Two Servos SG90 on Betaflight 3.2 or Cleanflight. Как подключить две серво в конфигураторе

How to connect 2 servo in configurator Betaflight or Cleanflight on SP Racing F3 with CHANNEL_FORWARDING.
⚑ CLI commands:
resource MOTOR 5 NONE
resource MOTOR 6 NONE
resource SERVO 1 B08
resource SERVO 2 B09
set channel_forwarding_start = 7
save
⚑ Next Video: Connect Two Servo's and CHANNEL_FORWARDING on Betaflight or Cleanflight ➥ • 🛠 Connect Two Servo's ...
-
Как подключить одновременно два серво к контроллеру SP Racing F3 в конфигураторе Betaflight или Cleanflight.
Video URL: • Two Servos SG90 on Bet...
⚑ SUPPORT CHANNEL:
❄ PayPal: ➥ paypal.me/xvoland
❄ Patreon: ➥ / xvoland
⚑ BUY ON ALIEXPRESS:
❄ FS-iA6 FS-iA6B Receiver ➥ s.click.aliexpress.com/e/ieAiyb6
❄ SP Pro Racing F3 Flight Controller Board ➥ s.click.aliexpress.com/e/7Qne6uf
❄ Receiver RC832 ➥ s.click.aliexpress.com/e/BYbuF27
❄ MW OSD:
➥ s.click.aliexpress.com/e/RF2Nrj6
➥ s.click.aliexpress.com/e/VRbaa6q
❄ TTL-USB UART CH340/CH340g ➥ s.click.aliexpress.com/e/fuR7uJM
❄ Eachine FPV Boscam 5.8G 600mW 32CH Wireless Transmitter Receiver TS832 RC832 ➥ s.click.aliexpress.com/e/a2NvbII
❄ Power Distribution Board ➥ s.click.aliexpress.com/e/7uzNj6i
⚑ Buy on BAGGOOD:
❄ Flysky 2.4G 6CH FS-iA6B Receiver ➥ goo.gl/FkNwVh
❄ Flysky FS-A8S FS A8S 2.4G 8CH Mini Receiver ➥ goo.gl/MtAKMf
❄ FlySky FS-i6 2.4G 6CH AFHDS Transmitter+FS-iA6 Receiver ➥ goo.gl/fU23d1
❄ FlySky FS-i6 2.4G 6CH AFHDS Transmitter+FS-iA6B Receiver ➥ goo.gl/ZjMzoc
goo.gl/yzxzir
❄ Antenna Pagoda v2
➥ Emax goo.gl/mJCRB9
➥ Realacc goo.gl/VhFHQT
➥ GEPRC goo.gl/w4JB7Y
➥ goo.gl/phKbWJ
❄ TTL-UART USB Serial Adapter CH340G 5V/3.3V ➥ goo.gl/NBwX4r
❄ 1x TowerPro SG90 Mini Gear Micro ➥ goo.gl/oQdAoU
❄ 4x TowerPro SG90 Mini Gear Micro ➥ goo.gl/PCQVJm
⚑ Note: Some of these links have an affiliate code, if you purchase with these links you will be supporting me and these videos at no extra cost. Thank you!
♫ Music: SIINCERITY - Stranded
© For copyright issues, please mail me

[@GibsonLesPaul2273]

Thank you , perfect.

[@xVoLAnD]

*Two Servos SG90 on Betaflight 3.2 or Cleanflight.*
*Как подключить две серво в конфигураторе. Русские субтитры*
Default settings:
# resource
resource BEEPER 1 C15
resource MOTOR 1 A06
resource MOTOR 2 A07
resource MOTOR 3 A11
resource MOTOR 4 A12
resource MOTOR 5 B08
resource MOTOR 6 B09
resource MOTOR 7 A02
resource MOTOR 8 A03
resource PPM 1 A00
resource PWM 1 A00
resource PWM 2 A01
resource PWM 3 B11
resource PWM 4 B10
resource PWM 5 B04
resource PWM 6 B05
resource PWM 7 B00
resource PWM 8 B01
resource SONAR_TRIGGER 1 B00
resource SONAR_ECHO 1 B01
resource LED_STRIP 1 A08
resource SERIAL_TX 1 A09
resource SERIAL_TX 2 A14
resource SERIAL_TX 3 B10
resource SERIAL_TX 11 B05
resource SERIAL_TX 12 B01
resource SERIAL_RX 1 A10
resource SERIAL_RX 2 A15
resource SERIAL_RX 3 B11
resource SERIAL_RX 11 B04
resource SERIAL_RX 12 B00
resource I2C_SCL 1 B06
resource I2C_SDA 1 B07
resource LED 1 B03
resource SPI_SCK 2 B13
resource SPI_MISO 2 B14
resource SPI_MOSI 2 B15
resource ESCSERIAL 1 A00
resource ADC_BATT 1 A04
resource ADC_RSSI 1 B02
resource ADC_CURR 1 A05

[@mossadsamaha4952]

Thank you.
I want to connect 5 servos with f3 flight controller and let them moving based on accelerometer and gyro

[@alvarahman211]

hellow,
could u pls help me configuring how I can control a servo from my flight controller using the CleanFlight & FlySky radio ?

[@xVoLAnD]

Alva Rahman Yes, your can. After the New Year, in the first days, I’ll show the complete configuration of my drone

[@xVoLAnD]

Hello, this is additional video about connection two servos in Betaflight ruclips.net/video/n_rtH64IfU0/видео.html

[@RC-ij4je]

Remove props, please. They are dangerous on the bench.