Idaho is beautiful. Luckily, I have family there, so I get to visit at least once a year. You should go there. Also, my family lives in the same county as these guys do.
Visit both Coeur d’Alene and Sandpoint. They’re both completely different, and both are great places to visit. They’re only about 45 minutes away from each other.
I live in south Idaho and its pretty nice here, its kind of a desert where I live but I go just north of where I live to see my parents and they live in a valley but its nice scenery, Idaho is really good for fishing and hunting though if that's your thing.
I live in coeur d alene, I was raised in Houston in my younger days and I have lived in a lot of different places and cda is def what I'm sticking with
This is easily a 3 to 5mil subscriber page. You guys are going places with that insanely good production quality and great personalities. Can't wait to follow along for the ride!
I had a tire and wheel setup like this on a kart that I used to race (for my home track). It was predominantly left hand turns on the track (sprint track), so we put the wide tires/wheels on the right side and I could take the corners VERY quickly.
Happy belated birthday, hope you did something fun. Girl is the best, hope we get to see more of her. For your birthday present, I'm going to ask my old man if he still has this small VW super charger for the barbie kart, but, being belt driven, it might not work, unless you swap to a different engine... I'll still see it he has it, I'm sure you guys can use it. ...and, I've said it before and I'll say it again, BEAUTIFUL landscapes and production quality, you guys are just going to keep growing, don't stop with the mint content!
Thanks man! That would be so cool! I’m sure we can find a home in a new vehicle for something like that. And I agree, the girl is the best! We’re gonna keep making videos - Edwin
Right on! Yeah, I'll have my old man look for it and I'll send you a DM on Insta for an address to ship stuff to. If only you guys were closer, I'd have all kinds of fun things to give you. I can only hold on to so much junk (aka good stuff) LOL!
@@GrindHardPlumbingCo a build I've recently been thinking about get one of those Cummins diesel power wheels trucks and find a small diesel motor and turbo it lmao idk if there even is a diesel motor small enough to fit but it would be badass lmao bud a custom lift on it rofl 🤣🤣🤣
nah 125 2 stroke is way faster and easier to work on. only hard thing is to get the custom pipe just right for all the power if the original doesn't fit
This entire video was a trip. Breathtaking camera work, soundtracks to match. I look forward to all future videos from you guys. Much love from Atlanta!
I like how this is just like any 'project car' some small things go wrong, but nothing too bad ever happens. love the build! 70MPH?!?!?.... thing rips! :D
You boys have gone IN on this project! I'm inspired! I watched the video where you installed the turdblo and have been hooked since! Much respect from the UK 🇬🇧 keep up the good work!
if you want this to "work" and not just make turbo sounds then there is only really one way to go about it needs to be a blow through and boost referenced carb a quick and dirty way todo this would be to enclose the carb in a airtight box (so the box would be flush with the motor size flange) and then pip the turbo into there so the exterior of the carb is at boost pressure, then add a fuel pump remember a carburetor needs to operate at ATMO so if you want blow thru then the carb needs to be at the same pressure as boost (or fuel injection there's a couple ready made kits you can get for small engines you also still have a oiling problem to much oil if you got oil burning then you are effectively blowing it past the gaskets which impacts the turbos ability to spool after all that ignition and timing boost requires a smaller plug gap and hotter coil I would take 5 thou out of the plug gap and see about rigging a hotter coil more cam is also always better these little bike/atv motors do not have a lot of cam separation which leads to some ERG which is bad on a turbo if possible a bigger over all cam particularly one with a wider lobe separation will do wonders
On snowmobiles you just put a tiny pressure hose on the top of the carb so the throttle does't lift, then you let the pressure go through the carb the "normal way" Then to have the carb flow the right level fuel whith the boost pressure you must have a linear fuel pressure regulator so the carb flow more fuel when the pressure comes. If i remember correctly it isn't harder than that. You can watch for example rx1 whith the mcxpress turbo kit. Greetings from Sweden (i hope i spelled everything right)
Supercharge it! AMR300 or blower from peugeot speedfight/satelis 125 compressor (might be hard to get in you area), that blower from peugeot with 1:1 puley ratio was pushing around 28PSI on 150cc GY6!
Dude, I am so glad I subscribed to this channel. You’re videography skills are insane, I was transported to a whole new world right from my chair. Great job!
Thomas Tumminaro that’s what I was thinking you’d want the exhaust side to be short rather than the intake side being short but I’ve never turbocharged a Barbie kart what do I know
With every new and improved engine mod', I'm waiting for the shop to literally implode, as the Barbie car pulls the building inside out with the "dyno" tether strap!
Great video, Barbie Car tuning, and that view at the end is AWESOME! Thank you! It's great to see all three of you guys in a video, great job, keep it up!
Man you have everything that im dreaming on, that house in the forest, that garage, that patience, and beauty girl, your lucky boy! Congratulations! heheh
@@joshuahebert9949 oh you do? You respond like you're 12. The exhaust mixtures aren't as compressible as you make them seem. Heat loss from the hot side has a greater effect then compressibility. Velocity of the fluid mass transfer is what you really need going in to a turbo especially if the turbo is to small. Which you should know with all your experience and a quick glance at the compressor map of the rhb31, this turbo is operating outside of the surge zone throughout the entire RPM with this 200cc engine. I've done a turbo or two.
Y'alls videos have been coming up on my thread for awhile now. I finally watched my first video. New sub. Good music guys. Not the normal horrible shit most Tubers use.
Seeing the Barbi car was in my suggestion box, so I had to sub. I like the production quality! I'm genuinely not crazy about heights, bit the bonus footage at the end is really great. Good times!
What's the name of that overlook ?! *Edit* Found it in other comments. "Spion Kop" Thank you guys for the content. Parts bin projects and beautiful country side.
Just did the same wheel and tire swap, we learned heating the tires with heat gun, they go on by hand, about 50 psi to seat the beads, race kart. Cool videos
I enjoy watching the build and tuning of the BARBIE CART. You guys have done a great job. Add the turbo is a great idea. I can’t wait to see the next follow up video on the speed test, once it’s finally tuned. After you guys have gotten all the bugs out I would love to see it run with a shot of nitro. It will be “ epic “.
@@GrindHardPlumbingCo Please get a hold of me I want one built if you're able to build me one like yours with the color black and with turn singals and with the exhaust coming out the back of it and if your willing to build me one call me at 5744012465
Absolute Masterpiece! Both the Barbiecar and the beautiful Video. I love how much effort you put into your productions, that is defenetly paying back! Thanks for entertaining me :)
@@GrindHardPlumbingCo Lolz. I love you guys too. Just ran across you recently and plan to do a marathon of your channel as soon as I get some time off. 👍👍 Maybe I'll discover that your channel is #1 afterall!
Grind Hard Plumbing Co you guys are in my top 4 along with Jimmy oakes, Tommyfyeah, and ricer miata. all genuine dudes who haven't let the money change what they are doing. keep doing what you love never forget that life is to short
Channels like yours prove that the youtube platform can still allow anyone with ingenuity and strong work ethic to build and promote their channel even with strong competition. Very Cool!! Keep up the awesome content.
Yes, center housing or center section are both correct in turbo lingo, but if you want to get really technical like you guys already are of course 😂. It is called the CHRA or “center section rotating assembly.” On the high quality turbos, that mating surface is machined with such a minimal to perfect tolerance, it seals. They can also have a large “properly sized” o-ring there like you did....ish lol. All of that is critical and needs to be as perfect as possible, so the tolerance between the compressor wheel and the housing is correct. I deal with turbos almost everyday, especially in the winter. Although now, the summers are just as busy if not busier because of the turbo SxS market becoming so HUGE! Awesome guys, awesome. PS. Dawn dish soap around the beads will help them seat much much easier. Rather than the WD-40. 😂 good work!
Love the video and the style that yall have going on! I think you should do more videos like the bonus videos at the end, I really like the cinematography and edits
You guys make it better every time. I’m always in my garage building go karts for my kids and making videos of us riding them. I’m gonna subscribe to your channel now
Grind hard plumbing co. Great name for any business!! But better then that.. BARBIE CAR! There's no shame in beating high doller CRAP, with , hot pink Barbie goodness.. 👍 keep it up.
Your video editing and camera handling is out of this world! I can’t believe how naturally talented you are with cameras.
Ya'll are making me want to see Idaho, it's never been on my list before but man does it look like fun.
Idaho is beautiful. Luckily, I have family there, so I get to visit at least once a year. You should go there. Also, my family lives in the same county as these guys do.
I live in North Idaho. I would say visit Coeur dalene or Sandpoint
Visit both Coeur d’Alene and Sandpoint. They’re both completely different, and both are great places to visit. They’re only about 45 minutes away from each other.
I live in south Idaho and its pretty nice here, its kind of a desert where I live but I go just north of where I live to see my parents and they live in a valley but its nice scenery, Idaho is really good for fishing and hunting though if that's your thing.
I live in coeur d alene, I was raised in Houston in my younger days and I have lived in a lot of different places and cda is def what I'm sticking with
Take a shot every time the exhaust piping changes.
Blanch Daddy Drowned in water
Then I would die
thonk
shots may be a little harsh
My friend passed out
The 17 dislikes are Barbie car “purists” who don’t appreciate tuning of the already badass Barbie car.
This is easily a 3 to 5mil subscriber page. You guys are going places with that insanely good production quality and great personalities. Can't wait to follow along for the ride!
Thanks man!!! That’s the dream! Thanks for following our crazy shenanigans!
He knew
Holy cow. The bonus video was awesome. Came to see the Barbie Kart and got blown away by the bonus video. Love the music
Barbie car, beautiful landscapes, doggos, and more Girl. All of that equals a fantastic video. Great job guys!
Those wheeeels are massive. They look like miniature Stanley Cups!
I had a tire and wheel setup like this on a kart that I used to race (for my home track). It was predominantly left hand turns on the track (sprint track), so we put the wide tires/wheels on the right side and I could take the corners VERY quickly.
Yeah they do lmao
narlycharley my gokart will kick the crap out of yours
Happy belated birthday, hope you did something fun. Girl is the best, hope we get to see more of her. For your birthday present, I'm going to ask my old man if he still has this small VW super charger for the barbie kart, but, being belt driven, it might not work, unless you swap to a different engine... I'll still see it he has it, I'm sure you guys can use it. ...and, I've said it before and I'll say it again, BEAUTIFUL landscapes and production quality, you guys are just going to keep growing, don't stop with the mint content!
Thanks man! That would be so cool! I’m sure we can find a home in a new vehicle for something like that. And I agree, the girl is the best! We’re gonna keep making videos - Edwin
Right on! Yeah, I'll have my old man look for it and I'll send you a DM on Insta for an address to ship stuff to. If only you guys were closer, I'd have all kinds of fun things to give you. I can only hold on to so much junk (aka good stuff) LOL!
Talked to my old man and he said that he still has the super charger. Next time I see him I'll remind him to bring it up!
.
@@GrindHardPlumbingCo a build I've recently been thinking about get one of those Cummins diesel power wheels trucks and find a small diesel motor and turbo it lmao idk if there even is a diesel motor small enough to fit but it would be badass lmao bud a custom lift on it rofl 🤣🤣🤣
Idaho is now on my bucket list, the scenery is amazing!! The Barbie turbo is awesome too.
Now you need a nitrous kit on her to get it really spoolin
I will need to look into that 🤔
@@GrindHardPlumbingCo a pocket bike nos kit would be perfect
Just get a decent 125 2 stroke engine for it an that will feel like you have nos. plus easy maintenance
Grind Hard Plumbing Co yeah just a little cartridge kit
nah 125 2 stroke is way faster and easier to work on. only hard thing is to get the custom pipe just right for all the power if the original doesn't fit
This entire video was a trip. Breathtaking camera work, soundtracks to match. I look forward to all future videos from you guys. Much love from Atlanta!
I like how this is just like any 'project car' some small things go wrong, but nothing too bad ever happens. love the build! 70MPH?!?!?.... thing rips! :D
Haha! Yep, pretty much. It breaks every time we use it, just like a real project car. 🤣 I was really hoping for 80mph...
The bonus footage is always so sick! Tops off every video
Man that was a beautiful scenery at the end great vid.
You boys have gone IN on this project! I'm inspired! I watched the video where you installed the turdblo and have been hooked since! Much respect from the UK 🇬🇧 keep up the good work!
if you want this to "work" and not just make turbo sounds then there is only really one way to go about it
needs to be a blow through and boost referenced carb
a quick and dirty way todo this would be to enclose the carb in a airtight box (so the box would be flush with the motor size flange) and then pip the turbo into there so the exterior of the carb is at boost pressure, then add a fuel pump remember a carburetor needs to operate at ATMO so if you want blow thru then the carb needs to be at the same pressure as boost
(or fuel injection there's a couple ready made kits you can get for small engines
you also still have a oiling problem to much oil if you got oil burning then you are effectively blowing it past the gaskets which impacts the turbos ability to spool
after all that ignition and timing boost requires a smaller plug gap and hotter coil I would take 5 thou out of the plug gap and see about rigging a hotter coil
more cam is also always better these little bike/atv motors do not have a lot of cam separation which leads to some ERG which is bad on a turbo if possible a bigger over all cam particularly one with a wider lobe separation will do wonders
On snowmobiles you just put a tiny pressure hose on the top of the carb so the throttle does't lift, then you let the pressure go through the carb the "normal way"
Then to have the carb flow the right level fuel whith the boost pressure you must have a linear fuel pressure regulator so the carb flow more fuel when the pressure comes.
If i remember correctly it isn't harder than that.
You can watch for example rx1 whith the mcxpress turbo kit.
Greetings from Sweden (i hope i spelled everything right)
Mr Olsen correct
One of the sweetest go karts I've ever seen!
You should take the barbie cart over to cars and cameras
Not a bad idea, I agree they should.
We’re at the based out of? I will try and make that happen
@@GrindHardPlumbingCo north Carolina
They're in Washington, North Carolina.
Hunter Fisher North Carolina I’m pretty sure
Everything cool, a Barbie cart, a Westfalia, and amazing views!
You should put the old front tires on the back to do insane burnouts
The fastest barbie car I've ever seen, nice dude!!! 👍👍👍
Supercharge it! AMR300 or blower from peugeot speedfight/satelis 125 compressor (might be hard to get in you area), that blower from peugeot with 1:1 puley ratio was pushing around 28PSI on 150cc GY6!
Dude, I am so glad I subscribed to this channel. You’re videography skills are insane, I was transported to a whole new world right from my chair. Great job!
Getting the barbie cart tuned by ben shapiro
What a spectacular area to live and visit in your video guys. So envious right now but at the same time really impressed.
@22:19 --> onwards.... All I needed to see to brighten up my day
Dang you do beautiful work. The bonus footage is incredible. Thanks yall.
OMG, the view at the end of the video, Idaho on the list now
That end scene was super well shot and edited. And the Barbie car is a cool project unlike much else I've seen on RUclips. Keep it up 👍👍👍
Gotta love those eBay turbos.
My new-found youtube channel that literally ticks every box, bravo guys.
Have you considered mounting the turbo much closer to the exhaust port?
Thomas Tumminaro that’s what I was thinking you’d want the exhaust side to be short rather than the intake side being short but I’ve never turbocharged a Barbie kart what do I know
That is the most awesome thing i ever seen. 👍👍👍
With every new and improved engine mod', I'm waiting for the shop to literally implode, as the Barbie car pulls the building inside out with the "dyno" tether strap!
Great video, Barbie Car tuning, and that view at the end is AWESOME! Thank you!
It's great to see all three of you guys in a video, great job, keep it up!
That little car rips 😂👌🏻
Man you have everything that im dreaming on, that house in the forest, that garage, that patience, and beauty girl, your lucky boy! Congratulations! heheh
N Idaho looks absolutely beautiful. Im convinced now to sell my house and move there
The cinematics are out of this world!
Such an aweseome video!
Keep it going!
You took your gal to the right place bro
This build is the sickest on RUclips. I love this channel
Relatively large diameter tubing and too long of an exhaust manifold runner will produce low boost.
Yep turbo should really be on the exhaust side. Wrapping the header would help keep in the heat.
This is not true. It will not effect peak boost but it will effect response (turbo lag).
Steven is right, Joshua is wrong.
D. Ryan no Joshua is right. How much turbo tuning have you done? Because I have a lot of experience.
@@joshuahebert9949 oh you do? You respond like you're 12. The exhaust mixtures aren't as compressible as you make them seem. Heat loss from the hot side has a greater effect then compressibility. Velocity of the fluid mass transfer is what you really need going in to a turbo especially if the turbo is to small. Which you should know with all your experience and a quick glance at the compressor map of the rhb31, this turbo is operating outside of the surge zone throughout the entire RPM with this 200cc engine. I've done a turbo or two.
The bonus shots at the end were awesome !!
5:18 Introducing Grind Hard mechanic's camo clothing line! lol
Sponsored by Marv from Home Alone
hearing the rain hitting your roof, while deep into a Minnesota winter makes me want summer sooooo bad
Y'alls videos have been coming up on my thread for awhile now. I finally watched my first video. New sub. Good music guys. Not the normal horrible shit most Tubers use.
Seeing the Barbi car was in my suggestion box, so I had to sub. I like the production quality! I'm genuinely not crazy about heights, bit the bonus footage at the end is really great. Good times!
What's the name of that overlook ?!
*Edit* Found it in other comments. "Spion Kop"
Thank you guys for the content. Parts bin projects and beautiful country side.
Just did the same wheel and tire swap, we learned heating the tires with heat gun, they go on by hand, about 50 psi to seat the beads, race kart. Cool videos
I didn’t know that 70 show Hyde had a RUclips channel
I enjoy watching the build and tuning of the BARBIE CART. You guys have done a great job. Add the turbo is a great idea. I can’t wait to see the next follow up video on the speed test, once it’s finally tuned.
After you guys have gotten all the bugs out I would love to see it run with a shot of nitro. It will be “ epic “.
Now what you need is a tachometer
I love the sewn on looking fender flares, I have never seen that before.
thank you guys for protecting your ears while messing with this thing
Only thing i hate about this channel is how under rated it is lol
Notification squad!! I insta click all uploads lol
Awesome!
Love the videos. Thanks for sharing the builds & this mountain top view is amazing. Wow!
I wonder how much this barbie car will be worth when finished.
Not much... Right now I've had go-carts that ran better than this thing.
its so cool watching the front tires heat up in real time at 20:44
More 300 two stroke drift trike thing!!!!
We have to race it in our Snowmobile powered scooter.
Heck yeah, can I come live with you? Jk
i give so many plays to recall! that song gUUUT af, crazy edwin made that as well, also bring back them BMW builds
YO i didn't know ben Shapiro was a mechanic!!
I got scared when i saw the doggos so close to the edge of the cliff also watching the whole build series' on all the power wheels toys
Where is that that you were at in the bonus video? Couldn't find it/ haven't heard of it and I live in Spokane and it looks like a sick place to visit
It’s called Spion Kop. In the Coeur d’Alene National forest.
Grind Hard Plumbing Co oh dang I was just out there when I rode the Hiawatha, wish I made that detour
It’s ALWAYS a pleasure watching you guys vids. Thanks man 👍🏾
Hey girl!
Hats off,you guys are relentless!!!! Great job enjoyed vid again.
DAANG, SHE THICC. Those tires... mmmmm
💯💯💯
More Phat Booty shots please.
Do you watch Offtheranch or demoranch by any chances?
of coarse
@@GrindHardPlumbingCo Please get a hold of me I want one built if you're able to build me one like yours with the color black and with turn singals and with the exhaust coming out the back of it and if your willing to build me one call me at 5744012465
Absolute Masterpiece! Both the Barbiecar and the beautiful Video. I love how much effort you put into your productions, that is defenetly paying back! Thanks for entertaining me :)
1: hoonigan
2: grind hard
Lolz.
Uh.... no.
1: Boosted Boiz.
2: Cleetus.
3: Everyone else.
Nice list! What do we have to do to get that #1???
@@GrindHardPlumbingCo Lolz.
I love you guys too.
Just ran across you recently and plan to do a marathon of your channel as soon as I get some time off. 👍👍
Maybe I'll discover that your channel is #1 afterall!
@@GrindHardPlumbingCo The new wheels look great!
Grind Hard Plumbing Co you guys are in my top 4 along with Jimmy oakes, Tommyfyeah, and ricer miata. all genuine dudes who haven't let the money change what they are doing. keep doing what you love never forget that life is to short
Came for the car vids, stayed for the sick extra videos at the end
When yall goin to the track
As soon as we find someone that will let us on!
Channels like yours prove that the youtube platform can still allow anyone with ingenuity and strong work ethic to build and promote their channel even with strong competition. Very Cool!! Keep up the awesome content.
More dog pets...
Haha
Your girl seems like a keeper. Good old-fashioned girls who appreciate manly men who work on motors are always keepers. :)
WD-40 isn't the best thing to use for mounting lube. Petroleum breaks down rubber.
Those tires will be run down before that has a chance to happen
Damn you guys living the dream out there at Idaho. And bonus video is so beautyful. I really wanna go there now..
Sir my friend build suzuki fx 125 turbo.. U can see motorcycle.. Tq sir.. U just write suzuki fx turbo.. Sory my english not good.. Im from malaysia..
Youre guys' camera skills and editing is impressively good tbh.
Since when was Ben Shapiro an engineer
😂 😂 😂 😂 😂 😂 Lolling at 553am
Yes, center housing or center section are both correct in turbo lingo, but if you want to get really technical like you guys already are of course 😂. It is called the CHRA or “center section rotating assembly.” On the high quality turbos, that mating surface is machined with such a minimal to perfect tolerance, it seals. They can also have a large “properly sized” o-ring there like you did....ish lol. All of that is critical and needs to be as perfect as possible, so the tolerance between the compressor wheel and the housing is correct. I deal with turbos almost everyday, especially in the winter. Although now, the summers are just as busy if not busier because of the turbo SxS market becoming so HUGE! Awesome guys, awesome. PS. Dawn dish soap around the beads will help them seat much much easier. Rather than the WD-40. 😂 good work!
"Girl" is beautiful. Native American or Hispanic?
Argentinian :)
@BRICKCITY9MM yo what the fuck
holy shit, some of those bonus video shots are gorgeous
You need a wider body
True!
I know it was a pain but the turbo just made it that much more amazing!! hope you get a better one and put back on
Wow, I didn’t know Ben Shapiro works on Harley’s and pink gokarts in his spare time
Woke up at 7 30 am. In the UK to be gifted with another great vid love this kart
Idaho ingenuity 👍making our state proud
Big love from new Zealand you guys get me through the week ! Keep it up
Thanks man!! This is the kind of comment that keeps us inspired!
Every time I see the Barbie kart I wanna make one. I want to do a gasser death trap though. If I can find a 50's car I will. Love the video!
You guys are the right kind of crazy and I love it!!
I have so much love for y'all and these videos. Never done it before, but joing the notification squad is so worth it here. Keep up the great work!!
Awesome Barbie car Awesome footage Awesome bonus Awesome girl ....nuff said
The bonus videos are so sick! Stoke/10!
I appreciate the longer length video!
Love the video and the style that yall have going on! I think you should do more videos like the bonus videos at the end, I really like the cinematography and edits
You guys make it better every time. I’m always in my garage building go karts for my kids and making videos of us riding them. I’m gonna subscribe to your channel now
Grind hard plumbing co. Great name for any business!! But better then that.. BARBIE CAR! There's no shame in beating high doller CRAP, with , hot pink Barbie goodness.. 👍 keep it up.