Just got them then watched this video. I did not know they came with a warranty! Might as well. I paid $80 for these from the dealership. I know where I'll go if one starts acting up!
@@michael5743 no idea, should be fine. I had one fall off on the Nurburgring and the other fell apart when I took it off. My advice, don't track them and to remove them, that the wheel off and poke out from the back
It's a cool mod if it's for the right car it's not made for anything less than a BMW 7 Series in my opinion they're a luxury feature that's supposed to imitate Rolls-Royce don't look right on a sports car I have floater caps that look amazing for my Jaguar xjl portfolio because it's an Ultra Luxury car but I don't have them on my Jaguar xkr because that's more of a sports car. caps should spend with the rims on sports cars but that's just my opinion
Hi Ben, I bought the floating wheel centres for my Z4, but I’ve not been able to see them whilst driving, could you do a film clip on your M3 of the floating wheel centres so I can see them working. I do like the wheel spacers, but I luv the gloss black grills, I would luv to fit some black grills to my white Z4, do you have any idea what type would look cool on the front of my Zed?
I have some front grills on my Z4 that have a hammered bronze like finish on the chrome and anthracite for the slats. The outside chrome and the slats come apart pretty easily for painting. Wish we could post pics in comments.
That ticking on your car before you turnt it off is nothing its just the hydraulic lifters its just because you have been reving it up well just drive her normal for a bit and it will go away there bulletproof . Cool spinners 👍
I’m personally not a fan. My OCD is on 10. BMW’s leave the factory with all the M’s lined up and the locking nut with the valve. Once you see how clean this looks it ruins your life and you find yourself checking others when out and about🤦🏻♂️. If you see one all lined up properly you know they are a car guy/girl.
Yes that's a cool mod but what about buyers from other areas? Can you not just send in the bad one for a replacement? Uh oh they don't have them for Z4s. Ugh.
If you are going to spend that much money atleast line them up with the valve,///M logo and Locking nut😊 or can you not do that? This would do my nut in if not lol
You wasted your money .To mark the 50th anniversary of the BMW M brand, the German automaker will not only introduce a series of limited edition models, but also a new roundel inspired by the classic “BMW Motorsport” logo. Our article from yesterdayfocused exclusively on the European market, but as always, the U.S. customers will have a different choice. According to BMW of North America, all the BMW M models (M3, M4, X3 M, X4 M, X5 M and X6 M), with a production date from March 2022, will have their vehicle’s front, rear and wheel hubs adorned with by this classic roundel logo.
Maybe if I was back in high school but as an adult uh really......Sorry man but it looks a little lame and gimicky.......I wouldn't put those on my car if you gave them to me for free.
Took my X5 in for a recall today, saw these spinners on the show room display cabinet, tomorrow they will be on the car.... Yes!!!
Great choice 🙌🏼
Its a really cool mod and very affordable highly recommend it. i seen one driving around with that
I think it's a great mod. I did my 7series with them after having my wheels refurbished.
Nice! I ordered a set before lock-down. Still deciding now if the cost still makes sense.
I rate them. Mad how such a small change makes a big difference
This m3 is just getting better and better. 😅 love what you’ve done with it. Great video’s 👍
Thank you 😁
Just got them then watched this video. I did not know they came with a warranty! Might as well. I paid $80 for these from the dealership. I know where I'll go if one starts acting up!
Worth it, I had 2 sets of these
@@be1441 if you don’t mind me asking.. what would you say is the average life span for all 4 to stay working??
@@michael5743 no idea, should be fine. I had one fall off on the Nurburgring and the other fell apart when I took it off. My advice, don't track them and to remove them, that the wheel off and poke out from the back
It's a cool mod if it's for the right car it's not made for anything less than a BMW 7 Series in my opinion they're a luxury feature that's supposed to imitate Rolls-Royce don't look right on a sports car I have floater caps that look amazing for my Jaguar xjl portfolio because it's an Ultra Luxury car but I don't have them on my Jaguar xkr because that's more of a sports car. caps should spend with the rims on sports cars but that's just my opinion
Have the VW version on my GTI and I love em
Don't expect them to be as smooth as the RR center caps, but these are far less expensive. They do the trick with the right expectation.
They look even smoother than the RR ones though… plus BMW makes those too remember!
Make a loop of inverted duck tape and they’ll just pop off!!
i got some for my acura and thay work good
Hi Ben, I bought the floating wheel centres for my Z4, but I’ve not been able to see them whilst driving, could you do a film clip on your M3 of the floating wheel centres so I can see them working. I do like the wheel spacers, but I luv the gloss black grills, I would luv to fit some black grills to my white Z4, do you have any idea what type would look cool on the front of my Zed?
I have shots of the caps working in this video 👌 and ebays your best bet for grills. Mine are m4 style ones
I have some front grills on my Z4 that have a hammered bronze like finish on the chrome and anthracite for the slats. The outside chrome and the slats come apart pretty easily for painting. Wish we could post pics in comments.
I have question they can use for all sizes of wheels?
Use a trim tool Ben, I did.. they are fun ,who cares if they are sensible....
Do these fit an e36? Or are they only 2012-2021? :(
Not sure tbh. I think these were 68mm? As long as your wheel has that diameter centre cap you’ll be fine. I think they’ll fit
Hi, do they have them in black?
If they come in black I will consider buying them!
That ticking on your car before you turnt it off is nothing its just the hydraulic lifters its just because you have been reving it up well just drive her normal for a bit and it will go away there bulletproof . Cool spinners 👍
Can’t part with £80 for them but I do like them.
Are they really for any bmw?
Car’s looking sick mate! Maybe a pointless mod but fantastic for anyone with OCD, I am tempted to be fair but wouldn’t pay much for them!
Cheers pal 😁
What have you done with your plates? If you can easily take them off what do you hold them on with? Thanks
I never run a front plate. Just have one in the boot just incase. Been told off by the police 3 times now tho 🙄
Bmw love having them cars back in dtm 2012
Caps look nice but pretty expensive and wouldn’t want to bother with the warranty and leaving my car just for them to replace a buggy one
I have these but the front ones don't fit in as there is a piece of metal sticking out that blocks the weight?
Pretty sure mine aren't like that. Make use of the 2 year warranty bud
@@be1441 The metal bit is on the car, like off the brake or something, not the center cap.
@@Merciuh found this on my E86, have you found a solution by any chance?
@@tenan757 Mine is also an E86 mate and haven't had chance to have a look, just have standard center caps on the front at the minute
@@Merciuh ah nice one, by looking at it, it seems a 2-5mm spacer should do the trick but not 100% sure
I’m personally not a fan. My OCD is on 10. BMW’s leave the factory with all the M’s lined up and the locking nut with the valve. Once you see how clean this looks it ruins your life and you find yourself checking others when out and about🤦🏻♂️. If you see one all lined up properly you know they are a car guy/girl.
Works with z4 e86?
I've seen them on a e68 with csl wheels
are these orignal from BMW WHATS THE COST
Bmw genuine part. Link in the description
Cash
Yes that's a cool mod but what about buyers from other areas? Can you not just send in the bad one for a replacement?
Uh oh they don't have them for Z4s. Ugh.
I have a z4 on 20 inch rims, I just installed these
Very cool 😎👌
Cool asl
Naff mate
Top 😍
Definitely needs a front lip.
Soon
If you are going to spend that much money atleast line them up with the valve,///M logo and Locking nut😊 or can you not do that? This would do my nut in if not lol
But there levelling centre caps 🤔
You wasted your money .To mark the 50th anniversary of the BMW M brand, the German automaker will not only introduce a series of limited edition models, but also a new roundel inspired by the classic “BMW Motorsport” logo. Our article from yesterdayfocused exclusively on the European market, but as always, the U.S. customers will have a different choice. According to BMW of North America, all the BMW M models (M3, M4, X3 M, X4 M, X5 M and X6 M), with a production date from March 2022, will have their vehicle’s front, rear and wheel hubs adorned with by this classic roundel logo.
Errrrm ok
Maybe if I was back in high school but as an adult uh really......Sorry man but it looks a little lame and gimicky.......I wouldn't put those on my car if you gave them to me for free.
Lovely stuff, keep the mods coming Ben plz & thank u
Will do 👌