No, Its Not Correct Answer And You Did Not Ask Any Questions, You Are Doing Everything Wrong In This Video :D 9 Volts For Your Surface Area Is Overkill 10 Folds And You Did Nott use Copper METAL As Anode :D @@dkstudento
Bro you are so wrong... The anode should be made with copper substance (copper rod)and the cathode should be the metal which needs to be coated..... Even though you added copper sulphate the reaction will not work properly since when the copper sulphate will turn into copper and it will be coated on the cathode For the remaining reaction the iron from the anode will dissolve in the electrolyte and thus iron will be coated on the cathode( iron blade).....
You are telling about electrolysis of copper sulphate, but I demonstrate only Electroplating (Copper polishing) like iron nails . But I use blades in place of iron nails. I trying to show Electroplating not electrolysis here.
@@dkstudentoNot at all, iron was deposited. You need to use copper rod or any copper metal item at the cathode for it to work. This was just electrolysis
This Is Wrong, You Just Deposited Some Loose Mettal paricales Onto The Blade, The Anode Needs To Be The Metal You Want To Strip The Metal From, It Should Be Copper If You Copper Plate, The 9 Volt Battery Got Me Fucked Up :D You Should Use Not More Then 1 Amp And Around 3 -5 Voltws For Your Setup, But Thats Not Setup, Its Just Foolishness, I Hope People DOnt Learn From This WRONG VIDEO !
This is because when pure copper metal is connected as cathode and the metal that is to be electroplated is connected as anode, the charges from the cathode carry Cu2+ ions and migrate towards the anode, where the metal to be electroplated is attached, and deposit on that and gives a copper layer on it.hope this helps😁
Bro!!!!! This is electrolysis, not electroplating. You should take a copper bar as Anode in the place of blade.
Oo
Please tell me the correct method of electrolysis, I have practical board exam the day before yesterday and I don't know anything. 🥺
@AlishaSheikh-xc8lw Video that is you watch is best for Electrolysis.
@@dkstudento thankyou✨
@AlishaSheikh-xc8lw Welcome
Demonstration of electrolysis of copper sulphate salt
Correct answer 💯
No, Its Not Correct Answer And You Did Not Ask Any Questions, You Are Doing Everything Wrong In This Video :D
9 Volts For Your Surface Area Is Overkill 10 Folds And You Did Nott use Copper METAL As Anode :D @@dkstudento
Nice activity
Thanks
Wow
Thanks Pavlo
❤
Great explaination
Thanks
Well done
Thanks
Bro you are so wrong...
The anode should be made with copper substance (copper rod)and the cathode should be the metal which needs to be coated.....
Even though you added copper sulphate the reaction will not work properly since when the copper sulphate will turn into copper and it will be coated on the cathode
For the remaining reaction the iron from the anode will dissolve in the electrolyte and thus iron will be coated on the cathode( iron blade).....
You are telling about electrolysis of copper sulphate, but I demonstrate only Electroplating (Copper polishing) like iron nails . But I use blades in place of iron nails. I trying to show Electroplating not electrolysis here.
It is electrolysis not electroplating
😂😂😂go and revise this topic one more time
@@fazla2044
@@dkstudentono this is not the method of electroplating
But how? Can you explain me
Can you please tell me how long it takes because I have to present it tommorow
It's takes just 1 to 2 minutes unless Copper sulphate will dissolved in water in excess.
The title literally says “Electroplating of Copper”. Dude, where is the copper??! + rating of -10/100 for the background music.
You can see, copper metal deposited on Blade used inside the solution.
@@dkstudentoNot at all, iron was deposited. You need to use copper rod or any copper metal item at the cathode for it to work. This was just electrolysis
How the coin pushes the needle over it? What is the chemical being used?
No coin is used in this video.
Copper sulphate solution is used in this video.
Isse brass ko bhi oxidised kr skte hai kya rusty colour me
No idea about brass to oxidised.
we can use pencils instead of blades
Yah you can use it
Nice bro
Thanks
Is wire separate from bettery
Yah, wire and wire clips with in the parsal
The cathode was on the left side ;)
thanks
I think this is Electrolysis not Electroplating.
Ok thanks
Bro where is pure metal obtained at cathode or at anode 😅
Copper deposited at cathode which is connected to negative terminal of battery.
Itna fast hota hai pta nhi tha
It's due to video speed
Bettery name please
9V HW battery, You can purchase on Amazon or near Electronic shop.
Where is the copper dude😮
Cooper deposited on Blade, you can see it last time in the video
Bro why u answering every comment
Why are you asking this?
Where did the sulfur go?
Sulphur is suspended in rest solution.
Bruh where’s the copper anode?😂😂
None Copper electrode is required in Electroplating Bro .
Can I purchase from draz
No Idea, you can check on it
@@dkstudento ok thank you so much 😊
how much time it has taken
Approx 60 sec to 100 second
thanks beacuase of you i can create this
@@dkstudento
@user-yh4hb8vb3r welcome
Whats the use of the annoying music
Music is just support for video
This Isn't ElectroplatingAt All
Then what is ? Can you explain please?
Negetive electrode is called Anode and positive electrode is called cathode !
U have shown wrong bruh..💀👍but it helps, thanx💜🤍
Welcome
No ,negative electrode is called Cathode and positive electrode Anode. Check on google.
you're wrong
anode is positive and cathode is negative, wth are you talking about??
Bro you don't know yourself and tryna teach this poor guy
This Is Wrong, You Just Deposited Some Loose Mettal paricales Onto The Blade, The Anode Needs To Be The Metal You Want To Strip The Metal From, It Should Be Copper If You Copper Plate, The 9 Volt Battery Got Me Fucked Up :D
You Should Use Not More Then 1 Amp And Around 3 -5 Voltws For Your Setup, But Thats Not Setup, Its Just Foolishness, I Hope People DOnt Learn From This WRONG VIDEO !
This is wrong ! This isn't electroplating... This is electrolysis of CuSO4
Can you explain, How Electroplating is differ from Electrolysis ?
This is because when pure copper metal is connected as cathode and the metal that is to be electroplated is connected as anode, the charges from the cathode carry Cu2+ ions and migrate towards the anode, where the metal to be electroplated is attached, and deposit on that and gives a copper layer on it.hope this helps😁
You're creating confusion in students
But how do you think about it 🤔
So what?
woopie fkin do!
?