I find I have more control when I skip the define emergence profile step, and then I control it with freeform of the restoration, instead of drawing it and managing those margins toward the MUs. But great stuff, keep it up
The following question is for the intraoral scanner impressions: Have you ever had any problems with the end-work not having house for the multi-ti-bases? The end work sits properly on multiunits, but it won't sit on the Ti-bases.
The cross arch accuracy with IOS scanners is not that accurate to go to final restoration. You need a PIC or ICAM scan merged to the IOS tissue scan to get accurate results.
Hi Wood Dental. Thank you for the comment. You are 100% correct. You cannot achieve accurate results with a pre-op denture or pre-op PMMA try-in. The best workflow, for this method, would be 1) converted denture 2) PMMA try-in, and 3) final design. There are of cause other workflows available that are more digital.
With Exocad for a pre surgical how would I set up project to be able to shift midline, add teeth, etc…basically this Digital changes 1. Perform a buccal and lingual cutback to full arch copy mill cases (very easy to learn) 2. Move mid lines on full arch cases by .5-1.5 mm 3. Add 1st and 2nd molars to cases that are full arch copy mill not individual teeth 4. Take in IOS from 3shape convert to exocad and design full mouth pre surgical implant dentures 5. 15mm bone reduction from insical edge up
I didn't really turn off the screw channel. This feature rather turns off the support structure around the screw channel which you do not need other than in cut back scenarios
I am posting a New all-on-x video about model-less all-on-4 design next week on Saturday and you will be able to download the scans and Exocad CAD files!!!
![All On 4 Design with Screw Retained Bar Split File [ Exocad Tutorial ]](http://i.ytimg.com/vi/I_eaHNOibdk/mqdefault.jpg)
Check Out More Exocad Videos like this here: ruclips.net/p/PL0nY7oSWLTR0_u6ad3gR6WnTuIybsYdcF
I find I have more control when I skip the define emergence profile step, and then I control it with freeform of the restoration, instead of drawing it and managing those margins toward the MUs. But great stuff, keep it up
Thank you for your comment! You are correct! That is a Pro Tip!
same
very nice 👍
Thank you. It's an older video but still works. Did you see my newer ones?
Thank you ♥
You are welcome
thank you for teaching
멋집니다.덴쳐를활용 한작업 배워보고싶습니다
I made design videos of Dentures
I made several videos of Dentures
The following question is for the intraoral scanner impressions: Have you ever had any problems with the end-work not having house for the multi-ti-bases? The end work sits properly on multiunits, but it won't sit on the Ti-bases.
The cross arch accuracy with IOS scanners is not that accurate to go to final restoration. You need a PIC or ICAM scan merged to the IOS tissue scan to get accurate results.
Hello MDT, in your case, did you use an existing patient denture as preop data and how can you get accurate results without the preop data
Hi Wood Dental. Thank you for the comment. You are 100% correct. You cannot achieve accurate results with a pre-op denture or pre-op PMMA try-in. The best workflow, for this method, would be 1) converted denture 2) PMMA try-in, and 3) final design. There are of cause other workflows available that are more digital.
nice
Thank you
Can you make a new workflow with latest exocad software??❤
Did you see this video here?
ruclips.net/video/r_Stf1wBcWM/видео.html
With Exocad for a pre surgical how would I set up project to be able to shift midline, add teeth, etc…basically this Digital changes
1. Perform a buccal and lingual cutback to full arch copy mill cases (very easy to learn)
2. Move mid lines on full arch cases by .5-1.5 mm
3. Add 1st and 2nd molars to cases that are full arch copy mill not individual teeth
4. Take in IOS from 3shape convert to exocad and design full mouth pre surgical implant dentures
5. 15mm bone reduction from insical edge up
Very interesting question. It's probably better to answer it in a video and show you.
Excellent video, one question though! At the end why did you turn the screw channel off?
otherwise there will be a tickness around the screw channel
Correct
I didn't really turn off the screw channel. This feature rather turns off the support structure around the screw channel which you do not need other than in cut back scenarios
hey i have question, do you screw this restoration to multi unit abutments or cement them?
Screw them to Multi unit abutments
@@masterdentaltechnician1914 thanks a lot love u and ur videos😊
Thank you
hello can i get the case scans i want to get train on it .. and the scan body name
I am posting a New all-on-x video about model-less all-on-4 design next week on Saturday and you will be able to download the scans and Exocad CAD files!!!
excellent!!!. Do you provide personal tutoring/?
Yes I do. Contact me
Hyy sir
Hi
How I can get this treatment?
Please co oparetion with me.
I am not sure what your question is