Building a Multi Function Table Saw Jig
HTML-код
- Опубликовано: 26 сен 2024
- Watch this video in HD 1080p • Build a Multi Function...
Visit our school website at: www.wnwoodworki...
Connect with us!
Twitter: / wnwoodworks
Instagram: / wnwoodworks
Facebook: / wnwoodworks
![Cody Johnson - I'm Gonna Love You (with Carrie Underwood) [Official Music Video]](http://i.ytimg.com/vi/yy9PuYMU29g/mqdefault.jpg)
Moral of the story:
Never unsubscribe from quality RUclips contributors.
Welcome back William. I'm glad you're back, imparting your much appreciated know-how 👌😉👍
Isa, Thank you. I'm blessed to have subscribers like you. You're Awesome!
I really appreciate your videos. You are a fantastic teacher and break the steps down so well that even a caveman like me can follow. Thanks for taking the time to pass down good information
Glad to see you back. You have a lot of people who were waiting for your return. Now I know I can actually add a tall fence to my old DeWalt table saw.
I love William's videos - they are the best available!
I was about to make this jig but then realized I had bought those Microjig dovetail clamps which allows you to clamp a board to your existing fence from behind utilizing dovetail channels. So instead of making William's box I duplicated those functions with just two pieces of 7" tall MDF. One piece has the rabbet groove and the other piece doesn't. The advantages of using these clamps are only 2 pieces of wood required and it clamps tight to your fence; it also takes up less room for storage and no cumbersome workarounds for oddly configured fences. The downside, of course, is the expense of the clamps and dovetail router bit - not an issue for me since I already had them.
Anyway, just a simpler albeit more expensive alternative.
The dry humor is not lost with me! Thanks for making more videos. This is great
Thank you. Always get a lot out of your teaching. Thanks!
Very glad you're back. I've checked almost every day hoping for a new video. Thank you.
Great to have you back! Thanks for sharing Buddy!
Welcome back. I have missed the awesome content, the presentation style and the sense of humour.
Thank You Everyone for such a warm welcome back. I woke this morning to check if anyone watch my video and was overwhelm by the response. Your love and support touched me deeply. I didn't think anyone would miss another woodworking You Tuber. You guys are Awesome! I Love You All. Please accept my deepest gratitude, I am truly humbled and blessed by subscribers like you. Thank You so very much.
William
Glad to see you back here
I agree with all. Good to see you back.
SOOO glad to have you back, Sir!
My woodworking skills have suffered in your absence!
Thanks for making more videos!
Super hand model = subscribed. Well, that and the excellent video. Welcome back.
"I don’t touch MDF or plywood because all my projects are out of solid wood because I’m a real woodworker." I laughed out loud when you said that. Thanks for your time in making the video and a great jig.
Awesome to see you again. Hope all is well for you. Always enjoy your videos. Thank you.
So great to see you back!!! Going to have to build your jig after the holiday rush. Thank You for the information.
I was so excited when I saw you had a new video out. Thank you for sharing and I hope you’re able to put out more in the near future.
Welcome back. Look forward to your work.
Always admire the precision you use, thanks for all the great content and laughs
I always enjoy your videos (and understated humor) and wish they came out more often. I'd love to see some of the ways this jig gets employed in your work. Thanks William.
Hi Steve, here's the link to the video that explains the uses for this jig.
ruclips.net/video/AddH8IgL7wY/видео.html
Another great example to add to my collection! Thanks William!
As many have said welcome back! Hope to see many more of your entertaining and helpful videos in 2018.
Do you know what? I watched your build video before watching the fence in action. Ha
I'm looking for a design of a fence to improve or replace the one of my cheap Stanley table saw. Looks like your design could improve it a lot without much tweaking! It's just what I need: Taller, sturdier, with a tool tray... Cool.
Now I'm going to watch it in action! Ha
Looks like you have many more interesting videos!
Cheers from Peru!
Been meaning to make one of these for a while now......ok you talked me into it😃😃👍👍
Thanks for posting the video......was hoping you'd come back.......
Cheers
Always enjoy your videos and your humour lol keep on posting ... Thanks Garry from the UK
Thanks William! I hope this means we get get to enjoy more of your videos.
SO glad to see some new "content" Mr. NG - looking good - don't be a stranger.
TOP - THX for being back
You're alive! Yay!
Welcome back :-)
Thought the same 😃
Your videos are always very detailed and informative. Thank you! Always learning on your channel!
So nice to see you back!
Welcome back! Great to see you again.
Really enjoy your teaching style. Wish I wasn't all the way on the other coast!
keep up the great work brother!
Good to see you back! Congrats on the handmodeling.
:) thanks
We missed you!
William Ng is back! Nice to see you again, you super hand model. :)
thanx for sharing your jig with us
1st time viewer ,, nice workspace!
Long time no see! Happy to see your videos again!
Yes, welcome back!
I absolutely love your videos! You have been very inspirational for me and I just want to thank you for sharing!
Great to see you back hope you have been well. Great video thank you for going to the effort.
Good video and thanks for being a great teacher.
Welcome back. Love the style of presentation and humor. Happy New Year!
Welcome back! Love watching your vids and have missed them dearly!
Thanks you are the best. Glad you found time to post.
Excellent video and process. Thank you so much sharing. Also, much success with your second job.😉
Welcome back !!
So glad your back! Great video. Thank you
Good stuff, William. Love the thousandths of an inch ...
Welcome back! Been patiently waiting for some new videos.
Please don't ever feel you have to qualify anything like using brads. Don't agree, go build your own good luck. Great video!
Woo woo! Great new site, excited for your online coffee table class !
Welcome back. From one super hand model to a good to see you but I must say I was on pins and needles when you were handling the plywood without gloves! One splinter and you’ll be out of work for a week!!!
HaHa Don't worry, my hands are insured just like J Lo's (Jennifer Lopez) butt
Good to see you. Thought I have seen those hands somewhere!
New to your channel and just want to know how much I enjoy your presentation and content. Looking forward to many more videos.
Great Video as always. It's been way too long since the last one. Love your humor. Also, this build was easier than Mike Tyson trying to win a spelling bee (Quote from past video).
:)
thanks for the video I made the same jig with one piece of wood and dovetail match-fit clamps
Sweet! You're back. I missed the vids.
Good to see you back!
Thanks for the video!
12:11 "I don't want to jeopardize my other career as a super hand-model." Hahahaha I lost it.
yes his jokes are epic :)
I did laugh out loud at that one.
He's back!
thanks for the video. I was going to seriously over complicate this jig with dados and all the other fixins for no good reason. p.s. we missed you. lol
I’ve seen sliding boxes, do you prefer the stationary kind? You’re easy to watch, I enjoy your information!
Great video and I did notice your lovely hands!
HaHa Thanks for the laugh, this put a smile on my face and made my day.
Yep one of my favorite you tube guy's also thanks for posting hope to see you soon
chouette ! vos videos me manquaient...
cordialement
Great video!
Been waiting a long time for more content from you. Glad to see you’re back! Can you make a vid where you demo the uses of this fence?
ruclips.net/video/AddH8IgL7wY/видео.html
Welcome back! Now that you’re back, any chance you can make the video referenced in your 5 cute to perfect cross cut sled video about making perfect Miter sleds? I’ve tried but can’t find an easy way to adjust the fence and or measure the error on the miter...
Dude, where have you been? Welcome back
Thank you!
Papyrus! No one tell Ryan Gosling!
Glad to see you back. Curious, why use the cabinet saw with a cross cut sled when you have that felder slider?
Thank you.
You know whose hands they remind me of? Ray McKigney.
I learn a lot watching your videos! Really happy to see you back!
Great videos William. How many inches of clamp throat do you need to build a 7" tall jig? If the tick line is 3" up, wouldn't a little over 4" of clamp throat be enough?
yea you're back!
Love this! The only thing I'm confused on: Why, when trying to determine the length of the fence (as part of the final board length), would you measure the diagonally? Wouldn't you simply measure front end to back edge?
Because I put the fence on diagonally not straight up and down. Watch it at 3:47
Ahhh, got it! Thanks again for all the great videos!
Got it! Worked out great on my build! Really like your shop made push sticks. Do you sell any sort of template for those? I really like the larger dimensions (height + solid upper) and the angle.
Where in tarnation have you been? We've missed you
Do you ever use an L-fence on the table saw? There are some advantages to those as well, especially for mitered boxes.
Thank you for this.
Are there different grades of Baltic Birch?
Hi William..
I recently saw this video and wondered what type of finish you use on your jigs and fixtures..thanks! 😉👍
I normally don't put finish on my jigs and fixtures but this fence I wanted it to be some what slick so I just wax it. No top coat.
@@wnwoodworks Thanks for getting back 😉👍
Welcome back William, I was thinking of going into super hand modeling myself. Any pointers for us just getting into the business? :-)
HaHaHaHa Stop it!
The poise and grace you demonstrate with your hand here ruclips.net/video/qfNYWG0Mj8E/видео.html is really top notch. However I did have a question regarding the one that you demonstrate with your Felder. "Shirley" you would say that that one is fitting a little more snugly than you would like?
All it needed was a little finish and wax. Take a look at the video again I re uploaded in HD 1080p ruclips.net/video/gwYZsNvSYO0/видео.html
I did this for you. I got lazy in the video and did not put finish and wax on it. Thanks for busting my balls. :) HaHa
Excellent!! And yes, the jig fits much nicer on the Felder now. BTW, Happy New Year!
Hi. I just want to say thanks for all your video tutorials. I have just started getting into woodwork and came across your channel when looking for jigs for woodwork. A lot of it is over my head so was wondering if you could recommend any books for a beginner. In another video you said you studied engineering, now though you do woodworking classes. How did this happen? Kind regards Lee
Missed your sense of humor!
What was the point of that rabbit toward the end of this video? Seems you would want a fence that sits flush and square on the table saw for cutting small pieces.
Sorry this a sequel to a video I've made. Here's the link. It show all the different uses for this jig.ruclips.net/video/AddH8IgL7wY/видео.html
The final part... What is the "rabbit" for?
My previous video explains all the uses. Here's the link ruclips.net/video/AddH8IgL7wY/видео.html
You've not seen my fence....it sucks. The only thing is good for is the bin.
HaHaHaHa I'm laughing with you not at you. Been there, I get it.
First! Big fan!
Great to see you back William. Looking forward to more videos.
And potato camera were chosen. I mean, how much is compressed this video?
Sorry about the video quality. I film at 1080HD but got compressed to 360p. Found out why, RUclips upgraded it's format and will accommodate 4K . That's what happens when I'm away for so long. Will try to upload again at 1080 HD. Thanks for your understanding.
Just uploaded the video again. This time at 1080p HD ruclips.net/video/gwYZsNvSYO0/видео.html
Thanks for the video however the video quality is very low and hard to watch.
Just uploaded the video again, this time at 1080p HD ruclips.net/video/gwYZsNvSYO0/видео.html
Didn't realize RUclips changed format. That's what happens when I 'm away for so long.
I don’t understand the purpose of the rabbet in the bottom of the jig.
ruclips.net/video/AddH8IgL7wY/видео.html
Thank you.
Cowboy thanks. I had the same ? He uses it for trimming edge banding & excess box joint protrusion.
Is anyone else having video quality issues......settings says that video was only downloaded in 360P
Sorry about the video quality. I film at 1080HD but got compressed to 360p. Found out why, RUclips upgraded it's format and will accommodate 4K . That's what happens when I'm away for so long. Will try to upload again at 1080 HD. Thanks for your understanding.
Just uploaded the video again, this time at 1080p HD ruclips.net/video/gwYZsNvSYO0/видео.html
Didn't realize RUclips changed format. That's what happens when I 'm away for so long.
So glad you're back again! A couple of times I was tempted to unsubscribe Since you was no longer uploading... I'm glad I didn't!
Gianluca Salvador what's the point?? Why unsub if they're not producing videos?
I feel being subscribed to a channel as a sort of relationship with the channel's owner: he communicates with me through his videos and I can communicate with him through the comments section or with all the ways he want to provide to us (such as instagram, facebook and so on). But to establish this relationship you need contributes from both sides...
It was almost one year from his latest video and because of this relationship point of view I stated I was tempted to unsub.
This is NOT a way to judge the fact that there was no video since one year: it's his channel and he can do whatever he want with it: I can only and always say thanks to him for the great contents he shared with us with this channel. Actually it's exactly for this reason that, at the end, I didn't unsub.
the jig is pretty interesting. Too bad the quality of the video is so poor: 360 nowadays is very insufficient.
I shoot at 1820 HD Not sure why it degraded to 360. Will look into it.
Just uploaded the video again in 1080p HD. ruclips.net/video/gwYZsNvSYO0/видео.html
That's what happens when I'm away for so long and didn't realize technology and RUclips is way ahead of me.
Hi Everyone, Sorry about the video quality. I film at HD 1080 but got compressed to 360p. Found out why, RUclips upgraded it's format and will accommodate 4K . That's what happens when I'm away for so long. Will try to upload again at 1080 HD. Thanks for your understanding.
Sorry about your mother you'll see her again
Thank you.