I hope you enjoyed learning more about chisels and mortise joinery. I release regular videos so please subscribe to my channel: ruclips.net/user/paulsellerswoodwork
Hi Paul ive not done wood work since my school days i'm just starting in wood work at the age of 66 due to a gift of a plane that my father left me when he past away at 94 so I watching how to sharpen and repair a stanley bench plane and I watched your video and it set me off thank you paul ive watched most of your video's now and i'm doing wood chisels and joints so thanks paul from Charles graham
Hi Paul. Superb video as always. There is another guy that says that you want to use a mortise chisel specifically because of the thick parallel sides is used to stabilize the chisel otherwise a normal chisel would want to walk or twist a certain direction with the blows of the mallet. Thoughts? Thanks Paul. Love your teaching.
That ending line is one reason I really admire Paul, "See how it works for you" He never tells you that there is only one way of doing things, he simply offers up his perspective and if it helps then that's great.
All the chisels try to twist, especially in softwoods, where the growth rings are so diverse and strong aspects of the two-part ring offers minimal resistance. It is really a question of feeling for and correcting any deviation at the moment and twisting carefully back to course and holding the position diligently every time.
I just cut my first mortise, a 3/4" wide mortise using a 1/4" wide chisel. Came out okay, but took 1 hour 45 minutes. Watching this showed me that both my technique was awful and having an appropriate chisel width is crucial. Amazing demonstration. Also, Paul seems like a gentleman who would never stab his teacher in the back and steal credit the way Bob Ross did to William Alexander.
Paul - not only are you a consummate craftsman but your are one hell of teacher - a very rare combination. PLUS you are inspirational- I am 65, retired and haven't done any woodwork since I was 14 but I sure want to try and learn. Thank you so much!
@@ildefonsogiron4034 I tried - it didn't work though. No matter how many times I attempted to make a simple joint, I still ended up with tear outs and a loose fit. After about a year or so, I gave up. 😞
@@SolveEtCoagula93 The good news is you are still around and maybe you've found another motivations or hobbies. I am really really glad you answered me. Like yourself, I also tried my hand at making a couple mortises and I partially succeeded but, instead of half an hour, it took me a whole day. Best regards.
Paul, you are my hero. I am a 66-year-old female, and just starting to put my workshop together. I have been a machinist for 14 yrs, but never really worked with wood. This is my retirement dream to keep my busy and young. I love the way you teach and explain everything. I just know that I have a future in woodworking with your videos to aid me.
@@stepheneyles2198 I live in a rented semi detached council house over in the UK, and let me tell ya it's definitely possible to do hobbyist level woodwork, I'm even planning on building a workbench tomorrow. I'm lucky enough to have a modest garden, so I do all my work out there in the day (so there isn't any noise complaints). I've practiced making mortise and tenon joints on cheap Pine without a bench, admittedly I had to get creative when holding/clamping the workpiece down, so having a bench will make that easier. Don't be afraid of softwoods, Pine holds up pretty well for joinery. Just make sure your chisel is sharp! Anyway, just wanted to say that it is possible and good luck!
@@stepheneyles2198 You can and should start now already - otherwise you might lose your interest. And you might rocognize that more years of woodworking are more better ;) With silent and almost dust-free handtools you can also start on a balcony, in the backyard, in front of your door or even in the kitchen. It is not as comfortable as working in a shop but it might even be more fun plus you get fresh air ;)
I watched this at 2x speed to get a better idea of the method and how it progresses. It helped see each cut/stroke and how they flow from start to finish. It's also fun to listen to Paul's voice as he sounds young and energetic hehe
Mr Sellers, thank you for posting all of these videos. I have learned so much from you. I once tried cutting mortises years ago and it was a complete failure. After watching this video a couple times, I tried again and it was a success. I've cut four in the past couple days, and the tenons all fit nice and snug. Thanks again. You're the best!
Mr. Paul Sellers, I'm not sure if you actually read these comments, but if so, I would like to personally thank you for giving your time to put out these videos showing your AMAZING woodworking skills with HAND tools. You have a way of explaining the things you're doing and just your calm, laid back, personality makes it a PLEASURE to sit and watch. You sir, are someone I would LOVE to meet learn from. This is something I'm just VERY recently trying out and of ALL the other videos I've come across on RUclips, you are and ALWAYS will be my go to. Cheers from a little town in South Louisiana WAAYYY in the southern USofA
Thank you, Paul Sellers, for the excellent training videos. As a retired person on a limited income, I truly appreciate these videos as they allow me to learn how master woodworkers are able to achieve such incredibly good results without expensive power tools.
This video was exactly what I needed! I was seriously struggling with mortises and after watching this video once I went our to the garage and cut a perfect mortise. You Sir, are a saint!
Mr. Sellers, I would be willing to bet that when you said you had taught 3500 people how to do this, that that number has substantially increased by the hundreds of thousands thanks to your worthwhile, instructive, and easy to follow straight forward videos. Thank you for sharing this time honored craft. I picked up a single chisel a few months ago and never looked back. I now have several beautiful and functional antique tools that I found at pawn shops and flea markets, and the joinery you have taught have been admired by many. Thank you for your time and effort, as well as your dedication. This is something that will become part of my legacy, just as it is yours. Thanks again.
See I'm not english and only recently began my carpentry apprenticeship but I bet my life that when he sais teaching the use of a chivel it means that he stood over these boy and gals and watched their every move. That's the reason he didn't include viewership numbers, the man is not dumb he just has some very strict principles.
@ 8:53 is my favorite part. The bevel just rides against the wall all the way down. Paul, I am so grateful that you post these videos. I've purchased your dvd's as soon as I found out about you and have been woodworking with hand-tools for only about 3 months. I'm in the process of building your bench. It has been great and your experience has definitely helped me seem more experienced. Hopefully one day, I can make it out to Northern Wales and work alongside of your instruction in a class setting.
I’m a novice at best. While I “know” how how furniture is built, I lack the techniques to do it well. This video has been a tremendous help for me. I have a power router I can use to cut mortises quickly, I don’t have dust collection and it makes a huge mess. I use a bevel chisel and find using this technique for cutting mortises slower and more enjoyable than zipping them out with my 2 1/2 hp router. Thanks for posting this video!
I appreciate the time you taken to make all of these videos. It's nice to see someone honor the hands on approach to woodworking. Keep making these videos. Thank you!
I know viewers often comment that Paul makes his techniques look so easy. Well I can tell you if you follow Paul's guidelines and techniques it IS easy. My first few mortises using this method were adequate, not great. However they improved quickly and now I don't even know how to cut mortises differently. This is a great instruction.
From a 10 minute video to a life long skill. I was fitting some doors at my brothers house and while doing the mortises for the strike plates with this technique I suddenly remembered this video where I learned it years ago. Thank you for that!
Y'all I've watched so many of Paul's videos lately! For about a year and a half I've been totally consumed by my table saw restoration project, but now that I'm nearing the finish line I will soon be able to start actually woodworking. Yes, the table saw is a machine, but I'm also interested in hand tools, so here I am watching a 10 year old video that's just as relevant and absolutely golden. i❤it!
The Bob Ross of woodwork. It is so satisfying to watch your work, how patient you are. You teach us all to be as patient and steady. You are a treasure.
The visualization here is great - I'll go try this today while it's fresh in my mind. Paul is a great teacher because of his clear descriptions, but also because he really knows his craft. Some of the "how-to" channels don't by some fresh youngster can be a lot of fun, and I enjoy them, but it's not the same as learning from someone who's practiced his craft for years on different pieces, different materials, different tools. This has quickly become my #1 learning channel. thanks very much, Paul.
Paul Sellers, The Great and Powerful Oz, of woodworking. "We're not worthy". you rock for offering so much masterful information to us mere learners and apprentices, for free, in a medium where we can go back and review as often as we want. Gof bless you sir. I see why so many channels refer to you.
begginer here. I just did my firsts mortises thanks to you. It was across the grain though, first one ended too wide. I took a narrower chisel for the others and it ended ok. 40mn for the first one (with pauses to re-check the vidéo). It took 20minutes for the others. Thanks again for your instructions.
I have never considered woodworking as a source of fun and entertainment until i saw steve ramsy videos, when i viewed paul sellers' i sort of dropped the machines and picked up planes and chisels and the sharpening station. Thx paul
I refer to your videos over anyone else’s. I consider you to be the benchmark for all hand tool woodworking. There has never been a video of yours that I haven’t learned multiple things. This even though I have woodworked for over 20 years.
The chopping with the bevel edge chisel is still the best that I have seen. Done with the least amount of chop possible. The key is turning the chisel around when going back to the starting line and using the bevel of the chisel to pry out the waste. I've watched about a dozen mortise chopping videos and no one does it like Paul.
Mr . Sellers , as soon as I watched this video I went straight away to my wood shop and grabbed the first piece of scrap wood I could find . Within minutes I realized all of the other techniques I'd used beforehand were colossal wastes of time . You have my sincere gratitude . God bless you .
A fantastic example of why i do certain things the old school way....coming from a machinist background I was all about machines, but after watching carpenters like Paul I realized that actually the old way is often so much faster....he had that mortise chopped b4 I could even set up a router Paul Sellers sir you are living legend thanks for your videos
Thanks Paul! I watched this video when I first started woodworking last January. It helped me a great deal but after rewatching it I realized I've been doing it wrong! It's always great to learn from you. I appreciate the lessons!
Before I reach the end I turn the chisel around so that the flat face of the chisel approaches the vertical with about 4-5 angled cuts with each one moving toward the perpendicular and the last cut is perpendicular with the large flat face if the chisel creating the perfect wall.
Paul After watching ur video . You gave me hope with the right technique how to use a chisel and at the same time a better understanding why is so important to sharp the chisel with the right technique too. I have respect for ur wisdom in carpentry.
Hello Paul, I was referenced here by a student for his own guidance and understanding... Over all, I think your demonstration of chopping a mortise with two different types of chisels is a wonderful educational tool..most excellent! You validate just enough to establish specific expertise, and offer this method as your view compared to other's modalities. If I may respectfully offer...this is a traditional method... and the way I was taught by Old Order Amish and since those days long past, have seen mortise chopping done in very similar fashion countless times with a number of chisel types in several different wood cultures. You are in excellent company by that standard. In general (and from my observations)...mortise chopping...is an individual skill set of the Master, their material and work style with the tool type or style dictating a given approach. My only actual critique (if I may offer one) is that the mallet/hammer selection for the heavy mortise chisel was not well matched or in balance to its form and style of use typically. For that heavy style of mortise chisel employed first, a much more robust hammer/sledge is what would traditionally be used, and with much heavier blows. Grant you I am a Timberwright, and use a 3lb (and sometimes 4lb) Metal Mallet/Sledge used by carvers. This speaks to style and traditional approach. Again, much thanks for your video, and what you do for the craft!
The best MnT video I have ever seen! You make it look so simple! I'm going to start building my double-doors tomorrow with some rather crappy pine. I have 20 MnT joints to do so I will add this video to my bookmarks!! :D
As always, excellent video and narration! Mr Sellers, you are a master craftsman, and a superb teacher to many of us. Thank you for sharing this upload!
Without ever seeking instruction on mortise cutting this is exactly how I attempted and achieved cutting my first mortise and find this style very controlling and comfortable. Thanks Paul
This changed my life when I was building my post and rail fencing with interlocking wedged tenons last year. Saved me so much time. I had bought an auger bit to help drill out the mortises and then discovered your bevel down technique was quicker and easier. Thank you!
The good set of bevel edge chisels are really all you need. Really depends on what you make. The only time i've seen paul use anything but a bench chisel is on thin long mortises.
Thank you, Paul - both methods are very spectacular; as a newbie I start the second method first. The ending performance indicators offer excellent motivation to my work: highly appreciated! Kind regards from Hungary
Excellent demonstration. It's amazing to see that the bevel edge chisel leaves a smoother finish, reaches the corners better and does the job faster. Thanks a lot Paul for sharing this very insightful VDO. Cheers, Kem
I am brand new to wood-working and I would like to thank you for taking the time to produce this video. I have been trying to teach myself to cut mortice and tenons from a book. I have particularly struggled to cut a neat mortice. Since following the method you describe I have cut my best mortice so far in a fraction of the time. Improving is so rewarding. I find your resources inspiring and have found a real passion to improve my skills and keep learning. Thank you. I am very grateful.
I use bevel edged bench chisels all the time . I have a nice set of mortice chisels but they are only use on BIG ,and I mean BIG,joinery . Excellent teaching video .he does not force his ideas on you ,he always leaves it up to you.
another great video Paul & expertly done i've been a carpenter for 15 years every time i watch one of your videos it helps take my carpentry & joinery to the next level.
I am so new to working with hand tools I didn't even know that there was a different type of chisel for mortise work. thanks for the lesson. very informative and interesting to know about all the old tools out there.
Thanks for all the advice. Means alot to people who have to learn everything on their own. Been dabling in woodworking for 2 years now. I've built a few boxes and stands all with my hands and feet. No power tools no bench.
Holy cow! Great tutorial. Never ever would have attempted one without using the drill press, but after seeing that, I may find the courage yet. Many thanks for sharing your talents.
Tape can be fixed to the chisel blade as a rough depth gauge, or a combination square with the rule set to your working depth. The downside to using tape is it tends to wear away or wrinkle up and needs re-setting fairly often, so instead I'd recommend marking the blade using a marker pen.
Paul, thanks for the excellent video. I now understand much better what you were demonstrating in your other videos on mortises and tenons. The glass wall idea was a terrific visual aid . . . and used very effectively by a great instructor.
I watch this if I havd gone a month without cutting a mortis. Just a nice refresh. I enjoy flitting between the mortis chisel and a cabinet makers chisel, just because I enjoy chisels.
You have a new subscriber in me sir! Thank you for sharing this and showing us newbies (and vets) that you don't have to buy super-expensive tools to do woodworking. It's disheartening for me starting out to read in the forums most people saying "just bite the bullet and buy Lie-Nielsen" quality chisels and planes. Starting out, I don't want to shell out $150 for three chisels when a basic chisel set will do. I look forward to consuming your other content and learning these skills because I want to have hard skills I can pass onto next generations. Thanks Paul for your passion and wisdom!
I sure wish I had found your videos when I started serious woodworking 11 years ago. I would have save many hours of trial and error on dovetails and mortises. I'm certain I have much more to learn here. Thanks so much.
This was really helpful. I am working in building my first table for a friend. It’ll be an 8 person farmhouse style, and I wanted to make a couple of through tenons with wedge locks in the skirt to help support the top and make it a little more sturdy. I was afraid I’d have to go buy more chisels, and that’s not really an option for me right now being off work. Being able to work with what I’ve got is great. Much appreciated!
Great video, as usual Paul. "Make your own mind up".........I wish I had the diplomacy that you have. Great technique, simply demonstrated. Oh if it were all quite so simple.
This is great. I'm very surprised how much easier the regular bevelled chisel did the job much quicker, with consideration of much lighter structure and weight. And yes, the finish definitely looks much better with the second one. Thanks for sharing this technique.
absolutely love this vid. i am a beginner myself and just the fact that i don't need to buy an extra tool on it's own is great. plus the technique works just fine for me
Excellent explanation and teaching method! I’ve been watching your videos and learnt a ton from you! Thank you for sharing your experience and knowledge Paul!
Very impressive. Last night was watching a Japanese craftsman demonstrating the same project and it took him twice as long and was no cleaner, neater. I am not familiar with the mortise chisel you were using since I have always used a set of handmade Japanese chisels that were passed on to me by my former wife's, mother of my children, uncle. Though you stated that it did not cut as cleanly I was intrigued by your use of the tool. This was my first watch but it's enough to get me subscribed. Thank you.
Paul, thanks for posting this. I’ve never been able to get these to work very well until I watched this video and immediately realized it was my technique. You showing how you work the bevel edge perpendicular to the base is the key to it... seriously that make a light bulb go off for me and it solved all my chiseling problems :) I was actually going to buy mortising chisels assuming I couldn’t do it right because I was using the wrong chisels when it was really just me doing it wrong so you’re saving me a lot of money! Also, I like the way you pronounce lever. Leeeever. :)
Brilliant method. just tried it and it worked well and fast. Before I've tried the "Drill it out and tidy up" method and the Wood Occupations method from the middle out. I cut with a 13mm chisel and left walls 3mm thick each side no problem in about 5 minutes.
Paul, thank you for the videos. I'm not a wood worker myself but I very much enjoy watching woodworking videos. If I may make a criticism, I don't think the amount of time taken to cut mortises is very relevant. Every mortise is cut as fast or as slow as the woodworker cuts it! I think the highlight of this video should be the efficiency and, quite frankly, accuracy of the bevel edge chisel as opposed to the mortise chisel. All in all, great video. Very informative.
Started a new project today… A Morris chair, and I needed a good way to make all the mortises necessary and I have started to use this method and by my 3rd one its amazing how good my mortises are coming out using this method with a bevel chisel. Really amazing video and great tutorial.
I had a chance to try Paul's technique on a roubo workbench Im building. The posts are 5x5 jarrah and Ive cut a set of through and stop mortises cutting out the waste with a forstner bit mounted on a drill press and manually squaring the corners. As Im still a WW neophyte, the mortises are quite rough and loose but using a Japanese bench chisel and Paul's approach has made an immediate and huge improvement in the mortise Ive just cleaned up. Thanks, Paul! Thanks, LizardWizard08!
I hope you enjoyed learning more about chisels and mortise joinery. I release regular videos so please subscribe to my channel: ruclips.net/user/paulsellerswoodwork
Hi Paul ive not done wood work since my school days i'm just starting in wood work at the age of 66 due to a gift of a plane that my father left me when he past away at 94 so I watching how to sharpen and repair a stanley bench plane and I watched your video and it set me off thank you paul ive watched most of your video's now and i'm doing wood chisels and joints so thanks paul from Charles graham
That was a great demonstration, thank you. The beveled chisel looks like the way to go to chop out mortises.
Hi Paul. Superb video as always. There is another guy that says that you want to use a mortise chisel specifically because of the thick parallel sides is used to stabilize the chisel otherwise a normal chisel would want to walk or twist a certain direction with the blows of the mallet. Thoughts? Thanks Paul. Love your teaching.
Love your videos Paul but can I ask why don’t you pre drill, them cut out!
I fit mortise locks in doors and pre drill then chisel out, is it more controlled when it’s in a vice?
That ending line is one reason I really admire Paul, "See how it works for you" He never tells you that there is only one way of doing things, he simply offers up his perspective and if it helps then that's great.
All the chisels try to twist, especially in softwoods, where the growth rings are so diverse and strong aspects of the two-part ring offers minimal resistance. It is really a question of feeling for and correcting any deviation at the moment and twisting carefully back to course and holding the position diligently every time.
3 min on that second mortise, it takes me longer than that just to get off my ass and plug in my router.
You sir are the Bob Ross of woodworking
idk if that’s a complement lol
I just cut my first mortise, a 3/4" wide mortise using a 1/4" wide chisel. Came out okay, but took 1 hour 45 minutes. Watching this showed me that both my technique was awful and having an appropriate chisel width is crucial. Amazing demonstration.
Also, Paul seems like a gentleman who would never stab his teacher in the back and steal credit the way Bob Ross did to William Alexander.
Paul - not only are you a consummate craftsman but your are one hell of teacher - a very rare combination. PLUS you are inspirational- I am 65, retired and haven't done any woodwork since I was 14 but I sure want to try and learn. Thank you so much!
Empty Head do it man, don't wait another min.
2023. You may be 71 by now. Tell us about your experiences. Hope you are well.
@@ildefonsogiron4034 I tried - it didn't work though. No matter how many times I attempted to make a simple joint, I still ended up with tear outs and a loose fit. After about a year or so, I gave up. 😞
@@SolveEtCoagula93 The good news is you are still around and maybe you've found another motivations or hobbies. I am really really glad you answered me. Like yourself, I also tried my hand at making a couple mortises and I partially succeeded but, instead of half an hour, it took me a whole day. Best regards.
after watching more than 10 videos on the subject, that view trough the glass really helped me out. you are simply a awesome teacher
Paul, you are my hero. I am a 66-year-old female, and just starting to put my workshop together. I have been a machinist for 14 yrs, but never really worked with wood. This is my retirement dream to keep my busy and young. I love the way you teach and explain everything. I just know that I have a future in woodworking with your videos to aid me.
There's hope for me yet then. I want to have a workshop but in rented accommodation. Have to wait a few more years I guess... :-)
@@stepheneyles2198 I live in a rented semi detached council house over in the UK, and let me tell ya it's definitely possible to do hobbyist level woodwork, I'm even planning on building a workbench tomorrow.
I'm lucky enough to have a modest garden, so I do all my work out there in the day (so there isn't any noise complaints).
I've practiced making mortise and tenon joints on cheap Pine without a bench, admittedly I had to get creative when holding/clamping the workpiece down, so having a bench will make that easier.
Don't be afraid of softwoods, Pine holds up pretty well for joinery.
Just make sure your chisel is sharp! Anyway, just wanted to say that it is possible and good luck!
As they say: "You go, girl!"
@@stepheneyles2198 You can and should start now already - otherwise you might lose your interest. And you might rocognize that more years of woodworking are more better ;) With silent and almost dust-free handtools you can also start on a balcony, in the backyard, in front of your door or even in the kitchen. It is not as comfortable as working in a shop but it might even be more fun plus you get fresh air ;)
I watched this at 2x speed to get a better idea of the method and how it progresses. It helped see each cut/stroke and how they flow from start to finish. It's also fun to listen to Paul's voice as he sounds young and energetic hehe
Thank you for your videos. You are an excellent teacher.
Mr Sellers, thank you for posting all of these videos. I have learned so much from you. I once tried cutting mortises years ago and it was a complete failure. After watching this video a couple times, I tried again and it was a success. I've cut four in the past couple days, and the tenons all fit nice and snug. Thanks again. You're the best!
Mr. Paul Sellers, I'm not sure if you actually read these comments, but if so, I would like to personally thank you for giving your time to put out these videos showing your AMAZING woodworking skills with HAND tools. You have a way of explaining the things you're doing and just your calm, laid back, personality makes it a PLEASURE to sit and watch. You sir, are someone I would LOVE to meet learn from. This is something I'm just VERY recently trying out and of ALL the other videos I've come across on RUclips, you are and ALWAYS will be my go to. Cheers from a little town in South Louisiana WAAYYY in the southern USofA
Thank you, Paul Sellers, for the excellent training videos. As a retired person on a limited income, I truly appreciate these videos as they allow me to learn how master woodworkers are able to achieve such incredibly good results without expensive power tools.
This video was exactly what I needed! I was seriously struggling with mortises and after watching this video once I went our to the garage and cut a perfect mortise. You Sir, are a saint!
Mr. Sellers, I would be willing to bet that when you said you had taught 3500 people how to do this, that that number has substantially increased by the hundreds of thousands thanks to your worthwhile, instructive, and easy to follow straight forward videos. Thank you for sharing this time honored craft. I picked up a single chisel a few months ago and never looked back. I now have several beautiful and functional antique tools that I found at pawn shops and flea markets, and the joinery you have taught have been admired by many. Thank you for your time and effort, as well as your dedication. This is something that will become part of my legacy, just as it is yours. Thanks again.
See I'm not english and only recently began my carpentry apprenticeship but I bet my life that when he sais teaching the use of a chivel it means that he stood over these boy and gals and watched their every move. That's the reason he didn't include viewership numbers, the man is not dumb he just has some very strict principles.
At first i did not want to subscribe, but after watching this video. I've got deep respect for your 50 years of experience. It just shows.
@ 8:53 is my favorite part. The bevel just rides against the wall all the way down. Paul, I am so grateful that you post these videos. I've purchased your dvd's as soon as I found out about you and have been woodworking with hand-tools for only about 3 months. I'm in the process of building your bench. It has been great and your experience has definitely helped me seem more experienced. Hopefully one day, I can make it out to Northern Wales and work alongside of your instruction in a class setting.
I’m a novice at best. While I “know” how how furniture is built, I lack the techniques to do it well. This video has been a tremendous help for me. I have a power router I can use to cut mortises quickly, I don’t have dust collection and it makes a huge mess. I use a bevel chisel and find using this technique for cutting mortises slower and more enjoyable than zipping them out with my 2 1/2 hp router.
Thanks for posting this video!
I appreciate the time you taken to make all of these videos. It's nice to see someone honor the hands on approach to woodworking. Keep making these videos. Thank you!
It's this kind of how to videos that makes me love youtube so much. Nice job and thanks! You have my subscription.
Paul, you are like Michelangelo using the chisel. Please never stop with this videos, I'm learning from you. Congratulations!!!
I know viewers often comment that Paul makes his techniques look so easy. Well I can tell you if you follow Paul's guidelines and techniques it IS easy. My first few mortises using this method were adequate, not great. However they improved quickly and now I don't even know how to cut mortises differently. This is a great instruction.
From a 10 minute video to a life long skill. I was fitting some doors at my brothers house and while doing the mortises for the strike plates with this technique I suddenly remembered this video where I learned it years ago. Thank you for that!
Y'all I've watched so many of Paul's videos lately! For about a year and a half I've been totally consumed by my table saw restoration project, but now that I'm nearing the finish line I will soon be able to start actually woodworking. Yes, the table saw is a machine, but I'm also interested in hand tools, so here I am watching a 10 year old video that's just as relevant and absolutely golden. i❤it!
The Bob Ross of woodwork. It is so satisfying to watch your work, how patient you are. You teach us all to be as patient and steady. You are a treasure.
The visualization here is great - I'll go try this today while it's fresh in my mind. Paul is a great teacher because of his clear descriptions, but also because he really knows his craft. Some of the "how-to" channels don't by some fresh youngster can be a lot of fun, and I enjoy them, but it's not the same as learning from someone who's practiced his craft for years on different pieces, different materials, different tools. This has quickly become my #1 learning channel. thanks very much, Paul.
Wow. I clicked on this video not realizing that it offered a solution to a problem I never knew I had. Awesome!
That was an amazing demonstration with the glass. Thank you!
Paul Sellers, The Great and Powerful Oz, of woodworking. "We're not worthy". you rock for offering so much masterful information to us mere learners and apprentices, for free, in a medium where we can go back and review as often as we want. Gof bless you sir. I see why so many channels refer to you.
begginer here. I just did my firsts mortises thanks to you. It was across the grain though, first one ended too wide. I took a narrower chisel for the others and it ended ok. 40mn for the first one (with pauses to re-check the vidéo). It took 20minutes for the others. Thanks again for your instructions.
I have never considered woodworking as a source of fun and entertainment until i saw steve ramsy videos, when i viewed paul sellers' i sort of dropped the machines and picked up planes and chisels and the sharpening station. Thx paul
I refer to your videos over anyone else’s. I consider you to be the benchmark for all hand tool woodworking. There has never been a video of yours that I haven’t learned multiple things. This even though I have woodworked for over 20 years.
Such a treat watching you work!
The chopping with the bevel edge chisel is still the best that I have seen. Done with the least amount of chop possible. The key is turning the chisel around when going back to the starting line and using the bevel of the chisel to pry out the waste. I've watched about a dozen mortise chopping videos and no one does it like Paul.
Mr . Sellers , as soon as I watched this video I went straight away to my wood shop and grabbed the first piece of scrap wood I could find . Within minutes I realized all of the other techniques I'd used beforehand were colossal wastes of time . You have my sincere gratitude . God bless you .
A fantastic example of why i do certain things the old school way....coming from a machinist background I was all about machines, but after watching carpenters like Paul I realized that actually the old way is often so much faster....he had that mortise chopped b4 I could even set up a router
Paul Sellers sir you are living legend thanks for your videos
Thanks Paul! I watched this video when I first started woodworking last January. It helped me a great deal but after rewatching it I realized I've been doing it wrong! It's always great to learn from you. I appreciate the lessons!
Before I reach the end I turn the chisel around so that the flat face of the chisel approaches the vertical with about 4-5 angled cuts with each one moving toward the perpendicular and the last cut is perpendicular with the large flat face if the chisel creating the perfect wall.
Paul
After watching ur video . You gave me hope with the right technique how to use a chisel and at the same time a better understanding why is so important to sharp the chisel with the right technique too. I have respect for ur wisdom in carpentry.
Hello Paul,
I was referenced here by a student for his own guidance and understanding...
Over all, I think your demonstration of chopping a mortise with two different types of chisels is a wonderful educational tool..most excellent!
You validate just enough to establish specific expertise, and offer this method as your view compared to other's modalities.
If I may respectfully offer...this is a traditional method... and the way I was taught by Old Order Amish and since those days long past, have seen mortise chopping done in very similar fashion countless times with a number of chisel types in several different wood cultures. You are in excellent company by that standard.
In general (and from my observations)...mortise chopping...is an individual skill set of the Master, their material and work style with the tool type or style dictating a given approach.
My only actual critique (if I may offer one) is that the mallet/hammer selection for the heavy mortise chisel was not well matched or in balance to its form and style of use typically. For that heavy style of mortise chisel employed first, a much more robust hammer/sledge is what would traditionally be used, and with much heavier blows. Grant you I am a Timberwright, and use a 3lb (and sometimes 4lb) Metal Mallet/Sledge used by carvers. This speaks to style and traditional approach.
Again, much thanks for your video, and what you do for the craft!
The best MnT video I have ever seen! You make it look so simple! I'm going to start building my double-doors tomorrow with some rather crappy pine. I have 20 MnT joints to do so I will add this video to my bookmarks!! :D
oh yeah. you are defiantly the instructor ive been looking for. thank you
As always, excellent video and narration! Mr Sellers, you are a master craftsman, and a superb teacher to many of us. Thank you for sharing this upload!
Without ever seeking instruction on mortise cutting this is exactly how I attempted and achieved cutting my first mortise and find this style very controlling and comfortable. Thanks Paul
This changed my life when I was building my post and rail fencing with interlocking wedged tenons last year. Saved me so much time. I had bought an auger bit to help drill out the mortises and then discovered your bevel down technique was quicker and easier. Thank you!
well
thats actually basic knowlege and can be found in any carpentry book
atleast in mine :P
Lucky you! My books all had me chiselling from the centre out with the chisel perpendicular. What is the title of your book - sounds like a good one.
german one :P
there is also a wepsite (also in german)
showing all joints step by step
including nice techniques
And you won't show me a link to that either presumably. Oh well, we did win the world cup once though at least :S
i thought you could type those things in yourself :P
As a 45-year woodworker I can say that this is one of the best instructions I have ever gotten. What a revelation.
I watch this video every time I'm about to spend money on a mortise chisel.
🤣🤯
Same
The good set of bevel edge chisels are really all you need. Really depends on what you make. The only time i've seen paul use anything but a bench chisel is on thin long mortises.
Pura vida me too hahaahha but I want to practice paul's mortising technique
😂😂😂😂😂 That is just the funniest comment ever!!
Mr. Sellers you have changed my life. Thank you, you are an excellent teacher.
Seeing the action of either-style chisel behind glass really helps understand what the cutting edges are doing.
Thanks. I really appreciated how simple and quick this method is. So much faster to learn from someone truly experienced. Thanks.
Thank you, Paul - both methods are very spectacular; as a newbie I start the second method first.
The ending performance indicators offer excellent motivation to my work: highly appreciated! Kind regards from Hungary
You are welcome and I am glad to bring some clarity.
Excellent demonstration. It's amazing to see that the bevel edge chisel leaves a smoother finish, reaches the corners better and does the job faster. Thanks a lot Paul for sharing this very insightful VDO.
Cheers, Kem
I am brand new to wood-working and I would like to thank you for taking the time to produce this video. I have been trying to teach myself to cut mortice and tenons from a book. I have particularly struggled to cut a neat mortice. Since following the method you describe I have cut my best mortice so far in a fraction of the time. Improving is so rewarding. I find your resources inspiring and have found a real passion to improve my skills and keep learning.
Thank you. I am very grateful.
Awesome demonstration!
Paul you are the best !
Thank you for being who you are!
I use bevel edged bench chisels all the time . I have a nice set of mortice chisels but they are only use on BIG ,and I mean BIG,joinery . Excellent teaching video .he does not force his ideas on you ,he always leaves it up to you.
another great video Paul & expertly done i've been a carpenter for 15 years every time i watch one of your videos it helps take my carpentry & joinery to the next level.
I am so new to working with hand tools I didn't even know that there was a different type of chisel for mortise work. thanks for the lesson. very informative and interesting to know about all the old tools out there.
Thanks for all the advice. Means alot to people who have to learn everything on their own. Been dabling in woodworking for 2 years now. I've built a few boxes and stands all with my hands and feet. No power tools no bench.
You, Genius of woodworking. Thanks a Lot to share tour knowledge.
Holy cow! Great tutorial. Never ever would have attempted one without using the drill press, but after seeing that, I may find the courage yet. Many thanks for sharing your talents.
Thanks Paul. This video was an excellent demonstration.
Thank for sharing Paul!! You’re my go to for woodworking videos
Tape can be fixed to the chisel blade as a rough depth gauge, or a combination square with the rule set to your working depth. The downside to using tape is it tends to wear away or wrinkle up and needs re-setting fairly often, so instead I'd recommend marking the blade using a marker pen.
Thank you sir, because of you today i am a better woodworker
Paul, thanks for the excellent video. I now understand much better what you were demonstrating in your other videos on mortises and tenons. The glass wall idea was a terrific visual aid . . . and used very effectively by a great instructor.
I watch this if I havd gone a month without cutting a mortis. Just a nice refresh. I enjoy flitting between the mortis chisel and a cabinet makers chisel, just because I enjoy chisels.
You have a new subscriber in me sir! Thank you for sharing this and showing us newbies (and vets) that you don't have to buy super-expensive tools to do woodworking. It's disheartening for me starting out to read in the forums most people saying "just bite the bullet and buy Lie-Nielsen" quality chisels and planes. Starting out, I don't want to shell out $150 for three chisels when a basic chisel set will do.
I look forward to consuming your other content and learning these skills because I want to have hard skills I can pass onto next generations. Thanks Paul for your passion and wisdom!
Darned impressive demonstration!
Love your videos Paul. Good pace, not so fast that people miss things but not talking to your audience like they are children
Sir, you are the most skilled ”chiseler” I’ve ever seen
I sure wish I had found your videos when I started serious woodworking 11 years ago. I would have save many hours of trial and error on dovetails and mortises. I'm certain I have much more to learn here. Thanks so much.
This was really helpful. I am working in building my first table for a friend. It’ll be an 8 person farmhouse style, and I wanted to make a couple of through tenons with wedge locks in the skirt to help support the top and make it a little more sturdy. I was afraid I’d have to go buy more chisels, and that’s not really an option for me right now being off work. Being able to work with what I’ve got is great. Much appreciated!
Master Sellers what an inspiration you are to us all
Great video, as usual Paul. "Make your own mind up".........I wish I had the diplomacy that you have. Great technique, simply demonstrated. Oh if it were all quite so simple.
This is great. I'm very surprised how much easier the regular bevelled chisel did the job much quicker, with consideration of much lighter structure and weight. And yes, the finish definitely looks much better with the second one. Thanks for sharing this technique.
I saw this technique in 2012 when it came out. I use it ever since. there ain't no better way, thanks Paul!!!
I could watch this all day.
Thank you Paul for making this video and sharing your knowledge.
Just started a joinery course. Wow you really are an artist. Very nice watching you make this look so easy.
Wow. You are fantastic. What workmanship. Great videos.
I like that you think outside the box and don't allow tradition to stifle your creativity! Nice mortises!
clean right angles, gets me in the feels every time
Work of a true professional.
Thank you for teaching! I learnt something today. Will help a lot in my practice.
absolutely love this vid. i am a beginner myself and just the fact that i don't need to buy an extra tool on it's own is great. plus the technique works just fine for me
Good night Sir it's the high technical of our TEACHER Mr Paul Sellers
Very good demonstration video
Excellent explanation and teaching method! I’ve been watching your videos and learnt a ton from you! Thank you for sharing your experience and knowledge Paul!
Thank you Paul I enjoy your videos very much! Keep them coming.
Very impressive. Last night was watching a Japanese craftsman demonstrating the same project and it took him twice as long and was no cleaner, neater. I am not familiar with the mortise chisel you were using since I have always used a set of handmade Japanese chisels that were passed on to me by my former wife's, mother of my children, uncle. Though you stated that it did not cut as cleanly I was intrigued by your use of the tool. This was my first watch but it's enough to get me subscribed. Thank you.
Thank you for this informative instructional on a fundamental joinery skill.
Paul, thanks for posting this. I’ve never been able to get these to work very well until I watched this video and immediately realized it was my technique. You showing how you work the bevel edge perpendicular to the base is the key to it... seriously that make a light bulb go off for me and it solved all my chiseling problems :)
I was actually going to buy mortising chisels assuming I couldn’t do it right because I was using the wrong chisels when it was really just me doing it wrong so you’re saving me a lot of money!
Also, I like the way you pronounce lever. Leeeever. :)
Thank you, Paul. From you, I finally know some real culture of UK.
Brilliant method. just tried it and it worked well and fast. Before I've tried the "Drill it out and tidy up" method and the Wood Occupations method from the middle out. I cut with a 13mm chisel and left walls 3mm thick each side no problem in about 5 minutes.
Paul, thank you for the videos. I'm not a wood worker myself but I very much enjoy watching woodworking videos.
If I may make a criticism, I don't think the amount of time taken to cut mortises is very relevant. Every mortise is cut as fast or as slow as the woodworker cuts it! I think the highlight of this video should be the efficiency and, quite frankly, accuracy of the bevel edge chisel as opposed to the mortise chisel.
All in all, great video. Very informative.
I love the video! I have to make four farm tables and I'm to the point of cutting my mortise and tenons! Thank you again and stay blessed!
Thank you Mr. Paul sellers. I've learned so much from your video's.
Started a new project today… A Morris chair, and I needed a good way to make all the mortises necessary and I have started to use this method and by my 3rd one its amazing how good my mortises are coming out using this method with a bevel chisel. Really amazing video and great tutorial.
I agree, by my 3rd one, I was flying along too!
Paul, thanks for showing me how! I really appreciate you passing on your experience.
I had a chance to try Paul's technique on a roubo workbench Im building. The posts are 5x5 jarrah and Ive cut a set of through and stop mortises cutting out the waste with a forstner bit mounted on a drill press and manually squaring the corners. As Im still a WW neophyte, the mortises are quite rough and loose but using a Japanese bench chisel and Paul's approach has made an immediate and huge improvement in the mortise Ive just cleaned up. Thanks, Paul! Thanks, LizardWizard08!