Game changing xTool P2 55 Watt CO2 Laser gets a test drive by Old School Master Carpenter
HTML-код
- Опубликовано: 11 июл 2024
- Check out $500 off coupon code below!
An Old School Master Carpenter test drives the game-changing xTool P2 55 Watt CO2 Laser Machine after unboxing it, building a custom mobile cart and doing initial setup. If a "digital troglodyte" like Master Carpenter Matt Jackson can do it, you can too!
A PDF Plan Set for the P2 Laser Cart featured in this video will be available soon! If interested, please send an email to matt@nextlevelcarpentry.shop to be notified when plans are complete.
Ready to enter the brave new world of Laser Engraving and Fabrication? GREAT!!
Use a link from the list below plus this discount code for a great deal on any xTool product orders made through the Next Level Carpentry Channel: PRIMEP2 : $500 off over $4,999 for xTool P2
Check out the xTool P2 - The Smartest CO2 Laser Cutter at the link where you live:
US Store: www.xtool.com/products/xtool-...
UK Store: uk.xtool.com/products/xtool-p...
EU Store: www.xtool.eu/products/xtool-p...
DE Store: de.xtool.com/products/xtool-p...
FR Store: fr.xtool.com/products/xtool-p...
Sales through these links pay small commissions that help support video production on the Next Level Carpentry Channel which are always appreciated... thank you in advance!
Use this link for a discount to cut steel 'like butter' with an amazing Evolution EVO360CPS metal cutting chopsaw like the one I use in the video for making the Custom Laser Cart:
aspireiq.go2cloud.org/aff_c?o...
Chapter List:
0:00 Roll & lift laser shipping carton
0:46 xTool collaboration explained
1:45 Initial unboxing of the P2 Desktop Laser
2:45 Custom laser cart build overview
6:55 Remove internal packing material
10:00 Laser cart build modification
12:58 Final unpacking
13:31 Example project introduction
15:38 Essential P2 laser connection issues
18:40 Operating software required
19:15 Onboard controls for this laser
19:30 Power cord connection protocol
20:35 Machine setup overview
20:56 Basic laser engraving example
25:45 Engraving signature explained
30:24 Engraving direction options explained
32:25 Engraving signature example
33:30 Laser beam in action
34:00 Finish engraving signature
35:39 Engraving pencils explained
43:13 Engrave text on Pushsticks
45:10 Cut out Pushsticks
48:30 Engrave 2nd face of Pushsticks
49:42 Conclusions Хобби
Great video, Love the tool box, would like to see how you made the tool box.
Be careful what you wish for... a full 3-1/2 HOUR long video of the complete Master Carpenter's Tool Tote build from Next Level Carpentry will drop in a week or so... hope you'll check it out and tell your social media friends about it when it does!
Always would've smashed like, BUT the thing that made me do it before the video was over:
"Now you know all this USB-S..."
Thanks for the early smash of the like button! That whole US-BS debacle put me in the mood that I was a lot more likely to smash the laser than any like button until I got past it!
I absolutely enjoyed your explanations and time spent spotlighting the numerous positives and negative (USB-c) issue of this machine. More importantly though, is your unabashed enthusiasm to learn something new. You, sir, are a gold standard example of "the way we were". Thank you!
Once again, Matt, you slayed me with your power supply set-up. Those caviate segments are my favorite!
Frustration over the USB-S sets me apart as an "old school guy" because I get the feeling 'digital natives' just know stuff like that like looking both ways before crossing a street but it brings me to an infuriating full stop. I was so tempted to bail on the whole project but and already thankful to have found the solution and even a proximate cause for the problem. The whole thing seems as ludicrous to me as the power cord sequence you saw.
OMG, your video was amazing! And yes, I watched to the very end. I'm in the market for my first laser and you answered all the questions the other videos did not! Thank you! P.S. you have the most organized/cleaniest wood working shop I've ever seen! I want to be like you when I grow up...LMBO!
I probably need to actually grow up first though, right? 😂
Best unboxing video ever!
Magic video Matt.
Very cool machine. Thanks for the video
Great video👍, I have been using an Xtool diode laser for over a year , and I learn quite a few things while watching your video, on the software and also some working techniques . Thanks for teaching an old dog like myself , new tricks.
Thanks Roger... Where this laser thing is concerned I feel like the proverbial King in: "in the land of the blind, the one-eyed man is king". I'd bet you've come across Samcraft's RUclips Channel... that dude is light years ahead of me with these machines. I think your time would be well spent learning in-depth stuff from him too... us old dog's gotta look out for each other, right?
Very cool machine. Thanks for the video. 👍👍
Thanks Jerry... FWIW while making a new little organizer for the shop (you'll see it in the next Patron Only video) I engraved and cut some 1/4" thick smoky bronze acrylic. Talk about cool machine! The laser beam slices through that acrylic like nobody's business... VERY impressive!
That’s a sweet cart you built. Looking forward to future laser projects.
Thanks for saying that about the cart... no surprise it's actually quite functional as is but I will be adding something to keep dust from getting into the drawers under the machine at some point because that shortcoming already became obvious with the laser parked in the shop.
Great timing, I just got a diode laser - looking forward to more awesome laser videos
Clever presentation of your latest present!
Thanks for watching and commenting on this unusual video Don... much appreciated!
another great video thanks
Awesome video, very informative, thanks.
Welcome to the Laserologist Club, Matt!! I just said to my wife that some 1-1.5 years ago I was thinking that your work could benefit from having a machine like that. And not it became a reality or you. This could be great or creating patterns, especially when re-scaling or adjustments are necessary, engraving, etc. Since this software seems to be working or you, perhaps there is no need for Lightburn for you, though that one is also very intuitive and is an absolute marvel. Congrats!
I do feel like I've paid some membership dues to the Laserologist Club, that's for sure! FYI xTool just released a new version of Creative Space that, it appears to me, is closing the capability gap between CS and Lightburn. I think Lightburn is working on their program so that it can do contour engraving which, to my knowledge, is exclusive to xTool at this point? I'm curious how much I'll do with the P2 for my 'day job' over time. I find myself on an interesting fence right now because it seems like using a $4K+ laser to make a pattern is both unfair to my audience and feels like cheating to my old school brain... should be interesting regardless.
Awesome !
thank you for interesting video and positive humor along the way
Gotta laugh a little or I'll cry out of frustration dealing with things like the USB-S ordeal! Once I got past that, though, it's been a lot of fun working with the P2!
While the laser is really cool, to me the amazing part of the video is the stand you built. Not only is it a custom fit for the laser, you also turned it into a drawer base. Awesome work as always!
Thanks CR! The cart was necessary for the laser to live in the Next Level Carpentry shop and really makes the whole laser thing work out.
Best,
Matt
Official end of the end of the end... Good one!
Thanks for watching to the end X3! As it turns out making that Banner text and logo was probably the most fun I've had with the laser yet...
WOW Nice one, Matt. Next Level, indeed.
Thanks for sayin!
I didn't talk about it in the video but I get three to five offers per month from companies offering their laser to test drive but the next level nature of the P2 is what encouraged me to take the bait.
An amazing and highly capable machine that I am actually honored to have the privilege of reviewing. I'll probably never realize or capitalize on its full range of capabilities but it is a pretty sweet addition to the shop!
I've worked with multiple class 4 lasers over the years. You should be aware that it is risky to take covers off the machine while it is operating. If the lasing tube or any point along the path to the cutting head develops a light leak you are risking your eyes. CO2 lasers operate in the infra-red light range. You can't see it and it will reflect off of things you wouldn't think were reflective.
Duly noted...thank you! Please feel free to share this video with anyone who is curious about what that beam looks like in operation so they can satisfy their curiosity without taking the real but infinitesimally small risk I did in filming it 🤓
The door locks when it is in use.
@@bestyoutubernonegraternumber1.
You are correct about the lid to the working compartment.
The previous comment is regarding the back cover that is screwed on and intended to be in place while the laser is in use
I'm an electrical engineer. A mate of mine used to have a printed circuit board factory, and I would frequently help him sort out his equipment problems.
At one stage, he acquired a huge laser plotter (for producing the photomasks used in PCB production).
The thing was playing up and he asked me to "look into it" (pun).
Anyway, I took one look at this thing with its big laser tube and lots of mirrors directing these invisible "frickin laser beams" around a multitude of paths and said "nope, you need somebody that actually understands what they are doing inside this thing".
You only have to accidentally interrupt one of these beams and reflections will go everywhere...
(It felt like I was getting into "can you please fix my radiotherapy machine" territory)
With you being a laser newbie let me give you one piece of advice I never see any of the so called "experts" tell their viewers; do not leave the laser running unsupervised. Fires have and fires will occur. This is especially true when engraving/cutting paper and fabric products. Additionally products that have a protective coating such as acrylic with a paper mask can catch fire if that mask is not firmly adhered to the material. Lastly is the use of tapes to hold down the materials. Any tape pigtails hanging in the air if lasered can catch fire and set the rest of the material on fire as well. One thing I did not this laser has very poor smoke removal. With the chamber filling up smoke the smoke will get on the mirrors and etch into them. I would suggest adding a stronger external vacuum to remove the smoke at a much more rapid rate. Be wary of what you try to cut or engrave. For example cutting or lasering PVC will produce hydrochloric acid. The result is some pretty toxic fumes. If the product has PVC in it, stay away from it. Just my 2 cents. Have fun with it!
Well Hell, I am looking at that exact laser or their S1, clueless as well on software etc to make it run. Was looking at a bunch of videos to bring me up to speed and boom unexpectedly you showed up in the feed, and wouldn't you know it, you convinced me I had yet another work table to build. :)
F.Y.I. I am subscribed and look for your stuff, not sure why RUclips didn't shove this one to me in the first place.
You might have seen this already but there's a few segments in this recent video showing the P2 laser in action in case it influences your laser shopping decisions: ruclips.net/video/2Nbe8ateORY/видео.html Use the Chapter List in the video description to seek out laser-specific parts of the video...
"USBS" ... love it! 😂
To right of fire extinguisher I see PVC fence post drawers inside plywood boxes that slide out? I don’t remember that being part of the video that that. Really nice if you got a weird space to add storage.
Great crash course. Loved seeing the stand.
Good eye! Those drawers are a variation on the PVC drawer theme. Seen from the side you'll notice that they're actually about 4' long. I use them for storing all manner of round and square steel, long wood dowels, threaded rod, flat stock, etc. They work amazing but IMHO more for storage of weird stuff than filling a weird space with storage...
Best,
Matt
I would suggest leave the top part of your stand clear so you laser larger objects from underneath. The bottom of the laser is designed to be open for access.
To get rid of your wood scorch, use painters tape to mask the top of the wood and then remove the tape. No sanding required.
Sam with Samcraft has some good tutorials on using the x-tool. Looks like you are well on your way to mastering the machine.
Thanks for the suggestion to Samcraft... I came across a few of his videos as I was ascending the learning curve and can tell you he is a paragon in the world of laser engraving IMHO. After using the laser for a couple weeks I feel like I have a functional but clumsy skill set and feel a lot more confident that I can tackle tougher projects even if I don't know exactly how to do them yet. Other than the US-BS cable thing the rest of the machine and software interface is pretty intuitive which actually makes the learning curve and enjoyable ride.
Mounting engravings on objects: One way would be to cut a recess into the object with a router. The template for the router could be cut on the Laser so it has already the dimensions saved. Then cut the panel with the engravings to that dimensions. Then it can be glued into the recess. Or make the recess a little less deeper than the panel, give the panel an angled edge and let it stand proud of the object a millimeter or so.
You could also cut through the panel in order to get a cutout instead of burnt wood. Then fill the cavity with some fancy colored epoxy. (Or let the body color of the object appear. (Paint/stain after cutting the recess) That way you can create other colors than burnt wood. And get a smooth surface.
To avoid any islands falling out of the panel put a two-ply sandwich into the laser. Both sheets held together by a double sided adhesive tape. Then just cut the upper layer (and a little deeper to get clean edges in the cutting. You need to do some experimenting here.) And avoid the fumes the burnt tapes creates. After engraving put an adhesive foil on top of the engraved part (or tape at those critical spots) to hold everything together. Then remove the bottom layer of the sandwich. Now you can put the engraving into the recess or straight onto the object.
I have to stop before I start contemplating to buy my own laser.
11:05 As always there are more ways to skin the cat. I can think of using a dowel the same diameter as the feets. Actually looks like the hardened silicone/acrylic of caulking tubes that have overstayed their "consume by" date. I usually cut them open and take the hardened silicone out. Just in case I need a foot, or a buffer or a dowel to e.g. raise the CO²-engraving machine. Then insert the dowel, slip the PVC pipe on it and voilá, the increased height without cutting into the metal.
33:30 Crazy.
That is a very dangerous and completely invisible ray of light bouncing around in there. If you're a viewer reading this later on, please don't open any panels at all while the laser is on. It is 100% capable of damaging your, or worse, someone else's eyesight instantaneously. It can reflect off of almost anything and still harm you.
Except the beam generated by this CO2 laser is not "bouncing around in there". It follows a very exact path where it reflects off precisely aligned mirrors to a very specific target within the locked laser cabinet.
Your alarmist comment is like telling people to stay off of sidewalks because the danger of cars driving by has the potential to kill them because the cars are 'flying by out there'...Except it's not "bouncing around in there". It follows a very exact path where it reflects off precisely aligned mirrors to a very specific target withing the locked laser cabinet. Your alarmist comment is like telling people to stay off of sidewalks because the danger of cars driving by has the potential to kill them because the cars are 'flying by out there'...
Yes sadly some USB-C cables are made for only data transfer and some only for charging. Which makes this even more confusing. Great video though and excited to see what you can make/use with the laser.
More confusing still is the USB C cable I used allowed my Samsung phone and the Surface tablet to communicate perfectly meaning it's capable of data transfer AND charging... but not for all devices that have USB C ports. WAYYYY above MY pay grade for sure!
Very helpful video, especially important to make sure you use the correct hand when plugging in. Quick question: do they say how narrow a kerf you can cut on a through cut, let's say in 3/4 hardwood. I wonder whether it could be used to cut out a drawer front in a continuous piece of front for a desk, for example.
The kerf is very thin, at least on stuff I've cut so far. Keep in mind that the laser is burning it's way through the wood so, even though the kerf is narrow, you'd lose everything you'd gain by the time you trim 'charcoal' off the laser-cut ends. Better to use an ultra thin kerf circular crosscut blade to keep kerf to a minimum and preserve the 'one piece' look for the desk IMHO.
Have you seen the new Evolution miter saw? That thing is a game changer!
The one I have is a game changer... the new Evolution S355MCS: Mitering Chop Saw Is a game changer for the game they already changed IMHO! But you already knew that! 😎
store.evolutionpowertools.com/products/evolution-s355mcs-mitre-chop-saw-heavy-duty-metal-cutting?variant=40543117344861¤cy=USD&tw_source=google&tw_adid=&tw_campaign=18970009141&gclid=EAIaIQobChMI4pmlhceggQMVUdDjBx1S1wR6EAQYASABEgKEOPD_BwE
FWIW There's a good chance you'll see the new saw design in action here on Next Level Carpentry at some point because I've talked with them about collaborating with it on the next appropriate video here on the Channel...
Thank you so much. I love the way you teach class. Can you tell me the name and brand of the red push riser that you used to transport and lift the laser onto your table? I live alone and my laser has been sitting on my wooden table for about a week. I need to put the riser underneath and I want to do it exactly as you did it. It was very heavy for me to lift if off the ground but I did it using a shelving rack and got it onto my table all by myself. Its a lock and get fit onto th riser, and I want to be careful with placing it onto the riser. Thank you
Hey: the red push cart is just a generic brand with a lift capacity of 770 lbs. Variations of it are readily found at Harbor Fright and/or Amazon. It's a useful piece of equipment but, having just put a riser base under my laser two days ago, I can tell you it wouldn't be worth getting the lift cart for the job because it would be pretty tough to slide the heavy laser onto the relatively light and somewhat flimsy base. If you can't get a friend or furniture mover to do the lift/placement, if it's a possibility at all, I highly recommend installing a Sky Hook in your work space like the one I used to lift mine: ruclips.net/video/zU6PAt3o8yI/видео.htmlsi=z5WVJ8McMXDDg6X5
FWIW you can see the lift in action in an upcoming video from NLC to see how useful a Workshop Sky Hook really is.
Hello! GREAT VIDEO! What camera and editing software do you use? Your video work is top notch. This is the first video of yours I have seen. Great work and thank you
Thanks... getting video production to the level where viewers like you offer compliments has been a VERY long journey so I really appreciate it!
Using a Sony a7000 mirrorless camera with their compatible wireless lapel mic and editing everything with Camtasia. I don't think it's the best setup but it's kind of what I started out with and got used to and don't want to start over on an new learning curve with 'better' equipment and software.
Thanks for the reply! Cant seem to find the A7000 online but I'll keep looking. Cheers
@@NextLevelCarpentry
@@Whatsintheshop My apologies... I gave you the WRONG camera number?!
I recently bought a new camera and considered what an a7000 but ended up getting the a6100😲:
www.amazon.com/dp/B07X71JK4L?linkCode=ssc&tag=onamzdigitalj-20&creativeASIN=B07X71JK4L&asc_item-id=amzn1.ideas.2J79U4YLDLYM8&ref_=aip_sf_list_spv_s_ons_mixed_d_asin
I got this model as an upgrade to my old s6000 because this one shoots in 4K resolution, It's super lightweight and compact for what it does and I'm used to its features and controls.
Here's the wireless mic setup I use with my camera:
www.amazon.com/dp/B00HPM086C?linkCode=ssc&tag=onamzdigitalj-20&creativeASIN=B00HPM086C&asc_item-id=amzn1.ideas.29WVINIJF4EUJ&ref_=aip_sf_list_spv_ons_d_asin
I really appreciate your honest and thorough review of products like this laser. As for me, I like to get my hands dirty in the shop, and I find it gratifying to learn and use the manual skills that let me do things for myself. So for me...cabling issues aside...a device like this will never be more than a very expensive boat anchor. Love your videos! Thank you!
Thanks for watching and commenting on this one.
When I got my first smartphone I had no idea of how I would integrate the potential technology into life and work and suspect taking on the technology of this laser may have a similar effect over time and become a more integral part of my workflow but then again the idea of abandoning true Hands-On work I love for something that involves little more than clicking buttons isn't all that attractive to me so time will tell.
Are you ever going to do the master level saw horses? And how about finishing the series on GROATs?
Don't remind me! 😟 I got distracted with a Master Carpenter's Tool Tote build that I think you'll like but it's been delayed for months by issues with this and another laser that stopped me in my tracks. I have every intention of doing the videos you asked about and, truth be told, wish I could just drop other video projects and do them first...
Now all you need Matt, is a Holster for your Ray Gun! 😂
Then I could walk around with the laser tube saying "go ahead, punk... make my day" to unsuspecting passers by! 🤣🤣
Great video. I’d like more on how to do the signature. I am not following to make it a usable file. Thanks
Sounds like a good topic... I may produce a video showing how I went about it for the signature on the toolbox in this video... no promises though.
Another note: just got to the part where you cut push sticks... I hand-made one of your designs perhaps 2 years back, but with an accidental twist that changed the shape of the handle a bit. I think this was very fortunate and would be happy to share the pattern with you so that you can try it out using the xTool laser cutter if you want. If so, where can I send to to? Thanks!
I put an email in the video description that you could use to send a pattern or picture if you want...
Could you send a link where I can buy the dolly that lift up? I move things around a lot this dolly would save my back.
Here's a link to a similar cart: www.amazon.com/dp/B08LMPT45Y?linkCode=ssc&tag=onamzdigitalj-20&creativeASIN=B08LMPT45Y&asc_item-id=amzn1.ideas.2J79U4YLDLYM8&ref_=aip_sf_list_spv_ons_mixed_d_asin
but not to the exact one I have and use. I got mine from a friend who probably bought it 30 years ago and a lot has changed since then so shop around and, if you got the $$ and a place to store it, the cart is quite useful even if only used rarely.
I should really buy a lift table. I just lifted the box by the plastic straps and placed it on my workbench. In hindsight, it would have been easier to lift the P2 out of the shipping container before lifting it onto the workbench.
I'd have used the need to cut standoffs as an excuse to justify the purchase of a Precision Matthews PM-1340GT Ultra Precision Lathe. She'd be supportive once I made her aware that I could also use the lathe to make custom jewelry for her. My hobbies may be getting a bit out of hand...
I just hope that after my death my wife doesn't sell off my tools and equipment for what she thinks they are worth.
a normal usb c cable not working means that the xTool is using some non-stand pin connections. that never should have happened, it'd be like if an extension cord had the ground on a different pin..but only on one end.
Your extension cord analogy seems spot on to me!
I am flabbergasted that a $10 adapter can solve the problem on a $4K laser but isn't included or even mentioned anywhere in product literature that I saw.
When are we going to see the finishing off the groats?
The remaining 3 episodes definitely slipped off my video production radar but, FWIW, I was thinking of the 3rd episode while I was building the mobile cart for the P2 laser so maybe I'll be able to get to the next episode sooner than later? Thx for your continued patience! Truth be told, response to the GROATs and the build series has been disappointing which kind of depletes my motivation to do the videos when other topics generate more interest.
6:50 To avoid too much dust, from spray painting without extractor or other wood projects, to accumulate in the drawers how about a cover at the top of the stand? Or would that impede the airflow to the engraver?
A dust cover for the drawers of some sort is definitely in the works! It didn't look like it would be necessary until I had to raise the laser so the tray could slide out. Then it was quite obvious. Not worried about airflow because the machine is designed to sit on a solid 'desktop' which would also limit airflow. One more little prototype design detail that only becomes obvious after the fact, right?
@@NextLevelCarpentry That's what rabbit prototyping is for.
Who makes the hydraulic lifting cart you used at the start of the video? Thanks!
It's just a Harbor Fright sort of unit that a guy gave to me. Its capacity is like 770lbs or so. I've only used it a few times so it's barely worth the space it takes up but, if you've got room and $$, it's pretty sweet to have around IMHO.
@@NextLevelCarpentry Thanks!
I can't find a USBS cable on Amazon. Can you send me a link?
Sure... just let me know if you're looking for USB-S to USB-A or USB-C and I'll get right back to you! 🤣🤣
Hello Matt, I tried using your link with discount code to purchase a P2 and it does not seem to work. Is the discount still active?
I assume you tried the US link in the video description? Here's what I see where it shows a $500 discount:
www.xtool.com/products/xtool-p2-55w-co2-laser-cutters?ref=ldd4c15VZo62j&
Let me if it works or not and I'll reach out to xTool if it doesn't. The link should credit any sales to this Channel which I would really appreciate.
Best,
Matt
@@NextLevelCarpentry Thank you for the quick reply. Yes I did use the link. The P2 is discounted on their website already by 500(is this the discount you are referring to?).When I enter the promo code it tells me it is invalid. By the way I liked the video especially the jig with the extension cord :)
@@davidcoppola7620 Oh, OK, I guess the promo code is now the 'new normal' for anyone visiting the website. I've not been made aware of any special special codes. If you're not in a rush I could check with my contact at xTool to see if there's any current code beyond that. It would probably take a few days to get a response with time zone delays dealing with them...
@@NextLevelCarpentry That would be very kind of you. I am not in a huge rush to get the machine so I could wait. Thank you for your time and keep up to good content!
@@davidcoppola7620 NO problem... I've sent an email to my contact asking if they currently have any other/special offers to offer you and will let you know if/when I hear back. Hope they can sweeten the deal a little for a dedicated viewer like yourself. 😎
That was a great video Matt, I have been laser engraving for 4 years now using LightBurn after you learn the basics it becomes intuitive for many. Seeing this laser in action was nice to watch and in such a short time you learned make the laser walking soon you will have it dancing. I have a baby 10 watt Longer Ray with a focal beam of .06 mm I do a lot inlay work that looks better than traditional inlay buy hand or a router. You should give that a try! Hopefully I have etched an idea for you to try. 🤣🛫
Wow, I like the idea of inlay... thanks for that! FWIW I also got an Ortur LM3 to unbox and review but, in over 3 months, haven't been able to get it to do the simplest of tasks. They profess it's WiFi capable but not even their tech support has been able to tell me why it won't let me enter, format and engrave text! At some point I'll invest a bit more time in it as it may well be more suited to the inlay work like your 10 watt machine.
I am very interested in marketry. Using wood veneer for inlayed pictures. I would like to learn more of your thoughts and meathods.
Seriously!
Jimknowles
LOOKS NICE BUT STILL THE PRICE IS STILL TOO HIGH FOR ME 🙂
Given your a Carpentry channel, What where the main reasons for making the stand out of steel? Wood is well strong enough for 100 lbs. Even spindly chairs hold up people.
I choose welded steel for practicality more than strength. Joinery for a cart of this configuration would require larger dimensioned material that would make the cart cludgy IMHO. If the goal was to build a cart made of wood, I'd do it but, since the goal is to have a functional cart of minimalist design without investing undue time and effort, I chose welded steel, even though "it's a carpentry channel". Same reasoning applies to the stand under the DW735 thickness planer, miter saw, tablesaw, jointer, etc.
The UBS business would be avoided if you had a Laptop with a USB-A on it and were lazy and cheap like me and used the cable that came with it. Though I do have several c to c cables around so if I laptop had a C port on it. I'd have likely used that.
BUHTTT... The USBS Gremlins don't give up so easily! A laptop so old it has just a USB-A port is probably so old it wouldn't be compatible with Windows 10 or 11 and wouldn't run the Creative Space software, right?
@@NextLevelCarpentry Na.... I have one running windows 10. Its actually fairly fast. I moved my wifes laptop to 11. Works fine. I do like the Surface pro. She may end up with one. I miss the DVD player on my laptop though. Converting all my old music and DVDs to a server now so I can run a media server so I stream them all.
@@Danman1972 Sounds like you must be better equipped to handle tech issues than I am. Good news is that after working through all the cable 'issues', the setup is working flawlessly now. It would have been much simpler though if I had a machine like yours that came with a USB-A port... but then I wouldn't have had or shared the learning experience of all the cable issues... 😎
@@NextLevelCarpentry I work in Telecommunications. I do know a bit.
@@Danman1972 ...no fair! You have a superpower!! 🤯
You shouldn’t look at the laser tube in action. And if you do, you at least need special wavelength glasses to protect you from going blind.
You don't know what you're talking about. Please educate yourself before making false generalized proclamations about specific actions.
@@NextLevelCarpentry fine go blind
@karadanvers6136 do you ever leave your lead-lined soundproof earthquake-proof bomb proof shelter box and experience life in the real world or are you so paranoid all you can do is spend your time quivering in fear and posting idiotic comments on RUclips videos?
Wait. I thought Laser GRBL wasn't supported on the P2?
I would assume it is supported but don't know for sure. Good news is that the latest version of Creative Space by xTool is quite capable IMHO.
@NextLevelCarpentry thanks for your quick response! I'm riding a scissor lift around one of my 4 stores (I'm the IT/IS Administrator for Klingspor's Woodworking Shop) installing new cameras and network wiring. Your video is keeping my sanity while working after midnight.
Very informative video. This is the first time I've happened upon your RUclips channel. Keep up the great content.
@NextLevelCarpentry oh, I almost forgot to mention. I have owned a Glowforge Pro for 3 years. I ordered the P2+F1 business Ultimate bundle (includes the rotary axis, riser base, auto feed system, portable F1 diode laser, and goodie pack) from xTool last week. I should be receiving it as of Wednesday next week. In comparison to the Glowforge Pro (which costs more by itself than the entire package from xTool cost me) this system is night and day better, and more affordable.
@@Connorsdaddy12062008 CNC Lasers and their programming software are definitely not my strong suit but if it helps you keep your sanity I think that's great! If you're still bored, check out the Master Carpenter's Tool Tote build on the Next Level Carpentry. It's 3 1/2 HOURS long so there's plenty of distraction, plus you can see the xTool P2 laser in action on a real world project from my shop.
Best,
Matt
who says cant teach an old dog new tricks
WOOF, WOOF!
New Tricks might take us old dogs a little longer to get the hang of but the reward is worth the treat IMHO!
I am surprised this isn’t WiFi.
That might be surprising but I'm very thankful it has cable connection capability.
I actually did a test drive of a diode laser that does have Wi-Fi but was unable to produce the video because I could never get it to perform with the Wi-Fi signal and that nice but useless brand new laser actually is a boat anchor at this point because of it.
It does have WiFi but you need the cable for initial setup.
Hi Matt, does the Xtool laser put out a lot of smoke, I was noticing that you were blinking more than normal like there was smoke in your shop, kind of a stupid question I know, I just have to be careful because of my eyes Thanks Matt
Yes the P2 puts out a significant amount of smoke in operation but the exhaust system in it is more than up to the task of clearing it.
The laser has a lot of amazing capabilities but, sadly, curing the intense allergic reaction I have to some strains of pollen is not on that list. I blink more for a few weeks this time of year than I do the rest of the year combined. You probably wouldn't believe all the sniffles and sneezes I had to edit out of the video while in post production but I couldn't eliminate the blinking and puffy eyes anywhere near as much as I wish I could.
Thanks for watching the video and posting a totally legit question so other viewers don't get the wrong idea from my behavior😎
@@NextLevelCarpentry Matt thank you for saying it's a legitimate question I have asked, another channel I was watching said he was sick of stupid question viewers would ask I stopped watching him again Matt Thank you
@@alanwasserman8176 I do get stupid questions but yours definitely wasn't one. Sad a Channel would insult a viewer for a meaningful question when there's so many lame ones out there that truly deserve pushback.
FWIW I didn't have the exhaust pipe hooked up for the first few burns I did so I quickly realized how much smoke it does produce because air soon looked like LA smog on a windless day. It's got to be fairly toxic smoke too and would sure irritate my eyes of pollen wasn't already doing the job!
Matt thank you,
Not you too
A piece of s-crap plywood 😂😂😂😂😅
Got whole piles of that s-crap laying around... and it sounds like you know what I'm talking about! 😎
5 minute video please max.
Sorry: you're neither smart enough or important enough to be making that sort of request. 🤨