Really exciting! I'm just a retired homeowner; got into cordless tools many years ago. Discovered the Milwaukee cordless ratchet. Now I have six M12 tools. Looking at the torque wrench and a few other tools from this video for future purchases, plus maybe a heated jacket. Thanks for the video.
yea, i caught that. shame on milwaukee not teaching thier operators Do's and don'ts of the Particular tool they are demonstrating & General tool safety. ive Learned, Let the Blade do the cutting and NEVER Push a Cut. if it does NOT Cut. The Blade is dull and NEEDS REPLACED. He was pushing the tool HARD Through a cut. a BIG no no. Also, HE SHOULD HAVE BEEN WEARING GLOVES ! Cmon milwaukee !
Making Milwaukee And It's Affiliates - Founder: A. F. Siebert & President: Steven Richman Look Good Since 1924 SAFTEY FIRST AND WEAR DID WE PUT THE GREEN HARDHATS JOE JOE
thanks to you and my son i now have been getting Milwaukee tools. i use to be a big porter cable guy. because everyone used the big D stuff and i wanted to keep my stuff from going missing on a job site where everyone uses the same stuff like when you go the only power source and there are a dozen of the same chargers plugged in. now we brand our stuff and spray paint it.
Hey Stanley, I gotta commend you on the total quality of this video. Not to say your others aren't as good, rather in comparison to a couple of the other folk's NPS videos I saw. They may have been rushing to get their video out sooner, to get the views, but frankly it's a MUCH better viewing experience to watch this one. Reasonably short clips for each product, you captured the pitch, the demo, and sometimes a useful question or two, with a voiceover when necessary. Thank you for the effort you put in!
My NiCad Millwaukee drill is still going strong. Just got a new m18 drill and driver kit and wow it's phenominal. I was using it to fasten into concrete on a landscape job and i can't wait to beat it up and use it for years. Two thumbs up for Milwaukee.
Nice gear for the kit , wish I wasn't so old it's like a hole new work life is born with these exciting new inventions in tools and equipment, and no power leads to mess with 😀😚👌
Congratulation Milwaukee! Stanley just hooked you up with a large purchase order! Was on the fence. Not anymore. Thanks to you too Stanley! Great videos!
Ya I noticed that as well...I love the flexvolt concept but no1 is close to milwaukee..I love that u know they're not going to be changing from 12v 18v after paying hundred for batts..love kobalt price and brushless motors and cheap batterys but to many diff volts 20v 40v 60v 80v
One thing that seems to be missing from the cordless market is, an adapter that allows a cordless tool to run on house power. Of course that would affect the battery sales side of things but would be much more convenient when on a production project.
Ooooo, the power fishtape is neat. I’ve dealt with pulling conduit wire without lubrications alone. A power tape would’ve been awesome and definitely nicer than pulling by hand on a ladder above your head.
My favorite tool was the power fish tape. If i had that yesterday it would have made my life so much easier. We had a hell of a time pulling wire yesterday. We got it done but it took us waaay longer than it should have.
Sockets that are square on the outside is a bad idea it’s gonna cause you clearance issues somewhere and then what your gonna go get your normal round one
gabriel guzman that's selling personal information. I had two adds one after the other. One was chocolate I just bought chocolate. They know everything mate.
Yes sir. I use grinders all the time on euro cars to clean the hubs, so the wheels do not stick. That portable grinder has been a dream of mine for years!
The more I follow you the more I get astonished! So many tools we never see before in Europe especially in Italy, Milwaukee never will distribute them here! And so bosch I Koki and other! No way! I know where to go on my next holidays with big empty bag and full credit card! Wow! Really, USA is toolaholic paradisa! Btw I love they have real girls showing down products, here in tools exhibitions they are just in high heels smiling useless and know nothing about products! These girls are real and good ones in job and handling tools! Love them. Thank you so much for sharing!
And there isn’t much to it either. The most that you need for that is a small motor or a servo. The LEDS of course. And a transmitter and receiver. Not to mention that thing sounded like a chinsy POS when he slapped it onto the stairs. Hell, an RC car has that much and more, which don’t cost $700
I have to say I am pretty impressed with team Red at this point. I ended up with a lot of DeWalt because Milwaukee was late to the party on things like the 12" miter saw etc. Just a shame that jumping ship is such a bitch nowadays once you are invested in a battery system. I hate having different chargers in the truck.
I agree they seem to be slower to bring out new stuff but when they do it's usually better than DeWalt. I have less and less reason to stick with DeWalt. Milwaukee still don't have the DeWalt battery inverter which I use a lot. I wish somebody would make a bigger table saw platform. They have enough power but too small to support cutting 4x8 plywood accurately.
great video Stan, your brave taking that pic of your wife,LOL, the Milwaukee line of tools are getting better each year and i have always used Makita with no issues for allot of years now, mechanic buddy has the Milwaukee impact wrenches in 1/2" & 3/8" and am a believer, amnestying i would love that job site radio, its a beast, would be great for the lake, they are totally water proof in the rain we tested mine and still works great
The electricians fishing snake was pretty cool but the compact router and the right angle M12 drill are what I’m excited to have. Good vid Stanley. God bless and go get em.
I have a number of their tools at work. Just today, I got their powered grease gun. I haven't had a chance to use it yet. I will next week as I have a lot of things to go lube. It's amazing how many different battery-powered tools they now make. Just about anything you can think of. But I do have to say, Battery prices are out of this world. When 1 battery is in the $200+ range, Ouch!!!
I'm getting near retirement but, I have some Milwaukee tools, however, I won't be buying all of these. Seeing the commitment Milwaukee has made to these battery sizes, I will probably buy some more cordless Milwaukee tools.
I have been so focused on some of the M18 tools they are releasing that I never knew about the M12 die grinder! Will definitely have to add that to the box!
I expect milwaukee to produce the 3 in 1 m18 self propelled brushless lawn mower and spank the ego makita toro snapper etc. In the very near future. The milwaukee platform is killing the competition especially around the holidays with the combos and packout tools. Salute
So, where is the battery video post? Ps. It would REALLY be helpful if you RUclips posters would NUMBER THESES LIKE TV SHOWS. . S1/E4 (Season 1 / Episode 4. Would make it so much easier to track things. Nice video. 1st timer. And while I 'm thinking of it - What line of tools would you go with?
DeWalt comes out with cordless worm drive circular saw and framing nailers* Milwaukee: yo dawg can we copy your homework? DeWalt: yeah just don’t make it too obvious
Naw dude he wasnt even close to contacting his left arm with the router bit. Slow it down to .5X and you'll see theres maybe 3 inches between the bit and his arm. However, it was too close for comfort. If he had more experience with routers, ALWAYS USE BOTH HANDS!!! Routers are HIGH-RPM tools!!! Meaning they create alot of rotational force, especially when taking a full bite and most dangerous when equipped with a large bit thus more surface area creating a larger cut on material. I've used routers a good amount of time especially with a 1/4" triple flute 1"depth cut plunge bit spinning @21,000RPM's taking a full bite!!! I tell you what boy, it's a damn good and exciting workout!!!!
I have the original Milwaukee drill and impact driver set! Is it worth the money to buy the brushless fuel set? My original ones still work great and I put them up against a lot of other tools and prefer my Milwaukee every time! Any input is greatly appreciated! Thank you in advance!!! Keep up the awesome videos. I have learned a lot from your channel!!!
When he pulled the guy with him and the blocks all I can think about is buy that thing just to throw a hook over the wall and pull myself up like Batman haha
I love the crates. Wow Milwaukie impressive Powerful cordless tools. I had a look at the high powered cordless chipping hammer claimed 4.5 joules of chipping impact. The metabo cordless has 2.1 and a 2.5.
As a soldier I'm always looking for simple stuff like eye and hand protection. Can you get a pair of the glasses and compare to Oakley and Wiley X (tinted or clear).
I have been waiting for a cordless angle die grinder for forever! Believe it or not there really isn’t a single electric version on the market! That’s gonna be amazing.
I’ve already bought the 40 inch Steel Work Cart, it’s nice! Looking forward to the new PackOut stereo charger. Will be doing a video on the work cart when I’m back home again.
Really exciting! I'm just a retired homeowner; got into cordless tools many years ago. Discovered the Milwaukee cordless ratchet. Now I have six M12 tools. Looking at the torque wrench and a few other tools from this video for future purchases, plus maybe a heated jacket. Thanks for the video.
You're welcome, god to know that the vids have helped you out!
Who else thought he was about to make a cutout on his hand at 18:27
Yeah, I caught it. He looked around like, "did anyone see that? No? Ill play it cool then..." haha
You could tell he was a wee bit nervous after that.
someone should show the demonstrators how to use their own tools safely! I bet he crapped his pants!
yea, i caught that. shame on milwaukee not teaching thier operators Do's and don'ts of the Particular tool they are demonstrating & General tool safety. ive Learned, Let the Blade do the cutting and NEVER Push a Cut. if it does NOT Cut. The Blade is dull and NEEDS REPLACED. He was pushing the tool HARD Through a cut. a BIG no no. Also, HE SHOULD HAVE BEEN WEARING GLOVES ! Cmon milwaukee !
Making Milwaukee And It's Affiliates - Founder: A. F. Siebert & President: Steven Richman Look Good Since 1924 SAFTEY FIRST AND WEAR DID WE PUT THE GREEN HARDHATS JOE JOE
thanks to you and my son i now have been getting Milwaukee tools. i use to be a big porter cable guy. because everyone used the big D stuff and i wanted to keep my stuff from going missing on a job site where everyone uses the same stuff like when you go the only power source and there are a dozen of the same chargers plugged in. now we brand our stuff and spray paint it.
Hey Stanley, I gotta commend you on the total quality of this video. Not to say your others aren't as good, rather in comparison to a couple of the other folk's NPS videos I saw. They may have been rushing to get their video out sooner, to get the views, but frankly it's a MUCH better viewing experience to watch this one. Reasonably short clips for each product, you captured the pitch, the demo, and sometimes a useful question or two, with a voiceover when necessary. Thank you for the effort you put in!
Yeah it is obvious the wife shot most of the video. Quality is awesome. Haha you deserve that Stanley for the freeze frame at the beginning.
The drill bits, die grinder, and multi head driver have my interest. Great video, thanks for posting, looking forward to the next one !
Thank you, more to come!
My NiCad Millwaukee drill is still going strong. Just got a new m18 drill and driver kit and wow it's phenominal. I was using it to fasten into concrete on a landscape job and i can't wait to beat it up and use it for years. Two thumbs up for Milwaukee.
Nice gear for the kit , wish I wasn't so old it's like a hole new work life is born with these exciting new inventions in tools and equipment, and no power leads to mess with 😀😚👌
Congratulation Milwaukee! Stanley just hooked you up with a large purchase order! Was on the fence. Not anymore. Thanks to you too Stanley! Great videos!
Thank you!!
Excited for Milwaukees’ new line up! Thanks for capturing it!
For sure, thanks !
DeWalt was SAVAGE. All DeWalt flexvolt ads during this video.
Same!! 5 durning the course of the video!
I got all ToughSystem ads
Ya I noticed that as well...I love the flexvolt concept but no1 is close to milwaukee..I love that u know they're not going to be changing from 12v 18v after paying hundred for batts..love kobalt price and brushless motors and cheap batterys but to many diff volts 20v 40v 60v 80v
i did not see any ads. iPhone , Yea baby !!! Thank you Apple 🍏 !!!!
@@OcRefrig IPhones still get ads you moron
One thing that seems to be missing from the cordless market is, an adapter that allows a cordless tool to run on house power. Of course that would affect the battery sales side of things but would be much more convenient when on a production project.
The torque wrench and concrete saw are awesome. Can't wait till October. Great job on video content as usual.
Thanks Mike !
This is nuts.
Milwaukee has so much new stuff it's overloading my brain!!!!!
Ooooo, the power fishtape is neat. I’ve dealt with pulling conduit wire without lubrications alone. A power tape would’ve been awesome and definitely nicer than pulling by hand on a ladder above your head.
Yeah, I need to see more about that fish tape, a couple days ago I had the better part of a 200 footer in a duct. That's no fun in either direction.
My favorite tool was the power fish tape. If i had that yesterday it would have made my life so much easier. We had a hell of a time pulling wire yesterday. We got it done but it took us waaay longer than it should have.
Too bad it was a day late but thanks for watching Alex!
Thanks for the great coverage. I can't wait for the 90* die grinder - I love how Milwaukee is fleshing out the automotive tools.
No problem Kyle, thanks for watching !
Sockets that are square on the outside is a bad idea it’s gonna cause you clearance issues somewhere and then what your gonna go get your normal round one
Yea but when you get mad and throw the Milwaukee socket it won't roll so far away and ya won't have to walk so far to get it!
Yep. There's a reason sockets aren't shaped like that
The square end is not bigger then the round end that's how it works in not rolling around it's the same diameter
I would have loved to see AvE invited to this event.
now that would be awesome
Milfucky xd
@@michakazmieczak3880 Best comment on this whole post!
I think he would enjoy a Makita event. The batteries are good, but I don’t think he likes the tools too much.
He'd have to wear a burqa
Hilarious how I got 3 different Dewault ads during this lmao
Right
The competition
gabriel guzman that's selling personal information. I had two adds one after the other. One was chocolate I just bought chocolate. They know everything mate.
Same, and they were all bad jokes.
check out adblock no more advertising on youtube
Seriously digging that die grinder. Air hoses are such a pain.
Yes sir. I use grinders all the time on euro cars to clean the hubs, so the wheels do not stick. That portable grinder has been a dream of mine for years!
That pull out slide on the cart is badass! Definitely getting this for my shop
Awesome Jimmy, thanks for viewing !
750 for the remote search light. I don't think so
The more I follow you the more I get astonished! So many tools we never see before in Europe especially in Italy, Milwaukee never will distribute them here! And so bosch I Koki and other! No way! I know where to go on my next holidays with big empty bag and full credit card! Wow! Really, USA is toolaholic paradisa! Btw I love they have real girls showing down products, here in tools exhibitions they are just in high heels smiling useless and know nothing about products! These girls are real and good ones in job and handling tools! Love them. Thank you so much for sharing!
I litterally went "WHAAAT!" OUT LOUD for that light. When he said $700
Me too.. Is it true that price..cause other tools price,i could say it reasonable..
Thought i was going to hear $70
And there isn’t much to it either. The most that you need for that is a small motor or a servo. The LEDS of course. And a transmitter and receiver. Not to mention that thing sounded like a chinsy POS when he slapped it onto the stairs. Hell, an RC car has that much and more, which don’t cost $700
That's like the $1,000 for the Apple monitor STAND.
But infinite!!! But really I was expecting a way to tether the light to the remote
I wish Home Depot and Lowes would carry more of these new tools.
Want that Milwaukee tool wall at my workshop! It looks so so good💪🏻
Cheers✌🏻
Wouldn’t that block your glory hole?
Wow nice. Really thinking about investing in some Dewalt after all those fine commercials.
Did you say DeWalt? Well I have two DeWalt drills that won't hold a drill bit. I'll sell them to you if you want DeWalt.
10:43 “as you can see it held up pretty well” as it went through
Safety glasses look good on the skull when demoing a wobbly right angle drill driver.
I think the most clever thing on here was the squared sockets. I wonder if the corners get in the way in tight spots.
Vince. I notice no information on the water pump for the wet cut machine. The wet saw is very impressive.
Great presentation. Wow fantastic.
Wrong person...hes not Vince
compact router is looking very interesting
BTW that digital torque wrench is sick! Gonna have to grab one of those.
Wow, this company's innovation is next level. They are going places, I gotta find out how to get on the Fuel team.
Literally just bought some Milwaukee drill bits for work snapped on the second hole. Went straight back to harbor freight
The Ad at the beginning of this video was for DeWalt! 🤣
I love when u go to these events...thx for sharing
No problem, thanks for watching !
M18 Automotive Jump pack
M18 AC Inverter
M18 Coffee Maker
M18 Pressure washer
Milwaukee Camping line
M18 Ovens and hot plates
I have many more ideas.
TurboDieselDan pressure washer will be good in wet trades also cleaning paint rollers.
M18 grill
I'll buy the coffee maker
коффе майкер - хорошая идея. надо переводить домашнюю технику на милуоки))
(Milwaukee buys out prius)... introducing the new Prius m18 fuel brushless 4 door sedan🤣
We now have Milwaukee tools on our fire truck, and our extrication tools “jaws of life” use Milwaukee batteries now.
Wow that's cool! Post a pic
I just switched to Milwaukee this week from Dewalt
so cool stan good part was i didnt have to wait inline to get in. i just fast forward!thanks for showing all the cool new stuff!
You're welcome Joseph, thanks for watching !
I’ve been waiting for that radio since the pack out came out, I’m also looking at the new skill saw!
I have to say I am pretty impressed with team Red at this point. I ended up with a lot of DeWalt because Milwaukee was late to the party on things like the 12" miter saw etc. Just a shame that jumping ship is such a bitch nowadays once you are invested in a battery system. I hate having different chargers in the truck.
They’re all great, but first for me is the concrete saw!
Say what you want about Milwaukee, but they sure aren't skipping out on innovation! That's a lot of new products for one year.
Hubby just got packout after ridgid for yrs and you can tell they are detailed very well thought out he loves it!
Basically just copied alot of dewalt's tools. Not bashing Milwaukee I have both but nothing new here just new for Milwaukee
I agree they seem to be slower to bring out new stuff but when they do it's usually better than DeWalt. I have less and less reason to stick with DeWalt. Milwaukee still don't have the DeWalt battery inverter which I use a lot. I wish somebody would make a bigger table saw platform. They have enough power but too small to support cutting 4x8 plywood accurately.
@@DK-jd8bj what construction tool is better then flexvolt?
It is a great trade, because it is the product that everyone in the world is waiting for.
It would be nice to have a fan that tracks your moment and blows cool air on you in the room you are working in!
great video Stan, your brave taking that pic of your wife,LOL, the Milwaukee line of tools are getting better each year and i have always used Makita with no issues for allot of years now, mechanic buddy has the Milwaukee impact wrenches in 1/2" & 3/8" and am a believer, amnestying i would love that job site radio, its a beast, would be great for the lake, they are totally water proof in the rain we tested mine and still works great
Thanks Bob!
Awesome selection!
I want that Cutoff Saw!
The router too.....
They really have some cool gear 👍
Milwaukee is hands-down the cordless king! I have as many of their tools as I can afford.
Thanks for sharing. For me and what I do, I think the drill/driver would be the first thing I'd buy.
You're welcome, hope you found the video helpful !
lol @ that Milwaukee router guy. always keep both hands on the tool. grate video cant wait for battery vid next
Lol, thanks !!
OK. If you start off a Tool Convention with clapping and yelling and cheering while I walk in I'm going to turn 180° and go research online.
Yeah, what was that about. Sheesh.
I think I totally relate to the performance of the Milwaukee tape measure of overall stiffness.
I'm excited for the cut off saw for municipal applications. Nothing like getting gassed out in a trench cutting pipe!
Still no track saw?
Milwaukee really stepped there game up there so many awesome tools that I would love to get great video loved it
Awesome products and awesome production by you. Of course google would suggest a DeWalt commercial during this video.
That pack out dolly would be great for aircraft contractors especially if it had drawers.
The electricians fishing snake was pretty cool but the compact router and the right angle M12 drill are what I’m excited to have. Good vid Stanley. God bless and go get em.
I get the feeling the milwaukee guys and gals talking about the tools have never used a tool besides at a trade show.
Of course they haven't but would you take advice off a guy that had but Milwaukee could pay?
18:27
I can promise you that!!!
So, doesn’t mean they don’t know about them.
Kristopher Hasenbuhler oh you can? So you personally know every single one of them huh.
I'm digging the ratchet, and the drill and drill bits.
Cool, thanks for watching Stacy!
I always get hungry when you tour a good candy store like Milwaukee tools! Dangit!
I have a number of their tools at work. Just today, I got their powered grease gun. I haven't had a chance to use it yet. I will next week as I have a lot of things to go lube. It's amazing how many different battery-powered tools they now make. Just about anything you can think of. But I do have to say, Battery prices are out of this world. When 1 battery is in the $200+ range, Ouch!!!
Thank you for the input and comments JB!
great vid, I really hope that the M12 Torque wrench will be available in the UK.
Thanks Tom !
I'm getting near retirement but, I have some Milwaukee tools, however, I won't be buying all of these. Seeing the commitment Milwaukee has made to these battery sizes, I will probably buy some more cordless Milwaukee tools.
Looking for them to do a power center/inverter like Dewalts
If i had enough money to buy these tools, i wouldn't need em
Their not expensive...... cost vs value.
The saws are impressive, back in the day at IBM the fish tape would have been great.
Man these are my favorite videos!! Love tools, a bit of a tool junkie!! Keep it up brother!!
Thank you Jason!!
All brand new blades and bits help too. Real life tests would be next step... Every ad played during this video for me was DeWalt. Found it funny.
Love the compound miter saw and the torque wrench and the concrete saw. Awe shucks I love them all and I love milwaukee tools
That's great Brad, for viewing !
That 90º M12 Fuel die grinder darn near made me moist.
I have been so focused on some of the M18 tools they are releasing that I never knew about the M12 die grinder! Will definitely have to add that to the box!
I expect milwaukee to produce the 3 in 1 m18 self propelled brushless lawn mower and spank the ego makita toro snapper etc. In the very near future. The milwaukee platform is killing the competition especially around the holidays with the combos and packout tools. Salute
Holy damn. That nail gun. Fuuuuucking sick.
So, where is the battery video post? Ps. It would REALLY be helpful if you RUclips posters would NUMBER THESES LIKE TV SHOWS. . S1/E4 (Season 1 / Episode 4. Would make it so much easier to track things. Nice video. 1st timer. And while I
'm thinking of it - What line of tools would you go with?
Came for the milwaukee tool news... left with a happy smile from that 2JZ at 12:58
Glad to hear it, thanks for being here!
@13:00 Makita has some impressive extended assembly ratchets. Torque settings and some other cool features.
I didnt see the m12 surge impact, comes out in august though
Bro I just got a ad for dewalt drills 🤣🤣🤣
Would have like to have seen pullout drawers introduced on the Packout instead of the radio..but the radio is nice .
DeWalt comes out with cordless worm drive circular saw and framing nailers*
Milwaukee: yo dawg can we copy your homework?
DeWalt: yeah just don’t make it too obvious
very nice Milwaukee Power Tools
Thanks for viewing!
I'm excited for the router and torque wrench. Can't wait
I’m kinda stoked about the nailer
18:26 he almost cut himself with that router
Naw dude he wasnt even close to contacting his left arm with the router bit. Slow it down to .5X and you'll see theres maybe 3 inches between the bit and his arm. However, it was too close for comfort. If he had more experience with routers, ALWAYS USE BOTH HANDS!!! Routers are HIGH-RPM tools!!! Meaning they create alot of rotational force, especially when taking a full bite and most dangerous when equipped with a large bit thus more surface area creating a larger cut on material. I've used routers a good amount of time especially with a 1/4" triple flute 1"depth cut plunge bit spinning @21,000RPM's taking a full bite!!!
I tell you what boy, it's a damn good and exciting workout!!!!
Lol. I was just at VCG RUclips Chanel. And i watch you cut some bricks. 😊
Cool Joar, thanks for watching !
milwaukee has been doing things right and are leading the industry. good for them and keep coming good stuff
Thanks JR
New subscribers here!!! The Right angel die grinder and extended reach ratchet. those are the 2 I'm waiting for to come out. Awesome video bud.
Thank you AJ and really glad to have you here!
I have the original Milwaukee drill and impact driver set! Is it worth the money to buy the brushless fuel set? My original ones still work great and I put them up against a lot of other tools and prefer my Milwaukee every time! Any input is greatly appreciated! Thank you in advance!!! Keep up the awesome videos. I have learned a lot from your channel!!!
That m12 torque wrench was awesome!
For sure James !
When he pulled the guy with him and the blocks all I can think about is buy that thing just to throw a hook over the wall and pull myself up like Batman haha
I’m in love
with that cordless nail gun. Darth Vader needs to go shopping.
I love the crates. Wow Milwaukie impressive
Powerful cordless tools. I had a look at the high powered cordless chipping hammer claimed 4.5 joules of chipping impact. The metabo cordless has 2.1 and a 2.5.
21:10 I see he brought his wife's machine in for the demo, usually dont see a hard hat mounted on it though
#wwas? (What Would AvE Say?)
As a soldier I'm always looking for simple stuff like eye and hand protection. Can you get a pair of the glasses and compare to Oakley and Wiley X (tinted or clear).
Sales rep: "But I don't even like coffee"
Marketing manager: Quick, just 4 more double expresso's before the doors open"
Sjssosofhdjdpaziudisiiosooooahsisosoosoisiisoaaossusudhudsooaaaopssisiissisisisisisooàoaaoid😋💜😂🤑🤙😎🙍🙎🤳👩😌💛💏😘👩❤️💋👩😊😘💛🙂😍😋💜🤑😎😂🤙🙍🙍👩
Sossosososososoaoosososksoaoaoaoaaoaoa9aoaooaoaooaossososoaooaoaoaoaoaooaaooaaooaoso🌻🌷🏵️🌗
Great, now I have tool envy...I love Milwaukee M12 products for my around the house projects.
I have been waiting for a cordless angle die grinder for forever! Believe it or not there really isn’t a single electric version on the market! That’s gonna be amazing.
I’ve already bought the 40 inch Steel Work Cart, it’s nice! Looking forward to the new PackOut stereo charger. Will be doing a video on the work cart when I’m back home again.