As an Aircraft mechanic back in the 90's I worked with a helicopter crew chief who was in Vietnam, he said in comparison they had very little trouble with the wooden rotor blades of the Bell 47
Nice share. FYI, the weight repartition in the leading edge is also very important to provide a correct balance. Just an airplane, a rotor blade needs to have the CG forward of the center of life about 25% of chord.
I love your video sir,id like to make one mosquito copter my own. i do not know wher to get ready to use swash plate and main rotor blade. Im just a little non-pro mechanic.. 😊 from 🇵🇭🇵🇭🇵🇭♥️♥️♥️
I wonder how the attachment of the composite blade is done to the hub, with composite lugs. The section of the blade shown here is filled with foam, but I believe that would not be strong enough at the attachment with the pins and bushings. I know there are some with thick solid laminate but I wonder of it's done.
Thankyou for your information. God has blessed America in this regard with kind honest people who freely share valuable information. Mind you, I think they got my idea while doodling on paper {with high-powered satillite / when DCsniper was active} regarding extra large mass at end of blades. My idea was to make the rotor shorter & determined centrifugal throw out force helped keep the blades level so as to lift copper instead of ends of blades lifting up, so idea was to have mass at ends. Basedon what youve shown i think steel leading edge for strength but bit of lead only at end to keep the weight down. Thankyou for your time and effort to bring us this information.
For gyrocopter blade chord is matter? For gyrobee having 210mm chord and 11ft long blade(per blade) but I have 178mm chord and 12.2ft long (per blade) is it ok to use ? Or chord and all to be match?
Thank you for your informative vedios. I want to make a drone by using a motorcycle engine and capable to left a person. If I use 150cc engine and two perpellers. How big should be the perpellers and how fast the rotation should be?
It's interesting that in the world of helicopters both radio control and full size rotor blades are either referred to as 'symmetrical' or 'asymmetrical' whereas a planes wing is 'cambered' or 'uncambered'.
Also provides specific pressure and if it gets low enough bim indicator will either go red or black signifying a potential issue and blade needs to be replaced.
As an Aircraft mechanic back in the 90's I worked with a helicopter crew chief who was in Vietnam, he said in comparison they had very little trouble with the wooden rotor blades of the Bell 47
Excellent video, very informative. It's not so easy to find this information. thanks for posting
This is the most informative video I have ever seen on blades. Thank you very much bro
Amazing information! I had no idea there were no many variations. I also love your flower shirt! You must be such a fun person to learn from.
You, sir, sound like a very wise person, and someone that should never be ignored
Thank you so much for your great video, it helped me a lot in understanding details about rotors
Thank you, I've often wondered about the construction of rotor blades, good video.
Thank you very much for sharing that with us.
I was thinking about making my own heli, but I had no idea what the blades were supposed to be made of, thanks!
Glad i could help but think it would be prudent of me to discourage you from building your own.
@@MrSkidkicker yeah I get it man
Nice share. FYI, the weight repartition in the leading edge is also very important to provide a correct balance. Just an airplane, a rotor blade needs to have the CG forward of the center of life about 25% of chord.
So we've got Agent Jay-Z covering gas turbine powerplants, & Mr. Skidkicker covering rotary wing theory. Noice.
I love your video sir,id like to make one mosquito copter my own. i do not know wher to get ready to use swash plate and main rotor blade. Im just a little non-pro mechanic.. 😊 from 🇵🇭🇵🇭🇵🇭♥️♥️♥️
Wow very interesting and informative I'm glad I came across your video. Thank you
Good job
Thank you a lot, awesome info.
I wonder how the attachment of the composite blade is done to the hub, with composite lugs. The section of the blade shown here is filled with foam, but I believe that would not be strong enough at the attachment with the pins and bushings. I know there are some with thick solid laminate but I wonder of it's done.
Thankyou for your information. God has blessed America in this regard with kind honest people who freely share valuable information. Mind you, I think they got my idea while doodling on paper {with high-powered satillite / when DCsniper was active} regarding extra large mass at end of blades. My idea was to make the rotor shorter & determined centrifugal throw out force helped keep the blades level so as to lift copper instead of ends of blades lifting up, so idea was to have mass at ends. Basedon what youve shown i think steel leading edge for strength but bit of lead only at end to keep the weight down. Thankyou for your time and effort to bring us this information.
From Odisha
Whats is actually the fuction of D-Spar? I'v been asked in exam
Sir how is a feather hinge is made. Can I make one just using a bearing? For my RC? Will it stand the centrifugal force?
For gyrocopter blade chord is matter? For gyrobee having 210mm chord and 11ft long blade(per blade) but I have 178mm chord and 12.2ft long (per blade) is it ok to use ? Or chord and all to be match?
Good share.. Getting better
(Indonesia)
How thick is the almunium mr??....from Indonesia tq
Sir Is that manerial available in Nepal? Because I need this types of rotor blades
Aluminium sheet size?
Hi, do you make the ser of main blades for Hughes 300 , A, B, C, ?
hi ,do you have helicopter main rotor or tail rotor blades ,how to making videos can you post
I am looking for a used pair of 24' skywheels rotor blades for an aircomand 447 gyrocopter. Can anyone point me in the right direction?
Thanks. Very interesting
Do you have free and old swashplate to study on it? Can you explain how it works
Thank you for your informative vedios.
I want to make a drone by using a motorcycle engine and capable to left a person.
If I use 150cc engine and two perpellers.
How big should be the perpellers and how fast the rotation should be?
Use one meter diameter and 10 RPM. It won't fly, but you won't hurt yourself too much.
Have for sell main rotor and main rotor blade?
also sikorsky aluminum spar and glued on pockets
Dommage que je comprenne pas tout, mais ça semble vraiment intéressant 👍
Thanks
It's interesting that in the world of helicopters both radio control and full size rotor blades are either referred to as 'symmetrical' or 'asymmetrical' whereas a planes wing is 'cambered' or 'uncambered'.
'Symmetric' is also commonly used to describe non-cambered fixed-wing airfoils.
Neat Explanation Thx
👏👏👏
පට්ට එකෙන්ම .
Great 👍
Sir make a video about weight balance in a simple way
I think I will save that for Shannon in AMT 704
АССАЛАМ-АЛЕЙКУМ, ИЗ УЗБЕКИСТАНА, МОЖЕТЕ НОМЕР ТЕЛЕФОНА ОСТАВИТЬ ЗАРАНЕЕ СПАСИБО
Indonesia🙏🤝👍
😍😍😍😍😍🌹🌹🌹🌹👏👏👏👏👏👏👏👏
my dad made me do this
Почти форума напор
Ok boss
Some helicopter blades have Nitrogen Gas inside to keep the moisture out.
Also provides specific pressure and if it gets low enough bim indicator will either go red or black signifying a potential issue and blade needs to be replaced.
ترجم الى العربيه