It's not just the welding, that's a small part. It's your craftsmanship and vision of all the little details that make your videos great to watch. Thanks Allen for sharing!
Hallo Allen, ich mag deine Videos, deine Arbeiten aber vor allem wie du mit dem Schneidbrenner umgehst ..... ... hi Allen, i love youer Videos, also your Smokers and Firepits, but the best is how you work with the torchm it´s amazing man. Best wishes, gerd from a little town in germany ...
Hey there you make some really nice grills. I'm trying to make my first 55 gallon bbq cooker. But i would like yo know what is your measurements for the stands at angel iron
If you cut the lid in front bottom below the food rack so when u raise lid their is a space open to add- move-coals to adjust heat without having to slide rack out. So much easier - been doing for 40 years. Always bolt together everything to prevent rusting using long bolt spacers to keep fire heat away from table of treated wood bolted together with front table at bottom of barrel so to leave space under fire rack being part of lid open under rack to adjust -add coals. NO welding!!! 40 year old pits still around. I charge as much as 300$ just for labor + fabric. NO RUST !!!
Exhaust stack coming out lower on the barrel will help the rig to hold heat better. heat rises and travels straight to that pipe. lower that sucker to rack level, heat has to go across the meat before it escapes.
MattheusGO I agree, people want them at the top though most of the time. you're right tho, putting it in the middle does work better, I think I have some videos up where I did just that
Have you ever thought of placing the bottom air flow vents on the back of the grill especially when the client requests a table on the front of the grill or would that not work functionally? Love the videos man. God bless you and your family with prosperity and health.
mresmith4302 it would probably work the same, I just put them on the front because a lot of times people have their pits against a fence, porch, etc. and the back wouldn't be accessible.
good morning allen. you work very well. You are facilitating an amazing job. I have a workshop in Brazil in the state of Paraiba. I'm a mechanic here and make some barbecues. I will buy a mig weld. to improve services🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷
Bo Haggin thanks! welding and fab work, I'm actually just doing my own stuff right now for the past couple weeks but I'll be going back to a fab shop soon most likely
I can't remember where and what its called. The metal (flat bar)roll you use for the door seals. I wanna say its $13bucks you said. Don't quote me on that.
I like your work mainly because it seems like you enjoy doing it ! I have a 250 gallon propane tank I would like turned into a reverse flow smoker. Do you have a website or something that provides prices of your smokers or labor ?
It's not just the welding, that's a small part. It's your craftsmanship and vision of all the little details that make your videos great to watch. Thanks Allen for sharing!
Thanks for sharing, I love your work
You are simply amazing! Love your videos, man!
BeThou MyVisionRadio thanks!! I appreciate that!!
These grills are things of beauty!!!😍
You are an artist and amazing with an Oxy/Acetylene torch!
Very excellent job, you do great work!
Nice job Allen!! Great video!! You’re inspiring me to do some of these beastly cookers.
Good videos. Like most of us 'shade tree' builders, the projects are real and useable and your videos are easy to follow and use for your own
like always i really appreciate the builds gives me a lot of ideas
Getbto it, too much yapping
Awesome job!
You do nice work Al.
Excellent! I wish I knew enough people to need one of those!
Love it man you do great work
James Daugherty thanks!!
Very clean and professional job man!
Murad Ischanov thanks!
very nice build!!
you do great work
great job Allen...
amazing work love the oak stain!
I love your videos...
I would love to purchase these!
Nice work and skills
Your skills rock bro
Thats the most beautyfull grill i have ever seen omg
another great job
Kenny Mysak thanks!
Nice job.
That's super nice
So dang awesome Sir
Awesome 👍
I like your work man and like to see more , maybe a videos
good stuff man keep it up
Man you rock on making bbq
Good stuff
That's an awesome BBQ you built there 👍✌
You are GOOD 👍
Good job
Marwan Abu Tarieh thanks!
yo that Some bad ass pit
Hallo Allen, ich mag deine Videos, deine Arbeiten aber vor allem wie du mit dem Schneidbrenner umgehst ..... ... hi Allen, i love youer Videos, also your Smokers and Firepits, but the best is how you work with the torchm it´s amazing man.
Best wishes, gerd from a little town in germany ...
Good job, master. I would like to make one the same. Greetings from city Madero Tamaulipas Mexico
Allen, have you found a good 14" cut off wheel you could recommend? Seems the ones I use don't cut well, or glaze over too easily.
Hell yeah, very good device)) What kind of steel you used to grills? Stainless, high carbon or something else?
Great job... Do you mig weld or flux?
Allen, That things a beast man. You make it look easy as crap! Where are you located and how much do you charge to make me one like this one?
WOW that is beautiful!! if I could afford it how much to make me one I need that in my backyard now!
Tables add a nice touch
Kevin smith yea I think so too, I don't always stain them but it does look pretty good
love the video / how would that one cost
You make this look so easy I want to get me a welder
Love it how much some like tbis will cost?
Hey there you make some really nice grills. I'm trying to make my first 55 gallon bbq cooker. But i would like yo know what is your measurements for the stands at angel iron
gonna make one after I finish this 250 gallon pit on a trailer
If you cut the lid in front bottom below the food rack so when u raise lid their is a space open to add- move-coals to adjust heat without having to slide rack out. So much easier - been doing for 40 years. Always bolt together everything to prevent rusting using long bolt spacers to keep fire heat away from table of treated wood bolted together with front table at bottom of barrel so to leave space under fire rack being part of lid open under rack to adjust -add coals. NO welding!!! 40 year old pits still around. I charge as much as 300$ just for labor + fabric. NO RUST !!!
Exhaust stack coming out lower on the barrel will help the rig to hold heat better. heat rises and travels straight to that pipe. lower that sucker to rack level, heat has to go across the meat before it escapes.
Guess my theory would work with offset firebox.
MattheusGO I agree, people want them at the top though most of the time. you're right tho, putting it in the middle does work better, I think I have some videos up where I did just that
Good
Beautiful! Are you still making this type of grill? If so what would be the current cost WITHOUT the wood shelves?
Sir! Awesome! Is this grill still available and if so how much with an expanded metal shelf INSTEAD of the wooden one?
Молодец ! В дальнем углу заметил старую барбекю из одной бочки , эту наверное сделал для замены .
Have you ever thought of placing the bottom air flow vents on the back of the grill especially when the client requests a table on the front of the grill or would that not work functionally?
Love the videos man. God bless you and your family with prosperity and health.
mresmith4302 it would probably work the same, I just put them on the front because a lot of times people have their pits against a fence, porch, etc. and the back wouldn't be accessible.
Makes sense. I was just wondering. Great work man.
A newbie question, how do you decide what thickness, size you need for your fire pits for instance ??
good morning allen. you work very well. You are facilitating an amazing job. I have a workshop in Brazil in the state of Paraiba. I'm a mechanic here and make some barbecues. I will buy a mig weld. to improve services🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷
good shit. love your videos. mind if I ask what you do for a living?
Bo Haggin thanks! welding and fab work, I'm actually just doing my own stuff right now for the past couple weeks but I'll be going back to a fab shop soon most likely
Funny
Funny
Allen's welding/woodworking question bro is it possible to make a double barrel with a smoker, And be able to open and close the other half?
Are those epoxy-lined, food grade barrels?
Nice & clean 👍. How much ?
Mr Allen awesome work I'm trying to find you on Facebook and I'm not having any luck I saw a post with your fb but I will try the email next
Wanna make me one lol. I have the barrels love this idea. I just dont know how to wield
You must learn...
how much do you charge to make double barrel bbq pit like the one in this video?
Are the tie down scrap aluminum or steel
Stumbled onto your channel. Now excuse me while I binge watch. Where are you from? I'm about to call you cousin ✊🏾
Nice work! I was curious about the mig wire. You use .030” with gas?
Don’t remember on that one but yea, mostly .035 and .030
That is nice!! Great workmanship! How much for one??
Henry Aguero thanks! this one was $350
How far would you ship a double barrel pit too
I love this pit one day I'm going to buy one off of you
Justin Richie I would be glad to build it for you
How you make the vents to stay up and closed
How much would you charge for a smoker like this
I would love to show you a grill I made with ideas I got from your videos
What do you charge for that gril
*HOW MUCH FOR ONE OF THIS?* _THANKS!_
How much is the double barrel ?
I live in Michigan. can you ship a barrel grill to me if I ordered one?
Hey There do you still make these grills?
I can't remember where and what its called. The metal (flat bar)roll you use for the door seals. I wanna say its $13bucks you said. Don't quote me on that.
What are the dimensions of the grill grates
are you in Louisiana
What if I want to add a firebox to it. Instead the shelves on one end
Anthony Taylor then you pay the extra cost of having a fire box put on it
How much for one of these
Allen what's up
Motorized Grill out of a electric wheelchair
How much does one like this cost
This is my e-mail
I'm from st Maarten
how much would that cost/ exactly like this one
$800
can you add a smoke box to either end
What are the size dimensions of this grill?
2 barrels
I want u to build me a pit how do I get of hold of u
Felix Alvarez you can email me at allentubbs31@gmail.com or on Facebook "allenswelding"
How much for one
I think that screen below is too low ...
I like this particular double barrel pit. Please contact me, I would like to purchase this style pit.
Do you ship toTennesse?
Yea, price depends on distance, usually around $300 to Tennessee
how munch one them cost
Mike Richardson this one was $350
WTG...
Where are you located ?
Vivian, Louisiana
I like your work mainly because it seems like you enjoy doing it ! I have a 250 gallon propane tank I would like turned into a reverse flow smoker. Do you have a website or something that provides prices of your smokers or labor ?
How to I contact you for purchase?
I'll never burn a barrel again. It takes too much work to clean them. Sand blasting them is much easer and cleaner. But good work otherwise.
Uncle always show the video focus on video don't show your Face
Auto TU channel
Great job!