Would it be better to cut groves into the corers so that the ply wood you are adding can interlock with the existing corner? I just know that joints cannot hold a lot of sheer stress as it.
Que tremenda habilidad del Sr. que lo realiza, presumo que las láminas de terciado antes de colocar el pegamento las habrá humedecido para poder hacer ese medio círculo?, yo trate de hacer un círculo con un terciado escolar de 4 o 5 mm y se me quebró, el diámetro era de 200 mm y tuve que cortar trozos de 30 mm para poder hacer el círculo
I suppose with another board on each side creating a creating a place for him to be locked in they would probably set up in the glue until you can take the one x's off
I think the exterior layer/outside is just there to support the curve in place while it dries, they remove that exterior after it cures and it will look flush
There is a difference between a builder and a craftsman. This one is a craftsman.
My thoughts exactly
Whats an example of a builder?
That corner will never break
But you will be able to slide it all out
I was glued together.. @@aetorres7422
@@aetorres7422 doubt it, bet they’ll put a top on it to seal it in
@@aetorres7422не вытащишь, приклеют
@@aetorres7422the steps upside down and this is the bottom step so no you won’t
凄いアィディアですね🎉久々にこんな素晴らしい木工技術を見ました。有難う御座います。
Рояль так и делают !!! Уже 300 лет.
That corner is going to be the strongest point of the bed nice work dude
Мастер ! Чувак, это ты😂😂😂
Excellent. Thanks for the trick. 😉👍
There’s a different between regular plywood versus bending board plywood ., he’s using bending board plywood!!
Wow, that stable!!! Incredible stable!!! 😮👍👍👍👍
Was hoping it was a cool looking pool table
Nice technique. Better than a kerf curve.
Semmaaaa...great work...pls use a glove....
Fits like a glove, so satisfying ❤
ด้านนอกไม่ได้เป็นช่องว่างแบบนี้ในขั้นตอนสุดท้าย แผ่นไม้ด้านนอกที่เห็นนั้น ใช้สำหรับล็อคแผ่นไม้ให้โค้งงอและได้รูปทรง เมื่อกาวที่มุมแห้ง จึงถอดถอนไม้ด้านนอกออก และทุกอย่างจะราบเรียบเสมอกันสวยงาม
Great idea
Sangat luar biasa,
Apakah ada trik lagi jika permukaan yang harus rata adalah disisi luar sudut..?
This is awesome. Never thought of this
So genius Artist Craft man
This actually pretty genius
Would it be better to cut groves into the corers so that the ply wood you are adding can interlock with the existing corner?
I just know that joints cannot hold a lot of sheer stress as it.
What about the outside?
Repeat process
@bhupendrakumar7290 How? It either has to be nailed or clamped with glue but I wish they showed us how they finished the outside.
Good work 👏 perfect talent 👍
What about the outer edge? Would have loved to watch finishing complete curved corner!!!
That’s cool!!!!
Всё верно! Я почти так же делаю!😊
This guy is obviously a master and there is people here thinking they are teaching him anything 😂
If he’s truly a master then he can still learn.
Good idea.
Nice trick
No lo había pensado gracias por iluminarnos.
Bien hecho 👌👋
Toll gemacht 👍
🔥🔥🔥🔥🔥👌
This is nice but why not just make kerf cuts? 12 slits is all it takes😊
What's your trick to not have the glue not just scrape off when installing the piece? There is no glue build-up on the top.
The glue needs to be on both pieces. This is essential for a good bond when sliding 2 pieces together with 0 clearance.
Let the glue dry for a few minutes.
Nice work
واقعا ایده ها در یوتیوب بینظیر است من همیشه برای یادگیری اماده هستم
Hi, what thicknesses are you using? 4 or 6mm?
6mm
Is that a pool table?
ขนาดทำเเล้วยังใช้เเอ๊ปเเต่ง😊
Show the outside of the corner being finished.
Brillante!
As you go in....each piece will need to be about an 1/8" shorter
Que tremenda habilidad del Sr. que lo realiza, presumo que las láminas de terciado antes de colocar el pegamento las habrá humedecido para poder hacer ese medio círculo?, yo trate de hacer un círculo con un terciado escolar de 4 o 5 mm y se me quebró, el diámetro era de 200 mm y tuve que cortar trozos de 30 mm para poder hacer el círculo
Very nice
So relaxing to watch
В СССР был шкаф у матери там была фанера согнутая в ящиках выдвижных под 90 градусов
I though was a pool table at first until inread the description.
What about the raw plywood edge?
Ідеально,не треба форма щоб сформувати радуіс,все геніальне як завжди просто.
How to curve sunmica at lessser angles?
❤ bravo
How do you get the plywood to bend like that
You can buy it like that
Thought you were making a pool table tbh
Wow!❤
いつになったら完成するの？
That's very cool.
How will I know what will be the exact length of that curve? Anyone please, thank you?
Perfect choice
I suppose with another board on each side creating a creating a place for him to be locked in they would probably set up in the glue until you can take the one x's off
Awesome
Whoever came up with that idea should get a beer.
Why didn’t you glue the edges of the first piece of corner? This looks good on the inside but the outside looks like it’s missing a piece
I think the exterior layer/outside is just there to support the curve in place while it dries, they remove that exterior after it cures and it will look flush
Excellent
What about the outer edge?
Good luck dismantling the bed frame 😅
I would like to see the outside of the corner done that way too
The corner consists of those 3-4pcs. The outside Is not outside, 😅 the space is formed cause those two planks used as "holders"?!?! 😊 IMO
If you look at the bottom piece of plywood those two outer pieces of plywood are supposed to be there they just haven't finished the corner yet
amazing
Buena idea!
Concrete form?
Pool table?
Impressive 👍
goooooooood
Bahar k taraf se kaisa round karoge
good👍🏻
Superb
Good one❤
なんて精密なお仕事なんだろう🎉
Add in between each would have strengthen lot better
Making multi layer plywood as he goes.
Genius Dude!
Bravo, c'est superbe 👍🏻
Brilliant
素晴らしい技術
Nice! Sometimes someone shows you something.
Хорошо придумал.
What about the outside of the corner?
That is the outside corner those lieces are there to just hold the plyweood till it dires then the will be removed
good job
बाहर से लेवल कैसे होगा।
Very cool
Wow muy bien , pero como se resuelve la parte más importante: la de afuera
Con una madera parecida y con muchos clavos?
It's just a jig to create curved plywood. You take them out once cured
Put glue in between each piece
Nice work 👍
Pool table build !!??
Self-jigging assembly. Nice. Efficient.
सबसे थर्ड क्लास में थर्ड क्लास होती है फ्लैक्सिबल प्लाई
Smartest
Should be use hand safety gloves 🧤
Clever
чиройли боллар бойдок утип кетсинми углинг борми саниям
Plywood made from plywood
Почему никогда никто не одевает перчатки?
От клея скоро руки растрескаются
Easy......when you know the proper measurements