me and I actually think they feel more balanced because the weight sort of wraps around your hand a bit
A pair of the iron master 120 lbs for $650 or a pair of 90 lbs powerblocks with a rep fitness incline bench for $550? I got to drive 3 hours one way for the iron masters but the PBs are probably 20 minutes away.
Awesome thanks for the response! I come here for all the reviews and the “edutainment” . Thanks for making my workouts meta…(watching EQ reviews as I workout haha)
IronMaster has been around a very long time for a good reason, they are very tough and extremely fictional. Only a full rack of pro-style dumbbells can beat the feel of IronMaster. Their compact design beat the “feel” of any other adjustable dumbbell. Their biggest drawback is always stated as slow changing time, but realistically that change time is less than most people’s rest periods. The shortest rest periods are usually in drop sets, removing weight of off IronMasters is much quicker than putting on. Basically the change time debate is overrated and the solid, compact, usability of IronMaster just feels better.
I have the powerblock pro 100s (the hammer strength version). Changing the weight is not quick at all - that's mostly on me, I always put it in the wrong hole. I do drop them from seated height once in a while and cringe every time because it sounds terribly loud and break-y, but so far no issues.
IM use to be my go-to dumbbells till I got a fully stainless steel knurled handles for my Powerblocks, from AverageJoes and not the official OEM from PB. Lol maybe do a review of all the knurled grips you can buy for PBs 😂. Jk.. Probably too niche of an add-on. But then again, PB is technically older I believe than IM so... Crap ton of people have PBs since they've been around for ages.
Ironmasters are the only adjustable dumbbells that feel like fixed dumbbells (in my experience). However, I don't like using them for lower weight exercises (anything
My method is pretty rudamentry. It's that I have 2 sets of adjustable olympic dumbells (one set 20 inches and one 16 inches) and a bunch of 10s, 5s, and real collars. It works as I will get plates as I am able to, but it gets the job done. Also, when are you ever going to do a drop set that's not more than 2 dumbells. Rarely
Hey Gluck👋 So I’m on Craig’s List looking for a rack, and it looks like someone is selling a Power Systems Power Rack for just over $500. The seller seems to just sell reclaimed commercial gym equipment. Do you know anything about Power Systems?
I love my ironmasters. I'm currently trying to take myself out of buying another pair. I mean, you need a set for 55+ and a pair for less than 55, right? I absolutely load in 2.5 lb increments. Yeah you can feel the difference, but it's negligible.
I've had Nuobells for three years. They're like new and I've had no problem using them multiple times a week because I'm not a bonehead and i take care of them.
I have Two pairs of IronMasters, why am I watching this 😂. The ecosystem is great tho, if you own the dumbbells and get the vest, it’s the cheapest vest you could buy and the max weight on the vest is the heaviest I’ve seen.
You really want to wait for next week's video. It's our biggest and best one ever and will tell you EVERYTHING about bumpers. Seriously, this one's been done before 😈
@@GlucksGym Ok so changé weights on thé floor it's not a problem. I would like to get thé IM dbells and skip thé stand to save money. Thanks for thé south of France 😉
I had a 120lb set for years along with the bench. Never really liked them and glad they are gone. Way too slow to change. Bench is ok, but compared to adjustable benches available now I don’t see why anyone would go with Ironmaster.
Which adjustable dumbbells should we check out next?
Lol the Pepin Fast Dumbbells $$$$
Kensui Adjustabell
trulap gen 2
Rep ones when they come out. I have a fixed set and was actually thinking about downgrading to an adjustable set to save space, but a fixed set is hard to move away from.
adjustable kettlebells. (BofS has the smallest increments). Most people only use KB's for 1 or 2 exercises so it doesn't make sense to to buy a whole set for most people). And IMHO the handle solutions of different companies don't work for most KB exercises. (the feel is wrong, esp for clean/rack/press.)
Iron master are some of the best feeling and most durable adjustable dumbbells. The changing weights is was kinda makes them annoying, but they make up with that with space savings.
Yes I always kind of considered them glorified spin locks. But there is certainly more to a quality dumbbell than how quickly they change.
Main issue is making massive weight jumps, but I just bought another set for that. Actually have 3 now on their cart with their kettle bell handles. Pretty epic.
I’ve had mine since 2014. Still working great.
I’ve had my set along with the kettlebell attachments for 5 years and they continue to impress me. I love them!
Ironmaster vs Powerblock was probably the single biggest rivalry in home gyms for a couple of decades. But choosing was really more simple than people made it out to be. If you wanted something most like real dumbbells that would last forever you got the Ironmasters. If you wanted quick changes you went with Powerblocks. I went with Powerblocks and ten years later I have not regretted it. No way would I spend $700+ on some of these new options that are full of plastic parts that are practically guaranteed to break at some point. Thanks for mentioning that these are made in Taiwan. That is an important distinction that more people should care about.
It's being 700+ with plastic is madness, and I thought iornmaster was expensive
I appreciate the review sir. It basically confirms some suspicions I've had after about 5 weeks of ownership and use of my Snode AD80's. I did a moderate amount of homework on different adjustable dumbbell options and was persuaded away from the Ironmaster's in favor of quicker-adjusting ones like the AD80's, which I chose over Nuobells because of durability. I'm satisfied with my AD80's but there are a couple annoyances that these Ironmasters address, which I did not know would be quite as important to me. 1) flat bottom; the AD80's don't feel great on the thighs when setting up on a bench. This was accidentally solved by platemates' rubberized donut magnets, but those are an additional cost to gain 2.5-5lb increments. 2) I did not realize quite how much the physical length of the dumbbells would influence movements of exercises that bring the ends of the dumbbells together, like db chest presses or even deadlifts. They end up being held more like a barbell in the squat and deadlifts and they keep the hands from coming as close to each other as you'd expect they would in the chest press. 3) I don't think I properly valued the speed of adjustment. In my case, my time is extremely limited so I do CURRENTLY think the AD80's are a good option just because they DO adjust faster and are my only source of weight resistance until the rack and barbell/plates can be purchased, so I do have to factor in the speed of weight changes when moving between vastly different exercises. If I had thought a little further ahead and how they would eventually combine with a rack and barbell, I think the Ironmaster's would've been a fine choice if not better choice since most (if not all?) of my big weight-change exercises would be between barbell and dumbbell and not solely done on the dumbbell.
I just got the 75lb ironmaster quicklock set two months ago, and I love them. They are pretty quick to adjust once you get the hang of it, and they feel super solid. I was going back and forth between all kind of adjustable DB’s, and even thought about getting a full set, but I’m glad I went with these. I took a lot of peoples advice and got the Titan Fitness dumbbell stand and plate tree and it works perfect for them.
I got the titan stand too with 75lb iornmaster.
Honestly switching out weight isn't so bad, takes pretty much 1 min.
The size is what I like most, very compact.
I put the heavy handles and at 90lb each it's more than I can do with one hand.
I just ordered these with the heavy handle kit and I'm stoked! Can't believe I waited so long to add these to my home gym, truly a great investment that will last forever. I took advantage of their first responders discount. I plan on adding the super bench and some attachment from their "ecosystem". I don't have much room in my basement so this looks like it will be superb! Thanks for reviewing and God less sir.
I've had these dumbbells for a few years and they are built like a tank, easily my most versatile home gym purchase. You get faster at changing them as you get practice but it is the biggest drawback for things like drop sets. I have found they work pretty well also on any standard 1" barbell for additional exercise variety.
How is the grip? I have powerblocks and they don't feel like a dumbell.
@@sportsgenius91 They have decent knurling and the steel handles feels much closer to a traditional dumbbell than the rubber handles some powerblocks have. I also like that the ironmasters don't rattle like the powerblocks; it feels like a minor thing but I find the noise distracting during lifting with powerblocks.
@SolarSamurai24 while the Powerblocks are more convenient, I think the ironmasters are better. I thought I would like the convenience but the rattling messes up my muscle/mind connection lol. Also, a big draw back is you can't do overhead tricep extensions with powerblocks! I love that exercise lol
Great review. I own the PB Pro series with the stage 2 and 3 add ons. I have had them for a little over a year and used them 5 days a week. You hit it right on the head when you say its a “love/hate” relationship. That is probably true with most adjustable dumbbells I would guess. I appreciate all the time you put in to all this. Thanks so much.
Bought the heavy handle set last year...love the ironmasters. I have some power blocks too (those are nice for the accessories 50lbs and under, the ironmasters are my go to for benching/RDLs/whatever I'm doing over 100lbs). Short of dropping 4 grand on regular dumbbells, this has been a pretty perfect solution for me.
I've been looking at these for a year now... They seem to be one of the few who aren't toys.
Nice to see a review!
My wife gifted me the bowflex 5-52.5 lb dumbells and they were my only set for years.
I just found a cool mate from a different state that sold me these and now I can go from 5lb - 135lb in steps of 0.25 lb which is just insane! Even the new REP X Pepins max out at 125lb. Also, I personally prioritize a solid feel over quicker adjustments for 2 reasons:
1 - With heavy loads I want all my concentration on the exercise, not the dumbell. 2 - When I am exhausted, sideloading 70lb is a little easier than trying to align a 70lb weight into a baseplate.
Thanks for the review Gluck! I think I'm going to get these to supplement my fixed dumbbells. I have a 5-100lb set, but above 100lbs (before that really) the rubber hex dumbbells get huge and take up serious real estate. Having the Iron Masters for anything above 100 would be a massive money and space savings. And going up to 180lbs in that smaller foot print is beyond amazing.
Another awesome review. Would love to see comparisons between the different adjustable options.
I'll work on my collection 😈
Great company. Free shipping and usually have some really good discounts. I got a great veterans discount when I purchased mine.
I bought the 180 lbs dumbells. Started out with the initial set, then got the two upgrade sets and the two inner handle attachments. The weights also are interchangeable with the kettlebell and curlbar.
I usually only go up to about 150 lbs for flat bench and have dropped these on the floor quite a few times and have never had any issues. So, these things are super durable.
Downside is the more weight you have on these the longer it takes to switch out to a different weight. Going from 150 lb flat to 120 lb incline is a pain with the extended fully threaded screws. Also, if you have the inner additional weights, they cut into your wrists sometimes. But, if you use wrist straps you don't need to worry about that.
I had the same problem. Bought some plate mates. Problem solved. Just have to change weights twice while doing chest or once.
Have them since 2015, Never had a problem with them even with the 120lbs upgrade. Yes they are slower to change, but they can be dropped from bench height all day long. Saves a ton of space also. Next would be to have the heavy handle kit.
This is the system I’ve been looking for. Thanks for this review. I will def use your link once I save the money I need for these 😂
I have the Nordic track adjustable dumbbells and I love them.
Thanks for keeping the videos going man! I really love them, idk how you do the magic, but I can tell there's a lot of effort into the vids. I'll use your links sometime in the future whenever I get a reasonable windfall!
Probably way too much effort in each video but here we are 😂 happy people notice and thanks for the support
My hat is off to Ironmaster for supporting military and first responders by offering a 10% discount. Not many companies do that anymore. Rep use to give a 5% discount but they quietly took it away.
that's awesome!
That’s lame 😂 and also unfair to others. Should just offer it to everyone or nobody
@@basilb2007they require physical fitness to serve their country. do you??
@@basilb2007a very small favour to people who put their life on the line to preserve your way of life.
Ironmaster has now quietly taken theirs away as well...
I just posted this as a reply to satrianirocks, but I thought it might be better as a general comment concerning possible loosening of the Ironmaster dumbbells.
I have the Ironmaster dumbbells (120 lbs) plus the kettle bell handle (80 lbs). They are awesome.
Ironmasters lock up tight. The locking screws themselves do not unscrew or come loose on their own.
Dropping Ironmaster dumbbells can produce enough jarring force to nestle plates into each other a little more. Screws do not unwind and the plates will not come off the handle. However, the small re-positioning of plates allows the screws to twist a little further into the handle. Making the screws taut with the plates will make the dumbbells even more solid than before they were dropped.
Part of the magic, durability and safety of the Ironmasters comes from the handle and plates resting slightly inside each other. There is no way for the plates to spin the threads back toward the release notch. You are safe as long as locking screws are tightened at least 1/4 turn away from the release notch. Screws do not require excessive tightening to lock tight and be safe.
The nesting of handles and plates contribute to Ironmaster durability: With the plates and handle locked into each other, they also rest ON each other. The handle and plates themselves help lift, support and manage impacts as a unit, in addition to the locking screws. When dropped, they land in / on each other such that the locking screws don't take all the abuse.
All the best!
What a thoughtful and kind suggestion
Hope u can review the Eisenlink Adjustable dumbbells or the IFast Hex Adjustable dumbbells in the future. They're surprisingly similar to each other and offer a slightly more affordable alternative to the Ironmasters.
Thanks for the review. I'm still debating what adjustable dumbbells to buy. I was looking at the trulap but still making up my mind. You made it that much harder. Smile
Hopefully we can help you in the long run 😃
Best investment I made for my home gym several years back before covid and home gym. Prior to that had the old 45lb Sport blocks that did the job, but when I saw the Iron Masters they were just solid. The time it takes to swap is minimal once you get used to doing it. Also the best thing about these is that the kettle bell and the vest all use the same square weights and its just no brainer if you're going that route too, all are solid. Great review.
I've got them up to the 120. I got standard dumbells up to 65 so I just use them for heavy stuff. They work pretty good, I don't mind the extra length too much, but I didn't realize they had the heavy handle kit to make it smaller. Might buy that just to make it feel closer to a normal dumbell.
The way Ironmaster pitches these weight numbers is so misleading, that I hate it. Do you have Ironmaster dumbells up to 120lbs PER dumbell or 120lbs total for 2 dumbells? That would mean 60lbs per dumbell.
@thesting6820 120 lb per dumbell.
@ Thanks for the feedback. These look so good that I'm going all the way. That means the heavy handle and the 165lbs add on.
I love my fixed dumbbells but this new gym is too small.
I'm gonna have to bite the bullet and get an adjustable pair and I have no idea which ones to get.
All I know right now is I hate powerblocks.
I checked out the new REP ones but honestly they disappointed me, really want to see your review on them
Great Job again Man
@@Pler1978
I think so too
What are you seeing that you don't like on Rep's Quick Draw's Bobby?
@@GlucksGym
They remind me of the Nordic track ones and the Nordic's look cheap with a lot of plastic.
I don't know anything about REP's, just saw a pic of them and a drop test by a REP employee.
Needless to say those type reviews or tests done by the maker of the product mean nothing.
I cant wait until your review on them so I can see if they are any good or not but I was not impressed with the pic of them. You know REP is my favorite company so I'm hoping I am wrong
I love my Ironmasters! I bought the 120lb set for $875 new- before The Coronapocolypse, and that useless table-like stand was inculded. There is a noticeable difference when changing the weight to where you need to use the upgrade kit. That's when you have to remove all of the 5's and start over with the 22.5 blocks, then add the 5's thereafter. For that, I keep that base weight at 70lbs (including the heavy handle kit) and use Powerblocks to get me from 5 to 70lbs.
Odd you'd call the stand useless. That's where mine live and it works great to get them out of the way and stored.
I've wanted a set of those for awhile and this only made me want them more
These really seem high end compared to the others Ive seen!
Iron Master quick locks were my first fitness item. I still use them in my full home gym for weights above 50 pounds as well as in between 2.5 pound weights.
I’ve had these for about ten years. Solid set!
Great video man!! IMs are great for going heavy, still prefer fixed dumbbells but these are a great alternative if you lack the space. Your review blew mine away in views within hours compared to mine which has been out for a few months 😂
hahaha thanks. Just put a few more years in and you may also be able to blow an entire week on a single video 😂
@@GlucksGym mine took about 16 hours 😂 all that B roll and filming/editing takes forever… at least your full time now!!
@@GoreckiFit isn't it crazy. You see a 14m video or whatever but it's days and days of work 😂😭
Lookn super swole in this vid. Whatever you're doing lately is working man. Good to see all that money on equipment hasn't only been for our benifit
😀 I probably just set the camera right for once 😂
I like it! If they really are that durable, it's something I might buy one day when I'm rich. For now, standard 25mm adjustable dumbbell handles are just fine.
Finally! A product that I own. Started with used bowflex 552s and these are so much better. Nothing much to add about the main narrative.
Pricing on spare handles for supersets seems steep and if you workout in a damp garage rust might be a small problem but they’re solid and will out last me.
Kettlebell handle works very well too.
Print out a plate-math table or use the “thinking” time to bulk out your workout duration…
Ironmaster make really good heavy duty home equipment. I have most of their products including DB’s, superbench pro, numerous attachments and the IM2000 which does so much in a compact design.
Well done!
Thanks!
Have the Iron masters that I bought in 2007 and I purchased the 120lb upgrade in 2008. The price has jumped a lot...in 2008 the add on kit was 200.00 and now it is 400.00. With that said Ironmasters are just bulletproof. The kettlebells are great. Overall a great system that you can build on and build up over time. Curl bar is just okay.
I have the Ironmaster with the heavy handle kit, 120lbs expansion kit, and kettlebell handle and I'll be honest, i'd take them over an equivalent set of fixed dumbbells. They're that good. Zero wiggle, smaller handle, quick enough to change, small footprint in the garage.
I bought the IMs for heavier work and I have baby hands so the heavy handle was a no brainer for me.
I love my Ironmaster 2000.
As far as adjustable dumb bells I went with bowflex with the stand . It is so much easier and quicker to adjust the weight .
One of my benches is from Ironmaster, I bought it when I had to build a NYC gym that fit into a closet. That being said, I went with Pepin for db. Something about the Ironmaster's being square made them incompatible with my brain, I suspect I'm bias because I trained for about a decade. The Pepins IMHO, most resemble what you would find in a commercial gym and make me feel like I have a complete set. For what I paid for them though, I probably could have owned a complete set of used DBs.
I got these in 120s. I was disappointe initially because of the longer handle makes it feel funny and would use 5-10lb less on most lifts.
Added the heavy handle kit and that fixed everything for me. Love em.
I got plate mates and they mate perfectly to the Iron Master screw.
Trying to upgrade my PowerBlock Sport 50’s. I have never been so torn.. Powerblock Pro EXP, or these!
I want both!
Maybe it’s marketing but I feel like these don’t get appeal they deserve. The ecosystem might be the deciding factor for me.
Great review!!!
Our PowerBlock Pro Exp review comes out next week. It may help you decide between.
Love my Iron Master quick locks. Been using my buddy’s home gym and he uses power blocks. The power blocks are better than expected. But love Quicklocks more. Unfortunately the space for our home gym isn’t ready and probably 6 months out. So the iron masters won’t get use til then
I have the Bowflex 552s and have had them for 6 years. If they had been around, I would have gone with something like the Nuobell/Snode design. I briefly tried the Powerblocks but could not stand the pin "rerack" as you said. I was looking at the Pepin Fast Dumbbells earlier this year, but ultimately I changed my program instead and now I no longer am outgrowing the 52.5lbs of the 552s. I did buy the microgainz 1.25 and 2.5 sets though to help. I am concerned that if I buy the 80lb max adjustables, then I'd only last a few years before I ran out of room again. That would be why I would want to go with 120 max of the Pepins, because I will NEVER outgrow those. I work out with my fiancee, so speed is the biggest factor for us as we swap between weights.
The Titan Dumbell stand is a great combo with these.
I have tried spinlocks (take too long), Nuobell clones (seem fragile and are easily misaligned in the craddle) and some old school powerblocks. Have to say, Powerblocks seem the best if you dont have to drop the weights - best combo of durability, feel, ease of use, quick change and price. Iron masters seem like a great option if you need weights that are heavier than 90 pounds and highly durable.
Yep I came to that conclusion over 10 years ago. I have actually dropped my Powerblocks (U-90s) because over the years unintentional stuff happens. They handled it fine, but I wouldn't recommend it. My main gripe is the rubber handles. I think I'll replace them with Average Joe stainless handles. Should last me the rest of my life. But if I needed even more durability and/or heavier weight, Ironmasters would be at the top of my list.
I can't say that my Nuobells are fragile. Used them multiple times a week for 3 years and still look identical to the day I bought them. That said, I heavily leaned towards Iron Masters when I was in the market, and the only reason I didn't go with them is because they had awful availability for so long during/after COVID.
@@BM-si2ei I have imitation Nuobells - might be the reason for the quality difference. Do yours mis-align easily when you return them to the cradle?
@@steverapos3904 I could see how they could, if you don't have a cradle for them. I didn't purchase the first party cradle, but bought a generic adjustable dumbbell holder from Titan and it's tilted at like 15 degrees, which makes putting the weights back in easier, because you can modestly wedge the back stack distal a bit as you set the dumbbells in the cradle, ensuring they catch the little cutouts and seat correctly.
I will say, while I've never dropped the dumbbells (and at 80 lb max, I'm not sure why you ever would need to), I DO think that inner fixed half-plate would crack relatively easily with even a moderately jarring drop.
@@BM-si2ei They are fragile, though. Look up Average Joe's Nuobell Teardown. They rely on cheap plastic cam followers to move the shafts in and out. When they break, which almost certainly only a matter of time, they can't be repaired. Not acceptable for the price, IMO.
I recently bought these for my home gym. I like the way they feel, but if I'm being honest, part of me regrets not getting something that adjusts more quickly. I was lured in by the durability, but the ability to change weight quickly was also important to me and these are not quick at all. They might be slightly faster than traditional loadable dumbbells, but not by much. Powerblock and Rep make durable products also and they can be adjusted almost instantly. That being said, Powerblocks are massive when you load them up. Rep adjustables aren't massive but I'm pretty sure they're bigger than Ironmasters at heavier weights. Another thing to consider is noise when loading dumbbells. For most people it's a non-factor, but if you live in a smaller place and have a baby or you're trying to stay quiet, adjusting the Ironmasters slowly and carefully will take up a lot more time than you think. Just some food for thought. Figure out your priorities before you buy.
Edit: I change my mind. After using them for a few months now, I've concluded that they're actually slower to adjust than traditional loadable dumbbells. The name of this product is extremely misleading. It doesn't lock any quicker than a collar. It's actually slower to lock by design because you have to get the notches lined up correctly, whereas with a regular collar you don't have to.
I had a bit of a dumbbell journey myself. Started on with U90 powerblocks and loved the versatility but they always felt awkward. No matter what weight or movement and i used them for over 6 years. I finally decided to make the switch to Ironmaster and loved the feeling. They feel exactly like a regular dumbbell, solid and no rattling whatsoever. But, as you mentioned, they are a hassle to change, especially coming from something super quick. So, I did what any sane home gym owner would do, bought a pair of Nuobells! So now I have Ironmasters that go up to 120lbs and 80lb Nuobell's for quick change. I think it's the best of both worlds. Nuobells are for warm up and super sets and Ironmasters are for my straight sets.
I had a Nuobell and sold it. now I have trulap and Ironmaster. I'm selling the Ironmaster tomorrow. I leave the dumbbells from trulap. ironmasters are not quick to change weight
I know this is old but were you changing them with the dumbbells sitting flat? I don't know how you could say it takes just as long as a regular loadable dumbbell - the plates sit perfect side by side and the quick lock is super fast. Not sure how you could think it wasn't fast once the weight was actually in place. The problem with taking so long to change the weight is really an issue of the stand being so small. I got the large 24x24 pro stand and it's got enough space to keep the plates all on top. Changing from the smallest increment to the largest (which would rarely happen in real life) probably takes 30 seconds a dumbbell. Changing from say 55 pounds to 65 pounds (more realistic) probably takes around 15 seconds a dumbbell. When the weights are right in front of you it's a very fast process.
thank you，almost buy one.Changing speed is very important,we all want to have the using experience like formal dumbbell,more slowly more tiresome
@@ryanleal1764 I use them on carpet so the plates don’t stay upright if I use that technique. But either way you could do exactly what you described with any loadable dumbbell, so it’s not unique to Ironmaster. I disagree about the need to change weights in larger increments. If you’re trying to superset back and biceps or something similar then you would. Even without supersets, you might do full body routines daily with only two sets per muscle and change more often than is typical. But yeah, either way, quality dumbbells with a great feel in the hands but slow as hell to adjust.
I'm looking to get some Adjustable dumbbells on Black Friday so Gluck you got to tell me the best ones to get, you know I always use your affiliate links so make sure the ones you tell me to get are from one of your affiliates. LOL
BTW, just saw your question to me on REP's quickdraw's. I left answer there and it is that they looked kinda cheap but what do I know, I've never liked any adj. dumbbells but I have no choice now since I'm in a much smaller gym.
Waiting on your review and I hope they are great because you know REP is my favorite company
Take Care Gluck and Wynie
I'll do my best to get my hands on them and beat on them some. We'll see how it goes but we're growing our adjustable collection so hopefully the reviews help even if they're not an affiliate 😊
@@GlucksGym
Thnkx Man
What makes these dope is that the weights fit 1” standard fitting which works out well for my reality fitness cable machine
Yep, being standard sized you can use them with other things. Of course you could probably argue if they were Olympic size you could use your existing plates but standard size stuff is pretty cheap.
I saw that quick little shot of the Freak Athlete Nordic Hyper equipment. When is that review coming out? I’ve got mine on order but won’t be here until end of December. But can’t wait!
It'll be out in 2 weeks or so. Good eyes 👀
Excellent review- thank you.
Thanks 😊
I liked the bit about the bicep curls 😆
Who said it was a bit...
I have the PB Pro Exp with the Average Joe 40mm stainless steel handles. Six seconds each side to change weights. I love them! These Ironmasters look even less convenient than my former Yes4All spin locks, which took about a minute each side to change weights.
I plan to buy them when I finish my 5-100lb fixed dumbbells sets. I want the ironmaster for 105 and up and for another set of dumbbells if I'm working out with someone
I'm in a similar situation, except I want to use the IM to go from 70 and up. I think for now I'm going with the regular set and heavy handle set. If they have a sale though I may also grab the 120lb upgrade kit. I was looking at the pepin set, but that set is just too pricey, has a huge lead time, and not sure how I feel about the side support pieces.
0:18 Freak Athlete Nordic Hyper GHD just slipped right in there 🧐🧐🧐
Good eyes. That review is coming soon 😉
Good review!
How timely. REP just dropped their teaser for the Quickdraw adjustable dumbbells which is almost like combining Nuobell and Pepin Fast Series. What are your thoughts? Also can you review the Pepin PRO/HD series?
Interesting take. Care to elaborate?
They look interesting but still appear to require a plastic base and only go up to 60 pounds. Non starter for me.
They have another set coming that goes up to 120 lbs. It looks like the base just holds the weights because much like Nuobell (and similar ones) you need to align the plates so they slot together but I've seen them do drop sets and re-align the plates outside of the cradle.
@@plmn93they said on Instagram a heavy set is coming out
@@GlucksGymdo you know the release timing of the 120s?
Never gonna buy these but I keep watching your reviews for entertainment value and I'm also addicted to buying gym equipment 😂
thanks for the video
With the handles were cheaper, I would get a pair to work with my regular standard plates instead of the spin locks. Have a whole lot of 1.5s, 2.5s, 5s, 10s, and a couple 12.5s. Make up three sets ahead of time and good to go. But the quick lock handles would be cool.
Would be cool if you can vlog a workout with these!
12:27 Wait... that's a thing that exists? Well now. I've browsed their website a few times and never noticed that attachment (probably because it isn't obvious what it does at a glance), but it's exactly what I needed from an adjustable dumbbell ecosystem.
They probably discontinued it when they added the straight bar to the lineup, seeing as it does the same thing (i.e. use your existing quick-lock dumbbell plates on a barbell) for $20 less, not including the cost of a separate bar.
Edit: I just checked the site again, and these do actually still exist under "accessories," although I stand by just getting the straight bar instead.
@@gpearce11 Thing is, I eventually went with the Zipro option (similar concept, but about 1/3 of the price for the same weights).
I was still going to buy that accessory, but it's just slightly too small to fit my barbell/dumbbells, which is a real shame - it would have enabled me to pack a lot more weight onto the bar with a rigid frame, rather than rely on more DIY solutions.
Also, I disagree that their barbell does the same thing as this accessory - the barbell they sell is fairly limited in terms of max weight and there are plenty of lifters that want to pull heavier loads, which this enables. It's a more niche use-case, but it very much exists.
Lastly, the only thing I still want from Ironmaster is one of their vests, but they've been out of stock for about 9 months on the EU storefront, last time I checked. I ran the numbers and shopped around online for days, but it's still the best option for my plates (they're 0.5 cm larger, but should still fit).
Ironmaster makes great products, but for the EU market the added cost on their EU storefront really brings its appeal down, especially for those of us in Eastern Europe, where it's damn hard to justify spending >2k EUR on weights that would cost me ~800 EUR if opting for Zipro/Eisenlink/etc, both systems looking similarly sturdy and full-metal.
Iron master or powerblock pro exp which you will choose for best all around for you?
I would like to see a comparison and find out what your favorite adjustable dumbbells are. People seem to think the new Pepins are the best (although they are pricey).
@@Pler1978 yeah a lot of people feel that way about the cage. Personally, I had powerblocks and got used to it, doesn't bug me and I actually think they feel more balanced because the weight sort of wraps around your hand a bit
Interested to check them out at Home Gym Con this year.
Thank you for this info. Will the Kensui 2" plates fit well on these with the Kensui 2" adapters?
A pair of the iron master 120 lbs for $650 or a pair of 90 lbs powerblocks with a rep fitness incline bench for $550? I got to drive 3 hours one way for the iron masters but the PBs are probably 20 minutes away.
powerblock it ia a block not Dumbbells if you like minecraft go for it)
Just started a workout with my Ironmasters and this pops up on my feed! 😂 Thanks Gluck 🎉
I'm not watching you 👀
If I wanted to purchase the extra weight would that still count towards your affiliate links?
@@paulkeesling7786 I think you can buy anything they sell with my link and it should count
Awesome thanks for the response! I come here for all the reviews and the “edutainment” . Thanks for making my workouts meta…(watching EQ reviews as I workout haha)
@@paulkeesling7786 happy someone is enjoying the vids! Thanks for the support, it mens a lot!
IronMaster has been around a very long time for a good reason, they are very tough and extremely fictional. Only a full rack of pro-style dumbbells can beat the feel of IronMaster. Their compact design beat the “feel” of any other adjustable dumbbell. Their biggest drawback is always stated as slow changing time, but realistically that change time is less than most people’s rest periods. The shortest rest periods are usually in drop sets, removing weight of off IronMasters is much quicker than putting on. Basically the change time debate is overrated and the solid, compact, usability of IronMaster just feels better.
these look awesome
I have the powerblock pro 100s (the hammer strength version). Changing the weight is not quick at all - that's mostly on me, I always put it in the wrong hole. I do drop them from seated height once in a while and cringe every time because it sounds terribly loud and break-y, but so far no issues.
I can't believe I missed a wrong hole joke in this video when talking about powerblocks...
IM use to be my go-to dumbbells till I got a fully stainless steel knurled handles for my Powerblocks, from AverageJoes and not the official OEM from PB.
Lol maybe do a review of all the knurled grips you can buy for PBs 😂. Jk.. Probably too niche of an add-on. But then again, PB is technically older I believe than IM so... Crap ton of people have PBs since they've been around for ages.
What size did you get? I'm leaning towards 35mm.
Ironmasters are the only adjustable dumbbells that feel like fixed dumbbells (in my experience). However, I don't like using them for lower weight exercises (anything
Correct, though mine do sit pretty tight at 10lbs even with the pins meeting in the middle.
I am lucky that 2 of my hands fit on one handle. 😅 Can close grip deadlift- Erm I mean CURL. 💪 With the Ironmasters
Two handed curl on the Ironmasters... now we're talking! I didn't think of it as a barbell!
My method is pretty rudamentry. It's that I have 2 sets of adjustable olympic dumbells (one set 20 inches and one 16 inches) and a bunch of 10s, 5s, and real collars. It works as I will get plates as I am able to, but it gets the job done. Also, when are you ever going to do a drop set that's not more than 2 dumbells. Rarely
Anyone have experience with the new metal kensui adjustabells ?
On another subject do you like the rep fitness animal print bumper plates more than the fringe?
Huge bumper vid coming out Thursday. That'll answer any bumper questions you could ever have 😈
Great review but How about a review for the Snode ad80
I'm getting there 😂 I'll get it done
Would be awesome to see a Pepin fast series DB review/comparison
I was talking with them about one but I guess they decided they might've had enough coverage with after they sent some to GGR and Brandon
The Pepin’s look like they avoid the disadvantages of both Iromasters and PowerBlocks, but they are not cheap.@@GlucksGym
About time
Hey Gluck👋
So I’m on Craig’s List looking for a rack, and it looks like someone is selling a Power Systems Power Rack for just over $500. The seller seems to just sell reclaimed commercial gym equipment. Do you know anything about Power Systems?
Review the Havak triads please.
I love my ironmasters. I'm currently trying to take myself out of buying another pair. I mean, you need a set for 55+ and a pair for less than 55, right?
I absolutely load in 2.5 lb increments. Yeah you can feel the difference, but it's negligible.
Yea, I have done that too. If I move my hand closer to the heavy side it feels fine.
I want these so bad, but my wife would kill me, lol.
I've had Nuobells for three years. They're like new and I've had no problem using them multiple times a week because I'm not a bonehead and i take care of them.
I have Two pairs of IronMasters, why am I watching this 😂. The ecosystem is great tho, if you own the dumbbells and get the vest, it’s the cheapest vest you could buy and the max weight on the vest is the heaviest I’ve seen.
They probably should have made the innermost plates just a hair larger so they act as a jack for the other plates.
What bench is that that you're using?
Titan’s dumbbell stand works great for these
Looking swole Gluck. Did you get bigger or did your shirt get smaller?
The shirt is the same size 😁
Great video. In your option, what would you spend €$800 on today
Im getting some weight plates, between rogue echo bumper and titan urethane which one you chose?( if it’s the same price)
You really want to wait for next week's video. It's our biggest and best one ever and will tell you EVERYTHING about bumpers. Seriously, this one's been done before 😈
165 or 180 per hand is nice but how long do they get?
They are 23.5" long at 165/180 lb
@@GlucksGymseems pretty reasonable
I would like to get IM dbells, should i also get the stand ? thanks
We don't have the stand so I can't really help you there. Sorry.
@@GlucksGym Ok so changé weights on thé floor it's not a problem. I would like to get thé IM dbells and skip thé stand to save money. Thanks for thé south of France 😉
Will you review reps latest release when it drops
I'll be the one dropping it! Get it???
I had a 120lb set for years along with the bench. Never really liked them and glad they are gone. Way too slow to change. Bench is ok, but compared to adjustable benches available now I don’t see why anyone would go with Ironmaster.
Curls are the best movement 5ever!
Curls get the girls
This guy gets it