BUILD DIARY 04 - TW200 Fork Seal Replacement and Rebuild

Поделиться
HTML-код
  • Опубликовано: 6 янв 2025

Комментарии • 8

  • @troydurbin2490
    @troydurbin2490 8 месяцев назад

    So no oil, got it!

  • @efirizaki5656
    @efirizaki5656 4 года назад +1

    We need a full gued

  • @gabegreen5461
    @gabegreen5461 4 года назад

    Never showed hot to get the inner tube out of the outer tube. Which is my hang up...

    • @Lanesplittergarage
      @Lanesplittergarage  4 года назад +1

      From memory there's an hex bolt at the bottom that just needs to be held in place while you remove the cap.

    • @efirizaki5656
      @efirizaki5656 4 года назад

      @@Lanesplittergarage how much oil you need in every bottle also what type

    • @gabegreen5461
      @gabegreen5461 4 года назад +1

      Lane Splitter Garage there is indeed a hex bolt. Problem is, I turn that hex bolt and it rotates the inner parts of the fork. Thanks for the response though 👊🏻

    • @Lanesplittergarage
      @Lanesplittergarage  4 года назад

      @@gabegreen5461 No worries there should be a nut at the top of the spring you should be able to grab to stop the inner from rotating. Good luck

  • @dragosijan
    @dragosijan Месяц назад

    You didn't show the most important things. How you took the fork apart. You're not helping me.