I"m back in Canada. See the new vid 'Delivery of Bomag RS950 in Mississauga ON'. Picked up the new action cam + head mount at the post office. Will do unboxing video with some testing Saturday May 30th. Have a good weekend, everybody!
Someone was asking about the tracks. Track 1 is called DRIVEN TO MADNESS. Track 2 is THOR'S HAMMER. Both are from RUclips audio library. Thx 4 watchin'-
In all my years of trucking I have never loaded at CMI and I live just east of Okie City in Choctaw, Ok. So it was really cool to see somebody getting a load out of there. I don't know who gets the bulk of their freight but pretty sure it ain't Landstar. I'm stuck up here in Fargo, ND looking for something that doesn't suck. Happy trails back to the Canook.
I lucked out and got a load to Stockton, California plus a partial so really got lucky. I will wink at the California babes for ya, if I see any. Happy trails.
No pressure reading on the tires because they are filled with water, that's why you see that big pipe cap instead of a air valve. You turn the tire until that cap is to the top and fill with water.... Also, '20 ply' is just that, the tires are built with 20 plies (layers) of material. Safe travels.
las347 From what I understand. Water is the better choice for 'raw' land working vehicles (most if not all farm tractor tires are filled with water)... Extra weight (the extra weight is at the lowest part of the machine, less likely to tip), when they roll over big objects the tires can compress and widen at ground contact (the water fills the top section of the tire/wheel and stops the tire from going flat to the rim). I'm sure there is more reasons. I would bet they were filled with water when Uncle Sergei picked up the machine, so that could have been extra weight of water of round/about 1 ton he was moving just in water.
Watched in HD. Very cool intro, vibrant picture, and skilled editing. I am becoming addicted to Heavy Haul TV. I like the D rings back at the boom trough opening. That arrangement allows better options for tying down. Much better than the early 2000's Load King I used to haul with.
It is like a huge roto tiler. No water on the tips, those are hardened steel so they can grind up asphalt or regular dirt where they are laying asphalt for a parking lot or highway. They put lime down and then you can use it to mix the lime in the dirt.
That is an expensive machine they use them for grinding asphalt it mixes up the asphalt with the road base they pack it with rollers and put new asphalt on top.
Its a pulverizer. It is used for building roads or recycling and redoing roads buy grinding the old asphalt into the base material under it Then they compact it grade it and resurface.
Yup Pulverizer, I operated them for 10 years for a Ontario company that owend a fleet of these 8 or 9. CMI was bought up by many companys, fuck Bomag .This guys on glue if he thinks a C27(newer) or a 3412cat motor is quiet
Hey Sergi, I've watched almost all of your videos, even set through the commercials so you'll get rich and I must say, I'm hooked. I like the description of Canadian use of that machine, makes sense to me. I was surprised that it has 950 HP, but then it is a huge machine. That looks like a huge rotor tiller, maybe you have huge gardens in Canada. If you get a chance, I'd like to see a shot under the skirt of that monster, you know do an upskirt shot!!!!!.
pitty missed buying the fender covers at Joplin truck stop that would have covered your 3rd axle , cheaper I would think in the USA compaired to here in canada. Thanks for the vid, and had me laughing at revenge use
Have you not seen the Bomag RS951 Mark 2 it will tear up those drives in 2 seconds flat, and they have stealth mode built in, so the kid can be real Ninja when he's out at night!!
I definitely see why you got into heavy haul...very interesting loads you get sometimes. Makes your job that much more interesting. By the way thank you for the different camera angles.
las347 yeah, it's a bit different from pulling a dry van. 'Driver? Back to Dock 3'; Driver? You're all set'. most of the time you're very removed from the load in the back. when you work with steps, flats or floats, you get a hands-on experience with the load. while pulling this thing from OK, i saw people staring at the machine. a couple of guys came over and snapped pictures ("I wanna show it to my buddy..."). I felt like a hero ;)
hi uncle Sergei nice video ,your black Mack with that yellow Bomag on the back looked amazing. I hear there's been heavy rain and flooding in Oklahoma and Texas. It looked quite bad on TV, stay safe.
Awesome vid, and of corse I like the music on , good job, if u don't mind Sergei, can u talk and show more about tie down job, how many chain on the load and why etc. I wanna learn about it more, actually I'm working on flatdeck but just a regular deck with regular job. Thank You, n' drive safe
Well that is a great machine , you are a card the stories you can tell are very far fetched . nice music Sergei . good luck have a safe trip and we will see you on Canadian soil next time . .
What a B.S. story. You must be an Uncle Remus story teller for truckers. That machine is for road rebuilding. It is like a combine for a grain farmer. One machine does the work of many. Before you had to dig out the road and haul it to a crusher to to recycle the material and haul it back and dump it on the road bed and spread it out. Now you just make one pass and you got it. The wheel had hammers with renewable tips like a stump grinder.
Hi, Sergei. I'm new to the channel, but like it a lot. You're the first North American trucker whom I subscribed to. A couple of questions: - do you have a frigde in the sleeper? - and what is your opinion of DAF & Mercedes-Benz trucks? Thanks!
szlaeyer22 1. no i don't have a fridge. i prefer using air conditioning. 2. i have no experience with European trucks but I drove a Freightliner with a Mercedes Benz engine and that was the worst engine ever.
biiiysue i wanted to but then I read another research on the diet of people who live past 100. guess what? many of them drink 1 to 3 glasses of red wine a day ;)
hey sergei , nice work man keep it up , really like your videos... i am a trucker too, in calgary,alberta. i hope you stop by calgary some day , would like to meet you ... let us know your future trip...keep goin ..tc
***** too much is when you drink so much that you have to stop every 30 minutes for the toilet ,, or too much is when you start talking about painting yellow machines black. hope this clarifies things, hope your trip is going okay ? drive safe
I"m back in Canada. See the new vid 'Delivery of Bomag RS950 in Mississauga ON'. Picked up the new action cam + head mount at the post office. Will do unboxing video with some testing Saturday May 30th. Have a good weekend, everybody!
Someone was asking about the tracks. Track 1 is called DRIVEN TO MADNESS. Track 2 is THOR'S HAMMER. Both are from RUclips audio library. Thx 4 watchin'-
All trucking videos should be accompanied by heavy metal music
In all my years of trucking I have never loaded at CMI and I live just east of Okie City in Choctaw, Ok. So it was really cool to see somebody getting a load out of there. I don't know who gets the bulk of their freight but pretty sure it ain't Landstar. I'm stuck up here in Fargo, ND looking for something that doesn't suck. Happy trails back to the Canook.
Robert ManleyYeah, it wasn't a Landstar load. I think my boss got it direct from Bomag.
I lucked out and got a load to Stockton, California plus a partial so really got lucky. I will wink at the California babes for ya, if I see any. Happy trails.
CMI, you got it right!!!!
No pressure reading on the tires because they are filled with water, that's why you see that big pipe cap instead of a air valve. You turn the tire until that cap is to the top and fill with water.... Also, '20 ply' is just that, the tires are built with 20 plies (layers) of material. Safe travels.
MrSteve65 Why the water instead of air...just curious.
las347 From what I understand. Water is the better choice for 'raw' land working vehicles (most if not all farm tractor tires are filled with water)... Extra weight (the extra weight is at the lowest part of the machine, less likely to tip), when they roll over big objects the tires can compress and widen at ground contact (the water fills the top section of the tire/wheel and stops the tire from going flat to the rim). I'm sure there is more reasons. I would bet they were filled with water when Uncle Sergei picked up the machine, so that could have been extra weight of water of round/about 1 ton he was moving just in water.
The pipe plug is to cover the valve stem from damage. They fill water through stems
Watched in HD. Very cool intro, vibrant picture, and skilled editing. I am becoming addicted to Heavy Haul TV.
I like the D rings back at the boom trough opening. That arrangement allows better options for tying down. Much better than the early 2000's Load King I used to haul with.
It is like a huge roto tiler. No water on the tips, those are hardened steel so they can grind up asphalt or regular dirt where they are laying asphalt for a parking lot or highway. They put lime down and then you can use it to mix the lime in the dirt.
That is an expensive machine they use them for grinding asphalt it mixes up the asphalt with the road base they pack it with rollers and put new asphalt on top.
Its a pulverizer. It is used for building roads or recycling and redoing roads buy grinding the old asphalt into the base material under it Then they compact it grade it and resurface.
Yup Pulverizer, I operated them for 10 years for a Ontario company that owend a fleet of these 8 or 9. CMI was bought up by many companys, fuck Bomag .This guys on glue if he thinks a C27(newer) or a 3412cat motor is quiet
Hey Sergi, I've watched almost all of your videos, even set through the commercials so you'll get rich and I must say, I'm hooked. I like the description of Canadian use of that machine, makes sense to me. I was surprised that it has 950 HP, but then it is a huge machine. That looks like a huge rotor tiller, maybe you have huge gardens in Canada. If you get a chance, I'd like to see a shot under the skirt of that monster, you know do an upskirt shot!!!!!.
20 ply tires. Car tires are usually 4 ply.
pitty missed buying the fender covers at Joplin truck stop that would have covered your 3rd axle , cheaper I would think in the USA compaired to here in canada. Thanks for the vid, and had me laughing at revenge use
xmodriver i didn't see any single axle fenders over there. might order again from my local minimizer dealer.
Must just be all yellow for shipping Sergei or does it change to black by itself?
DodgeBob02 there's a bright red switch on the dash. you flip it and the machine goes into 'stealth mode'. this option costs $25,000.
Excellent video of this monster machine on your very smart truck. I can't imagine this being quiet when its tearing up asphalt somehow!
Safe journey.
Nice load, music sounds like a heavy metal band from the 80's.
Have you not seen the Bomag RS951 Mark 2 it will tear up those drives in 2 seconds flat, and they have stealth mode built in, so the kid can be real Ninja when he's out at night!!
Такую технику в первые вижу просто класс !
shura moloko классная вещь для строительства дорог ...
Thanks for the humor and the knowledge. What camera type are you using Serge? Stay safe thanks
mahbub mohamed The dash cam was Papago 520 and the handheld was Panasonic HC-V750. ruclips.net/video/fGdlDCqCEVk/видео.html
I think those tires are foam filled
Impressive looking, truck,trailer and load. the best to you.
Thanks for the track names Sergei!!
That's some bad-ass metal you are hauling this time.
I definitely see why you got into heavy haul...very interesting loads you get sometimes. Makes your job that much more interesting. By the way thank you for the different camera angles.
las347 yeah, it's a bit different from pulling a dry van. 'Driver? Back to Dock 3'; Driver? You're all set'. most of the time you're very removed from the load in the back. when you work with steps, flats or floats, you get a hands-on experience with the load. while pulling this thing from OK, i saw people staring at the machine. a couple of guys came over and snapped pictures ("I wanna show it to my buddy..."). I felt like a hero ;)
Cool Machine , now no chopping up any D.O.T cars you see on your home ,lol
Love that rockin melody. I think I saw that machine in an recent Russian special Ops revenge hit. You catch some of the flooding? Drive safely.
hi uncle Sergei nice video ,your black Mack with that yellow Bomag on the back looked amazing. I hear there's been heavy rain and flooding in Oklahoma and Texas. It looked quite bad on TV, stay safe.
i really like that dual camera angles ... it gives more dynamic look to the scene....
... drive safe
Awesome vid, and of corse I like the music on , good job, if u don't mind Sergei, can u talk and show more about tie down job, how many chain on the load and why etc. I wanna learn about it more, actually I'm working on flatdeck but just a regular deck with regular job. Thank You, n' drive safe
Like the music, fits the machine.
Hi Sergei, why don't you buy cameras and put them on to the trailer. So we can see some on the outside. I think it can be really beautiful.
Well that is a great machine , you are a card the stories you can tell are very far fetched . nice music Sergei . good luck have a safe trip and we will see you on Canadian soil next time . .
What's the name of the song that's playing as you are loading the machine.
Nick penn is that a question
What a B.S. story. You must be an Uncle Remus story teller for truckers.
That machine is for road rebuilding. It is like a combine for a grain farmer. One machine does the work of many. Before you had to dig out the road and haul it to a crusher to to recycle the material and haul it back and dump it on the road bed and spread it out. Now you just make one pass and you got it. The wheel had hammers with renewable tips like a stump grinder.
A sense of humor is a beautiful thing. Not everybody has it.
Music level is a bit loud given your normal voice levels... those are cutter bits on a rotating drum...
Hi, Sergei. I'm new to the channel, but like it a lot. You're the first North American trucker whom I subscribed to. A couple of questions:
- do you have a frigde in the sleeper?
- and what is your opinion of DAF & Mercedes-Benz trucks?
Thanks!
szlaeyer22 1. no i don't have a fridge. i prefer using air conditioning. 2. i have no experience with European trucks but I drove a Freightliner with a Mercedes Benz engine and that was the worst engine ever.
Needed to fix the pot holes we have up here in Canada!
Nice. Great tunes, Uncle Sergei.
Hauling a Terrain Leveler or a Road milling machine. But that is very awesome you hauling this beast.
A giant roto tiller for ground and pavement, rite?
Finally a convertible!
i love his jokes 😂
que daora adoro esse trabalho show
The music rocks!
Sergei, When you read the Warning Notice on the tire, it reminded me of a Farm Girl I used to date ;)
Uncle Sergie must have spent too much time in Colorado..
Mike Mchale that's not entirely true.
Wow never seen one of those things before
Awesome music Sergei. I love the intro on this video. Who is it. Fits the machine like someone else mentioned
Hey bud don't you run a CB in your truck i was trying to talk to ya couple days ago i saw you with this load in missouri.
Jessica Holtman i mostly keep it turned off. programming sucks.
hi serei, did you give up drinking. can you tell me your thoughts on that qeustion
biiiysue i wanted to but then I read another research on the diet of people who live past 100. guess what? many of them drink 1 to 3 glasses of red wine a day ;)
Good video, poor choice of noise.
I knew that is what they used those things for.
that trailer looks nice Sergei
Its a big roto tiller
Aiiiiiiiieeee!! Deee bullsheeeeet...she be getting really deep in here...LMAO. Sergei has a vivid imagination
Again Sergei you had me laughing at the very entertaining description for the use of the machine, love you vlogs. Be Safe buddy.
hahahahha! Sergei, you are such a funny man!
hey sergei , nice work man keep it up , really like your videos... i am a trucker too, in calgary,alberta. i hope you stop by calgary some day , would like to meet you ... let us know your future trip...keep goin ..tc
Great Videos.
hey Sergei!!! great video
you sergei
Sergei, You are so full of it. Don't quit your day job okay...
hi Sergei,,, are you drinking too much coffee ? have a safe trip,,,,,,, kind regards
Phil Snaith define 'too much'.
***** too much is when you drink so much that you have to stop every 30 minutes for the toilet ,, or too much is when you start talking about painting yellow machines black. hope this clarifies things, hope your trip is going okay ? drive safe
thanks for the reply,, all the best