How To Do STRING PORTAIT ART | Basics of String Art | Thread Portrait | Thread Art
HTML-код
- Опубликовано: 6 июл 2024
- #portrait #stringportrait #stringart
Learn about all you need to create a string portrait and also how to make a string or thread portrait.
Materials used in the video
1. Circular hardboard 1 cm thick and 45 cm in diameter. You can purchase similar board here - amzn.to/3dq6ZSl
2. 300m long Griffin 40 matte black craft thread rolls
3. Circular card stock paper (white) to use as background for the portrait
5. 180. galvanised 2 cm long nails
6. Household hammer
7. Scissors or paper cutting knife to cut the thread when needed
In case of any questions please leave a comment or reach out to me at crafts.genie@gmail.com
Happy Crafting,
Genie Crafts 
Хобби
Most of the channels won't share such detailed explanation.
I found interest in doing this. Thank you
Thanks. I am happy that it helped you.
Thanks for sharing! You are wild! Fantastic...God bless you!!
Thanks a lot 😊
Thank you! Many useful tips, good intro into the thread art.
Welcome 😊
Nice,, it was a good explanation👌👌🙏🙏
Thanks ☺️
I found my master, best tutorial on RUclips.
Thanks a lot 😊
Finally got the answer to my curiosity 😍😍😍
😊
It looks awesome....
Thanks bro 😊
Most useful channel 🥺❤️
Thanks 😊
Oh my god!!! So nice... you deserve millions of views and likes😍
Thanks a lot dear 😊
Wowww brother
Thanks 😊
Hello👋🏼 this is just fantastic. you are well done and thank you for such instructive videos.
Can you help what nails you use, what size and how deep should they be and how many cm above the board? the space between the nails should be enough for the thread to shift only or should there be some certain margin to keep the image?
Thanks a lot. All of your questions are covered in subsequent videos that I posted after this video. You can refer to the string art playlist on my channel. But still here are my replies in order
1. I use nails from 7 mm wall cable clip
2. The nails should penetrate at least 1 cm to be sure that they will not pop out due to string tension. They should be at least 8-10 mm above board in case you are using a dense design. If u r using thicker threads then it should be at least 1.5 - 2 cm above board. So it’s actually a factor if ur materials and requirement
3. Space should be enough to shift the threads.
Thank you so much
Welcome 😊
Thank you so much sir
Welcome 😊
Here is the life lesson...try ,try, succeed..⚡️⚡️🔥🔥🔥u made it man...😎 awesome...
Thanks man 😊
😍😍
Thanks buddy 😊
Thank you for this video! I was just wondering if there's anywhere I can buy a prenailed canvas online. I don't mind making my own but its just a little tedious.
I know that there are some vendors who do provide this but not sure exactly who sells it. Alinedeco sells it I guess
Great video! Is there a software or something that I can generate the algorithm for any picture?
Please refer to this video
ruclips.net/video/GRMltMxEcmM/видео.html
Unbelievable 😍
Thanks 😊
What is this card board length brother?? 30 cm or 50 ?
This is 34 cm diameter mdf board
@@GenieCrafts thank you bro 😍
@artistpremofficial welcome
What is the radius of board. does it change if we use board of different size
For this radius was 34 cm. With bigger. Oats you can create more realistic portraits as you will be able to accommodate more nails on a bigger board
How did u make the board edge curve design
The board came that way.
Hi! How do you keep the strings from falling apart when you take a break? How can you secure your work? Thnaks!
Tie a knot on whatever nail you are. I think in one of my videos I have shown how to tie the knot without breaking the thread
@@GenieCrafts tysm
Welcome
Thanks a lot. Your videos are always useful.
Can you please share the link to buy this circular board?
I found that in the description. Thanks a lot!!!
Great 😊
Thanks 😊
Tell me how to Create Templtes 🙏🙏 It's look so awesome 💜
Video coming soon 😊
Hey can I know if I could use STITCHING THREAD
Yes you can but y use good quality thread please
😯😯😯
Thanks 😊
how to decide that how much big board we should take and how we can decide the number of nails be inserted in the board?
All ur answers in this video ruclips.net/video/2ildkrkeseI/видео.htmlsi=9A2TUNd1odMK7vtD
Very nice ! İ can use 30cm in diameter ? 👏
Yes you can use. Just ensure that there is enough gaps between nails to loop the thread
What is the board you used and where did you get it from... Please replay
1cm thick mdf board. Got it from itsybitsy.in
Where did u get these numbers in series?
Please refer to this video ruclips.net/video/poJNEBxHUPw/видео.html
Sir where i can get the board online i don't find any board of 1cm thickness online...pls help me out
This particular board you can find on itsybitsy.in
Will this work in small cardboard or a canvas?
Smaller the canvas, thinner the thread you need. But after a point you cannot use thinner thread as it will break under tension. The thinnest thread you can use is regular polyester sewing thread. Also, I would not suggest to go below 18 inch diameter
Plz make video for the tamplets. How to make it.
Please refer to this video ruclips.net/video/GRMltMxEcmM/видео.html
Where can I get the board with good thickness and more diameter.
By the way you are soo awesome in explaining all the problems that will be seen
Thanks 😊. I got it from Amazon. Search for mdf board 1 cm thickness
@@GenieCrafts thank you 🥰🥰🥰
Welcome 🤗
Whittlewud MDF Craft Board Round... www.amazon.in/dp/B09656NTFX?ref=ppx_pop_mob_ap_share
bro how do I get the template of one with the sequence of number for the portrait of the person I want?
Please watch this video ruclips.net/video/GRMltMxEcmM/видео.html
Cant find board can we do it on canvas hard board?
Yes
is 220 size ok , the one our moms use to stitch buttons
Yes
in inche which board is good for beginners ?
18 inch board
Hey another doubt, I selected 180 number of pins only but in the instructions it also says 276, 281. What about that?
That should not be possible. Please regenerate template once again
How do I get the numbers to make a portrait?
Video coming tomorrow. Please enable notification to my channel. Video will be live at 11:00 am tomorrow India time. There is another video on this on my channel but the website used in that video is not working for everyone. Here is the link - ruclips.net/video/poJNEBxHUPw/видео.html.
I suggest you watch video coming tomorrow as it is better than my original video on the same process
Hello sir can you tell me where to start markimg in square hardboard
That will depend upon design and you can use a scale to evenly put marking to hammer in the nails. In case you are making portrait, then you will need to draw a circle and use the process I have already explained in my video
@@GenieCrafts thanks sir 💥
Can we use 19 inch round canvas ?
Yes, theoretically u can use but I have never checked if the ring if the canvas will hold under the tension of the woven threads. I have seen other artists so it though, so you can give it a try
How to parched hard board, from any online platform to parched same board
Itsybitsy.in
Hello sir,Won't it go bad after a certain limit.. It shouldn't go bad when it is customised... Can you give me an idea for that... including packing? Please tell
You mean board will go bad?
@@GenieCrafts No Sir, That's what was meant when dust caught on the thread and the work went bad
@@GenieCrafts When we give it as a gift, why don't we give it in a way so that it doesn't go bad? Can you make a video about the things to pay attention to while customizing it?please sir😍
You actually need to frame it once you have finished the portrait. That way the portrait remains in closed box and does not gather dust or moisture. But you will need frame with a little depth to accommodate for the thickness of board and nail height outside the board
Will make a video on that also in coming months
Hi bro... great work 🎉
And i hv one doubt.
.. Should the space between the nails must be only 1 cm? Or is it ok with 5 mm?
Thanks ☺️
As long as u have enough space between nails to weave the thread, any distance under 1 cm is ok
Thanks a lot...btw which thread better to use cotton thread or polyester thread?
@pskar4376 please refer to this video ruclips.net/video/1kVMrS7SW_M/видео.htmlsi=hCesqYgIQPJTeMnb
You will have to subscribe to Rising Genie membership to get access to the video
Sir which type of thread you used for this ?
Polyester sewing thread weight 80 or number 80
Heyhh I loved your work .....can you give me a favour ......actually i want the same board as you used in your work or in your video's ...can you tell me where is the shop ..I want to purchase the board and materials....
The shop is in Mumbai. Online store www.itsybitsy.in
@@GenieCrafts im also from mumbai ❤️......shop ia located near in ghatkopar?
@@vinayakgole4471 Kurla phoenix mall and ghatkopar r city mall
@@GenieCrafts thank you so much brother .....❤️❤️
Brother can you make a video of Square board instead of Circle?
Coming up in January
Instead of white background can I use black background with white threads?
The template generated is for white background only. If you will use black ground then either you will have to use coloured thread or you will have to use white thread. If you will use white thread then you will get a negative image portrait. How it will look with coloured threads you will have to experiment and find out
@@GenieCrafts okay..so better I can use black thread ryt?
@@sanushas9345 yes black thread on light background
Can I use 1mm thickness thread for this potrait string art?
1 mm thread is too thick for portrait. What i need is 0.25 mm to 0.5 mm thickness thread for portrait.
With 1 mm thickness you will need very big board to compensate for the dense space that will be created by thick thread.
Also threads are measured in weight. For portrait weight 80 is ideal thickness. Higher the weight, thinner the thread.
@@GenieCrafts thank yo soo much
Welcome 😊
Hi. Please help me, how you get this coordinate list? How can i get this list for my ön portrate?
Please check out this video ruclips.net/video/GRMltMxEcmM/видео.html
@@GenieCrafts thank you very much
Welcome 😊
Can 126 pins are okay for 30cm diameter circular board?
The problem that I have seen with less number of nails is that the template is not clear. Hence for portraits I don’t go below 180 nails. For any other design any number of nails work
@@GenieCrafts okay but the board size i have is 30 cm diameter so by 180 pins the distance is very less i.e. 0.5 cm approx.
So what should i do can you suggest?
@@jayprajapati9691 such small board is not ideal for portrait making. Even if you somehow adjust 180 nails and make the portrait it will come out very dense. Minimum diameter for portrait should be 45-50 cm
Which type of thred used
Polyester sewing thread
In some tutorials the instruction is not to let the line cross the next line, but is see you do. Sometimes you do open, sometimes crossed, you think it dont matter?
Don’t understand your question. Can u explain or elaborate a bit more.
Mathematically it’s not possible to cross the previous line with next line but the lines will criss-cross eventually as it’s unavoidable
@@GenieCrafts kinda difficult for me to explain in English. I mean from the start you go from 0 to 101 to 179 but the lines crossed. Shouldn't you go around 101 the other way so the lines stay open?
Ok. I understood now. Ideally yes, the loop around the mail head should be in such a way they the lines do not cross. But it does not really affect the final look that much. If we follow this principle the final look is slightly more pleasing
What kind of thread should I use to make string portrait art, pls?
You need a strong thread. Normally polyester threads or nylon threads are good. But nylon threads are very slippery to handle and if accidentally you lose grip of the thread, a lot of previous loops will unravel. With polyester less work in undone. Also the thread weight should be 80. Any lower the thread will be too thick and the entire portrait will become very black, even on areas where very less threads are passing. Any higher there are chances of thread breaking. But if you are able to acquire a high tensile thread of higher weight, it will be even better
@@GenieCrafts Thank you so much. It's really helpful advice 🥺❤️
Welcome 😊
How can we know the numbers ,Is there any app fr numbering
Please check out my other videos. I have covered this
How many nails do you fit in this?
In numbers
180
Please share the link of the board
Itsybitsy.in
How many nails are better for portrait design? More nails or lesser nails?
180 at the minimum
Can I use 224 nails? Will it rouin the portrait?
@@sanushas9345 you can use 224 nails. Just ensure there is enough gap between nails to easily loop the threads and the distance between the nails is same
0.004 (0.12mm) Diameter Thread is this thread good to use?
Threads go by weight. I use weight 80 thread for portrait. Any thinner it might break
How to take print for that number please tell me
I mean that 0-180 on that board
I manually add that in my nail placement diagram and then take print of it
Brother how can I konw where to take zero
For a circular frame any nail can be zero
Sir, what would be the appropriate diameter for 240 pins?
I think minimum diameter should be 25 inch diameter
@@GenieCrafts thank you sir, and last time I tried it the image mirrored, is it cause I numbered the pins anticlockwise?
Yes. Number the pins clockwise
@@GenieCrafts thank you sir 😁
That board will get on online?
I did not find the same thickness online. Mine was 1 cm thick. Max I got online was 7 mm thick which should also work but I have not tried it. Also I did not do very intensive search online. So chances are you can find online
Okei.tnq😍💫
@@diljitht6361 😊
how much can we price for this artwork?
Price = (cost of materials involved) + (hours needed to make it)*(how much you want to pay urself for each hour of effort) + profit markup
But go by your gut feel, what you feel is justified. Don’t be greedy but also don’t be in loss
can please share the link for canvas
Please check out on itsybitsy.in
What kind of thread is best that we can use? Any suggestions?
Please check out this video on my channel ruclips.net/video/1kVMrS7SW_M/видео.htmlsi=pU5kildaJDCbCPL2
@@GenieCrafts But for that I have to take membership 😢, I am a student as well as a beginner, can you please tell me only the name of the thread? Please brother?
@niladhrysinha6137 I already told you the name of thread - polyester thread. Also I understand a lot of my subscribers are college going students and hence the membership fees of Rising Genie membership is only ₹59 a month. Extremely affordable.
For 200 nails how i should mark this
Please check out this video ruclips.net/video/9sCQeox7j8E/видео.htmlsi=qasSZRiqwX6itheP
Board size, app name, nail gap???? Any pic same size?
All details in the videos in this playlist on my channel ruclips.net/p/PLwVs4pEtJFqibqQhwLwMjORAhXlW13puz&si=neIeiJw2dZdEmF14
Can you please give us link of that thread?
I get from wholesale market. I don’t have the link
What can be the diameter for 250 nails and 300 nails? And how to find the diameters?
Minimum 70-100 cm
Number of nails devided by 6.28 will give you the radius multiply it with 2 for diameter.
How v get to know where to mark 0
It does not matter. You can mark 0 anywhere.
Can you please give the dimensions of the wood which you have you used please?
18 inch diameter mdf board of 11 mm thickness
Where can i download template
Please refer to this video on how to prepare the template - ruclips.net/video/GRMltMxEcmM/видео.html
Can i do this in a 12 inch bord
Yes. But output might get too dense
What about using normal sewing thread on 12 inch board
@calmsleep8490 you will use normal sewing thread only but it will still be dense as the board diameter will be small. Also you will be able to accommodate lesser number of nails
Hard board size??
This is 18 inch diameter board
This is fantastic. But it just looks like pure Maths. How to determine the code?! I did t understand this part
Not to worry. My channel has got you covered. Refer to these videos and all your questions will be answered
ruclips.net/video/GRMltMxEcmM/видео.html
ruclips.net/video/xoT-7z6qAtk/видео.html
Kindly tell ,how to generate any templates for any project 😢
Please refer to this video ruclips.net/video/GRMltMxEcmM/видео.html
What is the diameter of the board? Thanks
The overall diameter is 20 inches. So from centre to nails it is 10 inches. Also the nails are set 1 cm inside from the board edge to avoid any split of the board.
@@GenieCrafts thanks for the information 👍
Can I use 6 mm thickness?
That’s a too thin board. Your nails will come out at the back. Also the board will bend under the stress of threads as you complete the windings
How can I get template?
Please check out this video ruclips.net/video/GRMltMxEcmM/видео.html
How to draw a circle How to calculate its dimensions
Use big compass to draw the circle. To calculate centre. Place board on a large paper, and draw the circle around it. Then cut the circle on paper. For the circle in half and then again fold it in half. The intersection point of two folds is centre of the circle and from there you can check the radius from centre to circumference
Please share the link of mdf board
Please checkout on itsybitsy.in
@@GenieCrafts it's in inch . I don't know how to select. Please tell me the price range ,so I will select . Big fan from Tamil Nadu 😍
@s.sachin9894 search for “mdf round 18 inch”
•What board is that?
•board size?
Mdf board. 34 cm diameter
Tnx😇
Civi mesafeleri 0,5cm midir
I normally don't measure the distances. I generate the nail placement diagram using the different techniques I have covered on my channel. Goal is to ensure that after you place the nails the distance between the heads of two adjacent nails is enough for you to loop the thread easily without any obstruction. In general the distances between the nails vary between 0.5 mm to 0.8 mm. But again I do not place nails by marking distances between the nails in centimeters
Normalde mesafeleri ölçmüyorum. Kanalımda anlattığım farklı teknikleri kullanarak tırnak yerleştirme şemasını oluşturuyorum. Amaç, çivileri yerleştirdikten sonra, iki bitişik çivinin başları arasındaki mesafenin, herhangi bir engel olmadan ipliği kolayca ilmeklemeniz için yeterli olmasını sağlamaktır. Genel olarak çiviler arasındaki mesafeler 0,5 mm ile 0,8 mm arasında değişmektedir. Ama yine çivilerin arasındaki mesafeleri santimetre cinsinden işaretleyerek çivi yerleştirmiyorum
Bro what is your circle size?
This one was 34 cm diameter but recommendation is to use minimum 50 cm diameter
@@GenieCrafts can I put 300 kil in 42×42 bord
@@GenieCrafts Can I make my art with 233 points
Use the formula I provided to calculate the radius of the board
@@GenieCrafts ok
That template looks insaneeee tbh....one nail gone wrong and the entire portrait will be ruined 😮
Yeah template looks scary will all those numbers. A single nail mistake will not cause that much if an issue but several will do
@@GenieCrafts one thing is definitely sure ...you make the impossible look possible 😍🙏🙌
@@ParthBhavsar_thepianoguy05 thanks buddy 😊
Board for this art...... Please send me link sir........
Brand itsybitsy sells this board. You can check on their website itsybitsy.in
@@GenieCrafts 20 Inch Diameter boards are not available at itsybitsy. Can you suggest any other?, So that I can buy.
In itsybitsy 18 inch boards are available with only 5mm thickness.
Try Amazon online
@@SRKUNCHAM Whittlewud MDF Craft Board Round... www.amazon.in/dp/B09656NTFX?ref=ppx_pop_mob_ap_share
What is the length of the nails? Can you please share the link of correct nails and thread?
I use nails from 7mm cable clip. They are approximately 2 cm long. I buy them from local shops, but you can easily get them online
@@GenieCrafts Thank you Genie... We can always count on you whenever we are stuck in any doubt... Thank you so much 😊
@Riimpi welcome 🤗
Can you please also tell how did you remove the nails from the plastic part without damaging the nails?
@Riimpi that’s easy. Hold the plastic part between fingers, hold the nail with pliers and pull. They come out easily
How to measure for 200 nails please do help me with this information
Please refer to this video ruclips.net/video/2ildkrkeseI/видео.htmlsi=D_fLZ8QMeZwJRht5
I am not able to access the video
Can you help me how to nail 200 nails and what is the mdf diameter I should use. Please do help me
@@vennelaakamaraj9177 for 200 nails the diameter would be 63.63
How much time it took to complete this bro?
Initially it used to take me around 9 hours but now I can do it in 2-3 hours
@@GenieCrafts Thanks for the reply bro....Such a nice tutorial bro keep it up....
@santhoshkumar-hg5so ☺️
ex,how i can find code for make that face????
Please refer to this video ruclips.net/video/GRMltMxEcmM/видео.html
I didnt understand how to measure the distance distance of the nails 🥺
I have explained the process in this video -
ruclips.net/video/e1lnJe7PJ90/видео.html
Please check out this video ruclips.net/video/xoT-7z6qAtk/видео.html
can i do it with my mother face ?
Yes
@@GenieCrafts can you provide detailed course in basic
My art work got darkened 😢 what to do
What was board size and thread thickness?
@@GenieCrafts board was 45 diameter and the thread was of poliester. The size was not mentioned
@shortincast board size is ok. What was loop count?
@@GenieCrafts almost 3200. Is it more than usual?
What is the diameter of the circle??
This was 34 cm but I do not recommend to use anything below 50 cm diameter
@@GenieCrafts I found it difficult to identify the steps to get started After I put the picture where do I find the numbers for the drawing??
Please refer to this video ruclips.net/video/GRMltMxEcmM/видео.html
what is the diameter of the base?
This was 34 cm diameter but I not longer use such small base. I normally for 20 inch base min
@@GenieCrafts With a 20-inch base, how many nails can fit with a distance of 0.5mm between them?
Watch this video. You should have access to it since you have joined membership - ruclips.net/video/2ildkrkeseI/видео.html
@@GenieCrafts I'm Brazilian and studying the Google translator to write and translate what you're writing, that's why I didn't understand the explanation in the video, I don't speak English... so I want to work only with 20 inch bases and I want to know how many nails you use using the division of 0.5mm, I really appreciate your help.
I normally use 200 nails which gives me a gap of around 6 mm. But you can go upto 220 nails. Use the PowerPoint method to autogenerate the template for nail placement
Thread link plz 🙃
Ajanta | Sewing Thread Black... www.amazon.in/dp/B08GJQ2MXC?ref=ppx_pop_mob_ap_share
Thank you
Welcome 😊
What is the life span of this?
The first colored one I made hanging on my wall without any frame for over a year. It is still in good condition.
Brother a cardboard ka diameter kitna hai bata do thoda 😢
Minimum diameter to be used is 50 cm
@@GenieCrafts thanks bro
Welcome
Hello sir
Hello
Piz help drawing piz
If u r asking how to generate the template please check out this video - ruclips.net/video/GRMltMxEcmM/видео.html
sorry but this looks terrible....way too many layers ....too many black blobs
This was first attempt. Video is meant to talk about prices. Check out later videos and let me know what you think