How to take apart IKEA Sekond lamp cord set
HTML-код
- Опубликовано: 7 ноя 2024
- This quick tutorial shows how to disassemble IKEA Sekond and take apart IKEA Sekond lamp cord set. It's super simple! The lamp making possibilities will be endless once you see this.
SUBSCRIBE TO MY CHANNEL:
www.youtube.co...
More how-to projects at www.diymontreal...
Link to How to make a copper pipe wall sconce www.diymontreal...
Follow me on Instagram / diymontreal
Follow me on Pinterest / diymontreal
Follow me on Facebook / diymtl
Follow me on Twitter / diymontreal
just a small tip - if you are having problems releasing those two cables from the holes, you can simply cut it and use the other pair of holes for the connection. if you use a stranded cable, you should probably tin the ends with some solder or use some appropriate ending on it.
Need to see how to take down the lampshade (e.g. Melodi) to clean it. Really impossible without breaking it.
Wow thank you so much ❤
When you put the two wires back during reassembly, does it matter which hole they go in?
Good question. Have you found an answer in the last 4 years?
Anyone know where to get just that part (the clear cone shaped cord grip and the screw in socket with screw on ring)?
Is the cable stranded?
No it's not
It was for a short while, then it got rescued lol
Tried this, but the wire connectors break when you insert the flat head screw driver...
Same happend to me. Had to cut the wire and use a soldering iron to connect new wire.
there are two small pads or pins inside "the middle hole", you have to move those pins (or maybe only the one that is next to the wire) aside. i used a strong paperclip and while applying the pressure, you have to gently try to set the cable free.
Thank you!
Thanks
thanks
Why did you disassemble it, it won't work now lol
Haha not to worry, I reassembled it afterwards! I needed to thread the wire though a pipe for a lamp I was building.