Hi Dzan, thanks for video. I am having an issue getting the corrugated part of the panel to repeat. I get two section of corrugated panel with a big stretch of flat space that grows with the size of the wall.
That happens sometimes. It is due to the amount of bends. Make a profile that has less bends for the panel or make a bend as a mullion profile and repeat the mullion instead of the panels.
Thanks Dzan, I'm have issues with door and window openings not aligning properly. Is there another way to create a corrugated metal panel using a sweep method but have the sweep run vertically and then repeat horizontally?
@@davinhartley6099 try using a beam system where the reference plane is set to vertical. You can also try to create a custom in-place family and array it.
Thanks for the video! I need to edit the profile of the curtain wall to a round shape. When I edit it, the panels that are being affected by the profile, Revit is automatically changing them to Glazed panels and it is not letting me use the corrugated panels. Any thoughts on how can I resolve this problem?
not sure what you mean by round shape....custom profiles for curtain panels need to be simple with not too many complex curves...otherwise, it defaults back to glazed panel. Hope this helps
@@DzanTa Thank you for your prompt reply. It is also happening when I put a wall opening. I have my curtain wall set it up with my vertical grid spacing at a 3' fixed distance and my horizontal grid at 20', that is the actual panel size given by the manufacturer. When I make a wall opening for my 7' high door there is reaming 2' panel. This 2' panel is the one that Revit is changing to the glazed panel instead of the corrugated panel.
Hi! I am getting an Error - can't create sweep message and I can't figure out why. I figured it probably has something to do with how I've drawn my profile, but I've messed around with it a few times now and still no luck. Any suggestions? Thank you!
I've actually learned that if you're offsetting and trying to tab in to select all lines and it's not working you can off click once then tab in and it'll work for ya.
Great video, can you use this method to create horizontal panels. I created the extrusion on the left view, but when i add panel to storefront it doesnt repeat vertically. It is only 8' tall
Any way to edit the profile of the wall when complete? or "attach top/base" I am getting an error when I try to make the wall profile work without a perfect rectangle?
Edit Profile on a wall should work unless the curtain wall spacing is messing things up. Attach Top/Base should work too. I would need to look at the file you made. Get with me tomorrow (Thursday)
@@DzanTa sir if you use the mullion profile like as the curtain panel profile then it's possible. also i am sending my sample file where you can see also a corrugated sheet Gable Roof. Thanks
Hi Dzan Thank you for your video. I have tried to make a metal panel but I keep getting errors when I try and use it in my project. Is there a chance that you could look at it for me? Thank you Tony
I've comeback to this 3 times and have gone thru it step by step. Every time i get to the part of loading in the metal wall panel it loads into new file but half the panel drawn is corrugated and the other half is just a smooth wall. Am i not locking something correctly making the metal wall family?
4th try was successful! Turns out under properties for my modified curtain wall I changed the max spacing to be 4ft like the panel width was and that resolved it. Now to cut out openings is my next step. Thanks again! :) Dzan Ta
Hi I am keep getting error (There is no open view that shows any of the highlighted elements. searching through the closed views to find a good view could take a long time.)
I would start by closing the file first. Then opening it to 1 view. Then do whatever sequence of events you performed to see if you get the same error. Is the error occurring when you are in family making adjustments are when you are loading it into a Project file?
I looked at your family. Instead of creating a profile with a lot of s curves and making a panel that repeats....do this instead: Create a profile sketch of just 1 s curve as a Mullion Profile. Then load this into the Project. Use the Properties to swap out the mullion profile with your custom one. Then make sure the repeating distance is only the length of 1 s curve distance. I hope this helps.
A Curtain Wall has a properly called Automatically Embed. If this feature is checked, the curtain wall will be hosted by the wall you draw it in. If you are talking about a door, you can load in a curtain panel door and then select a panel to switch it to the curtain wall door.
@@DzanTa tkyu sir, but my door is from metal rolling door because I use this coggurated for my factory design, when i created a hole from "opening wall" in revit is success 90% the rest is failed because the coggurated wall become a glass again. Can you have the solution sir? Tkyu
@@I_kiza_real If your door is a typical door that is hosted by a wall, you can switch your panel out to a wall. Then, insert your rolling door into that wall so it will be hosted by that wall within the panel within the curtain wall.
hi, good video but i have a problem when i try to load the metal panel mafily to the generic model i get an error that there is no loops. what do you think about that!
Hi! Thanks you alot for this information. I have another question to do. It can change the color of the curtain wall? (sorry for bad english, not main lenguage)
george alhassan Do you mean an angled ridge vent family that goes oner the top of the ridge of a roof?...if so, i made one already and will send tomorrow morning
This is beautiful, thanks for the tutorial. But using this system it's not possible to cut holes/create different openings shapes on it for doors, windows and etc, therefore, it becomes pretty much useless.
Actually, if you create this panel as a custom vertical wall, you can host a door or window in it. You can also use the wall opening command or face based opening command to make holes. Since it's a wall, you should be able to Edit Profile too.
sorry....I looked everywhere...I don't have the Revit family anymore. I have only the mp4 video I made to upload to RUclips. If I have time, I will make it again tomorrow or Thursday to upload to my Dropbox and send you a link then.
@@DzanTa Thank you for the quick reply, I've tried redrawing my profile sketch and it didn't change the issue. I'm able to make the metal panel family, I can load it into my Revit project, but when I try to change the curtain panel to my new profile, that's when I get that error message.
@@victoriaunruh5761 the curtain panel in the project may be drawn such that it cannot accommodate the number of panels and spacing...try redrawing the host curtain panel as a simple straight wall, then a curved wall, then a wall with multiple curves of varying radii to test your custom panel.
it should work in 2017...this is just making a custom family. the principles apply to the family, not the version of the software. If you can send me a video of what you are doing, I can better understand where it isn't working for you.
I tried your tutorial so that I can make a roof out of it but I can't make this work. I must be doing something wrong but I don't know what... great tutorial though.
Thank you, I did that and it worked ! But now it appears glazed while I put the parameter so it looks full. No matter what I do it only appears in a weird transluscent purple in the project... 🤨
@@grimmsdottir5993 Open up the custom curtain panel family you made. select the geometry. assign it a material in the Properties. Save and reload into project.
@@aint_just_a_support5780 create the profile as a custom curtain panel, load I to project, create roof using slope glazing system family and swap curtain panel definition.
Hi Dzan Ta would you mind checking my Revit project that I have mailed to you? many thanks. experiencing some problems and I believe it's due to alignment and locking incorrectly.
The wall I created works well up to 5 feet wide. longer than that it stretches normal wall then it repeats the pattern after 10 feet. So what I have is 5 feet wide of the corrugated wall then about 10 feet flat, then 5 feet corrugated again. There is NO loop ? Her is how it looks : i67.tinypic.com/1znqsfb.jpg
Check your sketch to ensure the profile is aligned, dimensioned and locked properly. What is the realistic width size of the manufactured panel? Use the vertical spacing property to control this width. Theoretically we should be able to make a single giant panel using your custom profile swap such as in the Curtain Wall 1 type. Send me your profile sketch so I can play with it. Dzanta@gmail.com
When you guys make these videos it would be helpful to load it and use it in a model as a demo and show how it interfaces with a sloped roof above and window openings. The problem with using curtain walls as the motif is that this family wont attach to the underside of an angled roof and it also doesn't like clipping for windows..doors yes but not windows.
Curtain walls can attach to the top of a roof. You might have to edit profile to make it work. Panels can be swapped for panel doors. Or, you can swap a panel for a wall and insert a door in that wall. I have another video that shows the application of it...just dig into my channel. You'll find it.
legend, just helped my troubleshoot my cladding profile. cheers!
Hi Dzan, thanks for video. I am having an issue getting the corrugated part of the panel to repeat. I get two section of corrugated panel with a big stretch of flat space that grows with the size of the wall.
That happens sometimes. It is due to the amount of bends. Make a profile that has less bends for the panel or make a bend as a mullion profile and repeat the mullion instead of the panels.
Thanks Dzan, I'm have issues with door and window openings not aligning properly. Is there another way to create a corrugated metal panel using a sweep method but have the sweep run vertically and then repeat horizontally?
@@davinhartley6099 try using a beam system where the reference plane is set to vertical. You can also try to create a custom in-place family and array it.
Can you tell me why my pattern will not repeat. I can only draw the pattern the length of the pattern then it just stretches the pattern.
You probably need to constrain it better
Can we use same family as roof type or just use it like wall type???
You can use it as a sloped glazing type where the panels are using the corrugated profiles
can you use this on a vertically curved wall by making it as a mass ?
In this case no. You will have to use an adaptive curtain panel family on a divided surface such as rhomboid. Use the conceptual massing environment.
Thanks for the video! I need to edit the profile of the curtain wall to a round shape. When I edit it, the panels that are being affected by the profile, Revit is automatically changing them to Glazed panels and it is not letting me use the corrugated panels. Any thoughts on how can I resolve this problem?
not sure what you mean by round shape....custom profiles for curtain panels need to be simple with not too many complex curves...otherwise, it defaults back to glazed panel. Hope this helps
@@DzanTa Thank you for your prompt reply. It is also happening when I put a wall opening. I have my curtain wall set it up with my vertical grid spacing at a 3' fixed distance and my horizontal grid at 20', that is the actual panel size given by the manufacturer. When I make a wall opening for my 7' high door there is reaming 2' panel. This 2' panel is the one that Revit is changing to the glazed panel instead of the corrugated panel.
@@adrilemmen you may have to delete the panel and recreate it custom. Hard to diagnose.
I tried to draw this but the sheet in horizontal position and I get error I think I will have to draw again
Hi! I am getting an Error - can't create sweep message and I can't figure out why. I figured it probably has something to do with how I've drawn my profile, but I've messed around with it a few times now and still no luck. Any suggestions? Thank you!
Never mind I figured it out! I think it had too many segments so I just did fewer repetitions of the corrugation.
Try keeping the sketch of the profile simple and lock the lines to the correct reference planes
can you apply this to a curved canopy?
I would use Roof by Extrusion command
Keep up the good work! Nice tutorial!
Thank you!
I've actually learned that if you're offsetting and trying to tab in to select all lines and it's not working you can off click once then tab in and it'll work for ya.
Great video, can you use this method to create horizontal panels. I created the extrusion on the left view, but when i add panel to storefront it doesnt repeat vertically. It is only 8' tall
I donnot think you can. You may have to use an adaptive curtain panel family
Any way to edit the profile of the wall when complete? or "attach top/base" I am getting an error when I try to make the wall profile work without a perfect rectangle?
Edit Profile on a wall should work unless the curtain wall spacing is messing things up. Attach Top/Base should work too. I would need to look at the file you made. Get with me tomorrow (Thursday)
I can attached to a roof with slope, always change the panel for a glass panel after attaching. Any help please
you will need to use an adaptive curtain panel for the panels that are not working. This is a bit harder to accomplish.
@@DzanTa Sir I think It;s possible without Adaptive Curtain Panel
@@biswarupmondal5778 send me your model so I can help you after lunch
Dzanta@gmail.com
@@DzanTa sir if you use the mullion profile like as the curtain panel profile then it's possible. also i am sending my sample file where you can see also a corrugated sheet Gable Roof. Thanks
Hi Dzan
Thank you for your video. I have tried to make a metal panel but I keep getting errors when I try and use it in my project. Is there a chance that you could look at it for me?
Thank you
Tony
Sure. I can help u in a few hours...
I've comeback to this 3 times and have gone thru it step by step. Every time i get to the part of loading in the metal wall panel it loads into new file but half the panel drawn is corrugated and the other half is just a smooth wall. Am i not locking something correctly making the metal wall family?
probably....I would need to see your file or see what you are doing.
4th try was successful! Turns out under properties for my modified curtain wall I changed the max spacing to be 4ft like the panel width was and that resolved it. Now to cut out openings is my next step. Thanks again! :) Dzan Ta
For some reason my panel is not extending up and down any suggestion ?
Make sure you magenta line sketches are aligned and locked to the reference planes
How do you add windows or doors
With this method you cannot add in normally. If you create it as an in place wall family, then you can insert doors and windows
Try offsetting the profile in autocad to get the correct gauge of the sheet. You can't draw a line that is 1/64" long in Revit.
How can I make this a roof sheet? TIA
Use the roof type that is called roof glazing.
ruclips.net/video/nG72bYJGKfQ/видео.htmlsi=Doo6U9TxMH8c3Ad7
Thank you so much!! I've been sitting at my pc for about 6 hours trying to figure it out...@@DzanTa
Hi I am keep getting error (There is no open view that shows any of the highlighted elements. searching through the closed views to find a good view could take a long time.)
I would start by closing the file first. Then opening it to 1 view. Then do whatever sequence of events you performed to see if you get the same error. Is the error occurring when you are in family making adjustments are when you are loading it into a Project file?
As stated below I followed this several times and keep getting an error message...can you help with this, I also emailed you can you help
Check email response
I looked at your family. Instead of creating a profile with a lot of s curves and making a panel that repeats....do this instead: Create a profile sketch of just 1 s curve as a Mullion Profile. Then load this into the Project. Use the Properties to swap out the mullion profile with your custom one. Then make sure the repeating distance is only the length of 1 s curve distance. I hope this helps.
is it can fill with door or window (automaticly cut wall0) sir ? tkyu
A Curtain Wall has a properly called Automatically Embed. If this feature is checked, the curtain wall will be hosted by the wall you draw it in. If you are talking about a door, you can load in a curtain panel door and then select a panel to switch it to the curtain wall door.
@@DzanTa tkyu sir, but my door is from metal rolling door because I use this coggurated for my factory design, when i created a hole from "opening wall" in revit is success 90% the rest is failed because the coggurated wall become a glass again. Can you have the solution sir? Tkyu
@@I_kiza_real If your door is a typical door that is hosted by a wall, you can switch your panel out to a wall. Then, insert your rolling door into that wall so it will be hosted by that wall within the panel within the curtain wall.
Can I use this as a roof?
Yes
hi, good video but i have a problem when i try to load the metal panel mafily to the generic model i get an error that there is no loops. what do you think about that!
Check your profile sketch and ensure it isn't too complex as well as a closed loop sketch. I can help you tomorrow between class breaks...
@@DzanTa I will be very grateful if you can help me in this. I tried everything but all in vain
@@ilyassfrikech1450 I can help you in about an hour...
Dzan Ta ok, thank you I ll be here waiting
@@ilyassfrikech1450 i am ready. What is your phone number
cant get it to work on REVIT 2020. can I get the family file?
What is your email address so I can send you the file?
@@DzanTa dead_666@live.com
@@kirkhood4041 ok. Will send asap
@@DzanTa thanks a lot. is it possible to edit the profile?
@@kirkhood4041 yes. Look for it in the list of families in the Project Browser
Can I download this anywhere?
I don't have the file anymore...sorry.
Does this only work in revit 2019 and later
I followed this step by step in 2017 and only get errrors when i try it
It should work in older versions too. What errors pop up?
Is there a way to just download it? Pleaaaaaase
I am in class all day. I will try to find my family file and send to your email address....what is your email address?
@@DzanTa h.saad@consultant.com
@@carepointglobal1356 can i get this file also. keep getting errors.
Hi Dzan, i keep getting error "cannot sweep" "no good view could be found"
I would check profile sketch and path again
Hi! Thanks you alot for this information. I have another question to do. It can change the color of the curtain wall? (sorry for bad english, not main lenguage)
The material of the panels and mullions can be changed in the Property window.
Please make a video about how to make Spanish tile roof with curtain wall or beam system method(I know Mass method but sow heavy)
I will do asap...probably next week sometime
@@DzanTa so thanks🌹
hi....I just uploaded a video for you based on your request...
ruclips.net/video/xv_zLud2fnQ/видео.html
please can you also help me with ridge cap ,how to make ridge cap
george alhassan
Send me a picture of what you are wanting
george alhassan
Do you mean an angled ridge vent family that goes oner the top of the ridge of a roof?...if so, i made one already and will send tomorrow morning
Thank you for this!
Klemen Potnik
You are welcome. Please let others know so they can benefit as well.
Very well done!
JonathanLight1
Thank you!
This is beautiful, thanks for the tutorial. But using this system it's not possible to cut holes/create different openings shapes on it for doors, windows and etc, therefore, it becomes pretty much useless.
Actually, if you create this panel as a custom vertical wall, you can host a door or window in it. You can also use the wall opening command or face based opening command to make holes. Since it's a wall, you should be able to Edit Profile too.
Can I get this panel? have a link to the RVT file?
I will give link tonight
sorry....I looked everywhere...I don't have the Revit family anymore. I have only the mp4 video I made to upload to RUclips. If I have time, I will make it again tomorrow or Thursday to upload to my Dropbox and send you a link then.
here you go....
www.dropbox.com/sh/w0ao8v5lezxswg0/AAA3iMcPdJ2Bj_ZFl1Gj5gXga?dl=0
here you go....
www.dropbox.com/sh/w0ao8v5lezxswg0/AAA3iMcPdJ2Bj_ZFl1Gj5gXga?dl=0
Doesn't want to work, it keeps saying "cant make type "metal sheet"" i don't know where i could be going wrong.
I can help you tomorrow morning
Dzan Ta Thanks alot! I can't wait.. 🙌
@@tobi_ffs HI....I am available now to help you....
Dzan Ta How can i send my files for you to check out?
@@tobi_ffs dzanta@gmail.com
I do not know what happens but following all the steps does not make the curtain wall like in the video.
do you need me to remote into your system to help you?
@@DzanTa if u want i can send u the file and maybe you can see what is wrong... I cant see it..
@@igorfodel9641 ok....dzanta@gmail.com
I will look at it in the morning and resolve
I tried this and I keep getting an error message, "Can't make type "Test Curtain Panel 1"."
You may need to redraw your profile sketch
@@DzanTa Thank you for the quick reply, I've tried redrawing my profile sketch and it didn't change the issue. I'm able to make the metal panel family, I can load it into my Revit project, but when I try to change the curtain panel to my new profile, that's when I get that error message.
@@victoriaunruh5761 the curtain panel in the project may be drawn such that it cannot accommodate the number of panels and spacing...try redrawing the host curtain panel as a simple straight wall, then a curved wall, then a wall with multiple curves of varying radii to test your custom panel.
it not work with me in revit 2017
how is this possible...or else i need revit 2019
it should work in 2017...this is just making a custom family. the principles apply to the family, not the version of the software. If you can send me a video of what you are doing, I can better understand where it isn't working for you.
please are good in revit structures
Good Day, I Have Repeated The Procedure For More That 3 Times, I Keep Getting Error.
I can help you in about 2 hrs. What error do you get?
Gracias!
De nada
kk thank you very sir,Gods grace i will waits tomorrow..
I tried your tutorial so that I can make a roof out of it but I can't make this work. I must be doing something wrong but I don't know what... great tutorial though.
Once you make the custom panel, create a roof using the sloped glazing roof and switch out your default panel to the custom one in Type Properties
Thank you, I did that and it worked ! But now it appears glazed while I put the parameter so it looks full. No matter what I do it only appears in a weird transluscent purple in the project... 🤨
@@grimmsdottir5993 Open up the custom curtain panel family you made. select the geometry. assign it a material in the Properties. Save and reload into project.
Dzan Ta Thank you, it worked just well 😊
I REALLY LIKE THIS VIDEO EXCEPT I GOT LOST WHEN YOU FINISHED THE FAMILY PANEL AND YOU DIDN'T SHOW US HOW TO APPLY IT ON A WALL OR ROOF
This video was meant to show you one way of making a panel. There is another video on my site showing how to use it for walls, roofs, etc....
Can't draw sweep on mine.
Ensure your sweep profile isn't too complicated
I want to use it for my roof...
@@aint_just_a_support5780 create the profile as a custom curtain panel, load I to project, create roof using slope glazing system family and swap curtain panel definition.
Hi Dzan Ta would you mind checking my Revit project that I have mailed to you? many thanks. experiencing some problems and I believe it's due to alignment and locking incorrectly.
Ok. Will do and let you know asap
ALso you can't add windows or doors.
Nathan Solarino...please email your comment to me....RUclips comment is cut off and I can't read it to help you.
dzanta@gmail.com
i mean gable roof ridge cap
The wall I created works well up to 5 feet wide. longer than that it stretches normal wall then it repeats the pattern after 10 feet. So what I have is 5 feet wide of the corrugated wall then about 10 feet flat, then 5 feet corrugated again. There is NO loop ? Her is how it looks : i67.tinypic.com/1znqsfb.jpg
Check your sketch to ensure the profile is aligned, dimensioned and locked properly. What is the realistic width size of the manufactured panel? Use the vertical spacing property to control this width. Theoretically we should be able to make a single giant panel using your custom profile swap such as in the Curtain Wall 1 type. Send me your profile sketch so I can play with it. Dzanta@gmail.com
Nope. Cant create sweep. Error cannot be ignored. Followed this video to the letter at least 10 times in Revit 2021.
I have time on Wednesday if you need help...kinda booked up until then
@@DzanTa That is very kind and generous. I'm tied up at work on Wednesday but I am genuinely grateful for your offer.
thank you very much sir
george alhassan
No problem. Let others know too
When you guys make these videos it would be helpful to load it and use it in a model as a demo and show how it interfaces with a sloped roof above and window openings. The problem with using curtain walls as the motif is that this family wont attach to the underside of an angled roof and it also doesn't like clipping for windows..doors yes but not windows.
Curtain walls can attach to the top of a roof. You might have to edit profile to make it work. Panels can be swapped for panel doors. Or, you can swap a panel for a wall and insert a door in that wall. I have another video that shows the application of it...just dig into my channel. You'll find it.