I watched this 9 minute video.... then was able to change my 2007 gmc w4500 levers in 10 minutes outside at night. Instantly followed 💯 your page will save me so much money from going to shops
Very Clear Instructions! Banging on the steering wheel worked like a charm. I ended unplugging all 4 plugs and unscrewing the white plastic plug in, to get the black plug undone... Just reversed the order and reconnected the white plastic plug in. Thanks for the video! It ended up taking less than an hour.
Came across your video. Great advice! Do you happen to know where I can find the turn signal relay on these trucks? I am having a problem where my emergency lights work but turn signals don’t flash or turn on 😅
Hi Thomas. I just purchased a 2005 w4500 (Box Truck). And I have 2 small issues with it. 1st. My right side rear turn signal (LED)doesn't work, but the tail light works. Tail light and turn light are 1. I replaced the led light with working ones and checked and cleaned the connector, and checked the fuses but still no turn signal. 2nd. I know the truck has 4 gears but when I drove it today over 80kmph it felt as if it was stuck on 3rd gear and was reving pretty high. Can you kindly give me some guidance on what i need to do? Much appreciated Thanks
Thank you for the video. A quick look on the internet I found the assembly for $67 including shipping. Bought on Amazon Swedish car parts. Maybe mine was just gold plated...
Can you tell me what the issue was to make you replace the switch? I have an 06 npr that all lights work except the high and low beams. Swapped relays. Fuses good. With headlights on, the turn signal/ daytime running light module behind the fuse box buzzes. Replaced that, still don’t work. I’m going for the switch next.
Hi I have a 2005 w3500 that has issue it's automatic trans is fine. Engine runs great at idle if will rev up first time. Then check engine light and won't go above idle the engine code says it high pressure fuel sensor. We replaced it or I think we replaced the right one. If you have any ideas plz let me know love this truck this Is very frustrating. Thankx. Mike
you are in limp mode. if you replaced the right one, you will still need to clear the code so the ecm knows it was taken care of. you can disconnect the battery for about 10 min. it should clear. thanks for watching
I watched this 9 minute video.... then was able to change my 2007 gmc w4500 levers in 10 minutes outside at night. Instantly followed 💯 your page will save me so much money from going to shops
An intelligent person with a sense of humor who makes the most complex truck repairs seem simple even to a stoned non mechanic !!!!!
Yep, sums up a good teacher.
Very Clear Instructions! Banging on the steering wheel worked like a charm. I ended unplugging all 4 plugs and unscrewing the white plastic plug in, to get the black plug undone... Just reversed the order and reconnected the white plastic plug in. Thanks for the video! It ended up taking less than an hour.
The video helped me a lot, I was able to change the part. Thank you so much.
Came across your video. Great advice! Do you happen to know where I can find the turn signal relay on these trucks? I am having a problem where my emergency lights work but turn signals don’t flash or turn on 😅
Hey Brian I have to change out the wiper switch on my truck do you have a video for that
Hey Brian, do you have a video on replacing the Brake Booster on the NPRs by any chance? Mine is a 2004.
Thanks for your video I was breaking my head like crazy 👍👍👍👍👍👍
I did replace the switcher thank you for that but my wipers still not working and I can't locate the wiper motor, please help
I have a 1988 and I’m trying to put a 1992 wiper assembly on mine it should fit shouldn’t it
Excellent video. About to attempt it. will follow up once our gold shows up!...... subscribed and liked!
Hi Thomas. I just purchased a 2005 w4500 (Box Truck). And I have 2 small issues with it.
1st. My right side rear turn signal (LED)doesn't work, but the tail light works. Tail light and turn light are 1. I replaced the led light with working ones and checked and cleaned the connector, and checked the fuses but still no turn signal.
2nd. I know the truck has 4 gears but when I drove it today over 80kmph it felt as if it was stuck on 3rd gear and was reving pretty high.
Can you kindly give me some guidance on what i need to do? Much appreciated
Thanks
Love these videos makes a job alot easier
Great video 👍 and working sitting on my but for the first time was great to
Thanks .. its the same for a 2007 NPR..
Thank you! Just save me a bunch of time
Thank you for the video. A quick look on the internet I found the assembly for $67 including shipping. Bought on Amazon Swedish car parts. Maybe mine was just gold plated...
ha, perfect. thanks for watching.
I just paid $29 for it on Amazon...works great.
Chris Montoya Can you send me the link you found it on Amazon or Part number
@@label1877 links please
Thank you for the video
Thank you !
Fantastic
Can you help me out on fixing the horn (it does not blow/work) on my 1994 NPR?
Thank you so much for this video!
You are the MAN!
Do you know where the relay for the hazards and turn signal are?
take out glovebox it is on side of radio
Great job
Can you tell me what the issue was to make you replace the switch? I have an 06 npr that all lights work except the high and low beams. Swapped relays. Fuses good. With headlights on, the turn signal/ daytime running light module behind the fuse box buzzes. Replaced that, still don’t work. I’m going for the switch next.
I'm having the same problem and i think is the switch. Good luck
Did the new switch fix either of you guys issue? I have the same issue on my 2001 npr.
Hi I have a 2005 w3500 that has issue it's automatic trans is fine. Engine runs great at idle if will rev up first time. Then check engine light and won't go above idle the engine code says it high pressure fuel sensor. We replaced it or I think we replaced the right one. If you have any ideas plz let me know love this truck this Is very frustrating. Thankx. Mike
you are in limp mode. if you replaced the right one, you will still need to clear the code so the ecm knows it was taken care of. you can disconnect the battery for about 10 min. it should clear. thanks for watching
Thank you! Appreciate it
Where is the video for the 35 cent fix for an erratic shifting 2001 npr transmission?
2000 isuzu npr no start, transmission shifting issues.
ruclips.net/video/vWkCIbMMH8g/видео.html
here is the link. thanks for watching.
Does anybody know the part number on Amazon I’ve been trying to look for it doesn’t seem to pop up on mine
You rock haha
Isuzu sells garbage these trucks are 1 problem after another parts are 3 times more expensive