instead of command just type cmd on windows 7 if you have your taskbar right click on the icon it's a black box with C:\_ in it and pin to taskbar especially if you go in the DOS prompt for cgminer for your gridseeds or bitfury might work on the BAT file directly but don't have 1 on bfgminer 4.4.0 which I somehow got from multiminer cuz of the antminers I grabbed to start mining.
thinking about picking up two of these from you guys to save money. What all do they come with? Also if i connected the built in USB hubs to another USB hub then that hub into 1 RPI (1 pie for 2 miners) would there be any efficiency loss in regards to mining?
***** They come with built in (4 port) usb hub, 5 x usb mini data cable, a free raspberry pi (if you buy two miners) and a raspberry pi power cable so you can power the raspberry pi from the miner itself. We have just received new stock yesterday so offer immediate shipping via DHL (who are the best in my honest opinion).
Eyeboot i tried to download the software for the RPI using your link and my anti-virus blocked it. Is that normal? i went ahead and downloaded it, but it doesnt look like a image file, it looks like a program to install on the PC.
***** Hi, it is a zip file but inside there is a raspberry pi image file. I just checked it is still the same file. Virus scanners always flag cgminer as a virus so that is probably why you are getting an alert. It is not a virus though. Here is the download link: www.mediafire.com/download/j214ddj9l9n4tyj/RaspberryPi_Rockminer_Rocket_V1.3.0_192.168.1.254.zip Alternative download link: sourceforge.net/projects/rockminer/files/RaspberryPi_Rockminer_Rocket_V1.3.0_192.168.1.254.zip/download
I would not say your true average is 510 GHS after 2 hours and 22 minutes of mining. If you pause the video at time stamp 17:09, you can see that the GHS for the past 5 seconds is 510. BUT, for the past 15 minutes it's 477 GHS, and for the total time it's 475 GHS. I know that when you start up miners, they starts off slow because they are dialing in the difficulty setting (which will make it run slower the first hour than the second hour), but to only point out the "past 5 second average number" isn't really fair either because that number can fluctuate quite a bit as the miner requests new work, or it's working on the new work. A more fair way to report the mining speed of this unit is to let it run for a couple of hours (like you did) but then report the past 15 minute average number (477). I'd say after running for 2 hours and 22 minutes, that miner is mining at 477 GHS.
Yes that is correct, the speed for these devices does range from 475 to 520. I will post some more videos soon showing better performing miners. The video was made in a rush before i went on holiday : )
Dear eyeboot team, You gave a link to dowload the image (Version 1.3.0) for Rasp Pi, but the link does not work at all. Could you upload to another server
tấn sỹ huỳnh I just tried the link and it still works. Maybe you can try this alternative download link here: sourceforge.net/projects/rockminer/files/RaspberryPi_Rockminer_Rocket_V1.3.0_192.168.1.254.zip/download or pan.baidu.com/s/11tnJ4
How do you set the thing up without a raspberry pi. I was told I could do that, but I have no files that came with the thing. No instructions! No nothing!
Guadalupe Alvarado Both the R3 and the R4 can be connected directly to the computer and run on cgminer and Windows. All files and setup guides are available on our website: www.eyeboot.com Here is the cgminer download link: www.dropbox.com/s/y64lh5ucodfwyvr/cgminer-4.5.0-windows.rar The setup guide for R3 and R4 is the same. Here is a written setup guide: www.eyeboot.com/how-to-setup-rockminer-r3-r4-bitcoin-miner-using-cgminer.html
What is the name of the power cable to power up the Raspberry Pi directly from the R3 miner and where to find it? Can we connect 2 R3 miners to a single Raspberry Pi? Can the Raspberry Pi handle them both?
What are the Login and Password for the Raspberry Pi? I downloaded your particular image file using the link on eyeboot.com to run the R3 miner, but they are nowhere to be found. They are not the old ones: pi and 123456. What is the easiest way to set up a WIFI on the Raspberry Pi for running the R3?
Raspberry Pi Model B+ (new version with 4 usb ports) Mini Computer/Mining Controller, Buy here now: Eyeboot (Cheaper) www.eyeboot.com/Bitcoin-miner-Accessories/raspberry-pi-model-b-plus Ebay r.ebay.com/qqkVFR
instead of command just type cmd on windows 7 if you have your taskbar right click on the icon it's a black box with C:\_ in it and pin to taskbar especially if you go in the DOS prompt for cgminer for your gridseeds or bitfury might work on the BAT file directly but don't have 1 on bfgminer 4.4.0 which I somehow got from multiminer cuz of the antminers I grabbed to start mining.
juggawest thanks for the tip!
thinking about picking up two of these from you guys to save money. What all do they come with? Also if i connected the built in USB hubs to another USB hub then that hub into 1 RPI (1 pie for 2 miners) would there be any efficiency loss in regards to mining?
***** They come with built in (4 port) usb hub, 5 x usb mini data cable, a free raspberry pi (if you buy two miners) and a raspberry pi power cable so you can power the raspberry pi from the miner itself. We have just received new stock yesterday so offer immediate shipping via DHL (who are the best in my honest opinion).
thanks for the info!
Eyeboot i tried to download the software for the RPI using your link and my anti-virus blocked it. Is that normal? i went ahead and downloaded it, but it doesnt look like a image file, it looks like a program to install on the PC.
***** Hi, it is a zip file but inside there is a raspberry pi image file. I just checked it is still the same file. Virus scanners always flag cgminer as a virus so that is probably why you are getting an alert. It is not a virus though.
Here is the download link:
www.mediafire.com/download/j214ddj9l9n4tyj/RaspberryPi_Rockminer_Rocket_V1.3.0_192.168.1.254.zip
Alternative download link:
sourceforge.net/projects/rockminer/files/RaspberryPi_Rockminer_Rocket_V1.3.0_192.168.1.254.zip/download
awesome thanks!
hi after you remove the cable for the internet you put in your router?
it is connect via ethernet cable or wireless if you set that up
I would not say your true average is 510 GHS after 2 hours and 22 minutes of mining. If you pause the video at time stamp 17:09, you can see that the GHS for the past 5 seconds is 510. BUT, for the past 15 minutes it's 477 GHS, and for the total time it's 475 GHS.
I know that when you start up miners, they starts off slow because they are dialing in the difficulty setting (which will make it run slower the first hour than the second hour), but to only point out the "past 5 second average number" isn't really fair either because that number can fluctuate quite a bit as the miner requests new work, or it's working on the new work.
A more fair way to report the mining speed of this unit is to let it run for a couple of hours (like you did) but then report the past 15 minute average number (477).
I'd say after running for 2 hours and 22 minutes, that miner is mining at 477 GHS.
Yes that is correct, the speed for these devices does range from 475 to 520. I will post some more videos soon showing better performing miners. The video was made in a rush before i went on holiday : )
Dear eyeboot team,
You gave a link to dowload the image (Version 1.3.0) for Rasp Pi, but the link does not work at all. Could you upload to another server
tấn sỹ huỳnh I just tried the link and it still works. Maybe you can try this alternative download link here:
sourceforge.net/projects/rockminer/files/RaspberryPi_Rockminer_Rocket_V1.3.0_192.168.1.254.zip/download
or
pan.baidu.com/s/11tnJ4
Can the software be used via wlan?
TheJack97HD Yes it can.
how much money u make each day with that thing ? (lets say with 0 electrisity fee)
depends on which coin you mine and the current btc/usd exchange rate
How do you set the thing up without a raspberry pi. I was told I could do that, but I have no files that came with the thing. No instructions! No nothing!
Guadalupe Alvarado Both the R3 and the R4 can be connected directly to the computer and run on cgminer and Windows. All files and setup guides are available on our website: www.eyeboot.com
Here is the cgminer download link:
www.dropbox.com/s/y64lh5ucodfwyvr/cgminer-4.5.0-windows.rar
The setup guide for R3 and R4 is the same. Here is a written setup guide:
www.eyeboot.com/how-to-setup-rockminer-r3-r4-bitcoin-miner-using-cgminer.html
What is the name of the power cable to power up the Raspberry Pi directly from the R3 miner and where to find it? Can we connect 2 R3 miners to a single Raspberry Pi? Can the Raspberry Pi handle them both?
Will D MCU to Raspberry pi line. We have them at Eyeboot. If you want an extra one then you can buy them, just email sales@eyeboot.com
it is basicly a rocket box
yes....yes it is
What are the Login and Password for the Raspberry Pi? I downloaded your particular image file using the link on eyeboot.com to run the R3 miner, but they are nowhere to be found. They are not the old ones: pi and 123456. What is the easiest way to set up a WIFI on the Raspberry Pi for running the R3?
ID:root
pass word:rockminer
How to setup wifi:
www.maketecheasier.com/setup-wifi-on-raspberry-pi/
Raspberry Pi Model B+ (new version with 4 usb ports) Mini Computer/Mining Controller, Buy here now:
Eyeboot (Cheaper)
www.eyeboot.com/Bitcoin-miner-Accessories/raspberry-pi-model-b-plus
Ebay
r.ebay.com/qqkVFR