Do 2 of the HM20 heatmats fit in the DP 90 tent? And do the HM20 come with the power supply or do i need it separately? it dosent really say if power supply are included anywhere. Thank you
Hello, thank you for reaching out to us! The HM20 Heating Mat doesn't include a power supply, you'll need to get one separately. It's compatible with Cosmorrow 20W power supplies (reference COM20, this is indicated on the product page on our website). You can indeed fit two on the floor of the DP90. Cheers!
@@SecretJardinOfficial Thank you for fast answer! i need heating for my cacti seedlings this winther. Can the heating mat withstand an incubator with 35 pots on top? pots are only 7x7cm but a bit heavy becouse of pumice. Also i read on led grower eu, that The heat mat will automatically turn off when the temperature reaches 24°C, but it dosent say so on your web page? Best regards
@@zhaezz84 Hello again. There's no problem putting weight onto the flat part of the heat mat, but you should not compress the bulge near the power cable on the edge of the mat, as this holds the thermostat, make sure you position the mat so that this doesn't get squished. Regarding the heat mat shutting off automatically at 24°C, we did indeed remove the mention from our website. While heat mat will turn off automatically after it reaches a certain temperature threshold, in practice this is not always precisely at 24°C but can vary a little, so we chose to remove the mention, but the feature remains the same.
@@SecretJardinOfficial So i bought a few to test them out, i think it is an shame that the thermostat are placed so far in on the mat, but might be an teknical issue. There are some divider cables in the box also, what are these for (not mentioned in the instruktions)? The instruktions say not to place insulating materials on top, But wont an incubator with pots be considered insulating? Thank you :)
@@zhaezz84 Hello. No worries about pots of incubators. Insulating materials would be like mineral wool or styrofoam, or any other material that prevents heat conduction. This would cause the heat produced to accumulate in the mat instead of dissipating in the pots and soil as intended. The divider cables are provided in case the mats are used with the Secret Jardin Grow Stations GR60 and FS100, which have powerful enough power supplies to accomodate the heat mat's 20W requirement without having to get a separate power supply. In that case, the splitter is installed on one of the lower fans' power cable so one of the plugs can go to the heat mat.
Hi! While this product is primarily intended for growing plants, we've seen a few users purchase these to use as enclosures for resin printers, so this is definitely a thing! If you add an extractor and carbon filter, you can also better control odours during the printing process. Cheers!
i m interested with the DP60 but no video. At the end of this video the only size comparaison and interesting picture is hidden by the tutorial link boxes to click.
@@SecretJardinOfficial are the vents and holes fixed on the dp60 or could they be cut like the dp90? Also, its not very clear if we can access the inside of the tent by the top..
@@zik1981 Hi! You can freely place the openings in any corner on all Secret Jardin R4.00 tents, which include the Ducting Flanges, including the DP60. You can place the Ducting Flange on the tent's ceiling as well, no problem!
Hi ! Actually, the DP tent comes with the minimum flange and connector required. You can then buy extra items to make it exactly how you need. Do you need our assistance to get extra parts ?
@@SecretJardinOfficial why stop there? Sell me half the poles and make me buy the rest. I dont mind paying £80 or £100 for the full tent. I cant find a supplier in UK for a baffle or flange, and i NEED this for passive air intake. (dp60)
If they came with powder coated poles I'd get one of this size . But I've had a few secret Jardin models over the years and the poles get rusty .
Do 2 of the HM20 heatmats fit in the DP 90 tent? And do the HM20 come with the power supply or do i need it separately? it dosent really say if power supply are included anywhere. Thank you
Hello, thank you for reaching out to us! The HM20 Heating Mat doesn't include a power supply, you'll need to get one separately. It's compatible with Cosmorrow 20W power supplies (reference COM20, this is indicated on the product page on our website). You can indeed fit two on the floor of the DP90. Cheers!
@@SecretJardinOfficial Thank you for fast answer! i need heating for my cacti seedlings this winther. Can the heating mat withstand an incubator with 35 pots on top? pots are only 7x7cm but a bit heavy becouse of pumice. Also i read on led grower eu, that The heat mat will automatically turn off when the temperature reaches 24°C, but it dosent say so on your web page? Best regards
@@zhaezz84 Hello again. There's no problem putting weight onto the flat part of the heat mat, but you should not compress the bulge near the power cable on the edge of the mat, as this holds the thermostat, make sure you position the mat so that this doesn't get squished. Regarding the heat mat shutting off automatically at 24°C, we did indeed remove the mention from our website. While heat mat will turn off automatically after it reaches a certain temperature threshold, in practice this is not always precisely at 24°C but can vary a little, so we chose to remove the mention, but the feature remains the same.
@@SecretJardinOfficial So i bought a few to test them out, i think it is an shame that the thermostat are placed so far in on the mat, but might be an teknical issue. There are some divider cables in the box also, what are these for (not mentioned in the instruktions)? The instruktions say not to place insulating materials on top, But wont an incubator with pots be considered insulating? Thank you :)
@@zhaezz84 Hello. No worries about pots of incubators. Insulating materials would be like mineral wool or styrofoam, or any other material that prevents heat conduction. This would cause the heat produced to accumulate in the mat instead of dissipating in the pots and soil as intended. The divider cables are provided in case the mats are used with the Secret Jardin Grow Stations GR60 and FS100, which have powerful enough power supplies to accomodate the heat mat's 20W requirement without having to get a separate power supply. In that case, the splitter is installed on one of the lower fans' power cable so one of the plugs can go to the heat mat.
I think this'll be the perfect size to fit a saturn 4 ultra 3d printer
Hi! While this product is primarily intended for growing plants, we've seen a few users purchase these to use as enclosures for resin printers, so this is definitely a thing! If you add an extractor and carbon filter, you can also better control odours during the printing process. Cheers!
i m interested with the DP60 but no video. At the end of this video the only size comparaison and interesting picture is hidden by the tutorial link boxes to click.
So the second floor is missing? How am i supposed to use it as a shelf then? Just bought this shit! Really dissapointed
You dont get the grids wtf ? not buying it then
Hi! How to connect 100mm fan into this tent?
I've got a DP90 from 10 years ago and the material and zips seem stronger, this new one seems like it will last for maybe half the time with the zips.
It's not bad but seems more difficult to zip up with flaps on the front. I like the new vent system.
Hello Jam, thanks for you return. We use a new flap system for better light tightness. But the zippers are still of the same or better quality.
Mine came with only 1 Zip ! Why?
I want (not always need) one of everything you make...period. :))))
Well thats great bro because this thing only supplies 1 of something you need 2 of. Enjoy.
Who is she?
I'm here to watch this girl assembling grow tents!!!
SnP het wel dit vernieuwde systeem ivm de plaatsing, v, de gaten maar ik vind het maar niks. Hahaha.. Thx for het filmpje
What size is the 1st small tent @ 2:16
That's a DP60, it's 60x40x60cm. www.secretjardin.com/catalogue/propagation/dark-propagator/dark-propagator-60x40x60-cm/bl,product,302,0
@@SecretJardinOfficial are the vents and holes fixed on the dp60 or could they be cut like the dp90? Also, its not very clear if we can access the inside of the tent by the top..
@@zik1981 Hi! You can freely place the openings in any corner on all Secret Jardin R4.00 tents, which include the Ducting Flanges, including the DP60. You can place the Ducting Flange on the tent's ceiling as well, no problem!
Seriously, only one flange and light baffle? Really annoyed with this wtf is this a joke. Do i have to buy the zips and mylar seperately on the r5?
Hi ! Actually, the DP tent comes with the minimum flange and connector required. You can then buy extra items to make it exactly how you need.
Do you need our assistance to get extra parts ?
@@SecretJardinOfficial why stop there? Sell me half the poles and make me buy the rest. I dont mind paying £80 or £100 for the full tent. I cant find a supplier in UK for a baffle or flange, and i NEED this for passive air intake. (dp60)
@@whatsmynameagain7774 Can you sent a e-mail with the parts you need to info@secretjardin.com and we will take care about this. Cheers !
too big. i need a smaller box
Hello, we have a smaller box : 60x40x60. It's the smaller one we have. Cheers, Secret Jardin Team.