I thought your eyes were going to pop out of your head for a minute.😂You don't like VIM by any chance,do ya. Good video. I have tried a few other options, but have not found anything that really works for me. I do a lot of different things in my shop( personal ) stuff, so I have a lot of different types of tools. I like the idea of customizing these to my needs. I have probably spent what these cost on all the stuff that DID'NT work. I am going to seriously look into this system. Thanks. Oh by the way - how do you like this system?
Decided to look into these checked around seen where our Advance store carried the jobber pack but my lord it was way higher than Amazon but I found it on another tool site cheaper than both. Thanks for doing the video on these.
I've watched this twice now and for good reason I need to upgrade and organize my whole box, I use mostly 3/8&1/4 dr but I could definitely use a couple of those bit holders and swap out the 1/2 pegs I only use 1/2 drive rearly
I have that issue with the VIM mag rails. The posts are plastic and I have quite a few broken posts. Not a big issue since the magnet is so strong. Plus replacement posts are pretty cheap
I wish they would of worked out a special with a link through your channel. Your recommendation will result in people buying them and they will benifit from this.
I use non magnetic ones, because of the magnetic rails being able to collect metal shavings and its hard to clean off. sure they rattle, if they're easy to clean.
@@flatratemaster You've got to elevate your game FRM. In the immortal words of Ric Flare: "If you want to be the best you've got to beat the best." You want to take on Billy Mays (Rest in Peace) you've got to take him down.
I been using the gear wrench rails with the ball detent and I like them for what they are but I added a wall control peg board to my huskeyand the pegs are not so good so I might get a set of vim mag rails for the sockets I use daily.
Vim Products MR16JP Magrail 16" Jobber Pack, 10Piece
amzn.to/3e0YdVg
Was hoping you had a deal where we’d help you out and get 10% off somehow.
Link doesn't work
I thought your eyes were going to pop out of your head for a minute.😂You don't like VIM by any chance,do ya. Good video. I have tried a few other options, but have not found anything that really works for me. I do a lot of different things in my shop( personal ) stuff, so I have a lot of different types of tools. I like the idea of customizing these to my needs. I have probably spent what these cost on all the stuff that DID'NT work. I am going to seriously look into this system. Thanks. Oh by the way - how do you like this system?
As pricey as these are, I guess if Snap On sold them they’d be $649 on sale.
Someone’s been tapping into the Luber Goober’s Bang.
🤣🤣
I was gonna give it a like, but you never said, “BUT WAIT! THERES MORE!” Lol
Decided to look into these checked around seen where our Advance store carried the jobber pack but my lord it was way higher than Amazon but I found it on another tool site cheaper than both.
Thanks for doing the video on these.
Flat Rate Kilmer!
Holy Jeez, Flat Rate Master, never seen you so worked up - you must be getting your coffee from the same place Scotty Kilmer gets his!
LOL Billy Mays impression! I love it
I've watched this twice now and for good reason I need to upgrade and organize my whole box, I use mostly 3/8&1/4 dr but I could definitely use a couple of those bit holders and swap out the 1/2 pegs I only use 1/2 drive rearly
Those mag holders look decent. The problem with plastic post socket holders I own is they tend to break over time, especially the thin 1/4" drive.
I have that issue with the VIM mag rails. The posts are plastic and I have quite a few broken posts. Not a big issue since the magnet is so strong. Plus replacement posts are pretty cheap
Shit I thoight around 80 100 bucks
200! Gosh dam
“A second package available for an additional charge”. Awesome comment.
I wish they would of worked out a special with a link through your channel. Your recommendation will result in people buying them and they will benifit from this.
If they would, i would
Thanks for the video Michael!
Sure you didn’t do a few rails before this video?
I like using the magnets that come on the bottom of snapon plastic socket trays
I use non magnetic ones, because of the magnetic rails being able to collect metal shavings and its hard to clean off. sure they rattle, if they're easy to clean.
BUT WAIT, THERE'S MORE!
Would you just look 👀 at that...
Luber goober has started selling tools !
WTF! I laughed coffee all over my monitor for the first 46 seconds. Well done sir! :)
You could be a tool salesman
Lol, but no thanks
Yea they are pricey..200 for the jobber pack
I warned you
Love me VIM mag rails.
They will stick to anything ferrous Not anything metal.
True, but it would take me like 20 takes to say ferrous correctly ;)
@@flatratemaster You've got to elevate your game FRM. In the immortal words of Ric Flare: "If you want to be the best you've got to beat the best." You want to take on Billy Mays (Rest in Peace) you've got to take him down.
🤣🤣🤣
WOOOOO!
@@txta786 I knew I forgot something. Obviously the WOOOOO!
I been using the gear wrench rails with the ball detent and I like them for what they are but I added a wall control peg board to my huskeyand the pegs are not so good so I might get a set of vim mag rails for the sockets I use daily.
I've never used anything made by VIM Tools before.
#notasponsor they do have some really good tools
I got some type of adhesive foam tape on mine, I got mine when they first came out, they didn't come with a pin. They were 25 a piece back then.
Tool video WWE style. I was waiting for, "but wait... there's more". That was a good bit.
I cut that line, didn't work out the way i wanted
I plan on getting these at some point but slow down on the Bang. Lol
Tooltopia sells them with out the pegs
Love VIM!
You must have sat on something really pointy before you shot this video.
Damn!! I been wanting something like this
😂🤣😂🤣 Sell them MagRails
have you tried the the doublewide magrails as a wrench organizer? thanks for sharing!!!
I haven't yet
Awesome work 👍
LMAO great video keep them coming.
Lol how many monster energy drinks did you have before this video
Cool😎
How easy are they to clean
That was a question
Remove sockets/ pull it off drawer spray with brake clean done
To much BANG LOL
Miguel P bro that was straight coke or meth 😂
Just coke zero
You scared me flat rate master 😡😡😡😡😡😡😡😡😡😡😡😡😡😡😡
😅
Had me riveted from the start
Lol how many monster energy drinks did you have before this video
Lol, none