A real test of the 3 tunes. Really proved nothing in this vid, not hating, was excited to see it, then let down, lol I have a PBD tune being put in my car Monday, replacing the mild Roush tune in now. See you have an Ngauge, do a vid on it and using one, getting one Monday also, as you know, to place tune in, no idea what it can do. Good filming and good audio on the vid however
Glad you're not switching the blower yet. Love the channel taking notes of all your parts. Everyone talks so bad about the Roush blowers and I'm happy you're pushing the platform to show what a true build could be
Title said time for more boost. I read through the comments and watched the video but didn't see how much boost that it's making now after the port job with the 2.8 pulley
@@StealthyGarage thanks Sir, just made 733rwhp with my Roush 2650 with 2.8 pulley running VP MS109. ruclips.net/video/xHg-lo79N2o/видео.htmlsi=7tjraUPVy_7aW3hP
@@StealthyGarage running that pulley on my 2650 Roush on a 21 GT it just made 733rwhp 632 torque on the dyno last Saturday running wengerd's VP MS109 tune ruclips.net/video/xHg-lo79N2o/видео.htmlsi=7tjraUPVy_7aW3hP
You getting heat soak with a killer chiller setup ? wow would have thought that would have took care of the heat soak. what were your IAT2 temps ? With that setup
@@StealthyGarage thanks for the fast reply. I'm really glad to hear that, I get my fi interchiller installed on the 18th you had me worried for a minute 👍
Ok I need your help I have a 2020 GT Mustang with a 2650 stage 2 supercharger kit Roush intake Roush exhaust I am having jokerz performance do the porting as well I want to do a the E 85 system I don’t know what I need as far as pumps injectors ETc. ??? Also I want to go with Palm Beach dyno tuning What hand held tuner should be used? And the last thing is the 8 rib pulley Would I have to change all the pulleys And the belt from a factory 6 Rib?
As far as I know there’s no 8 rib setup on the market. I wouldn’t go with palm beach dyno, check out wengerd performance. As far as fuel system get a fore system with id1050x injectors.
Roush PP2 supercharged griptec 3.0 custom tuning headers catless 1 7/8 all bolt on manuel Run intake cover removed NO whine sound ?? After porting whine sound ??
Have you tried a bigger throttle body on it? ... Edelbrock has a 103MM unit that may work? .. I was looking into that as well as a GT500 throttle body if that would be compatible? Have yet to confirm if the GT500 one can be used or not though.
What content would you like to see next?
A real test of the 3 tunes. Really proved nothing in this vid, not hating, was excited to see it, then let down, lol
I have a PBD tune being put in my car Monday, replacing the mild Roush tune in now.
See you have an Ngauge, do a vid on it and using one, getting one Monday also, as you know, to place tune in, no idea what it can do.
Good filming and good audio on the vid however
@@jethrocaine7232 I’ll be doing a more in depth video soon. Dyno etc.
Some Digs
@@davidwade7681 soon.
@@StealthyGarage rite on
Glad you're not switching the blower yet. Love the channel taking notes of all your parts. Everyone talks so bad about the Roush blowers and I'm happy you're pushing the platform to show what a true build could be
Glad you’re enjoying it. With proper cooling mods this blower does work.
Title said time for more boost. I read through the comments and watched the video but didn't see how much boost that it's making now after the port job with the 2.8 pulley
Around 15lb
@@StealthyGarage thanks Sir, just made 733rwhp with my Roush 2650 with 2.8 pulley running VP MS109. ruclips.net/video/xHg-lo79N2o/видео.htmlsi=7tjraUPVy_7aW3hP
@@StealthyGarage running that pulley on my 2650 Roush on a 21 GT it just made 733rwhp 632 torque on the dyno last Saturday running wengerd's VP MS109 tune ruclips.net/video/xHg-lo79N2o/видео.htmlsi=7tjraUPVy_7aW3hP
Are you getting much difference on night runs when it's cooler? Car still looking and sounds awesome.. Keep it safe guys...
Car always runs better when it’s cooler
And thank you. We try to keep it as safe as possible
Did you notice any supercharger wine difference after having it ported ?
Yes it whined a little more
What’s an estimate of how much money you put in your car? Give or take? Love the build! Great videos!
After it blew well over 50k
Did you do a smaller belt with the 2.8" pulley?
Does it make it whine more if you have the supercharger ported? I wonder if it could be a little louder🤔 other than that it sounds OK
Yes it does a little. Also you can take your kid off your intake to make it whine a little more
Is that a childs car seat 😂. Da fuck?
Some people have children?
Get a billet tensioner if you’re experiencing belt slip.
Already have
You getting heat soak with a killer chiller setup ? wow would have thought that would have took care of the heat soak. what were your IAT2 temps ? With that setup
I found out I was getting heat soak because my lines were freezing and not getting enough flow. Iat2 s we’re great after that
@@StealthyGarage thanks for the fast reply. I'm really glad to hear that, I get my fi interchiller installed on the 18th you had me worried for a minute 👍
@@markuaw1 you should be good
Ok I need your help I have a 2020 GT Mustang with a 2650 stage 2 supercharger kit Roush intake Roush exhaust
I am having jokerz performance do the porting as well
I want to do a the E 85 system I don’t know what I need as far as pumps injectors ETc. ???
Also I want to go with Palm Beach dyno tuning
What hand held tuner should be used?
And the last thing is the 8 rib pulley
Would I have to change all the pulleys
And the belt from a factory 6 Rib?
As far as I know there’s no 8 rib setup on the market. I wouldn’t go with palm beach dyno, check out wengerd performance. As far as fuel system get a fore system with id1050x injectors.
@@StealthyGarage I am happy with my PBD tunes, but I have a whipple not sure how they are with roush.
@@a.wheeler7731 they left a lot of power on the table
How did you like the blower porting?
It definitely woke the car up
It sounds like all that heat under the hood is looking for an exit.if you know what I'm saying..
😂
Roush PP2 supercharged griptec 3.0 custom tuning headers catless 1 7/8 all bolt on manuel
Run intake cover removed NO whine sound ??
After porting whine sound ??
It definitely whines
What gaz octane for run 2.8 pulley ?
Thank you ! My next upgrade porting joker and PWC brick upgraded
@@francissavard1402 definitely recommend e85
No e85 Québec Canada juste run 91 octane Mix Boostane 94+octane best for me ported and interccoler brick run oem size pulley 3.0
@@francissavard1402 what intercooler brick do you have?
Have you tried a bigger throttle body on it? ... Edelbrock has a 103MM unit that may work? .. I was looking into that as well as a GT500 throttle body if that would be compatible? Have yet to confirm if the GT500 one can be used or not though.
I have one that I need to put on.
@@StealthyGarage What one do you have?
@@timkline8374 edelbrock 103mm
@@StealthyGarage Awesome! I want to see how it goes!
@@timkline8374 finishing the build then we will
Have not seen content in a while...
It’s coming soon.
105° lol you’re wasting your time dude. Wait until the weather is between 45 and 60°
Car has since set the record
Ok. What pulley?@@StealthyGarage
I have a sleeved coyote with a VMP Gen 3 on it. Our set ups are similar.
@@harrisonclark4382 how do you like the vmp?
@@harrisonclark4382 2.5 pulley now. Car is fully built, ported heads upgraded cams etc
🐌 slow
Ok 👍🏻
Weak ass hater.