Mike, you plano keep it simple, with time tested knowledge. I have been building hotords and bikes for over 50 years and Mike is the voice of experiaance. Thank you Mike for taking the time to do your videos man.
Pacific Mike covers all the technical assembly of engine parts, and then a whole video on gaskets and sealants. Thank you again Mike for all that you do...your legacy will go on for a long time...you have the soul of a teacher. 😎
Thank you for all the time and effort you put into making your videos easy to understand for your average guy. I recently purchased a 1982 FXS low rider. I watch you for what ever I need when working on my Shovel head. Thanks again you take care and stay safe.
Mike is the best and cleanest working teacher. I have been learning from this man for a couple years now and I must say that my shovelhead is much better now the I have the confidence to tackle the job at hand. If I need any references to complete it I look up mikes video covering that particular project.thanks Mike for the wealth of teaching you cataloged in all your videos.
Mike, your videos have been timely as I breath life into an old shovel. Just started re-assembly of trans and motor. Time to run and get some white lithium grease. Thank You
I must say I couldn’t watch your videos for a while. Doctor told me yesterday how close I was to losing my leg and arm. I’m no longer riding. It is a love of mine but I can’t take the risk. If I get hurt again that’s it for my leg. It’s metal from hip to ankle. I go home today but won’t walk for at least 6 more weeks. Still can’t use my left arm much and that will be my normal until, the bones heal. It’s mostly metal as well. The past year I have cherished your videos for your passion about motorcycles. I’ve seen a lot of most guys on the tube but to me yours are the best. Thanks mike.
This has been a service to me for sure, Mike. Thank you, wise sage. I take your tutelage to heart because I can only afford to work on my bike myself and it makes me happy to do so and I want to do things right. I got tons of great tips today and I appreciate you making this video. Stay upright and between the pipes!
I always enjoy watching your videos and find you to be humble, informative, and very pleasant in your demeanor and disposition. Thank you for making these and sharing your wisdom. - Scott
I recall that; back in the early 1970s; a lot of guys used silicone sealer on motorcycle gaskets. That stuff was meant for aquariums -- not motorcycles. I've always used Yama-bond, Three Bond and Gaskacinch (sic). Thanks Mike, for this great info!
@@pacificmike9501 -- That's for certain. I remember a pal's Sportster engine grenaded because the bike's oil galleries were clogged with silicone. Ride safe out there in CA. My wife and I lived in Santa Rosa, CA. We'd often ride to Bodega Bay, Morro Bay and Monterey. Barb (RIP)
@@pacificmike9501 ... A few years back, I helped a friend replace the starter sprag on his Yamaha V-Star 1100. During reassembly, the case gasket got folded at the front tip. Of course it notified us pretty quickly by oiling the bottom of the engine. When we popped the case cover, the culprit was readily seen. Rather than wait for a new gasket, we straightened the folds and applied a thin coating of Permatex #2 to the gasket in the area of the folds. We let it set overnight, and the next morning lit it up. Never lost a drop of oil afterward. Bike is still ridden regularly. I came up with a good combination for parts that may be pulled off and returned to the engine. I glue the gasket to the component with 3M super weatherstrip adhesive (yellow death), then use white lithium grease on the engine side. It generally allows the component to be removed without damaging the gasket. The primary components I've done this with have been on small block Chevy engines. A valve cover gasket lasts for many R&I cycles. The technique holds the gaskets on the water pump as you hold the iron unit at the front of the block and feed a bolt through. The grease allows the gasket to slide a bit against the block as you find the bolt holes. As for the container for the white lithium grease, I like the big plastic tube with the screw cap. It keeps the grease clean better than the pop top cans with the snap on plastic lids. At least, if you use the can, it's easy to see most contaminants against the white color of the grease.
Mike, your videos bring back memories of when I built bikes. Great and informative videos. Mike is a knowledgeable older mechanic (notice I didn't say OLD). Mike give you some good information.
Am with you on greasing paper gaskets...Have made many gaskets (for my obsolete good stuff, have a small ball peen to so do) and have found two things. Grease the gasket. Torque to spec. Let set overnight. Torque again. The grease will "swell" the gasket.(same for cork, allowing for multiple usage of cork gaskets, some times LOL👍) And make it easy to remove the next time...(it may "weep"...some? Especially if made from "shirt cardboard"LOL) Like the Copper spray/tube stuff...when called for...And of course, get the mating surfaces to "mate" is desirable... Really enjoy your vids! Keep up the good work!👍💪
Thank You. The different ways of doing things are always interesting. And, necessity is why we get there. Getting "creative" is the key. You, obviously, have got it down.
You brighten my day Mike,I have 6 motorcycles,I work on them some, but what I cannot do I take them to my friend who is also my mechanic.Your videos allow me to ask him intelligent questions,I doubt if I really pull it off and perhaps he humors me, but for a fleeting moment I convince myself I know way more than I do.
Thank you Mike, Very good advice and am sure it will help a lot of folk. One quick note. A lot of people use WD-40 as a lubricant on rubber. It was never intended for that use and will compromise the rubber over time. It got above 60F degrees in MN today. Yay! Ride Safe.
Good stuff! Ive been working with euro bikes for a long time. typically gaskets are dry except for the real thin ones, where there isnt much squish or they have to hang in vertically. then I typically use gasgacinch. its like a thin rubber cement. easy to clean up on disassembly. Ive always used plain motor oil for O rings. But I will definitely give lithium a try. Ive spent far too many hours cleaning RTV off gasket surfaces. Just dont. and always - when applying a gasket lube, a little goes a long way. for cleaning and prep - patience, start with the gentlest method first. Ive soaked surfaces overnight in a soap like simple green to soften the gasket residue. then I use plastic spackle applicators and scotch bright. that works about 99 percent of the time. Usually installing dry plus manufacturers torque spec keeps the fluids inside where they belong.
I too am a big fan of the white lithium grease, used it for years. As far as gasket materials I've been starting to use Foamet material on a lot of applications with good results. They're super nice for lifter blocks as well. Talking a nice nice deal and takes up voids
Another awesome video Mike . Always great information . I have always wondered what to put on gaskets and learned valuable lessons . Keep giving us your knowledge. I soak it up ..
Great video Mike, it is important to share our thoughts on gaskets and sealers as there is soooo much stuff out there. We used a lot of white lithium grease for assembly and a nice thing about it is that when disassembled in the future, there is evidence that it was used on initial inspection. Enjoyed the vid, cheers!
On gaskets I use silicone only as a last resort. And then only apply a very thing layer and rub it on the entire gasket faces, and remove all excess. The gasket only appears to be wet when I'm done. And I grimace everytime I think about it. For any Shovel that accepts them.. the factory gaskets (like primary cover and cam cover) with the blue or orange sealant stripe on it works better than all others IME. For automotive parts that seldom need to be removed(like a mechical fuel pump block off plate on engine block) there's a blue spray on type of sealant you just lightly spray the gasket with and it's sticky for holds the gasket in place too. IIRC Perma-Tex High Tack is the name of it. Over the years I find most "paper"gaskets do best installed dry. Make sure the engine surfaces are spotless too. On a car's water pump gasket I have found that wheel brg grease beats them all. Old "Cowboy" McIver taught me that one. He was a very old biker H-D mechanic, gun smith. Had a vest with sewn on patches from major bike rallies from 1946 and up. RIP Cowboy.
I always appreciate that I learn something new nearly everytime I watch your vids. Dish soap for carbs. You could say it never "DAWN"ed on me. Ok thats horrible. I'm sorry for that. Anyways thanks as always and stay safe and we'll brother
I've found I can learn something from every video you do, but the white lithium grease in the proper application is my favorite. I'll pass this one on to my children. I'll certainly tell them I learned it from Pacific Mike.
I learned it from an old mechanic one day when I couldn't get a carburetor o-ring to quit leaking. He told me "white lithium grease." I laughed at him, but he wouldn't shut up. I had the stuff for doing drum brakes. So, fine! If I tried it would he shut up? I had to apologize as I had become a believer. Tell the kids "hi."
Hylomar gasket sealer is my go too ,fuel don't touch it works excellent on intake manifolds .Hylomar was developed by Rolls Royce for intake manifolds .
As always a great,informative video!! Mike,you should have been a teacher! The sealants I use every day when I'm working on bikes. I definitely liked the dielectric grease part in there! See ya out on the road sometime thanks to you and your videos!!
Mike your gonna love this sealing tip ! On the older Harley's on the inner primary the solenoid that pulls in the starter gear and starts the bike it's always been a mofo to seal the solenoid to the inner primary. Well if you go to your local hardware store (Lowes or the like) go to the plumbing section and look for a MACK WASHER . A mack washer is the tapered washer that seales your sink drain to the drain pipe . Its a tapered ribber washer tha fits like a glove on the end of the solenoid and seals the solenoid perfectly to the inner primary and costs only $2.57. A huge step up from the piece of garbage the parts houses sell you for $10.50 foam refrigerator seal that leaks every where.. i Ill Shoot you a photo if i can . Love your videos. Charlie Little Bear
I’ve had bad luck with cheap gaskets before and now try to use the best I can. The felt pads inside the panhead rocker box is something I’ve not heard of before, thanks for that info.
Very informative in general and very interesting about the use of white lithium grease on oll pumps. BTW - all traditional greases, which are basically oils mixed with a thickening agent, are Soap-based, with the soap serving as a thickening agent.
I've got some stuff called Hylomar Blue. It is a gasket dressing developed for use on WWII Merlin engines, so when I heard about it, I just had to get a tube. You know the internet and all the information you can learn lol. I haven't tried it yet, but it should be fun.
Joined up Mike! SooooooSensible! Humorous lol. My Age..Older. I have 96 Road King 80cu in carb. second owner. Previous owner owned a bicycle shop in Wichita Took really good care of it. 28000 miles. After buying and breaking in Lee had Harley Dealer do something to the engine to help it run smoother at hi rpm and keep up with bigger motors. New cams I was told for it. I don't run it hard at all but have to say 70 or 80 comes smoothly n rides better with 2. Has air suspension from factory. It has all screaming eagle ignition pipes. Sounds very Harley I love it. My first Harley n I just turned 69. Had it for 5 years and kept reg maint new tires 20000 mile check by dealer just had 30000 done. Had handlebar rubbers replaced carb that was rebuilt twice already done again. By Phoenix Motors in Augusta Ks. Got it bk from him and rubs far better than ever. I was just wondering if you could explain how the cams helped and what my horsepower might be the way bikes set up. Thks for your lifetime if labors n willingness to pass on. A Freat Thing Thks. Greenwood Co. Ks Flint Hills.Some of the most beautiful rides in U.S.A
Hard to say horsepower. But the cam decides how far the valves open and how long it keeps them open. That was a simple answer to a complicated question. More fuel and air comes in and goes out, makes more power.
Hi Mike. Im happy to watch your seals observation and remembering last centiry when as you told, paper seal was wide used… and create a lot problem for assembly , leaking and dismounting while parts was friyed each other due high temp.you could add one or two more greases, one for hands cleaning and onother for skin protection i use sometimes in some instances. See U…
Thanks for the quick response. I might not have been clear though, I was referring to the inside of the cases where I have seen people use a red enamel. Just don't know if this is the right way to go. Thanks again.
Its a good question. Old motor builders did this a lot. It filled the porosity of the case material and didn't hold oil. The oil ran right down the sides of the case. There may be more answers out there. I welcome them.
Weight on Brother. The video is great. I wonder if the spray copper will get gaskets to stay in place while assembling bolting on parts??? Im going to use it Mike and see. How u feeling the past few weeks?? U got a cool little bike shop. Ben watching ur videos for well over a yr .
If you let the stuff dry to "tacky," then press it in place, it will probably do it. It won't support any weight though. I'm good, and hope you are too.
On my old 69FL I installed a stud and eliminated the high use exhaust flange bolt. I put some chrome acorn nuts and split locks on the studs to pull that exhaust flange up tight. Worked good, looked good. Its partly that old dissimilar metal problem and partly a bad design IMHO.
The design was fine with a one piece, properly installed exhaust headpipe. Then came dual pipes on the FX's and all of us that just had to have custom pipes. And, we used Shovelheads to learn a lot of stuff and make a lot of mistakes. Must support all exhaust systems well. Yes, it took 'til 1984 for Harley to mount exhaust systems to the heads nicely.
Mike, you plano keep it simple, with time tested knowledge. I have been building hotords and bikes for over 50 years and Mike is the voice of experiaance. Thank you Mike for taking the time to do your videos man.
Wow. Thank You.
Mike could open up a school and be successful. Instead, he graciously offers invaluable wisdom free of charge on YT. For that, I am grateful.
Wow. Thank You.
Pacific Mike covers all the technical assembly of engine parts, and then a whole video on gaskets and sealants. Thank you again Mike for all that you do...your legacy will go on for a long time...you have the soul of a teacher. 😎
Thank You
I'm amazed that this is the only thing that comes up relating to solid gaskets whatsoever when i search on RUclips. Thanks for it!
Glad to help
Thank you for all the time and effort you put into making your videos easy to understand for your average guy. I recently purchased a 1982 FXS low rider. I watch you for what ever I need when working on my Shovel head. Thanks again you take care and stay safe.
Thank You. Glad it's useful to you.
I love your no-nonsense, yet humble style. Thanks for the videos.
Glad you like them!
Mike is the best and cleanest working teacher. I have been learning from this man for a couple years now and I must say that my shovelhead is much better now the I have the confidence to tackle the job at hand. If I need any references to complete it I look up mikes video covering that particular project.thanks Mike for the wealth of teaching you cataloged in all your videos.
Wow! You and people like you make it worth it. Thank You.
Mike, your videos have been timely as I breath life into an old shovel. Just started re-assembly of trans and motor. Time to run and get some white lithium grease. Thank You
Thank You.
I must say I couldn’t watch your videos for a while. Doctor told me yesterday how close I was to losing my leg and arm. I’m no longer riding. It is a love of mine but I can’t take the risk. If I get hurt again that’s it for my leg. It’s metal from hip to ankle. I go home today but won’t walk for at least 6 more weeks. Still can’t use my left arm much and that will be my normal until, the bones heal. It’s mostly metal as well. The past year I have cherished your videos for your passion about motorcycles. I’ve seen a lot of most guys on the tube but to me yours are the best. Thanks mike.
Thank You. I must say, I enjoy seeing people do things I can't do any more. I'm glad you're alive. I wish you all the positive things.
@@pacificmike9501 thanks mike.
🙏💪🤞🤗💯❗
People who didn't know what they were doing creates more work,which is a good thing for those that do.
We just need to help each other out a little.
This has been a service to me for sure, Mike. Thank you, wise sage. I take your tutelage to heart because I can only afford to work on my bike myself and it makes me happy to do so and I want to do things right. I got tons of great tips today and I appreciate you making this video. Stay upright and between the pipes!
Wow, thank you
exactly, these videos help alot (especially with tight budget)
This video is a great reference we can all come back to. Thanks Mike!
Glad you enjoyed it!
I think i have watched every one of the shovelhead video's fantastic and a big thanks as i begin my Basket case 1976 shovel barn find chopper build
Sounds like fun to me. Hope our stuff helps.
@@pacificmike9501 for sure it has helped me get a handle on lots of things, THANKS again for sharing.
Always a treat watching and listening to an old pro. Alot of hands on experience conveyed in an enjoyable manner.
Thanks Pacific Mike.
Glad you enjoyed it
I always enjoy watching your videos and find you to be humble, informative, and very pleasant in your demeanor and disposition. Thank you for making these and sharing your wisdom. - Scott
Thank You.
Love listening to you. Calms me down!
Thank You. That's truly nice to hear.
You’re awesome
I love your input and it’s great to be able to have the opportunity to get a professionals input .
Thanks so much
Glad it was helpful!
Mike how you doing. Great to see you again and Gods blessings for you
Thank You. And backatcha.
Your knowledgeable and pleasant character made me subscribe today. Thank you for what you do and sharing your experience
Thanks and welcome
I recall that; back in the early 1970s; a lot of guys used silicone sealer on motorcycle gaskets. That stuff was meant for aquariums -- not motorcycles. I've always used Yama-bond, Three Bond and Gaskacinch (sic). Thanks Mike, for this great info!
Yep. That early stuff went in everywhere. And people put on too much.
@@pacificmike9501 -- That's for certain. I remember a pal's Sportster engine grenaded because the bike's oil galleries were clogged with silicone. Ride safe out there in CA. My wife and I lived in Santa Rosa, CA. We'd often ride to Bodega Bay, Morro Bay and Monterey. Barb (RIP)
Yes, that's some beautiful riding country. Take care.
Stoked to watch this video, I've been reading up on anerobic and other type gasket seals. I loved your white lithium grease!
Glad you enjoyed it!
You must be a mind reader... Great vid and I will be taking notes as I am in the middle of building my 77 Shovel. Thank you
Glad to help
Best part of the day is a Mike vid...bless n carry on youngster...
Thank You. Man, you gotta be old. Okay, I'll look up to you.
Thank you Mike. I love the smell of the old brown permatex. Aviation Form-A-Gasket. Clean hands with lacquer thinner .
Yep. I remember.
@@pacificmike9501 ... A few years back, I helped a friend replace the starter sprag on his Yamaha V-Star 1100. During reassembly, the case gasket got folded at the front tip. Of course it notified us pretty quickly by oiling the bottom of the engine. When we popped the case cover, the culprit was readily seen. Rather than wait for a new gasket, we straightened the folds and applied a thin coating of Permatex #2 to the gasket in the area of the folds. We let it set overnight, and the next morning lit it up. Never lost a drop of oil afterward. Bike is still ridden regularly.
I came up with a good combination for parts that may be pulled off and returned to the engine. I glue the gasket to the component with 3M super weatherstrip adhesive (yellow death), then use white lithium grease on the engine side. It generally allows the component to be removed without damaging the gasket. The primary components I've done this with have been on small block Chevy engines. A valve cover gasket lasts for many R&I cycles. The technique holds the gaskets on the water pump as you hold the iron unit at the front of the block and feed a bolt through. The grease allows the gasket to slide a bit against the block as you find the bolt holes.
As for the container for the white lithium grease, I like the big plastic tube with the screw cap. It keeps the grease clean better than the pop top cans with the snap on plastic lids. At least, if you use the can, it's easy to see most contaminants against the white color of the grease.
Mike, your videos bring back memories of when I built bikes. Great and informative videos. Mike is a knowledgeable older mechanic (notice I didn't say OLD). Mike give you some good information.
I appreciate that!
Mr Mike thank you so much for the content in your videos
You are very welcome
Am with you on greasing paper gaskets...Have made many gaskets (for my obsolete good stuff, have a small ball peen to so do) and have found two things. Grease the gasket. Torque to spec. Let set overnight. Torque again. The grease will "swell" the gasket.(same for cork, allowing for multiple usage of cork gaskets, some times LOL👍) And make it easy to remove the next time...(it may "weep"...some? Especially if made from "shirt cardboard"LOL) Like the Copper spray/tube stuff...when called for...And of course, get the mating surfaces to "mate" is desirable...
Really enjoy your vids! Keep up the good work!👍💪
Thank You. The different ways of doing things are always interesting. And, necessity is why we get there. Getting "creative" is the key. You, obviously, have got it down.
Thx Mike for taking your time for all your videos. I’m a do it yourself guy. And these videos make things so much easier on me. See you on the road!
Glad to hear it. Thank You
Hey Mike! I just wanted to say thanks for all the fantastic knowledge you're passing on,
My pleasure! Thank You
You brighten my day Mike,I have 6 motorcycles,I work on them some, but what I cannot do I take them to my friend who is also my mechanic.Your videos allow me to ask him intelligent questions,I doubt if I really pull it off and perhaps he humors me, but for a fleeting moment I convince myself I know way more than I do.
It's called "trying to speak the language." It's a mutual respect thing, and I appreciate both of you.
Thanks Mike. Checking the sealants is appreciated
Glad to help
Thank you Mike, Very good advice and am sure it will help a lot of folk. One quick note. A lot of people use WD-40 as a lubricant on rubber. It was never intended for that use and will compromise the rubber over time. It got above 60F degrees in MN today. Yay! Ride Safe.
Great point!
It probably won't because the solvent evaporates rapidly and is gone in seconds after spraying.
Always a pleasure....just a nice way to wind down the day
Thank You.
The smell of a job well done....love that.......
Thank You
Good stuff! Ive been working with euro bikes for a long time. typically gaskets are dry except for the real thin ones, where there isnt much squish or they have to hang in vertically. then I typically use gasgacinch. its like a thin rubber cement. easy to clean up on disassembly. Ive always used plain motor oil for O rings. But I will definitely give lithium a try. Ive spent far too many hours cleaning RTV off gasket surfaces. Just dont. and always - when applying a gasket lube, a little goes a long way. for cleaning and prep - patience, start with the gentlest method first. Ive soaked surfaces overnight in a soap like simple green to soften the gasket residue. then I use plastic spackle applicators and scotch bright. that works about 99 percent of the time. Usually installing dry plus manufacturers torque spec keeps the fluids inside where they belong.
You're gonna love white lithium. I was amazed. Please write back and tell me.
@@pacificmike9501 I will do!
I too am a big fan of the white lithium grease, used it for years. As far as gasket materials I've been starting to use Foamet material on a lot of applications with good results. They're super nice for lifter blocks as well. Talking a nice nice deal and takes up voids
Great point!
One of your best videos yet Pacific Mike!! Thank you for your posts!!
Glad you enjoyed it
Another awesome video Mike . Always great information . I have always wondered what to put on gaskets and learned valuable lessons . Keep giving us your knowledge. I soak it up ..
Thank You.
Great video Mike, it is important to share our thoughts on gaskets and sealers as there is soooo much stuff out there. We used a lot of white lithium grease for assembly and a nice thing about it is that when disassembled in the future, there is evidence that it was used on initial inspection. Enjoyed the vid, cheers!
Thanks for sharing
I love every minute of your videos
I love every second of your videos
Thank You
Thanks Mike for taking the time to do these. I learn something every time!!!
Glad to hear it!
Thanks Mike, very nice run down of gaskets and seals.
Thank You.
Thank you mike
You are certainly welcome.
“I don’t know what it is, all I know is it works”! Lol couldn’t have put it any better Mike. (On the lithium comment)
Thank You. I don't strive to be a chemist, but I always try to be a better wrench. That is, always better than I am.
Nicely put
On gaskets I use silicone only as a last resort. And then only apply a very thing layer and rub it on the entire gasket faces, and remove all excess. The gasket only appears to be wet when I'm done. And I grimace everytime I think about it. For any Shovel that accepts them.. the factory gaskets (like primary cover and cam cover) with the blue or orange sealant stripe on it works better than all others IME. For automotive parts that seldom need to be removed(like a mechical fuel pump block off plate on engine block) there's a blue spray on type of sealant you just lightly spray the gasket with and it's sticky for holds the gasket in place too. IIRC Perma-Tex High Tack is the name of it. Over the years I find most "paper"gaskets do best installed dry. Make sure the engine surfaces are spotless too. On a car's water pump gasket I have found that wheel brg grease beats them all. Old "Cowboy" McIver taught me that one. He was a very old biker H-D mechanic, gun smith. Had a vest with sewn on patches from major bike rallies from 1946 and up. RIP Cowboy.
Thank You.
I always appreciate that I learn something new nearly everytime I watch your vids. Dish soap for carbs. You could say it never "DAWN"ed on me. Ok thats horrible. I'm sorry for that.
Anyways thanks as always and stay safe and we'll brother
Thank You.
Hello MIKE,
Thanks for the Expertise & Recommendations
COOP
........................................
Our pleasure!
Great video thank you after seeing your videos makes me want to go and wrench on the old heritage
looking forward to the next one
Go for it!
I've found I can learn something from every video you do, but the white lithium grease in the proper application is my favorite. I'll pass this one on to my children. I'll certainly tell them I learned it from Pacific Mike.
I learned it from an old mechanic one day when I couldn't get a carburetor o-ring to quit leaking. He told me "white lithium grease." I laughed at him, but he wouldn't shut up. I had the stuff for doing drum brakes. So, fine! If I tried it would he shut up? I had to apologize as I had become a believer. Tell the kids "hi."
@@pacificmike9501 Will do! You have a great day brother.
THANK YOU...for sharing. Watched and took some facts of information with the view.
Glad you enjoyed it
Hylomar gasket sealer is my go too ,fuel don't touch it works excellent on intake manifolds .Hylomar was developed by Rolls Royce for intake manifolds .
Cool.
Thank you. Exactly the kinda content I'm looking for. Very helpful.
Glad to hear it! Thank you.
Started after Nam w/ '68 Sportster. Love your gasket video, as I do the rest. Great motorcycle, HD. Stan big island Hawaii.
Thank You. Glad you're with us.
Great information you are my go to guy for exactly this video
I appreciate that!
As always a great,informative video!! Mike,you should have been a teacher! The sealants I use every day when I'm working on bikes. I definitely liked the dielectric grease part in there! See ya out on the road sometime thanks to you and your videos!!
Thanks 👍
Mike, you are a wealth of information. Thank you for sharing!
My pleasure!
Great video Mike....my mechanic used those Jim's gaskets a day also cometic gaskets....good stuff.
Thanks 👍
Thank you for this! Just so happens I recently tore the motor down to the crank case and will soon be putting it back together!
Cool.
Ooh boy, this is a very very useful video!! Thanks for all the info!! Calm, logical and understandable 👌🏼👌🏼.
Glad it was helpful!
Thank you for sharing
Thanks for watching!
Awesome Video as usual
Thank You
Mike your gonna love this sealing tip !
On the older Harley's on the inner primary the solenoid that pulls in the starter gear and starts the bike it's always been a mofo to seal the solenoid to the inner primary. Well if you go to your local hardware store (Lowes or the like) go to the plumbing section and look for a MACK WASHER . A mack washer is the tapered washer that seales your sink drain to the drain pipe . Its a tapered ribber washer tha fits like a glove on the end of the solenoid and seals the solenoid perfectly to the inner primary and costs only $2.57. A huge step up from the piece of garbage the parts houses sell you for $10.50 foam refrigerator seal that leaks every where.. i
Ill Shoot you a photo if i can .
Love your videos.
Charlie Little Bear
Well unfortunately utibe will not let me past a photo.
I'll check at the hardware store. They did come with a foam rubber seal that I still use. But I'll check yours out.
Projects in the garage; twin cam apart . Waiting for seal hd didn’t have .😁
Much thanks always for tips . ✊👍🏻👌🙏🏻👋🏻
Thank You.
You help bikers. Which is great !
Thank You
You are great man you have helped me put together this bike I have is a 1200 xl custom and man is great !
Glad I could help!
I love these videos
Thank You
Great information thanks for sharing. Will definitely try the grease on the oil pump gaskets.
Not just grease, white lithium.
I’ve had bad luck with cheap gaskets before and now try to use the best I can. The felt pads inside the panhead rocker box is something I’ve not heard of before, thanks for that info.
Thank You. That's how the factory did it.
mike thanks for your time very nice of you to do this
You are very welcome
Very informative in general and very interesting about the use of white lithium grease on oll pumps. BTW - all traditional greases, which are basically oils mixed with a thickening agent, are Soap-based, with the soap serving as a thickening agent.
Soaps are compounds that contain a metal, such as lithium.
Cool. My dad really knew that stuff. I guess I depended on his knowledge. Thank You.
Cool again.
Great pointers! Then a good hand cleaner for the mechanic :))
Yes indeed!
I've got some stuff called Hylomar Blue. It is a gasket dressing developed for use on WWII Merlin engines, so when I heard about it, I just had to get a tube. You know the internet and all the information you can learn lol. I haven't tried it yet, but it should be fun.
It's been around a long time. It's good stuff. I tend to use the modern developments. I seal up old bikes with modern stuff.
I love pacific Mike!
Backatcha!
keep em' coming Mike. Life's better when I can come down at sunrise, make tea, roll a smoke and catch one of your vids.
Cool. Thank You.
Hi, I’m new to the Harley scene. I want to build an EVO motor. I just wanted to tell you thanks for all the informative videos.
Welcome aboard!
Joined up Mike! SooooooSensible! Humorous lol. My Age..Older. I have 96 Road King 80cu in carb. second owner. Previous owner owned a bicycle shop in Wichita Took really good care of it. 28000 miles. After buying and breaking in Lee had Harley Dealer do something to the engine to help it run smoother at hi rpm and keep up with bigger motors. New cams I was told for it. I don't run it hard at all but have to say 70 or 80 comes smoothly n rides better with 2. Has air suspension from factory. It has all screaming eagle ignition pipes. Sounds very Harley I love it. My first Harley n I just turned 69. Had it for 5 years and kept reg maint new tires 20000 mile check by dealer just had 30000 done. Had handlebar rubbers replaced carb that was rebuilt twice already done again. By Phoenix Motors in Augusta Ks. Got it bk from him and rubs far better than ever. I was just wondering if you could explain how the cams helped and what my horsepower might be the way bikes set up. Thks for your lifetime if labors n willingness to pass on. A Freat Thing Thks. Greenwood Co. Ks Flint Hills.Some of the most beautiful rides in U.S.A
Hard to say horsepower. But the cam decides how far the valves open and how long it keeps them open. That was a simple answer to a complicated question. More fuel and air comes in and goes out, makes more power.
@@pacificmike9501 lesson no.1 received! Ride On
Very much appreciate, and enjoy your videos
Glad you like them!
Good solid information and backed-up with a lifetime of experience. Thanks.
Glad it was helpful!
Great video as always. I've been following you for a while and you've helped me out a lot on my '58 pan build. Big fan, keep it up!
Awesome! Thank you!
Hi my brother, thanks for the info.
You bet
Thanks Mike , your a pool of knowledge for us DYIer's
Hope you enjoy it.
Hi Mike. Im happy to watch your seals observation and remembering last centiry when as you told, paper seal was wide used… and create a lot problem for assembly , leaking and dismounting while parts was friyed each other due high temp.you could add one or two more greases, one for hands cleaning and onother for skin protection i use sometimes in some instances.
See U…
Thank You.
Thank you
You're welcome
Rocker box gaskets were a curse, till the foamet gaskets.
There's a good idea.
Love the white lithium tip, mike.thanka brother
You bet
Thanks Mike! Great video 🤠
Glad you enjoyed it
Much appreciated tips and advice. May come in handy for me regarding the pan head I emailed you about today.
I'll look for it. Thank You.
I'll look for it. Thank You.
Thanks for sharing!
Thanks for watching!
Thanks Mike. Just what I was looking for.
Glad I could help!
Thanks for the quick response. I might not have been clear though, I was referring to the inside of the cases where I have seen people use a red enamel.
Just don't know if this is the right way to go.
Thanks again.
Its a good question. Old motor builders did this a lot. It filled the porosity of the case material and didn't hold oil. The oil ran right down the sides of the case. There may be more answers out there. I welcome them.
Weight on Brother. The video is great. I wonder if the spray copper will get gaskets to stay in place while assembling bolting on parts??? Im going to use it Mike and see. How u feeling the past few weeks?? U got a cool little bike shop. Ben watching ur videos for well over a yr .
If you let the stuff dry to "tacky," then press it in place, it will probably do it. It won't support any weight though. I'm good, and hope you are too.
On my old 69FL I installed a stud and eliminated the high use exhaust flange bolt. I put some chrome acorn nuts and split locks on the studs to pull that exhaust flange up tight. Worked good, looked good. Its partly that old dissimilar metal problem and partly a bad design IMHO.
The design was fine with a one piece, properly installed exhaust headpipe. Then came dual pipes on the FX's and all of us that just had to have custom pipes. And, we used Shovelheads to learn a lot of stuff and make a lot of mistakes. Must support all exhaust systems well. Yes, it took 'til 1984 for Harley to mount exhaust systems to the heads nicely.
Another great informative video. Thanks Mike! 🇨🇦
Thank You.
Thanks for another great video Mike!
Thanks for watching!
Thanks Mike
Thank You.
Thanks Mike! Once again great video....
Glad you enjoyed it
@@pacificmike9501 Time to get off work Pop on on a little Merl Haggard and start wrenching
Thanks Mike! Always great info!
Thanks for watching!
Great advice, thank you, Mike.
You're very welcome
Your just a outstanding man mike ..🍻🇺🇸
Thank You
Great job Mike 😎 Art from Reno NV
Thank You.