Kamusta Berto! Nice video, you did this teardown/repair because of weak wifi signal. I'm assuming it's better now. (?) Before doing this, I bet you have checked the signal quality/strength or data rate in the router ... If so, an approximate values "before/after" in the video description would be very interesting!
Are the plugs that connect the 2 motors the same? Recently received one of these cameras and the movements are wrong, have to use up down buttons to rotate cam and left/right buttons to tilt, i'm guessing the manufacturer reversed the plugs
There's two different circuit for each motors on the board of the camera. You can try to change the port of the two motors that's plugged on the board to correct it
@@bertodiy It also explains why after a reset it points directly up whereas other videos i have seen the camera points forwards, I just wanted to check that both plugs are the same (I haven't actually opened it up yet) to check.
Nadamás le falto explicar a dónde va conectado el otro extremo del cable de la antena. Mi camara es igual y ese cable está suelto del lado de la tarjeta pero no estaba soldado. Cosa que me parece ma extraño aun
I have the same problem. What's strange is that despite this it worked for a year, although the night mode is quite weak, you can hardly see anything. But two days ago it lost the wifi signal, I took it apart and now I saw that the antenna cable is not connected anywhere, a small part is just hanging out of the antenna. No older soldering is visible on the wifi module either. I don't understand how he was able to detect the signal until now. Do you have any ideas?
With these wifi cameras the motor that makes the camera pan left to right is there 4 or 5 wires going to that motor? as i have a similar wifi camera but it wont rotate right only left
you can track the pcb lay out or the area w/c the antenna is located, you can look for the cold solder and wire remains of the antenna that had been pulled out
Hi friend, i have the same camera but when the camera power is on the first time it won't rotate and there is no flush light at that time. But from the app, we can rotate it to any angle. and also its led's lights not working only black and white image show at night time not color. any solution?
Hello bro, I'm having the almost same camera, it died because of voltage up down, I opened it the inner circuit which is taking direct 220v is burned but thankfully the main upper circuit is fine, so i want to know whether this camera is using 12v power or 5v,9v? If you could help, i would be really grateful
Hello, my antenna cable is broken on both sides. I opened the camera, but I couldn't find where to connect the cable from the antenna inside. I would be glad if you could help me.
Did this to my heimvision 311, fun mods I did. Thinking it may be my first youtube video. Can't find anyone else doing a teardown on it and I hunted everywhere to find one.
Hi, I have a same type of camera and work perfectly but suddenly it disconnected from the app and I try to reset but now it does read the QR code in the app. Do you have any suggestions regarding this error and how to fix it
Hi , I the one ip. got a camera from a friend because it no longer worked. He had already thrown it on the scrap heap, I opened the camera that has two white antennas and now it turns out that a black cable from an antenna is loose but I don't know where I soldered it to. Can you help me with this , and can I send pictures to make it easier for you to see . Bert
Oh, lucky I to find a same type camera. My issue is the reset button in the circus has dropped down. I am still seeking for how to reconnect the circus so that it won't keep resetting.
Please help...i have one exact unit but when plug in the unit does not power up. please make a video on how to check for power up issue within the pcb.
try checking the power connector inside the camera, i also experienced that issue in one of my ip cam when i opened it, the power connector inside the unit from the usb is unplugged or disconnected
@@bertodiy thanks for the info. Got it to power up but now facing problem with the panning motor. It is quite tight and causing the movement to stop before homing. Do you know where to get the motor? thanks.
What is the point of watching this if you cannot explain what you're doing? Is that being too critical!? You can type a response in English, why not make a slightly more detailed explanation in your "description" box below the video?
kung gera po medyo mahirap napo yun kasi napaka nipis ng gears nun kung palalakasin naman medyo may pag asa pa try mopo palitan ng malaking speaker pag tunog langgam parin makaka bili ka sa ng mini amplifier board sa online yung 5volts 2watts amp para sakto sya sa boltahe ng cam ita tap nalang sa power source tapos yun input sa output ng cam speaker then yung speaker ililipat mo sa output ng mini amp
Salamat po, Sir. 3 watts lang po meron na mini amp. Pwede po yun? Nakabili na nga po pala ako ning battery na Sabi nyo for my solar streetlight. Thank you po.
try mopo ulit reset yung cam tas pa detect mo una rekta sa cp mo yung cam dapat ma detect yan pag dipo na detect malamang same issue ng ginawan ko ng video sir
sir dipo tanong ko lng bt kaya di maka connect sa wifi ang ip camera ko kahit ang lapit na sa modem . pwede naman dati nung sinalpak ko ln ung sd card nag offline na. na reset ko narin ayaw parin
nako sir issue talaga nyan sdcard na experience ko narin yan pag may naka salpak ng sd ayaw kumonek, ayaw nya ng hindi class10 o pekeng sd kaso ngayon kahit anong sd ayaw na talaga nyan kaya para lang magamit di ko na nilagyan ng sd huli kong ginamit yung bavin brand class10 sd ok naman sir
pero bakit kaya kahit dikona lagyan ng sd sir ayaw na kumonek sa wifi. nka 2.4g naman ako tas na reset ko na ilang beses sir. malapit nadin ako sa modem .connection failed parin sir. anu kaya dapat gawin?salamat sa sagot sir
Hello Sir I have the same camera and the brand is Kerui. My problem after almost a month of use, it stuck up in one direction during initialization. It rotates to the right and after it reaches the rear portion, it stops when rotating back to the other side. Can you help me with this? Thank you po.
Thank you for showing how to dissasemble the camera. I found a problem at disconnected - wire from the usb socket.
Kamusta Berto! Nice video, you did this teardown/repair because of weak wifi signal. I'm assuming it's better now. (?) Before doing this, I bet you have checked the signal quality/strength or data rate in the router ... If so, an approximate values "before/after" in the video description would be very interesting!
When the camera is not connected to the internet (ROUTER). Does the responsible item need programming?
How do I repair a power supply for an ip camera. do you have a schematic diagram?
Is it possible to fix the sound of the camera and also night photography?
Excelente gracias por compartir. Saludos
Are the plugs that connect the 2 motors the same? Recently received one of these cameras and the movements are wrong, have to use up down buttons to rotate cam and left/right buttons to tilt, i'm guessing the manufacturer reversed the plugs
There's two different circuit for each motors on the board of the camera. You can try to change the port of the two motors that's plugged on the board to correct it
@@bertodiy It also explains why after a reset it points directly up whereas other videos i have seen the camera points forwards, I just wanted to check that both plugs are the same (I haven't actually opened it up yet) to check.
Hola, yo compré una camara 4G usa Sim Cart, y No reconoce la frecuencia hay alguna forma de reparar???
Nadamás le falto explicar a dónde va conectado el otro extremo del cable de la antena. Mi camara es igual y ese cable está suelto del lado de la tarjeta pero no estaba soldado. Cosa que me parece ma extraño aun
¿Se le ocurrió una solución, señor?
@@bertodiy que tal, Buen día no pues no y no se a donde va ese cable, tiene punta pelada en cobre nunca fue soldado
I have the same problem. What's strange is that despite this it worked for a year, although the night mode is quite weak, you can hardly see anything.
But two days ago it lost the wifi signal, I took it apart and now I saw that the antenna cable is not connected anywhere, a small part is just hanging out of the antenna. No older soldering is visible on the wifi module either. I don't understand how he was able to detect the signal until now. Do you have any ideas?
With these wifi cameras the motor that makes the camera pan left to right is there 4 or 5 wires going to that motor? as i have a similar wifi camera but it wont rotate right only left
What element is responsible when the IP camera does not connect to the INTERNET
Hello, I have the same problem but the other way around I don't know where that antenna cable goes on the board. Could you tell me? Thank you.
you can track the pcb lay out or the area w/c the antenna is located, you can look for the cold solder and wire remains of the antenna that had been pulled out
thank you
מעולה
nice video
bro app name ?
YCC365 plus
Hi friend,
i have the same camera but when the camera power is on the first time it won't rotate and there is no flush light at that time. But from the app, we can rotate it to any angle.
and also its led's lights not working only black and white image show at night time not color.
any solution?
Hello bro, I'm having the almost same camera, it died because of voltage up down, I opened it the inner circuit which is taking direct 220v is burned but thankfully the main upper circuit is fine, so i want to know whether this camera is using 12v power or 5v,9v? If you could help, i would be really grateful
its 5volts sir
@@bertodiy But on board it's written 12v and ground
@@muhammadyazan3330 maybe its a different model from mine if its 12v
Hello, my antenna cable is broken on both sides. I opened the camera, but I couldn't find where to connect the cable from the antenna inside. I would be glad if you could help me.
watch closely to the video or upon openning your camera there is a socket inside
Did this to my heimvision 311, fun mods I did. Thinking it may be my first youtube video. Can't find anyone else doing a teardown on it and I hunted everywhere to find one.
Hi, I have a same type of camera and work perfectly but suddenly it disconnected from the app and I try to reset but now it does read the QR code in the app. Do you have any suggestions regarding this error and how to fix it
Hi , I the one ip. got a camera from a friend because it no longer worked. He had already thrown it on the scrap heap, I opened the camera that has two white antennas and now it turns out that a black cable from an antenna is loose but I don't know where I soldered it to. Can you help me with this , and can I send pictures to make it easier for you to see . Bert
you can reach me at my fb facebook.com/scout.ranger.18
Thank you
Is it possible to extrnd the mike
yes solder extra shielded wire
how flashlight going bright again?
replace the ir module or add another external ir lamp, can be purchased online
Oh, lucky I to find a same type camera. My issue is the reset button in the circus has dropped down. I am still seeking for how to reconnect the circus so that it won't keep resetting.
It happened to me too😂😂😂😂😂
Please help...i have one exact unit but when plug in the unit does not power up. please make a video on how to check for power up issue within the pcb.
try checking the power connector inside the camera, i also experienced that issue in one of my ip cam when i opened it, the power connector inside the unit from the usb is unplugged or disconnected
@@bertodiy thanks for the info. Got it to power up but now facing problem with the panning motor. It is quite tight and causing the movement to stop before homing. Do you know where to get the motor? thanks.
the motor is available in your local electronics stores just take the sample w/you so they will see,
thank you my friend😊
you are welcome my friend ^_^
Srihome CCTV camera no power paano ayosin idol
pyde ba ilagay sa b5w sir...hhhhheee
nako paps matagal ko narin naisip yan hahaha!
What is the point of watching this if you cannot explain what you're doing? Is that being too critical!? You can type a response in English, why not make a slightly more detailed explanation in your "description" box below the video?
Just Enable Subtitle, it has english sub
please subscribe
Sir, magandang araw. Sir, meron po akong cctv yung para sa E27 socket. Pano po kaya I upgrade safely yung speaker nya na mas lumakas ang tubig?
*lumakas ang tunog. Sir, pano ron po a ayusin yung gear nya. Panay nagkaka stiff neck na yung cctv ko. Lol
kung gera po medyo mahirap napo yun kasi napaka nipis ng gears nun kung palalakasin naman medyo may pag asa pa try mopo palitan ng malaking speaker pag tunog langgam parin makaka bili ka sa ng mini amplifier board sa online yung 5volts 2watts amp para sakto sya sa boltahe ng cam ita tap nalang sa power source tapos yun input sa output ng cam speaker then yung speaker ililipat mo sa output ng mini amp
Salamat po, Sir. 3 watts lang po meron na mini amp. Pwede po yun? Nakabili na nga po pala ako ning battery na Sabi nyo for my solar streetlight. Thank you po.
@@theshadow5472 basta mahanapan nyo ng match na spkr pede po pero may kalakihang spkr ang pede sa 3watts
@@bertodiy pero pwede na po yung 5v 3 watts na mini amp para don sa cctv ko, Sir?
Anna Plz light on camera not working 😢
defective module
@@bertodiy mi namber cheppandi photo pamputhanu Plz Bro
I don't understand.
it has english sub titles
sir bat ang v380 ko hindi ko makita sa wifi list ko at hindi maka connect sa wifi di rin ma reset
try mopo ulit reset yung cam tas pa detect mo una rekta sa cp mo yung cam dapat ma detect yan pag dipo na detect malamang same issue ng ginawan ko ng video sir
@@bertodiy na solve Ang problem ko nag change Ako ng power cord at na ok Ang lahat Thank you
sir dipo tanong ko lng bt kaya di maka connect sa wifi ang ip camera ko kahit ang lapit na sa modem . pwede naman dati nung sinalpak ko ln ung sd card nag offline na. na reset ko narin ayaw parin
nako sir issue talaga nyan sdcard na experience ko narin yan pag may naka salpak ng sd ayaw kumonek, ayaw nya ng hindi class10 o pekeng sd kaso ngayon kahit anong sd ayaw na talaga nyan kaya para lang magamit di ko na nilagyan ng sd huli kong ginamit yung bavin brand class10 sd ok naman sir
pero bakit kaya kahit dikona lagyan ng sd sir ayaw na kumonek sa wifi. nka 2.4g naman ako tas na reset ko na ilang beses sir. malapit nadin ako sa modem .connection failed parin sir. anu kaya dapat gawin?salamat sa sagot sir
@Berto DIY
sa cam na sir natuluyan na chip nyan maselan talaga model nayan sir e
ano pwede gawin sir pag na chip na sir?
Sir Meray is camera se Sirf ek message aata hy wifi is daetting us k bad koi masg ni aata or camera Kam ni krta offline show hota hy
Manila cctv
Mobil number bro cheppu
Hello Sir I have the same camera and the brand is Kerui. My problem after almost a month of use, it stuck up in one direction during initialization. It rotates to the right and after it reaches the rear portion, it stops when rotating back to the other side. Can you help me with this? Thank you po.
probably a damaged gear or defective motor, try checking the motor and gears
I had this happening because the USB would come undone as the ball would rotate.
Same problem. One of the wires of the stepper motor was broken.