Thanks needed this video. However, when I took the car to Auto Zone for a diagnostic, they couldn't tell me which wheel sensor is faulty. The code didn't even come up on their scanner. What do you recommend?
I tried to clear the codes a few times and they kept coming back so I have changed the part. 🙏 Thanks for the visit. Thanks for the like and thanks for watching.🙏
Thank you for your comment. I'm so glad my video was helpful to you. I always list the part information under the description so that viewers can easily find what they need.
@@AK-pq5ssit’s probably working. Tho the sensor are putted together I think so it shows the error code. My is like that. After testing the mechanic told me the power steering is working, just the sensor is melfunctioned
@@AK-pq5ss or try to turn your wheel all the way to left and then to right. It will recalibrate the wheel and hopefully knock some sense in to the sensor….saw it fix the issue for some.
How many prongs are inside of the speed sensor? When I order the replacements there seems to be 2 prongs on the male end but there 4 holes inside the female receiver ? Why is this ? any information is helpful , thank you
I did notice too and it takes 2 prong male connector. Why has 4 holes because it has ground, 12 volt, data, and neutral connection. Hope it helps, thanks for watching.
Hello my GLK 2013 don’t accelerate anything I put leg on the gas my car don’t speed on the road it go slowly on the road what’s the problem it doesn’t fire
@@wizdbaby880 transmission control unit. If you stop, turn the car off, open the driver door and wait until all the lights go off, you can recrank it and it'll go into gear then. But you need to change your TCU soon.
hello I have a class s320cdi 2007 I had the abs esp light unavailable and the car tends to restrict it at 3000 rpm and as soon as I let go of the accelerator it gives small gas costs on its own. I ran it for diagnostics and changed the rear abs sensor but the car still has the same faults. What should I do ? 
Why is your check engine light on? When your car's internal computer identifies a problem with the engine or transmission, it turns on the check engine light. The reasons for a check engine light turning on can range from something minor like a loose gas cap to something more serious like a faulty catalytic converter.
You don't have to reset it because after replacing the part and driving it for a few minutes it will automatically disappear. But, if you want to reset then you need a scan tool. 🙏 Thanks for the visit. Thanks for the like and thanks for watching.🙏
Hello, i have2013 Mercedes c180 and after 20 miles like your video its says currently unavailable see owners manual and after this massage its say release parkink brake (in red) and than the two messages disappear. Do you think if i change the cable its fix my broblem?
![ABS Unavailable [How To Fix]: Check Engine Light Mercedes](http://i.ytimg.com/vi/S-epnJbdG0Y/mqdefault.jpg)
![ABS Unavailable [How To Fix]: Check Engine Light Mercedes](/img/tr.png)
How To Change | Replace Rear ABS Wheel Speed Sensor on Mercedes S550 | W221 Mercedes Rear ABS Wheel Speed Sensor Replacement
Can this also cause blind spot monitoring to malfunction or is that a completely different problem from a different module?
It’s completely different module, it’s connected with parking sensors. Thanks for watching.🙏
@@EasySteps_Sidhu Ok thank you for replying!
You are welcome 🙏
Thanks needed this video.
However, when I took the car to Auto Zone for a diagnostic, they couldn't tell me which wheel sensor is faulty. The code didn't even come up on their scanner.
What do you recommend?
super bien explique, je le remplacerai moi même
Glad it helped, thanks for watching.
Very good and clear video.
So nice of you 😊Great to hear! 😊 glad to help.
Thank you so much for the like and thanks for watching.🙏
Hello? First thing you want to try is clear the codes. Just did my CLK 350 and previously spongy brakes work fine now. Try it
I tried to clear the codes a few times and they kept coming back so I have changed the part.
🙏 Thanks for the visit.
Thanks for the like and thanks for watching.🙏
Great video. Did you get the new sensor from MB dealer ? If not which brand sensor did you use. Thanks.
Right that’s what we need to know
Thank you for your comment. I'm so glad my video was helpful to you. I always list the part information under the description so that viewers can easily find what they need.
thanks I found the parts that you listed on amazon. Are those sensors still work fine till now? It’s great to see that they are friendly priced
Yes, the sensors I listed on Amazon are still working fine. Good luck with your DIY!
does this cause the power steering to not work?
No.
It does on my one bro
@@AK-pq5ssit’s probably working. Tho the sensor are putted together I think so it shows the error code. My is like that. After testing the mechanic told me the power steering is working, just the sensor is melfunctioned
@@johnson7156 yea my sensors are really funny on my w204 c63. just disconnecting the battery for 5 seconds and reconnecting fixes it
@@AK-pq5ss or try to turn your wheel all the way to left and then to right. It will recalibrate the wheel and hopefully knock some sense in to the sensor….saw it fix the issue for some.
Love you boy...respect
Thanks for the visit. 😊Glad I could help. 🙏
Thanks for the like and thanks for watching.🙏
Where did you plug in your scanner?
Plug into the OBD port (On-Board Diagnostics) which is located on the driver's side.
Thanks for watching.🙏
How many prongs are inside of the speed sensor? When I order the replacements there seems to be 2 prongs on the male end but there 4 holes inside the female receiver ? Why is this ? any information is helpful , thank you
I did notice too and it takes 2 prong male connector. Why has 4 holes because it has ground, 12 volt, data, and neutral connection. Hope it helps, thanks for watching.
Whats the scanner name and mondel?thank you
I always list the things I use in the description. Please check and let me know if you can't find it.
Thanks for watching.🙏
Also applies to CL 550 coupe of the same years :)
Yes.
Does this throw a check engine light? I am having the same issue. Thanks
NO, ABS and ESP have nothing to do with check engine light.
Thanks for watching.🙏
Hello my GLK 2013 don’t accelerate anything I put leg on the gas my car don’t speed on the road it go slowly on the road what’s the problem it doesn’t fire
@@wizdbaby880 transmission control unit. If you stop, turn the car off, open the driver door and wait until all the lights go off, you can recrank it and it'll go into gear then. But you need to change your TCU soon.
hello I have a class s320cdi 2007 I had the abs esp light unavailable and the car tends to restrict it at 3000 rpm and as soon as I let go of the accelerator it gives small gas costs on its own. I ran it for diagnostics and changed the rear abs sensor but the car still has the same faults. What should I do ?

ABS currently unavailable run flat indicator inoperative how to fix
I have same the problem but where I can buy thise scanner
I always list the things I use under the description, let me copy and paste it for you.
Thanks for the like and thanks for watching.🙏
Mercedes s550 abs wheel speed sensor - amzn.to/3VmotQa
Zurich zr13 - amzn.to/3OwE4dO
rear abs wheel speed sensor - amzn.to/3Ua67Ro
@@EasySteps_Sidhu thank you brother on the help but the scaaner is good work on S350 same model?
@@bakerjuma9416 You are welcome. Yes this is a good scanner.
Same problem, great video
Sir i Have Mercedes c200 CGi 2011 i face the same problem and steering is too hard while i am driving what can i do sir please suggest me sir
Did you figure it out?
I stuck in the snow and now engine light is on any guess why
Why is your check engine light on? When your car's internal computer identifies a problem with the engine or transmission, it turns on the check engine light. The reasons for a check engine light turning on can range from something minor like a loose gas cap to something more serious like a faulty catalytic converter.
I change the cable light still on
Did you ever get it to come off?
How do you reset the code
You don't have to reset it because after replacing the part and driving it for a few minutes it will automatically disappear. But, if you want to reset then you need a scan tool.
🙏 Thanks for the visit.
Thanks for the like and thanks for watching.🙏
Hello, i have2013 Mercedes c180 and after 20 miles like your video its says currently unavailable see owners manual and after this massage its say release parkink brake (in red) and than the two messages disappear.
Do you think if i change the cable its fix my broblem?
Possibly yes, please give a try.
Satan Ziege, Röpers im Direktors Cut...😂
I changed steering rack, and boooom! a new problem arrived!
This Mercedes is really really annoying
VERY EXPENSIVE & most of the time you will need a new pickup ring also VERY Expensive 😤
Its like $40 for the full set of speed sensors, what are you talking about?
This is not how you fix the abs bas esp light. Dont listen to this boy
The fix is don’t buy overpriced junk. Buy Japanese.
👏👏good point👍
How is a Mercedes overpriced junk?